1

1
 Table of Contents 1
Section 1

Petroleum
Air Distributor & Accessories...............................................................1-206 & 213 – 1-214
Air Interlock Valves.......................................................................................... 1-102 – 1-107
API Bottom Loading Rack Coupler.................................................................. 1-95 – 1-101
API Dust Caps.................................................................................................... 1-116 – 1-119
API Gravity Drop Adaptors............................................................................ 1-108 – 1-115
API “Y” Valve........................................................................................................ 1-80 – 1-81
Bottom Loading Adaptors.................................................................................... 1-70 – 1-91
Drain Sumps.....................................................................................................................1-164
Dry Disconnect Adapters & Couplers............................................................. 1-241 – 1-267
Emergency Drain Plug......................................................................................................1-65
Emergency Valves.............................................................................................. 1-128 – 1-163
Gaskets..............................................................................................................................1-186
Gate Valves......................................................................................................... 1-170 – 1-172
Manholes................................................................................................................... 1-1 – 1-30
Manifold Systems ( Air ) Civacon / Betts........................................................ 1-187 – 1-212
Manifold Valve.................................................................................................................1-173
Operators & Accessories................................................................................... 1-165 – 1-169
Pressure Vacuum Vent.......................................................................................... 1-55 – 1-64
Product Delivery Elbows................................................................................... 1-215 – 1-239
Product Identification Markers........................................................................................1-92
Push Vents.............................................................................................................. 1-37 – 1-39
Sight Glasses & Roto Tags.........................................................................1-92 – 1-94 & 229
Spacers & Adapters.........................................................................................................1-184
Swivel Joints.....................................................................................................................1-240
Vapor Check Valve & Caps.............................................................................. 1-120 – 1-127
Vapor Recovery Hoods & Hose............................................................................ 1-66 – 1-69
Vapor Recovery Vents & Accessories.................................................................. 1-31 – 1-54
Welding Flanges...............................................................................................................1-185
Wet-R-Dri Valves............................................................................................... 1-174 – 1-183
1

1-1
 1

1-2
1

1-3
 1

1-4
1

1-5
 1

1-6
1

1-7
 1

1-8
1

1-9
 1

1-10
1

1-11
 1

1-12
1

1-13
 1

1-14
1

1-15
 1

1-16
1
R

16” ROUND MANHOLE WITH 10” FILL

LIGHT WEIGHT

BETTS INDUSTRIES, INC.

WARREN, PA. U.S.A.
LESS MAINTENANCE

COVERED BY PATENTS
ISSUED AND PENDING
CT-0040
LOW SILHOUETTE

NOTE: Not legal for DOT specification cargo tanks.

The 16” Manhole is fabricated for lighter weight and greater strength. The advanced design has low silhouette and clean lines.
Fill gasket will not pull out; is easily replaced. To compensate for wear, tension on fill cover is easily adjusted by adding shim
washers. Hinge pins welded in place to prevent removal. Adequate means provided for use of seal wire. One outside clamping
ring provides means for attaching cover to collar. Cover may be oriented throughout 360°. Secondary Latch is standard on all
assemblies.

Clamping Ring
Cover Plate
Fill Cover Clamping Bolt Clamping
Fill Gasket Retainer Vent Wt. Assembly No.
Strongback and Washer Bolt Nut
Shim Washer
Latch
Steel Steel Steel Zinc Plt. Brass Alum. 20.5 FVA8016SXB
Steel Zinc Plt. Steel Zinc Plt. Steel Zinc Plt. Brass Alum. 20.5 FVA8016BXB
¦ Stnls 304 Steel Zinc Plt. Steel Zinc Plt. Brass Alum. 20.7 FVA8016GXB
Stnls 304 Stnls 304 Stnls 304 Stnls 304 Alum. 20.7 FVA8016CXB
Stnls 316 Stnls 304* Stnls 304 Stnls 304 Alum. 20.7 FVA8016DXB
¦ Fill Gasket Retainer and Shims-Aluminum * Fill Cover Material-Stainless 316

Note: Manhole assemblies, as listed above, have a 6238AL vent (prefix “FVA”) and Buna-N gaskets (suffix “B”). For
variation or additional vents see catalog Section 95 for proper prefix or assembly number. For variation in gasketing
change suffix as follows.

Suffix “V” indicates Viton gaskets.

Suffix “W” indicates White Hypalon gaskets.
Suffix “T” indicates Teflon fill and collar gasket w/ White Hypalon backer

Manhole collars are available in aluminum, steel and stainless steel. Please see parts page for correct numbers.
When welding collars to tank, care should be exercised to insure collar remains flat and round.

TM

INDUSTRIES, INC. June 1998

WARREN, PA.

1-17
 1
PARTS LIST

16” Manhole w/ 10” Fill

No. Description Material Part No. No. Description Material Part No.
Steel 3021MS Steel 3028MS
Steel Zinc Plt. 3021ZC 8 Clamping Ring Steel Zinc Plt. 3028ZC
1 Fill Cover
Stnls 304 3021SL Stnls 304 3028SL
Stnls 316 3021SS B Buna-N 3559BN
Bethane 3024BU V Viton 3559VT
Manhole Gasket
Viton 3024VT 9 W Wh. Hypalon 3559WH
Channel Type
2 Fill Gasket Wh. Hypalon 3024WH Teflon Env.
T 3025TF
Non-Asbestos 3024NA w/ Wh. Hypalon
Teflon 3024TF Steel 3057MS
1
Steel 3213MS Manhole Collar /4 Aluminum 3057AE
10
Aluminum 3213AL Channel Type Stnls 304 3057SL
3 Retainer
Stnls 304 3213SL Stnls 316 3057SS
Stnls 316 3213SS 11 Vent Assembly Alum./Stnls 6238AL
Steel 3023MS 12 Gasket Buna-N 3716BN
4 Shim Washer Aluminum 3023AL
Stnls 316 3023SS Gasket Maximum Temperature
Steel Zinc Plt. 3029ZC Bethane 250°F
5 Bolt-Clamp Viton 400°F
Stnls 304 3029SL
White Hypalon 250°F
Nut-Clamp Brass 3030BR
6 3 Teflon 400°F
/8 –16 Thd. Stnls 304 9Q5809 Teflon Envelope w/ White Hypalon Insert 250°F
Steel Zinc Plt. 3031ZC Non-Asbestos 350°F
7 Washer-Clamp
Stnls 304 3031SL

MAINTENANCE: Manhole assemblies should be inspected with sufficient frequency and due regard to the products carried to insure a
liquid tight closure. Any worn, damaged or missing parts must be replaced. Gaskets should be replaced if their effectiveness is impaired
in any way. Replacement gaskets must be compatible with products carried. Adjustment due to gasket wear may be necessary to insure
proper sealing of the 10” fill. A shim washer, item No. 4, is provided for this purpose. To increase the sealing force of the 10” fill, remove
shim from location shown above and re-position it above fill cover No. 1.

WARNING Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper
functioning of this product.

TM

INDUSTRIES, INC. Sept 1996

WARREN, PA.

1-18
1
16” INSPECTION MANHOLE
Clamp Ring Style

• EASILY INSTALLED

• LOW MAINTENANCE

• ECONOMICAL

Tiona Inspection Manholes provide quick, safe entrance and exit from your tanks. Heavy gauge metal and welded
construction minimizes maintenance. Manholes are certified and marked in accordance with 49CFR178.345-5 with a
test pressure of 36 psi [2.48 bar].

Clamping Bolt Clamping

Cover Plate Clamping Ring Weight Assembly No.
and Washer Bolt Nut
15.8 lb.
Steel Zinc Plt. Steel Zinc Plt. Steel Zinc Plt. Brass [7.2 kg]
8007BX*
16.4 lb.
Stnls 304 Stnls 304 Stnls 304 Stnls 304 [7.4 kg]
8007CX*
16.4 lb.
Stnls 316 Stnls 304 Stnls 304 Stnls 304 [7.4 kg]
8007DX*

Letter Gasket Material Temp. Range

* Add letters to part number to designate seal material. See B Buna-N -40°F to +220°F
[-40°C to +104°C]
material table at right for designation.
V Viton -20°F to +400°F
[-29°C to +204°C]

P EPDM (White) -40°F to +260°F

[-40°C to +127°C]

W White Hypalon -40°F to +250°F

“X” in assembly number designates manhole collar sold [-40°C to +121°C]
separately. Collars are available in aluminum, steel and PTFE Envelope w/
T -40°F to +250°F
stainless steel. Please see parts page for part numbers. White Hypalon Insert [-40°C to +121°C]

During installation and welding to the tank, care should be exercised to insure collars remain flat and round. If
necessary, a welding fixture should be used to prevent distortion.

