Scribd
Upload
164 views1 page

Prestressed Composite Section Design

This document provides a design summary for a prestressed composite beam section. Key details include: the beam will have a 10 inch deep girder with a 4 inch wide flange supported every 2.5 feet; materials strengths of 3 ksi for the flange concrete, 6 ksi for the girder concrete, and 60 ksi for rebar; an effective span of 25 feet; and a factored shear of 16 kips. Analysis shows the section meets strength requirements with a nominal shear capacity of 19.8 kips exceeding the factored load of 16 kips. Stresses in the flange and girder concrete are also within allowable limits.

Uploaded by

Mukhlish Akhatar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
164 views1 page

Prestressed Composite Section Design

This document provides a design summary for a prestressed composite beam section. Key details include: the beam will have a 10 inch deep girder with a 4 inch wide flange supported every 2.5 feet; materials strengths of 3 ksi for the flange concrete, 6 ksi for the girder concrete, and 60 ksi for rebar; an effective span of 25 feet; and a factored shear of 16 kips. Analysis shows the section meets strength requirements with a nominal shear capacity of 19.8 kips exceeding the factored load of 16 kips. Stresses in the flange and girder concrete are also within allowable limits.

Uploaded by

Mukhlish Akhatar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd

PROJECT : PAGE :

CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
Prestressed Composite Section Design
INPUT DATA & DESIGN SUMMARY
FLANGE STRENGTH fc,'f = 3 ksi
GIRDER STRENGTH fc,'w = 6 ksi
REBAR YIELD STRESS fy = 60 ksi
EFFECTIVE SPAN L = 25 ft
GIRDER SPACING S = 2.5 ft
GIRDER WIDTH bw = 4 in
FLANGE DEPTH hf = 2 in
GIRDER DEPTH hw = 10 in
FACTORED SECTION SHEAR Vu = 16 k
PROPPED ? (1=YES, 2=NO) = 2 No
INTERFACE TIES 2 # 4 @ 16 in o.c.
CONTACT SURFACES (1=CLEAR, 2=INTENTIONALLY ROUGHENED) 2 Intentionally Roughened
EFFECTIVE PRESTRESS Pe = 52 k REMOVAL OF PROPS MProp = 8.58 ft-k
GIRDER SELF WEIGHT M G = 3.3 ft-k FORMWORK MSht = 2 ft-k
FLANGE CONCRETE MF = 5 ft-k SUPERIMPOSED D+L MW = 15.5 ft-k

ANALYSIS
FLANGE MODULUS Ef = 3122 ksi GIRDER PROPERTIES : Ac = 40 in2
GIRDER MODULUS Ew = 4415 ksi Ic = 333 in2
MODULAR RATIO, Ew / Ef n = 1.41 Sb = S b = 66.67 in3

L b f ( eff )
b f ( eff ) MIN , b w 16h f , S 30.0 in b f ( trans ) 21.2 in
4 n
Ay
yc 8.09 in 2
I cc I A y y c A
2
1089 in4
A

I cc I cc I cc
S ct 278 in3 S ci 569 in3 S cb 135 in3
hc y c hw yc yc
50
v Av 0.006 > min ###
b ws fy

80 d
bw


V nh MIN 260 0.6 v f y bwd , 500bwd <= applicable Vu < V nh 19.8 k

MIN Avf f y , 0.2 f c' Ac , 800 Ac [SATISFACTORY]

ft = 1.854 ksi
fb = 0.746 ksi
fct = 0.412 ksi
fcb = -0.458 ksi > 6 f 'c
fci(flan) = 0.201 ksi
fci(web) = 2.138 ksi < '
0.6 f c
[SATISFACTORY]

You might also like