Scribd
Upload
170 views1 page

T ShapeCapacity

This document summarizes the capacity design check of a T-shaped steel member according to AISC 360-10 specifications. It provides the member dimensions, material properties, loads applied, and calculations for checking limiting width-thickness ratios, combined compression and bending capacity, and shear capacity. All design checks were found to be satisfactory based on the given criteria.

Uploaded by

Amey Gudigar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
170 views1 page

T ShapeCapacity

This document summarizes the capacity design check of a T-shaped steel member according to AISC 360-10 specifications. It provides the member dimensions, material properties, loads applied, and calculations for checking limiting width-thickness ratios, combined compression and bending capacity, and shear capacity. All design checks were found to be satisfactory based on the given criteria.

Uploaded by

Amey Gudigar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECT : PAGE :

CLIENT : DESIGN BY :
JOB NO. : DATE : REVIEW BY :
T-Shape Member Capacity Based on AISC 360-10

INPUT DATA & DESIGN SUMMARY


T-SHAPE SIZE bf = 12 in tf = 2.74 in A= 45.7 in2
d= 11.2 in tw = 1.52 in y= 2.94 in
yp = 1.91 in
STEEL YIELD STRESS Fy = 50 ksi Ix = 387 in4
Iy = 397 in4
AXIAL FORCE (plus sign for compression) P= 10 kips, ASD
STRONG GEOMETRIC AXIS EFFECTIVE LENGTH kLx = 20 ft
WEAK GEOMETRIC AXIS EFFECTIVE LENGTH kLy = 10 ft

STRONG GEOMETRIC AXIS BENDING MOMENT Mrx = 70 ft-kips, ASD, THE STEM IN TENSION ? Yes (stem tension)
STRONG GEOMETRIC AXIS BENDING UNBRACED LENGTH Lbx = 20 ft, (AISC 360-10 F9.2 & F2.2.c)
STRONG DIRECTION SHEAR LOAD, ASD Vstrong = 300 kips

WEAK GEOMETRIC AXIS BENDING MOMENT Mry = 150 ft-kips, ASD


WEAK GEOMETRIC AXIS BENDING UNBRACED LENGTH Lby = 10 ft
WEAK DIRECTION SHEAR LOAD, ASD Vweak = 500 kips

THE DESIGN IS ADEQUATE.

ANALYSIS
CHECK LIMITING WIDTH-THICKNESS RATIOS (AISC 360-10, Table B4.1)
0.5 (bf - tw) / tf = 1.91 < 1.0 (E / Fy)0.5 = 24.08 [Satisfactory]
d / tw = 7.37 < 0.75 (E / Fy)0.5 = 18.06 [Satisfactory]

CHECK COMBINED COMPRESSION AND BENDING CAPACITY (AISC 360-10, H1)

P r 8 M r ,x M r , y Pr
, for 0.2
c
P 9 M M P
c ,x c, y c
0.96 < 1.0 [Satisfactory]
P r M r ,x M r , y
, for P r 0.2

2 P M c, x M c, y Pc
c
Where Pc = Pn / Wc = 1386 / 1.67 = 829.85 kips, (AISC 360-10 Chapter E4a or D2)
> Pr = 10.00 kips [Satisfactory]
Mc,x = Mn / Wb = 312.64 / 1.67 = 187.21 ft-kips, (AISC 360-10, F9)
> Mr,x [Satisfactory]
Mc,y = Mn / Wb = 431.36 / 1.67 = 258.30 ft-kips, (AISC 360-10, F6)
> Mr,y [Satisfactory]

CHECK SHEAR CAPACITY (AISC 360-10, G2)


Vn,strong / Wv = 510.7 / 1.67 = 305.8 kips > Vstrong = 300.0 kips [Satisfactory]

Vn,weak / Wv = 986.4 / 1.67 = 590.7 kips > Vweak = 500.0 kips [Satisfactory]

You might also like