TM

 July 2008

WARREN, PA.

1-19
 1
Parts List
16” Inspection Manhole

NO. REQ. DESCRIPTION MATERIAL PART NO.

B Steel Zinc Plated 3026ZC
1 1 Cover Plate C 304 Stainless Steel 3026SL
D 316 Stainless Steel 3026SS
Steel Zinc Plated 3029ZC
2 1 Bolt – Clamp Ring (3/8 – 16 Thd.) *
304 Stainless Steel 3029SL
Brass 3030BR
3 1 Nut – Clamp Ring (3/8 – 16 Thd.) *
304 Stainless Steel 9Q5809
Steel Zinc Plated 3031ZC
4 1 Washer – Clamp Ring *
304 Stainless Steel 3031SL
Steel Zinc Plated 3028ZC
5 1 Clamp Ring
304 Stainless Steel 3028SL
B Nitrile (Buna-N) 3559BN
V FKM (Viton) 3559VT
Manhole Gasket (Channel Style)
P EPDM (White) 3559WE
6 1
W White Hypalon 3559WH
PTFE Envelope w/
Manhole Gasket (Flat Style) T 3025TF
W. Hypalon Insert
Steel 3057MS
¼” Aluminum 3057AE
7 1 Manhole Collar (Sold Separately)
304 Stainless Steel 3057SL
316 Stainless Steel 3057SS

* Use part # 4121ZC001 for kit with Nut (3), Bolt (2), and Washer (4).

MAINTENANCE: Manhole assemblies should be inspected with sufficient frequency and due regard to the products
carried to insure a liquid tight closure. Any worn, damaged or missing parts must be replaced. Gaskets should be
replaced if their effectiveness is impaired in any way. Replacement gaskets must be compatible with products carried.

WARNING: Use only genuine BETTS INDUSTRIES INC. replacement parts. Substitute parts can impair the proper
function of this product.

TM
July 2008

1-20
1
R

10” PAF 406-98 PRESSURE RELIEF VALVE

DOT 406 RELIEF VALVE/10” FILL

LESS THAN 1 LITER LEAKAGE

SET PRESSURE ADJUSTMENT

SECONDARY SAFETY LATCH

-----------------------------------------------------------------------------------------------------------------
Pressure Relief Valve setting 3.63 psig
-----------------------------------------------------------------------------------------------------------------
Rated Pressure Actuated Emergency Venting:
494,084 cu. Ft. free air per hour @ 6.25 psig
-----------------------------------------------------------------------------------------------------------------
Rated Liquid Flow Capacity 1335 gpm @ 5.0 psig
-----------------------------------------------------------------------------------------------------------------

The 10” relief valve provides emergency pressure relief and meets the 1 liter surge leakage limit imposed by DOT 406
Specifications in 49CFR178.345-10(b)(3)(ii). Also legal for replacement on MC306 specification cargo tanks. The relief vale
also serves as a 10” latch style fill which can be easily opened to provide access for filling the tank or for inspection. Relief
valves contain an adjustment feature to allow for fine-tuning of set pressure in the field. Other standard features include
model 6496ALB pressure-vacuum vent mounted in the 10” relief valve cover.

Hinge Pin
Latch Hinge
Collar Cover Cotter Pin Spring Normal Vent Wt. (lb) Assembly No.
Arm
Washer
Steel Steel 18.9 PPVL710BSB
Aluminum Zinc Plt. Aluminum Van Steel 15.9 PPVL710BAB
Stnls 304 Aluminum
Stnls 304 Stnls 304 “E” Coated “E” Coated 18.9 PPVL710CCB
Stnls 316 Stnls 304 18.9 PPVL710DDB

NOTE: Relief Valve assemblies, as listed above, have Buna-N gaskets (suffix “B”). For variation in gasketing change last letter
of assembly number as follows.
Suffix “V” indicates Viton gasket
Suffix “W” indicates White Hypalon gasket
Suffix “T” indicates Tef-Sil gasket
When welding collars to tank, care should be exercised to insure collar remains flat and round.

TM

INDUSTRIES, INC. March 2000

WARREN, PA.

1-21
 1
PARTS LIST

10” PAF 406-98 PRESSURE RELIEF VALVE

No. Description Material Part No. No. Description Material Part No.
1
1 Fill Cover Alum/E-Coated 8297ALEY 9 /2” NPT Plug Zinc Plt. Steel Zinc Plt. 9V4907
1a Fill Cover (O-Ring Grvd.) Alum/E-Coated 8297ALEY389 11 Stem O-Ring –112 Buna-N 4118BN
Buna-N 3119BN 12 Cylinder O-Ring –137 Buna-N 4015BN
Gasket -
2 Viton 3119VT 13 O-Ring Retainer Alum/E-Coated 4117ALEY
Integral Relief Valve
Wh. Hypalon 3119WH 14 Retainer Ring Stnls 304 9Q4961
2a O-Ring Tef-Sil 3902TS 15 Bellows EPDM 4020EPDM
7
3 Vent Assembly Aluminum 6496ALB 16 Lockwasher Ext. Tooth /16” Stnls 304 9Q5961
7
4 Gasket Buna-N 3716BN 17 Nut Hex /16-20UNF Stnls 304 9Q5960
5 Cylinder Assembly Aluminum 6657AL 18 Plastic Plug Polyethylene 9Z6163
6 Piston Aluminum 6654AL 19 Cylinder O-Ring –137 Tef-Sil 4015TS
3
7 Stem Stnls 304 6688SL 20 /8-16UNC Hex Nut w/ Insert Steel Zinc Plt. 9Q5896
8 Spring Steel 4122MS

Gasket Maximum Temperature

Buna-N (Nitrile) 250°F
Viton 400°F
White Hypalon 250°F
Teflon-Silicone 400°F

Replace oil in cylinder using Automatic Transmission Fluid Dexron III/Mercon, SAE 5W-20 with viscosity of 177 SUS at 100°F
and a pour point of no greater than –45°F.

MAINTENANCE: 10” relief valve assemblies should be inspected with sufficient frequency to insure to relief valve functions properly. Any
worn, damaged Or missing parts must be replaced. Gaskets should be replaced. Gaskets should be replaced if their effectiveness to insure a
liquid tight seal is impaired in any way. Replacement gaskets must be compatible with products carried.

WARNING Consult PAF406-98 maintenance manual prior to disassembly of this relief valve.
Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper
functioning of this product.

TM

INDUSTRIES, INC.
Sept 1999
WARREN, PA.

1-22
1
R

10” FILL

LIGHT WEIGHT

BETTS INDUSTRIES, INC.

SIMPLE CONSTRUCTION

WARREN, PA. U.S.A.

COVERED BY PATENTS
ISSUED AND PENDING
CT-0040
LESS MAINTENANCE

LOW SILHOUETTE

Note: Not legal for DOT Specification Cargo Tanks.

The 10” fill is fabricated for lighter weight and greater strength. Heavy gauge collar is standard along with the secondary
safety latch and a long lasting Bethane gasket.

Collar, Retainer Plate Hinge Arm, Hinge Pin,

Vent Weight Assembly No.
Shim Washer Latch, Fill Cover Washer, Cotter Pin
Steel Steel Zinc Plt. 16.5 lb. FVA8010BSM
Aluminum Steel Zinc Plt. 12.0 lb. FVA8010BAM
Stainless 304 Aluminum
Stainless 304 Stainless 304 14.0 lb. FVA8010CCM
Stainless 316 Stainless 304* 14.0 lb. FVA8010DDM
* Fill Cover Material Stainless 316

Note: Fill assemblies, as listed above, have a 6238AL vent (prefix “FVA”) and Bethane gasket (suffix “M”). For variation or
additional vents see catalog Section 95 for proper prefix or assembly number. For variation in gasketing change last letter
of suffix as follows.

Suffix “M” indicates Bethane gasket

Suffix “V” indicates Viton gasket
Suffix “W” indicates White Hypalon gasket
Suffix “A” indicates non-asbestos gasket
Suffix “T” indicates Teflon gasket w/ White Hypalon backer

When welding collars to tank, exercise care to insure collar remains flat and round.

TM

INDUSTRIES, INC. Sept 1998

WARREN, PA.

