Alcatel OXO IPBX Installation Guide
Uploaded by
ScribdTranslationsAlcatel OXO IPBX Installation Guide
Uploaded by
ScribdTranslationsIMPLEMENTATION OF AN ALCATEL OXO IPBX TBAC SENTR
INSTALLATION AND CONNECTION OF an IP SWITCHBOARD (IPBX)
Objectif : Réalisation d'Installation téléphonique mixte (analogique, numérique et IP)
1. Scenario: You are working in pairs, each student writes a report.
rendered.
You have
• of an Omni PCX Office (OXO) with the following configuration:
Compact Unit (or compact edition), Very Small, Software pack R.5, Pack with
voicemail
1 mixed card AMIX4/8/4 with 4 analog network lines (connection to PABX or
outdoor), 8 UA reflex ports, 4 ports for analog stations.
1 CPU card-3m (ISDN/2 TO + SLI + LAN).
• of a diverse range of phones (analog, digital, and IP)
• from a PC for the configuration of the IPBX and to consult the documentation (HP6703/1)
• the complete documentation of all equipment in digital format
(partition F:)
Simplified diagram of the installation
RTC
Analog
IPBX OXO Management position
LAN
Digital
IP
Remarks:
• The management workstation is a PC equipped with OMC software.
• The IP phone represents a set of hardware connected to the LAN network (IP phone or
softphone).
• During the lab session, you must take notes to enrich your report.
• To avoid IP address conflicts, the entire system must not be connected to the
existing networks.
[Link] Page 1/4
IMPLEMENTATION OF AN ALCATEL OXO IPBX TBAC SENTR
2-Preparation, first study of the documentation (installation manual 188
pages doc expert 1066 pages !):
Here is a simplified view of the IPBX, which is composed of several modules (depending on the version).
2.1 What version of OXO is available to you? What are the installed modules on
your model? Describe the role of each module.
2.2 What devices (phones) are compatible with your IPBX? Can any phone be used?
Which brand of analog, digital, or IP phone?
Group your responses in a table. (doc Expert OmniPCX p 47 and 48). Compare by
regarding the equipment in your possession.
2.3Study of connectivity
CPU-3m card
AMIX card 4/8/4-1 (OmniPCX installation manual doc ch2.4)
9 16
1 8
• With the help of the documentation, what type of interface can we connect an analog terminal (so-called
What is the name of the phone provided to you?
• Using the documentation, on what type of interface can a digital workstation be connected?
"UA post")? Provide the reference and name of the phones made available to you.
• With the help of the documentation, on what type of interface can the telephone network be connected?
RTC (arrival line PTT p4-2).
• Where will you connect the 'IPtouch 4028' phones?
• What technology is "symbolized" by the acronym TO
[Link] Page 2/4
IMPLEMENTATION OF AN ALCATEL OXO IPBX TBAC SENTR
3. Installation and internal testing.
3.1. Connect the different phones. Call the teacher.
3.2. Can the installation work without the autocom configuration? Make a table of
correspondence between the name, the model, and the assigned number.
3.3. Make test calls between the different phones. Did these calls go through? Will they be
billed?
3.4. Make a test call on your mobile with the different phones. Did these calls have
What is about? Will these calls be charged? Justify your answers.
4- Installation of the OMC management tool (doc Expert OmniPCX p923).
OMC is the administration and configuration tool for Alcatel OmniPCX Office; this application on PC.
it allows programming, among other things, the voice functions of the system, the numbering plan, and messaging
voice, the network, internet access and downloading (depending on the options), etc.
4.1. Establish a connection between the management software and the OmniPCX (refer to OmniPCX Expert doc p 928 and
The OmniPCX uses its default IP address.
4.2. Navigate through the different menus to find the various positions as well as their
numbers Can we change the numbering plan? In which menu? Attention, do not
modifier.
You will not be asked to establish a schedule for the installation based on a specifications document.
4.3. Replug the phones, following the numbering plan of the software (The ports
Physiques are numbered 01-0xx-01 from left to right, and from bottom to top on the AMIX 4/8/4 card.
1).
Connect the RTC line arrival in the presence of the teacher.
4.4. Complete the diagram on the following page.
4.5. Provide in the form of a table the correspondence between the phone number, the type, the reference,
the IP address and the MAC address.
What are your impressions regarding this type of equipment? (performance, ease of use,
evolution, complexity of maintenance and programming, ...
[Link] Page 3/4
Implementation of an ALCATEL OXO IPBX TBAC SEND
IP IP
Analogique
Management position
LAN
Prize
Digital Digital
nesting
