Scribd
Upload
265 views1 page

Beam Reinforcement Design Analysis

The document summarizes the finite element analysis and reinforcement design of an existing beam. The beam is modeled with 13 elements and connections are added to a new side member. The analysis finds maximum moments of 10 ft-kips and shear of 1.2 kips. Stress checks on the existing beam and new member are below the allowable values, indicating the design is adequate with 24 bolts added for reinforcement.

Uploaded by

Ridho Ziska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
265 views1 page

Beam Reinforcement Design Analysis

The document summarizes the finite element analysis and reinforcement design of an existing beam. The beam is modeled with 13 elements and connections are added to a new side member. The analysis finds maximum moments of 10 ft-kips and shear of 1.2 kips. Stress checks on the existing beam and new member are below the allowable values, indicating the design is adequate with 24 bolts added for reinforcement.

Uploaded by

Ridho Ziska
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

PROJECT : PAGE :

CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Beam Reinforcement Design by Finite Element Method

INPUT DATA & DESIGN SUMMARY


DIMENSION
L12 = 2 ft
L23 = 14 ft
L34 = 4 ft

EXISTING BEAM D= 13.5 in


B= 3.5 in

E' = 620 ksi, Modulus of Elasticity THE DESIGN IS ADEQUATE.


Fb' = 0.9 ksi, ASD, Adjusted Design Value D sup = 1.11 in @ 9.00 ft, from left.
F v' = 0.12 ksi, ASD, Adjusted Design Value ( L / 216 )
Total 24 Bolts / Lag Screws at One Side.
NEW SIDE MEMBER d= 12 in
b= 0.75 in EXISTING MAX MOMENT BEFORE REINFORCEMENT
No. = 2 , Both Sides Mint = 0.7 ft-kips, ASD, without Shoring Reduced
E' = 900 ksi, Modulus of Elasticity Vint = 0.3 kips, ASD
Fb' = 2.1 ksi, ASD, Adjusted Design Value
MAX SECTION FORCES AFTER REINFORCEMENT
CONNECTOR SHEAR CAPACITY (One Side Face, Wood Control) Msup = 10 ft-kips, ASD, from Superimposed Loads
Z' = 1470 lbs per Bolt / Lag Screw Vsup = 1.2 kips, ASD

ANALYSIS

The max D on Msup from uniform load, ( 0.2 kips/ft)


Joint X Y load D
Number in in kips in
1 0 7 0.1 0
Finite Element Method 2 12 7 0.2 0.18
Element Joint L (in) A (in2) I (in4) E (ksi) M (ft-k) V (kips) N (kips) 3 24 7 0.45 0.36
1 1 2 12.0 47.25 717.61 620 1.90 -1.90 0.00 4 66 7 0.7 0.86
2 2 3 12.0 47.25 717.61 620 3.60 -1.70 0.00 5 108 7 0.7 1.11
3 3 4 42.0 47.25 717.61 620 5.49 -0.86 -0.84 6 150 7 0.7 1.05
4 4 5 42.0 47.25 717.61 620 6.82 -0.38 -1.30 7 192 7 0.55 0.69
5 5 6 42.0 47.25 717.61 620 6.83 0.10 -1.40 8 216 7 0.4 0.37
6 6 7 42.0 47.25 717.61 620 6.46 0.58 -1.15 9 240 7 0.2 0
7 7 8 24.0 47.25 717.61 620 6.40 1.40 0.00 10 24 6 0 0.36
8 8 9 24.0 47.25 717.61 620 3.60 1.80 0.00 11 66 6 0 0.86
9 10 11 42.0 18.00 216.00 900 2.43 -0.39 0.84 12 108 6 0 1.11
10 11 12 42.0 18.00 216.00 900 3.00 -0.17 1.30 13 150 6 0 1.05
11 12 13 42.0 18.00 216.00 900 2.99 0.05 1.40 14 192 6 0 0.69
12 13 14 42.0 18.00 216.00 900 2.85 0.27 1.15
13 3 10 0.8 178.50 52479.00 29000 1.11 0.84 0.39 The Max Shear Connection Stress
14 4 11 0.8 178.50 52479.00 29000 -0.02 0.46 -0.22 f = (V2 + N2)0.5 / d2 + M / (0.208 d3)
15 5 12 0.8 178.50 52479.00 29000 0.00 0.10 -0.22 = 72 psf
16 6 13 0.8 178.50 52479.00 29000 0.02 -0.25 -0.22 Total Connectors
17 7 14 0.8 178.50 52479.00 29000 -1.91 -1.15 0.27 n = A f / Z' = 24 , one side only

Existing Beam : Fb ' = 900 psi > fb = (Mint + Mmax) / S = 849 psi [Satisfactory]
Fv' = 120 psi > fv = 1.2 (Vint + Vsup) / A = 100 psi [Satisfactory]

New Side Member : Fb ' = 2100 psi > fb = Mmax / S = 999 psi [Satisfactory]

You might also like