1-23
 1
PARTS LIST
10” FILL

No. Description Material Part No. No. Description Material Part No.
Steel 3021MS Steel 3023MS
Steel Zinc Plt. 3021ZC 4 Shim Washer Aluminum 3023AL
1 Cover Plate
Stnls 304 3021SL Stnls 316 3023SS
Stnls 316 3021SS 5 Vent Alum/Stnls 6238AL
M Bethane 3024BU 6 Gasket Buna-N 3716BN
V Viton 3024VT 7 Hinge Pin Stnls 304 3953SL
2 Fill Gasket W Wh. Hypalon 3024WH 8 Cotter Pin Stnls 304 9Q5866
A Non-Asbestos 3024NA 9 Washer Stnls 304 3031SL
T Teflon 3024TF
Steel 3213MS
Retainer-Fill Aluminum 3213AL
3
Gasket Stnls 304 3213SL
Stnls 316 3213SS

Gasket Maximum Temperature

Bethane 250°F Adjustment due to gasket wear may be necessary to insure
Viton 400°F proper sealing on the 10” fill. A shim washer item No. 4 is
White Hypalon 250°F provided for this purpose. To increase the sealing force of the
Non-Asbestos 350°F 10” fill, remove shim from location shown above and reposition
Teflon 250°F it above fill cover No. 1.

MAINTENANCE: Fill assemblies should be inspected with sufficient frequency and due regard to the products carried to
insure a liquid tight closure. Any worn, damaged or missing parts must be replaced. Gaskets should be replaced if their
effectiveness is impaired in any way. Replacement gaskets must be compatible with products carried.

WARNING Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper
functioning of this product.

TM

INDUSTRIES, INC. Sept 1996

WARREN, PA.

1-24
1

1-25
 1

1-26
1

1-27
 1

1-28
1

1-29
 1

1-30
1
3-1/2” Aluminum Vapor Valve AIR OPERATED

Sequential Interlock
O
SERVICE TEMPERATURE RATINGS ( F)
• Air Actuated Sequential Operation STANDARD VALVES
O O
-20 F to 200 F
O O
• Stainless Trim with PTFE Seals VALVES W/023 SUFFIX -80 F to 400 F

• Inward Opening NOTE: Temperature ratings are based on published

information and may vary due to actual conditions.

Bolted Model: *AV46850ALTS Threaded Model: AV46855ALTS

* Add suffix “022” for Stainless Mounting Bolts

IN
IN

OUT
OUT

Betts 3-1/2” Sequential Vapor Valves are designed for use as positive vapor recovery valves on cargo tanks
during loading and unloading. Sequential interlock design allows the vapor valve to be plumbed in series with
the emergency valve to insure the vapor valve is open before the emergency valve. Vapor valves can also be
plumbed to operate independently of the emergency valves, if desired. Internal interlock device guarantees that
all vapor valves and emergency valves will close fully when air pressure is released, regardless of their location
in the plumbing system.

Available in two configurations - bolted design mounts in 20” offset PAF manhole cover using eight 3/8-16UNC
bolts (included), while threaded design mounts in 16” offset PAF manhole. Both versions meet all requirements
for loading/unloading venting devices on MC306 and DOT406 cargo tanks and are tested and marked with a test
pressure of 36 psig in accordance with 49CFR178.345-5(f).

Inward opening action prevents loss of lading due to surge pressure during a roll-over accident. All moving parts
are internal to minimize chance of freeze-ups during cold weather. Aluminum bodies with stainless trim minimize
corrosion and PTFE seals in contact with vapors insure compatibility with a wide variety of products.
TM

INDUSTRIES, INC. April 2004

WARREN, PA.

1-31
 1
PARTS LIST
3 ½” ALUMINUM VAPOR VALVE – SEQUENTIAL INTERLOCK

Note: Threaded Valve Shown

PLUMBING INFORMATION:
Vapor valves may be plumbed
separately, in sequence with other vapor
valves, or they may be interlocked with an
air operated emergency valve so that the
vapor valve must open before the
emergency valve opens. Refer to
Engineering Bulletin 1-2001 for more
detailed instructions on suggested
plumbing arrangements.

Part No.
NO. REQ'D DESCRIPTION MATERIAL
Bolted Style Threaded Style
1 1 Retaining Ring – Cap Stainless Steel 9Q4977 9Q4977
2 1 Rubber Rain Cap EPDM 75010EP 75010EP
3 1 Air Cylinder Cap Alum./E-coat 19957ALEY 19957ALEY
4 1 Interlock Ball 316 Stainless 9Z4857 9Z4857
5 1 O-ring – Interlock Buna ** 19467BN ** 19467BN **
6 1 O-ring – Cap Buna ** 19971BN ** 19971BN **
7 1 Piston Alum./Anodized 75212AL 75212AL
8 1 Seal – Piston PTFE/SS 75119SSTF 75119SSTF
9 1 O-ring - Piston Buna ** 19931BN ** 19931BN **
10 1 Hard Anodized Stem Alum. 28117AL 28117AL
11 1 Spring 302 SS 19960SL 19960SL
12 1 Gasket Cork/Buna RGA301CB N.A.
1 O-ring – Mounting Viton N.A. 17657VT
13 1 Mounting Ring w/ Set Screws Alum. N.A. 19950AL
14 1 O-ring Seat Tef-Sil 19930TS 19930TS
15 1 O-ring Holder Alum. 28033AL 28033AL
16 1 Seal – Shaft PTFE/SS 19973SSTF 19973SSTF
17 1 Shaft Seal Retainer Alum. 19958AL 19958AL
18 1 Retaining Ring – Shaft Seal Stainless Steel 9Q4976 9Q4976
19 1 Bolts & Lock washers Steel/Zn Plt. *75002ZC N.A.

* Part number for Stainless Mounting Kit – 75002SL. ** Suffix “023” replaces Buna seals w/ Fluorosilicone
i.e. 19467BN changes to 19467FS.

WARNING: Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitute parts can
impair the proper function of this product and void all warranties.
TM
Oct 2005

1-32
1
3-1/2” Aluminum Vapor Valve AIR OPERATED

O
SERVICE TEMPERATURE RATINGS ( F)
• Air Actuated O
STANDARD VALVES -20 F to 200 F
O
O O
• Stainless Trim with PTFE Seals VAVLES W/023 SUFFIX -80 F to 400 F

• Inward Opening NOTE: Temperature ratings are based on published

information and may vary due to actual conditions.

Bolted Model: *AV46865ALTS Threaded Model: AV46864ALTS

* Add suffix “022” for Stainless Mounting Bolts

Betts 3-1/2” Vapor Valves are designed for use as positive vapor recovery valves on cargo tanks during loading
and unloading.

Available in two configurations - bolted design mounts in 20” offset PAF manhole cover using eight 3/8-16UNC
bolts (included), while threaded design mounts in 16” offset PAF manhole. Both versions meet all requirements
for loading/unloading venting devices on MC306 and DOT406 cargo tanks and are tested and marked with a test
pressure of 36 psig in accordance with 49CFR178.345-5(f).

Inward opening action prevents loss of lading due to surge pressure during a roll-over accident. All moving parts
are internal to minimize chance of freeze-ups during cold weather. Aluminum bodies with stainless trim minimize
corrosion and PTFE seals in contact with vapors insure compatibility with a wide variety of products.

TM

INDUSTRIES, INC. April 2004

WARREN, PA.

1-33
 1
PARTS LIST 3-1/2” Aluminum Vapor Valve

THREADED VALVE
AV46864ALTS SHOWN

Repair Kits
1. AV75603TS
2. AV75604TS

Kits Include the following item numbers;

# 2, 4, 9, 11 and 13. Please specify Bolted or Threaded.

Part No.
NO. REQ'D DESCRIPTION MATERIAL
Bolted Style Threaded Style
1 1 Retaining Ring – Cap Stainless 9Q4977 9Q4977
2 1 Rubber Rain Cap EPDM 75010EP 75010EP
3 1 Air Cylinder Cap Alum./E-coat 19957ALEY 19957ALEY
4 1 O-ring - Cap Buna ** 19971BN ** 19971BN **
5 1 Spring Retainer Nut Alum. 19934AL 19934AL
6 1 Spring Retainer Washer Brass 19959BR 19959BR
7 1 Hard Anodized Stem Alum. 75006AL 75006AL
8 1 Spring 302 SS 19960SL 19960SL
1 Gasket Cork/Buna RGA301CB N.A.
9
1 O-ring - Mounting Viton N.A. 17657VT
10 1 Mounting Ring w/ Set Screws Alum. N.A. 19950AL
11 1 O-ring - Seat Tef-Sil 19930TS 19930TS
12 1 O-ring Holder Alum. 28033AL 28033AL
13 1 Seal – Shaft PTFE/SS 75462SLTF 75462SLTF
14 1 Shaft Seal Retainer Alum. 19958AL 19958AL
15 1 Retaining Ring – Shaft Seal Stainless 9Q4976 9Q4976
16 1 Bolts & Lock washers Steel/Zn Plt. *75002ZC N.A.

