Step-1
Microchip Registration link
https://mu.microchip.com/page/embedded-system-design Click Here
Step -2
Click
Here
Go through the Create a new account option
Step -3
Click Here
Step -4
1.Need to fill all the details
Choose Personal
Cuntd…
Enter your mail id here
1. Enter your mail id
2. Set your password and password should be 8-15
character. 1 letter and 1 number must be there.
3. Confirm your password again.
4. Fill all your information.
5. Country code is 91 for INDIA
6. After fill all the details click on register
Click here account option
1. Now you have registered successfully.
2. Then you need to click on your profile option.
Click
Here
• Here you can check you have successfully registered yourself
Step-5
Click the below link
8Bit Microcontrollers: Architecture of the PIC16
https://mu.microchip.com/8-bit-microcontrollers-architecture-of-the-pic16
Step-6
CLICK ON REGISTER OPTION
Step-7
CLICK ON START BUTTON
Step-8
Click Here
After completing one module you need to
click on the NEXT button.
Step-9
Click Here
After completing all modules you need to
share your FEEDBACK.
Step-10
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Click here
Step-11
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Click Here
Step-12
You need to click on Download the PDF option.
Click Here
Sample Certificate
Step -13
click on the below link.
• Introduction to MPLAB X IDE (includes blink LED) -
https://mu.microchip.com/intro-to-the-mplab-x-ide Click Here
Step-14
Click Here
Step-15
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-16
Click on start button
Click here
Step- 17
After completing one module you need to click on the NEXT button
Click Here
Step-18
Click Here
After completing all modules you need to
share your FEEDBACK.
Step-19
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Click Here
Step- 20
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Download your certificate
Click Here
Step-21
click on the below link
• Getting Started with PIC16 MCUs using MICC and State Machines -
https://mu.microchip.com/getting-started-with-pic16f1xxx-mcus- Click Here
using-mcc-and-state-machines
Step-22
Click Here
Step-23
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-24
Click on the start button.
Click Here
Step- 25
After completing one module you need to click on
the NEXT button
Click Here
Step -26
Click Here
After completing all modules you need to
share your FEEDBACK.
Step-27
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Step-28
.Then you need to click your Profile option
. Then you need to click on the view certificate option.
Step-29
Click on Download the certificate
Click Here
. Sample certificate
Introduction to Embedded C
Step- 30
click on the below link.
• Syntax and Structures of C -https://mu.microchip.com/syntax-and-structure-of-c Click Here
Step-31
Click Here
Step-32
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-33
Click on start button to start the course.
Click Here
Step-34
After completing one module you need to click on the NEXT button
Step-35
After completing all modules you need to share your FEEDBACK.
Step-36
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Step-37
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Step-38
Click on Download the Certificate option and get
your certificate.
Click Here
Step-39
click on the below link.
Advanced C Programming –
https://mu.microchip.com/advanced-c-programming Click Here
Step- 40
Click Here
Step-41
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-42
Click on the start button to start the course
Click Here
Step-43
After completing one module you need to click on the NEXT button
Step-44
After completing all modules you need to share your
FEEDBACK.
Step-45
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Click Here
Step-46
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Step-47
. Click on the download option and get your certificate
Step- 48
click on the link to start the course
C Programming: Linked List Data Structures
Click
https://mu.microchip.com/c-programming-linked-list-data-structures Here
Step-49
Click Here
Step-50
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-51
Click on the start button to start the course
Click Here
Step-52
After completing one module you need to click on the NEXT button
Step-53
Click Here
After completing all modules you need to share your
FEEDBACK.
Step-54
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Step-55
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Step-56
. Click on the download option and get your certificate
Step-57
click on the below link.
C Programming Callbacks
https://mu.microchip.com/c-programming-callbacks Click Here
Step-58
Click Here
Step-59
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-60
Click on the start button to start the course
Click Here
Step-61
After completing one module you need to click on the NEXT button
Step-62
After completing all modules you need to share your
FEEDBACK.
Click Here
Step-63
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion
certificate.
Step-64
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Sample certificate
Step-65
click on the link to start the course
Advanced Embedded C Tips, Tricks, and Cautions
https://mu.microchip.com/advanced-embedded-c-tips-tricks-and- Click
cautions Here
Step-66
Click Here
Step-67
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-68
Click on the start button to start the course
Click Here
Step-69
After completing one module you need to click on the NEXT button
Step-70
After completing all modules you need to share
your FEEDBACK.
Click Here
Step-71
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion certificate.
Step-72
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Sample certificate
Step-73
Click on below link
IoT - some good conception coverage in #1 but focused mainly on wifi.
Unfortunately, practical example is BlueTooth, Sensor example is click
based.Design Considerations for Your First IoT Project (concepts) –
https://mu.microchip.com/design-considerations-for-your-first-iot-
project/586342 Click Here
Step-74
Click Here
Step-75
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-76
Click on the start button to start the course
Click Here
Step-77
After completing one module you need to click on the NEXT button
Step-78
After completing all modules you need to share
your FEEDBACK.
Click Here
Step-79
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion certificate.
Step-80
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Sample certificate
Step-81
Click on the below link
Exploring Bluetooth Low Energy from First Steps to Final App
https://mu.microchip.com/exploring-bluetooth-low-energy-ble-for-
simple-applications/611848
Step-82
Click Here
Step-83
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-84
Click on the start button to start the course
Click Here
Step-84
After completing one module you need to click on the NEXT button
Step-85
After completing all modules you need to share your FEEDBACK
Click Here
Step-86
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion certificate.
Step-87
. Then you need to click your Profile option
. Then you need to click on the view certificate option.
Sample certificate
Step-88
Click on the below link
Creating a Sensor Node for Azure IoT Central
https://mu.microchip.com/creating-a-sensor-node-for-azure-iot- Click Here
central
Step-89
Click Here
Step-90
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-91
Click on the start button to start the course
Click Here
Step-92
After completing one module you need to click on the NEXT button
Step-93
After completing all modules you need to share
your FEEDBACK
Click Here
Step-94
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion certificate.
Step-95
. Then you need to click your Profile option
. Then you need to click on the view certificate option
Sample certificate
Step-96
Click on the below link
• Motor Control Workshop using dsPIC® Digital Signal
Controllers (DSC) Dual Core Devices
https://mu.microchip.com/motor-control-workshop-using-dspic-
digital-signal-controllers-dsc-dual-core-devices
Step-97
Click Here
Step-98
Enter your registered mail id and password
Enter Here Mail Id
Enter your Password
Click here
Step-99
Click on the start button to start the course
Click Here
Step-100
After completing one module you need to click on the NEXT button
Step-101
After completing all modules you need to share
your FEEDBACK
Click Here
Step-102
1. After giving your
feedback Click on
Done option.
2. Then you will get
your Course
completion certificate.
Step-103
. Then you need to click your Profile option
. Then you need to click on the view certificate option
Sample certificate
For any query kindly join the Telegram Group
https://t.me/+odyEt5dKE0E5ZWY1
