AJAX™ INTEGRAL
ENGINE-COMPRESSOR DPC-2803
600-634 bhp, 440 rpm
Robust, reliable Ajax engines have been manufactured in the United States
longer than any other OEM brand engines, with continuous innovations
and technologies adding compliance, strength and simplicity to the original
design. The DPC-2803 integral engine compressor rated at 600-634 bhp and
features a slow-speed, two-cycle engine design that results in less wear and
fewer moving parts. It offers greater reliability and efficiency than high-speed
separable units. As a result, operating costs are substantially lower over the
life of your equipment. Over 460 DPC-2803s have been built. The DPC-
2803 is the economic choice for a variety of applications, including gas
gathering, injection, processing, transmission, and fuel gas boosting.
Benefits Features
› Minimum maintenance › Integral crankshaft design
› Higher availability › Slow operating speed
› Higher resale value › Fewer moving parts
› Reduced parts stocking requirements › Technically current design
› Single source responsibility available › Low-cycle, low BMEP engine
› More gas compressed per BHP than › Larger valve area
high-speed separable units
› Higher mechanical efficiency
› Flexible
Model STD LE
No. of Cylinders 3 3
Power 634 bhp (473 kWb) 600 bhp (447 kWb)
Rated Speed 440 rpm 440 rpm
Bore & Stroke 15" ×1 6" (381 mm × 406 mm) 15" × 16" (381 mm × 406 mm)
Piston Displacement 8,481 in3 (139 l) 8,481 in3 (139 l)
BMEP 67.3 psi (4.6 bar) 63.7 psi (4.4 bar)
Piston Speed 1,173 ft/min (6 m/s) 1,173 ft/min (6 m/s)
Legends don’t stop. We make sure of it.™
Call +1-844-RECIP-43 (international: +1-713-354-1299)
24/7 TECH SUPPORT: SUPPORT@[Link]
[Link]
Model STD LE
Fuel Gas System 1
Fuel pressure range 150 psi (10.3 bar) 150 psi (10.3 bar)
Exhaust System 2
Exhaust Temperature 465°F (241°C) 515°F (268°C)
Exhaust Flow 174 lb/min (79 kg/min) 179 lb/min (81 kg/min)
Cooling Water System
Capacity 90 gal (341 l) 90 gal (341 l)
Lube Oil System 3
Capacity 58 gal (220 l) 58 gal (220 l)
Consumption 21 pints/day (9.9 l/day) 20 pints/day (9.5 l/day)
Crankcase Makeup 4.3 pints/day (2 l/day) 4.3 pints/day (2 l/day)
Brake Specific Fuel Consumption
100% Load (LHV) 8,000 Btu/bhp-hr (11,319 kJ/kWh) 7,800 Btu/bhp-hr (11,036 kJ/kWh)
Engine Emissions 2
NOx 12 g/bhp-hr 2 g/bhp-hr
CO 1.2 g/bhp-hr 1.2 g/bhp-hr
NMHC 0.7 g/bhp-hr 0.6 g/bhp-hr
VOC 0.5 g/bhp-hr 0.5 g/bhp-hr
Formaldehyde 0.3 g/bhp-hr 0.3 g/bhp-hr
CO2 469 g/bhp-hr 458 g/bhp-hr
Compressor Specifications
No. of Throws 2 2
Stroke 11" (279 mm) 11" (279 mm)
Piston Speed 807 ft/min (4 m/s) 807 ft/min (4 m/s)
Rod Load 40,000 lb (178 kN) 40,000 lb (178 kN)
Rod Diameter 2.5" (64 mm) 2.5" (64 mm)
Crankshaft Centerline 20" (508 mm) 20" (508 mm)
Dry Weight
Frame Weight 31,500 lb (14,288 kg) 31,500 lb (14,288 kg)
Dimensions
Frame Length 158" (4,013 mm) 158" (4,013 mm)
Frame Width 125" (3,175 mm) 125" (3,175 mm)
Frame Height 74" (1,881 mm) 74" (1,881 mm)
Stack Diameter 17¼" (438 mm) 17¼" (438 mm)
Stack Height 303" (7,696 mm) 241" (6,121 mm)
Flywheel
Outside Diameter 48" (1,219 mm) 48" (1,219 mm)
Weight 2,200 lb (998 kg) 2,200 lb (998 kg)
1
Fuel gas system pressure noted is maximum pressure at customer connection
2
Exhaust and emissions noted based on: PLQNG, 1500 FASL elevation, 65°F ambient temperature for STD and LE
3
Lube oil system consumption rates based on full load and full speed operation. Values do not indicate break-in consumption rates.
Legends don’t stop. We make sure of it.™
Call +1-844-RECIP-43 (international: +1-713-354-1299)
24/7 TECH SUPPORT: SUPPORT@[Link]
[Link]
© 2020 GE Oil & Gas Compression Systems, LLC – All rights reserved. AJI20023 04/2020
GE Oil & Gas Compression Systems, LLC reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Con-
tact your Cooper Machinery Services representative for the most current information. Ajax, the Ajax logo and the Cooper Machinery Services logo and tagline are trademarks of GE Oil & Gas Compression
Systems, LLC.