* Part number for Stainless Mounting Kit 75002SL. ** Suffix “023” on assembly number replaces Buna seals
w/ Fluorosilicone i.e. 19467BN changes to 19467FS
WARNING Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitute parts can impair
the proper function of this product and void all warranties.
TM

INDUSTRIES, INC. April 2004

WARREN, PA.

1-34
1
4” Aluminum Vapor Valve AIR OPERATED

Sequential Interlock
• Air Actuated Sequential Operation
O
SERVICE TEMPERATURE RATINGS ( F)
O O
STANDARD VALVES -20 F to 200 F
• Stainless Trim with PTFE Seals
O O
VALVES W/023 SUFFIX - 80 F to 400 F

• Inward Opening NOTE: Temperature ratings are based on published

information and may vary due to actual conditions.

AV46836ALTS

4.00
3.80

1.80

.89

Ø6.15
Ø8.00

Betts 4” Sequential Vapor Valve is designed for use as a positive vapor recovery valve on cargo tanks during
loading and unloading. Sequential interlock design allows the vapor valve to be plumbed in series with the
emergency valve to insure the vapor valve is open before the emergency valve. Vapor valves can also be
plumbed to operate independently of the emergency valves, if desired. Internal interlock device guarantees that
all vapor valves and emergency valves will close fully when air pressure is released, regardless of their location
in the plumbing system.

Mounts to standard 4” TTMA sump flange pattern. Meets all requirements for loading/unloading venting devices
on MC306 and DOT406 cargo tanks and is tested and marked with a test pressure of 36 psig in accordance with
49CFR178.345-5(f).

Inward opening action prevents loss of lading due to surge pressure during a roll-over accident. All moving parts
are internal to minimize chance of freeze-ups during cold weather. Aluminum bodies with stainless trim minimize
corrosion and PTFE seals in contact with vapors insure compatibility with a wide variety of products.

TM

INDUSTRIES, INC. April 2004

WARREN, PA.

1-35
PARTS LIST
1
4” ALUMINUM VAPOR VALVE – SEQUENTIAL INTERLOCK

Repair Kit
AV75600TS

Kit includes the following item numbers;

# 2, 5, 6, 8, 9, 12, 14 and 18.

PLUMBING INFORMATION:
Vapor valves may be plumbed
separately, in sequence with other vapor
valves, or they may be interlocked with an
air operated emergency valve so that the
vapor valve must open before the
emergency valve opens. Refer to
Engineering Bulletin 1-2001 for more
detailed instructions on suggested
plumbing arrangements.

NO. REQ'D DESCRIPTION MATERIAL Part No.

1 1 Retaining Ring – Cap Stainless Steel 9Q4977

2 1 Rubber Rain Cap EPDM 75010EP
3 1 Air Cylinder Cap Alum./E-coat 19957ALEY
4 1 Interlock Ball 316 Stainless 9Z4857
5 1 O-ring – Interlock Buna ** 19467BN **
6 1 O-ring – Cap Buna ** 19971BN **
7 1 Piston Alum./Anodized 75212AL
8 1 Seal – Piston PTFE/SS 75434SLTF
9 1 O-ring - Piston Buna ** 19931BN **
10 1 Spring 302 SS 19960SL
11 1 Hard Anodized Stem Alum. 28117AL
12 1 O-ring – Seat Tef-Sil 19935TS
13 1 O-ring Holder Alum. 28000AL
14 1 Seal – Shaft PTFE/SS 75462SLTF
15 1 Shaft Seal Retainer Alum. 19958AL
16 1 Retaining Ring – Shaft Seal Stainless Steel 9Q4976
17 2 Retaining Ring – Access Holes Carbon Steel 9Q4934
18 2 O-ring – Access Holes Buna ** 19936BN **
19 2 Access Hole Plugs Alum./E-coat 19929ALEY
* Part number for Stainless Mounting Kit – 75002SL. ** Suffix “023” replaces Buna seals w/ Fluorosilicone
i.e. 19467BN changes to 19467FS.

WARNING: Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitute parts can
impair the proper function of this product and void all warranties.
TM
Oct 2005

1-36
1

1-37
 1

1-38
1

1-39
 1

1-40
1

1-41
 1

1-42
1

1-43
 1

1-44
1

1-45
 1

1-46
1

1-47
 1

1-48
1

1-49
 1

1-50
1

1-51
 1
F592

3" Compartment Vapor Valve for 16" Manhole

DESCRIPTION AND PART NUMBERS
18
4 19
6 3
5
7
2
8
9

15
16
1
17

10
11

12
14
13

ITEM PART NO.

NO. DESCRIPTION QTY. F592-301

1 Body 1 619717
2 Plug 1 618357
3 Circlip 1 618361
4 O-ring 1 618360
5 Screw, M8 x 20mm 1 617358
6 Piston 1 618356
7 O-ring, Piston 1 618359
8 Spring 1 618358
9 Piston Rod 1 618478
10 O-ring 1 615224
11 O-ring, Poppet, Viton® 1 618480
12 Poppet 1 618475
13 Seal Washer, M8 1 615638
14 Nut, Nylock, M8 1 423109
15 O-ring, Nitrile 1 618706
16 Ring Nut 1 618757
17 Screw, M5 x 10mm 1 618758
18 Air Exhaust Elbow (not shown) 1 825033204
19 Plug 1/4" NPT (not shown) 1 250104004
Seal Kit 1 619190

LOADING & UNLOADING THE WORLD

1-52
1 4” Surge Suppression Pressure Relief Valve
DUAL RATED MC306/DOT406

NO LIQUID LOSS AT IMPACT

ALUMINUM CONSTRUCTION

Pressure Relief Valve Setting 3.63 psig

Rated Pressure Actuated Emergency Venting:
142,203 Cu. Ft. Free Air per Hour @ 5.0 psig
181,828 Cu. Ft. Free Air per Hour @ 6.25 psig
Rated Liquid Flow Capacity 800 GPM @ 5.0 psig

Betts 4” Surge Suppression Pressure Relief Valve are designed to provide or augment the emergency venting capacity
required for either MC306 or DOT406 specification cargo tanks. Because they release no liquid during the DOT specified
pressure surge, the pressure relief valves exceed the requirements of 49 CFR 178.345-10(b)(3)(ii) which requires that
pressure relief devices withstand a specified pressure surge with no more than one liter leakage.

Model 8292ALTS mounts in a special 20” offset PAF manhole and model 8290ALTS mounts on either Betts model 6516
weld pad or a standard TTMA 4” weld flange. Both models are constructed of aluminum, stainless steel, zinc plated steel
and Tef-Sil seals.

O-Ring Holder & Mtg. Flange Stem Bolts Description Wt. Assembly No.
For Mounting on Manhole 8292ALTS
Aluminum Stainless Steel Zinc Plt. 5.25#
For Mounting on Flange 8290ALTS

Aluminum w/ Stainless Mounting Pad 2.5# 6516AL

Stainless Mounting Pad 7.5# 6516SS

TM

INDUSTRIES, INC. Oct 1995

WARREN, PA.

1-53
 1

1-54
1
PRESSURE / VACUUM NORMAL VENT

• Dual Purpose Vent

• Roll Over Protection
• Compact Design
• Interior Mount
A normal vent designed for use on MC306 & DOT406 cargo
tanks. Model 6496 has a pressure setting per 178.346-3(b)(2)
of “not less than 1 PSIG” and a vacuum setting per 178.346-
3(c)(2) “no more than 6 ounces” which allows for efficient
recovery of vapors during closed system loading and off-
loading. Unique roll over protection retains product at any BETTS
attitude of rollover. Vent is flow tested and marked.
WARREN, PA
16365 U.S.A.
NOTE: While normal vents provide limited vapor venting during
loading/unloading, it is recommended that positive vapor
valves (typically air operated) be provided when
loading/unloading with the manhole closed. If positive vapor
valves are not used, insure normal vent is functioning
properly or open manhole cover before beginning
loading/unloading. Failure to do so may result in head
reversals or other tank failure.

See Section 95 Page 1D for parts list and maintenance instructions.

Set Pressure** Flow Capacity Dimensions

Assembly Body Wt.
Description
No. Mat’l (lbs).
Pressure Vacuum Out- In- D
A B C
(psig) (psig) breathing breathing (Threads)
FVA 6238AL* Alum. 1.0 lb.
0.25 to 1,750 CF 3,350 CFH
MC306 0.8 to 1.0
0.375 @ 3 psi @ 1 psi
Normal Vent 6238SL* 303 SS 5
2.5 lb.
.72” 4.16” 2.75” 1 /8-12UN
PPV 6496AL* Alum. 1.0 lb.
0.25 to 1,200 CFH 3,350 CFH
DOT406 1.0 to 1.5
6496SL* 303 SS 0.375 @ 3 psi @ 1 psi 2.5 lb.
Normal Vent

Letter Mat’l Temp. Range

B Buna-N -40°F to +220°F
* Add letters to part number to designate seal
V Viton® -20°F to +400°F
material. See material table at right for designation.
EP EPDM (Black) -40°F to +260°F

** Proper maintenance is required to ensure effective performance of normal vent. Dust, dirt, or residue will reduce the
ability of the vent to hold required set-pressure.

TM July 2004
INDUSTRIES, INC.
WARREN, PA.

1-55
 1
Parts List
Pressure/Vacuum Normal Vent

No. Req. Description Material Part No.

Aluminum 7516AL001
1 1 Vent Body
303 SS 7533SL
#8-32 Truss Hd. Mach.
2 1 304 SS 9Q8216
Screw
Pressure Disc Retainer
3 1 Nylon 3645NY
Washer
Buna-N 3644BN
4 1 Pressure Seal Disc Viton® 3644VT
EPDM 3644EP
5 1 Roll-Over Guide Block 303 SS 3640SL
Pressure Relief Spring 302 SS
3812SL
for 6496 (DOT406) Coated Black
6 1
Pressure Relief Spring 302 SS
3725SL
for 6238 (MC306) Coated Blue
Spring Collar
7 1 304 SS 3643SL
Assembly
8 1 Vacuum Relief Spring 302 SS 3653SL
Aluminum 3649AL
9 1 Retainer Plate
316 SS 3649SS
Steel Zc. Plt. 9Q8206
Inspection & Maintenance 10 1 Retaining Ring
Stainless 9Q8207
Vacuum Disc Retainer Aluminum 3647AL
Per TTMA Technical Bulletin No. 92 “Inspect 11 1
pressure relief valves and normal pressure/vacuum Washer 316 SS 3647SS
valves with sufficient frequency, but no less than once Buna-N 3646BN
a month, to insure they are operational. Corroded parts 12 1 Vacuum Seal Disc Viton® 3646BN
must be replaced. Valves that are filled with residue EPDM 3646EP
must be cleaned. If venting devices are not operational,
13 1 Vacuum Spacer Washer Nylon 3675NY
do not operate the cargo tank until the venting devices
are repaired or replaced. Failure to follow this Vacuum Disc Support & Aluminum 3969AL
procedure can result in liquid or vapor leakage and tank Rating Plate For 6496
damage.” (DOT406) 316 SS 3969SS
14 1
Vacuum Disc Support & Aluminum 3648AL
To inspect vent, remove from tank and check for
Rating Plate For 6238
obstructions in the exit port and pressure inlets. Shake 316 SS 3648SS
(MC306)
vent to ensure roll-over guide block (#5) slides freely up
and down. The vacuum disc (#14) is spring-loaded and Hex. Nut with Nylon Steel Zc. Plt. 9Q8220
16 1
1
should open approximately /8” to expose vacuum seat insert #8-32 Thd. 304 SS 9Q9348
when the hex nut (#16) is gripped with a pair of pliers Buna-N 17211BN
and pulled directly down. 18 1 Mounting O-Ring Viton® 17211VT
EPDM 17211EP

}
Dirt and residue can be cleaned from the vent by
soaking in mild detergent, rinsing with clean water,
3795RK* - Repair kit for 6238AL* Kits include item #’s
and blowing out with compressed air.
4141RK* - Repair kit for 6496AL* 2,3,4,6,8,12,13,14,16,&18
For more detailed instructions refer to the most
recent version of Engineering Bulletin 1-99 * Add letters to part number to designate seal material. See table in
Section 95 Page 1C.

WARNING: Use only Betts Industries, Inc replacement components. Use of substitute parts can impair the proper
function of this product and void all warranties.

TM July 2004
INDUSTRIES, INC.
WARREN, PA.

1-56
1

1-57
 1

1-58
1

1-59
 1

1-60
1

1-61
 1

1-62
1

1-63
 1

1-64
1

1-65
 1
 

Use with Betts Push Type or Air Operated Vapor Valves

The Betts emission collection hood provides an economical means of connecting the positive vapor vent to the vapor
rail. The hoods are made of ozone and ultraviolet resistant nitrile and are designed to collapse in case of rollover
without adversely affecting the product retention of the cargo tank. The hoods for the 5” valve are provided with two
outlets and one of them is plugged with an aluminum end cap. Hoods are available less the mounting clamp with
suffix “001” added to the end of the assembly number.

Hoods for 5” Valve

VR45725BU – Vapor hood with provisions for two VR45742BU – Vapor hood with provisions for two
outlets 180° apart. Weight 3.7 lbs. outlets on same side. Weight 3.7 lbs.

Hood for 3½˝ Threaded Style Hood for 3½˝ Bolted Style Optional 30° Screened Outlet
VR45962BU – Weight 1.0 lbs. VR45784BU – Weight 2.3 lbs Add suffix “003” to end of assembly
number.

TM

June 2009

1-66
1
F270

Vapor Recovery Hood ( Obsolete Item )

VAPOR RECOVERY
FEATURES AND BENEFITS
• Used with F265 vents to convert mechanical

HOOD
vent to vapor recovery.
• Two 3" outlets, 90° apart for flexibility of connection
to vapor header or roll-over rail.
• Collapsible hood.

VARIANTS OVERALL DIMENSIONS

PART NO. DESCRIPTION WEIGHT 10.50"

(266.70mm)
F270-901 Vapor Hood - 5" 3.25 lbs.

5.50"
(139.70mm)

3.50"
(88.9mm)

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350
1-67
 1
F270

Vapor Recovery Hood ( Obsolete Item )

DESCRIPTION AND PART NUMBERS

6 1
7

3
6

PART NO.
ITEM F270-901
NO. DESCRIPTION QTY. 5" MATERIAL

1 Vapor Recovery Hood 1 408479 Buna

2 Hex Head Screws 8 405766 Steel
3 Adapter 1 561446 Aluminum
4 Band 1 408949 Stainless Steel
4 Clamp 1 451678 Stainless Steel
5 Gasket 2 443543 Corprene
6 Clamps 2 408480 Stainless Steel
7 Plug 1 408481 Aluminum

LOADING & UNLOADING THE WORLD

1-68
1

1-69
 1

1-70
1

1-71
 1

1-72
1

1-73
 1

1-74
1

1-75
 1

1-76
1

1-77
 1

1-78
1

1-79
 1

F552

API Adapter "Y" Valve

FEATURES AND BENEFITS

API ADAPTER
Specifically designed for high speed unloading.

• Highest flow rate in the industry.

• Designed and built in accordance with
API RP-1004.
• Product loading accomplished via API head.
Product unloading accomplished via bottom
faucet configuration.
• Two piece all aluminum body. API head hard
coat anodized to reduce wear and corrosion.
• Faucet disc moves out of product flow,
providing unrestricted unloading.
• 4" TTMA piping connection and faucet outlet.
• Faucet outlet hose connector (F557) and
mounting lugs for installation of brake
interlock valve: F537 or F527, refer to air
interlock section.
• Handle is ductile iron with baked on
coating to eliminate corrosion.
• Standard: Dust cap F499.

VARIANTS 13.24"
(336.30mm)
PART NO. DESCRIPTION WEIGHT

F552-023 Viton® with Dust Cap 23.50 lbs.

Optional: 11.25"
(285.75mm)
F557-012 Flange, 3" Cam & Groove x 4" TTMA 2.38 lbs.
F557-013 Flange, 4" Cam & Groove x 4" TTMA 2.38 lbs.

8.84"
(224.54mm)
12.44"
(315.98mm)

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350
1-80
1
F552

API Adapter "Y" Valve

13
23 22
11 12
10
25 4 5 6 9
24
2 8
7

3 14

15 36 35

1 34
26 31
27
28 29 16
33
30 32
17 18

21
19

20

SPECIFICATIONS
ITEM PART NO. ITEM PART NO.
NO. DESCRIPTION QTY. F552-023 MATERIAL NO. DESCRIPTION QTY. F552-023 MATERIAL
1 Lifter Spring 1 405378 Stainless Steel 19 Adapter 1 407984 Aluminum
2 Lifter Assembly 1 491438 - 20 API Dust Cap Assembly 1 F499-121 -
Screw 6 405387 - 21 Screws 7 444552 Stainless Steel
Washer 6 408594 - 22 Washer 1 409553 -
3 Body 1 491900 Aluminum 23 Nut 1 564277 -
4 Hex Nut 1 406234 Stainless Steel 24 Lifter 405372 -
5 Lockwasher 1 405767 - 25 Roll Pin 1 405392 -
6 Screw 1 408032 Stainless Steel 26 Basket 1 405374 Aluminum
7 Sleeve 1 405398 Nylatron 27 Disc 1 405101 Viton®
8 Lifter Stem 1 405377 Steel Disc 1 405100 Buna
9 Roll Pin 1 577759 Stainless Steel 28 Disc Retainer 1 405376 Nylon
10 Bolt 1 564278 Stainless Steel 29 Bushing 1 408026 -
11 Drive Bushing 1 405379 Steel 30* Stem 1 563165 -
12 O-ring 2 408054 Viton® 31* Roll Pin 1 408635 -
13 Stuffing Box 1 408627 Aluminum 32* O-ring 1 408061 Viton®
14 Lever Assembly 1 F616-005 Iron 32* O-ring 1 408931 Buna
14 Lever 1 408116 - 33* Poppet Disc 1 408028 -
15 Stud 1 405383 Stainless Steel 34 Socket 1 409061 -
16 Poppet Assembly 1 492846 Viton® 35 Screw 1 577652 -
17 Spring 1 563166 Steel 36 Nut 1 564277 -
18 O-ring 1 409638 Viton® Mounting Kit 1 451117

*Included in poppet assembly when ordered as item 16

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-81
 1
F5001

API Adapter, Openable

FEATURES AND BENEFITS

API ADAPTER
API adapter with a one piece body, hard anodized replaceable nose ring and flat bottom.

• All running surfaces are bushed for smooth

operation and extended life.
• Hard anodized replaceable nose ring that can
be indexed through four positions for extended life.
• Nose ring can be rotated without draining the line.
• Flat bottom of valve body ensures complete
product drainage and minimizes contamination.
• Two stage fixed aluminum lever gives positive
indication of valve position.
• Conforms to API RP1004 for total compatibility
with API couplers.
• Lightweight die cast aluminum construction for
increased payloads with strength.
• Viton® seals are standard for compatibility with
high octane fuels and additives.
• Hydrodynamic design minimizes pressure drop
for high flow rates.
• Stainless steel internal components.
• Top mounting for hose interlock.
• Mounting flange meets 4" TTMA specification.

8.7"

VARIANTS
(220mm)

PART NO. DESCRIPTION SEAL WEIGHT

F5001-001 4" Adapter, Aluminum Viton® 9.7 lbs.

3.6"
F5001-002 4" Adapter, Aluminum PTFE 9.7 lbs. (92mm)

7.0"
(178mm)

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-82
1
F5001

API Adapter, Openable

DESCRIPTION AND PART NUMBERS 6 7 8 9
1 2 3 4 5

10

11

12

26 24 23 13
25
22 21 20 19 18 16 17 16 15 27 14
SPECIFICATIONS
REF DESCRIPTION PART NO. PART NO. QTY
F5001-001 F5001-002
VITON PTFE
1 Nose Ring 619323 619323 1
2 Body 619350 619350 1
3 O-Ring 850027 619410 1
4 Poppet 619348 619348 1
5 Bearing Roller 409436 409436 1
6 Cam 619312 619312 1
7 Hair Pin Clip 560489 560489 2
8 Deflector Cone 619308 619308 1
9 Stem 619309 619309 1
10 Compression Spring 619454 619454 1
11 Roll Pin 619311 619311 1
12 Bearing Pin 563161 563161 1
13 Nut 564277 564277 1
14 Lever 619314 619314 1
15 Screw 564278 564278 1
16 Washer Nylon 564275 564275 2
17 Spring 564273 564273 1
18 O-Ring 561320 561320 1
19 Retaining Ring 408169 408169 1
20 Spacer 408167 408167 1
21 O-Ring 407433 577191 1
22 Roll Pin 561852 561852 2
23 Shaft 619316 619316 1
24 Bearing 409443 409443 1
25 Stud 619313 619313 1
26 Screw M5 C’sk 619370 619370 2
SERVICE KITS
PART NO. DESCRIPTION
619504 Service Kit
619506 Nose Ring Kit
619636 Lever Kit
619927 Poppet Seal Kit printed on recycled paper
670085 Lever & Shaft Kit

LOADING AND UNLOADING THE WORLD

1-83
 1

F5002

API Adapter, Openable with Liquid Indicator

FEATURES AND BENEFITS

API ADAPTERS
API adapter with a one piece body, hard anodized replaceable nose ring and flat bottom.

• All running surfaces are bushed for smoother

operation and extended life.
• Hard anodized replaceable nose ring that can
be indexed through four positions for extended life.
• Flat bottom of valve body ensures complete
product drainage and minimizes contamination.
• Product sight glass fitted at lowest point of valve
for visual check of product in pipework.
• Two stage fixed aluminum lever gives positive
indication of valve position.
• Conforms to API RP1004 for total compatibility
with API couplers.
• Light weight die cast aluminum construction for
increased payloads with strength.
• Viton® seals are standard for compatibility with
high octane fuels and additives.
• Hydrodynamic design minimizes pressure drop
for high flow rates.
• Stainless steel internal components.
• Top mounting for hose interlock.
• Dryline ready for proposed future regulation.

8.7"

VARIANTS (220mm)

PART NO. DESCRIPTION SEAL WEIGHT

F5002-041 4" Adapter, Aluminum Viton® 9.8 lbs.

F5002-041 4" Adapter, Aluminum PTFE 9.8 lbs. 3.6"
(92mm)

7.0"
(178mm)

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-84
1
F5002

API Adapter, Openable with Liquid Indicator

DESCRIPTION AND PART NUMBERS

1 2 3 4 5 6 10 11 12 13
7 8 9

14

15

16

17
30 29 28 27 26 25 24 23 22 20 21 20 19 18

SPECIFICATIONS
REF DESCRIPTION PART NO. PART NO. QTY REF DESCRIPTION PART NO. PART NO. QTY
F5002-001 F5002-002 F5002-001 F5002-002
VITON PTFE VITON PTFE

1 Nose Ring 619323 619323 1 21 Spring 564273 564273 1

2 Screw 602747 602747 4 22 O-Ring 561320 561320 1
3 Sight Glass 618148 618148 1 23 Retaining Ring 408169 408169 1
4 O-Ring 577105 577253 1 24 Spacer 408167 408167 1
5 Hollow Ball 603602 603602 1 25 O-Ring 407433 577191 1
6 Body 619349 619349 1 26 Roll Pin 561852 561852 2
7 O-Ring 850027 619410 1 27 Shaft 619316 619316 1
8 Poppet 619327 619327 1 28 Bearing 409443 409443 1
9 Bearing Roller 409436 409436 1 29 Stud 619313 619313 1
10 Cam 619328 619328 1 30 Screw M5 C’sk 619370 619370 2
11 Hair Pin Clip 560489 560489 2 N/S Washer M6 616399 616399 4
12 Deflector Cone 619308 619308 1
13 Stem 619309 619309 1
14 Spring 619454 619454 1 SERVICE KITS
15 Roll Pin 619311 619311 1 PART NO. DESCRIPTION
16 Bearing Pin 563161 563161 1 619499 Sight Glass Kit
17 Nut 564277 564277 1 619504 Service Kit
18 Lever 619314 619314 1 619506 Nose Ring Kit
19 Screw 564278 564278 1 619636 Lever Kit
20 Washer Nylon 564275 564275 2 619927 Poppet Seal Kit
670085 Lever & Shaft Kit
Note:
This Parts Breakdown does not cover the F5002-041 Series of API Adaptor.

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-85
 1

F5000

API Adapter
FEATURES AND BENEFITS

API ADAPTER
API adapter with a one piece body, hard anodized replaceable nose ring and flat bottom.

• All running surfaces are bushed for smooth

operation and extended life.
• Hard anodized replaceable nose ring that can be
indexed through four positions for extended life.
• Nose ring can be rotated without draining the line.
• Flat bottom of valve body ensures complete
product drainage and minimizes contamination.
• Conforms to API RP1004 for total compatibility
with API couplers.
• Lightweight die cast aluminum construction for
increased payloads with strength.
• Viton® seals are standard for compatibility with
high octane fuels and additives.
• Hydrodynamic design minimizes pressure drop
for high flow rates.
• Stainless steel internal components.
• Top mounting for hose interlock.
• Mounting flange meets 4" TTMA specification.

VARIANTS
PART NO. DESCRIPTION SEAL WEIGHT

F5000-001 4" Adapter, Aluminum Viton® 7.8 lbs.

F5000-002 4" Adapter, Aluminum PTFE 7.8 lbs.

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-86
1
F5000

API Adapter

DESCRIPTION AND PART NUMBERS

1 2 3 4 5 6 7 8

10 9

SPECIFICATIONS
REF DESCRIPTION PART NO. PART NO. QTY
F5000-001 F5000-002
VITON PTFE
1 Nose Ring 619323 619323 1
2 Body 619351 619351 1
3 O-Ring 850027 619410 1
4 Poppet 619348 619348 1
5 Spring 619454 619454 1
6 Hair Pin Clip 560489 560489 2
7 Cone 619308 619308 1
8 Stem 619309 619309 1
9 Roll Pin 619311 619311 1
10 Screw M5 C’sk 619370 619370 2

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-87
 1

1-88
1

1-89
 1
Petroleum Products
Bayco Petroleum Products 4" API Valves
API Valves are used for bottom loading and unloading of petroleum tankers. Valve nose shape and opening comply with American
Petroleum Institute standard (API RP-1004) enabling Dixon’s API valves to interchange with competitor items made to the same
specification. Two styles are available: a load model without handle and, a load/unload model with a handle to allow manual
opening.
• unique flow and fluid level sight indicator are available
• load/unload versions feature an ergonomically curved handle that opens with a short 62° stroke, can be ordered with a
fixed or removable handle
• chemical resistant crank seals and poppet seal (Teflon® seals optional)
• any required maintenance is simplified, can be completely rebuilt without removing the valve from the tank
• the ALH (anodized aluminum hard coat) nose ring can be rotated to provide a fresh cam service
• see page 7 for tank truck flange gaskets
• aluminum ergonomic handle
• 5204NG approved for use in the following service: gasoline, diesel, E10 10% ethanol, E85 85% ethanol, E100 100% ethanol,
B15 15% bio-diesel/diesel, B20 20% bio-diesel/diesel
• 5204NG tested performance to -40°F/C with 100% ethanol, B15 15% bio-diesel and B20 20% bio-diesel
FloTech Overfill Products

• 5204NGV approved for use in the following service: B100 100% bio-diesel
API Load/Unload Valve
Part # Description
5204NG fixed handle, without sight glass, ALH nose ring,
Baylast™ seal
5204 fixed handle, sight glass, ALH nose ring, Baylast™
seal
5204C removable handle 1, sight glass, ALH nose ring,
Baylast™ seal
5204
5204NGC removable handle 1, without sight glass, ALH nose
ring, Baylast™ seal
5204SNG fixed handle, without sight glass, ALH nose ring,
stainless steel spring for crude oil, Baylast™ seal
5204TNG fixed handle, without sight glass, ALH nose ring,
Teflon® seals
5204NGV fixed handle, without sight glass, Viton® seals
5204SFI fixed handle, with inline full body sight glass, ALH
nose ring, Baylast™ seal
5204SFI
Replacement Parts

1
removable handle for Canadian market
API Load Only Valve
Part # Description
5204L load only API valve with sight glass, ALH nose ring
5204LNG load only API valve without sight glass, ALH nose
ring
* Note: Please reference pages 56 and 57 for repair kits and
5204L replacement parts.

API Dust Caps

Part # Description
5000-25 41450-DCAL aluminum API cap with flat gasket
5000-25 nylon API cap with flat gasket, pad lockable arm
5205 aluminum API cap with quick release arm and
chain
5000-24 aluminum API cap with O-ring seal
Index

5205
* Note: Please reference pages 58 for repair kits and
replacement parts.

Dixon Bayco 2010

1-90
1

Bayco Petroleum Products

Replacement Parts

5204 Series, API Bottom Load Valves

Bill of Materials Quantity of Components per Unit

Description Part# 5204 5204NG 5204TNG 5204SNG 5204NGV 5204C 5204NGC 5204L 5204LNG
1 body - pipe end --- 1 1 1 1 1 1 1 1 1
2 nose ring use kit 5204K3 1 1 1 1 1 1 1 1 1
3 shaft 390812 1 1 1 1 1 1 1 N/A N/A
4 handle pin 111559 1 1 1 1 1 N/A N/A N/A N/A
5 shaft spacer 390813 1 1 1 1 1 1 1 N/A N/A
6 shaft bearing 111557 1 1 1 1 1 1 1 N/A N/A
7 stop pin 5204-SP 1 1 1 1 1 1 1 N/A N/A
8A fixed handle use kit 5204K7 1 1 1 1 1 N/A N/A N/A N/A
8B removeable handle use kit 5204K5 N/A N/A N/A N/A N/A 1 1 N/A N/A
9A poppet (Load/Unload versions) 341755 1 1 1 1 1 1 1 N/A N/A
9B poppet (Load only versions) 341756 N/A N/A N/A N/A N/A N/A N/A 1 1
10 poppet bearing 111558 1 1 1 1 1 1 1 1 1

FloTech Overfill Products

11 cam 111550 1 1 1 1 1 1 1 N/A N/A
12 sight glass use kit 5204K8 1 N/A N/A N/A N/A 1 N/A 1 N/A
13 poppet roller 390815 1 1 1 1 1 1 1 N/A N/A
14 poppet roller bearing 111556 1 1 1 1 1 1 1 N/A N/A
15 retaining ring 111560 1 1 1 1 1 1 1 1 1
16A Baylast™ poppet O-ring 5204K1 1 1 N/A 1 N/A 1 1 1 1
16B Viton® poppet O-ring 5204KV1 N/A N/A N/A N/A 1 N/A N/A N/A N/A
16C Teflon® encapsulated poppet O-ring use kit 5204K6 N/A N/A 1 N/A N/A N/A N/A N/A N/A
17A nose ring O-ring 111554 1 1 N/A 1 1 1 1 1 1
17B Teflon® nose O-ring use kit 5204K6 N/A N/A 1 N/A N/A N/A N/A N/A N/A
18A shaft O-ring 111552 1 1 N/A 1 1 1 1 N/A N/A
18B Teflon® shaft O-ring use kit 5204K6 N/A N/A 1 N/A N/A N/A N/A N/A N/A
19 shaft and cam roll pin 6000-12 2 2 2 2 2 2 2 N/A N/A
20 pin roller 111566 1 1 1 1 1 1 1 N/A N/A
21 grease fitting 111561 1 1 1 1 1 1 1 N/A N/A
23 sight glass screw use kit 5204K12 6 N/A N/A N/A N/A 6 N/A 6 N/A
24 nose ring screw use kit 5204K11 8 8 8 8 8 8 8 8 8
25A Baylast™ sight glass O-ring use kit 5204K8 1 N/A N/A N/A N/A 1 N/A 1 N/A
25B Teflon® sight glass O-ring use kit 5204K6 N/A N/A N/A N/A N/A N/A N/A N/A N/A

Petroleum Replacement Parts

26 washer 111562 5 1 1 1 1 4 N/A 4 N/A
27 cotter pin 111563 1 1 1 1 1 N/A N/A N/A N/A
28A main spring-steel 111564 1 1 N/A N/A 1 1 1 1 1
28B main spring- stainless steel 111542 N/A N/A 1 1 N/A N/A N/A N/A N/A
29 handle spring 111565 1 1 1 1 1 1 1 N/A N/A
30 dust seal O-ring 111553 1 1 1 1 1 1 1 N/A N/A
31 lock washer 1/4” 111569 14 8 8 8 8 14 8 14 8
32 handle shaft spring washer 111573 1 1 1 1 1 1 1 N/A N/A
33 handle shaft washer 111574 1 1 1 1 1 1 1 N/A N/A
34 back-up ring 111579 1 1 1 1 1 1 1 N/A N/A
35 u-cup seal 111580 1 1 1 1 1 1 1 N/A N/A
36 flow indicator use kit 5204K8 1 N/A N/A N/A N/A 1 N/A N/A N/A
37 float ball use kit 5204K8 1 N/A N/A N/A N/A 1 N/A 1 N/A
38 * retaining ring use kit 5204K13 N/A N/A N/A N/A N/A N/A N/A N/A N/A
39 * SFI sight glass use kit 5204K13 N/A N/A N/A N/A N/A N/A N/A N/A N/A
40 * SFI sight glass O-ring (Baylast™) use kit 5204K13 N/A N/A N/A N/A N/A N/A N/A N/A N/A

* not illustrated, parts for 5204-SFI

N/A = Not Applicable
Index

Dixon Bayco 2010

1-91
 1

Product Identification Markers

4 & 8 SIDED
Individual Decals available for both Roto Tags

Roto Tag 4 • Pre-Assembled

• Four Basic Product Labels furnished
as Indicated
• API Colors and Symbols
• Unit made of black, durable glass and
polypropoline
• L 61/4" - W 21/4" - H 21/2"
• Special tags made from Polyetholene
can also be used to tag location fills
• Label Lettering 1/4"

• All alluminum construction

Roto Tag 8 •
•
Spring loaded positive lock
Weatherproof vinyl decals
• Comes standard with the following decals:

Premium Unleaded
Unleaded Plus
Regular Unleaded
Diesel
Kerosene
Diesel High Sulphur
Diesel Low Sulphur
Empty or Vapor

1-92
1

1-93
 1

,QWURGXFLQJ7KH 1(:-LNRK

2SWL/LWH 70

,OOXPLQDWHG6LJKW*ODVV

7KHVWRU\RIWKH1HZ-LNRK2SWL/LWH
,OOXPLQDWHG6LJKW*ODVV

3HRSOHFDPHWRXVDQGDVNHG
:KDWDERXWVHHLQJDWQLJKW"

'ULYHUVDUHRXWDQGDWQLJKW
WKH\FDQQRWVHHLQWRWKHVLJKWJODVV
ZLWKRXWFDUU\LQJLOOXPLQDWLRQ

:HZHQWWRZRUNWRSURYLGHDQHZ
5HYROXWLRQDU\,OOXPLQDWHG6LJKW
*ODVVWKDWZRXOGOLJKWWKHZD\

,WQHHGHGWREHVXSHUEULJKWVRZH
PDGHLWWKDWZD\

,WQHHGHGWRODVWIRU\HDUVVRZH
LQVWDOOHGORQJODVWLQJ/('OLJKWV

,QWRGD\
VPDUNHWLWKDGWREH
(WKDQRO&RPSDWLEOHVRRIFRXUVH
LWLV

7KHUHLVPXFKPRUHZHFRXOGVD\
VHQGXVDQHPDLORUFDOOXVWRGD\

3DUW-'*/(3(WKDQROJODVV/('Z
OHDGZLUH
1-94
1

H32094PA
1004D3/1005E3 API Bottom Loading Coupler July 2009

The 1004D3 is the standard in “drip-less”

bottom loading couplers and a proven
performer at major oil terminals
worldwide. The 1004D3 mates with all 4”
bottom loading adaptors built in
accordance with API RP-1004
requirements to significantly reduce liquid
loss at disconnect.
1005E3 1004D3
Small handles used Large handles used
Throughout Europe Throughout the Americas
BENEFITS
5 Cam Design Redundant Sealing
Design insures easy alignment, tight connection and Simple and reliable, consisting of dual heavy duty
resists side forces during loading. cross-section o-rings.

Fully Interlocked Smoother, Easier Operation

The 1004D3 cannot be opened unless it is properly Built-In roller bearing handle and Teflon impregnated
connected to an API adaptor nor can it be disconnected poppet and cylinder provide for smoother, easier
when the poppet is open. movement.
Easy and inexpensive to maintain!

SELECTION GUIDE 1004D3 04 01

1004D3 = Large handles, U.S. version. 04 = Size 01 = Seal

1005E3 = Small handles, European version. (4” only) 01 - Buna
02 - Fluorocarbon
04 - EPT

Design Parameters: Materials:

Max Design Pressure: 125 psi (g), 8.6 bar(g) Body, Sleeve, Poppet Aluminum (A356-T6)

Max Allowable Working Pressure: 75psi (g), 5 bar (g) Cam , Interlock 316 SST ASTM A351 CF8M

Max Flow Rate: 600GPM, 135 M3/H Cylinder Aluminum (6061-T6)

Max Temperature: See seal options (page 3) Shaft 13-8 Condition RH 950 Stainless Steel.

Weight: 18.5lbs (8.39 kg) Seals See Seal Options

Pressure Drop (At Max Flow Rate) 2-5 psi (g), .24 bar (g) Clevis Pin 17-4 PH SST condition H900 Hardened.

*Unit tested to 300 psi (21 bar) in the closed position to withstand excessive thermal expansion. Reference API
Standard RP-1004 for additional information.

© Copyright 2009, OPW Engineered Systems

1-95
 1
API B ottom L o a d i n g C o u p l e r 1004D3/1005E3

# Description Qty Material Part #

1 Body 1 Aluminum A356-T6, ASTM B26 Anodized. E20064AH
2 Spirol Pin 7 Carbon Steel Zinc Plated. H31396M
3 Interlock Spring 2 Carbon Steel Zinc Plated. H31743M
4 Interlock 2 316 SST, ASTM A351 CF-8M. C20062M
5 Cam Spring 5 18-8 SST. H06753M
6 Cam 5 316 SST, ASTM A351 CF-8M. C20063M
7 Wave Spring 1 17-7 PH SST, Condition H900 Hardened. H31091M
8 Cylinder 1 Aluminum 6061-T6. C21283AH
9 Cylinder O-Ring 1 See Seal Options Chart. - *
10 Nose Seal 1 See seal Options Chart. - *
11 Poppet 1 Aluminum A356-T6, ASTM B26, Anodized. D20069AH
12 High Pressure Link 2 410 SST Hardened. H30552M
13 Clevis Pin 2 17-4 PH SST, Condition H900 Hardened. H30610RE
14 Washer 2 18-8 SST. H30206M
15 E - Ring 2 SST H30554M
16 Drive Link 1 316 SST, ASTM A351 CF-8M. C21255EW
E20013AH (1004D3)
17 Sleeve 1 Aluminum A356-T6 ASTM B26 Anodized.
E20026AH (1005E3)
18 Dust Seal 1 Felt H30214M
19 Tube Spacer 1 316 SST. C21254RE
20 Handle Shaft 1 13-8 Condition RH 950 Stainless Steel. C21290RE
21 Stuff Box 1 316L ASTM A479 316. C20812RE
22 Stuff Box O-Ring 2 See Seal Options Chart. - *
23 Stuff Box O-Ring 1 See Seal Options Chart. - *
24 Sleeve Bearing 1 97180 H32163M *
25 Operating Handle 1 316 SST, ASTM A351 CF-8M. E20070EW
26 Cam Follower 1 17-4 PH SST, Condition H900 Hardened. H32029RE
27 Loctite As required Thread Locking Compound. TYPE 242
28 3/8-24 Hex Nut 1 Carbon Steel Zinc Plated. H30220M
29 Belleville Disc Spring 1 300 Series Stainless Steel H32158M
30 Nut, Hex, SST, M10-1.5 1 SST H32111M
31 ID Tag 1 0.12 Satin. -
32 6-20 X 3/16” Thread Screw 4 Type B, Steel, Zinc plated H32149M
* Items included in seal replacement kits (1004D3SRK)

© Copyright 2009, OPW Engineered Systems

1-96
1
API B ottom L o a d i n g C o u p l e r 1004D3/1005E3

IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local
laws and regulations. Product selection should be based on physical specifications and limitations and
compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product
information available at the time of publication. OPW reserves the right to make changes at any time in prices,
materials, specifications and models and to discontinue models without notice or obligation.

SEAL OPTIONS
Seal Nose Stuff Box Stuff Box Seal Cylinder
Coupler Model # Temp Rating
Material Seal (10) Seal (22) (23) Seal(9)
1004D3- -20°F - 250°F
Buna N 1500 H30482M H20129M H31705M H30258M
0401/1005E3-0401 (-29°C - 121° C)
1004D3- -20°F - 400°F
Fluorocarbon H30483M H20175M H31706M H30217M
0402/1005E3-0402 (-29°C - 204° C)
1004D3- -50°F - 225°F
EPT E 692 H31957M H20176M H31707M H31956M
0404/1005E3-0404 (-46°C - 107° C)
Consult factory for additional seal options.

SEAL REPLACEMENT
KITS
Seal Material Seal Replacement Kit Part #
OPW 1004D3SRK Seal Replacement Kits
include everything needed to change the Buna N 1500 1004D3SRK-0401
seals in the 1004D3/1005E3 API coupler. Fluorocarbon 1004D3SRK-0402
Seal Replacement Kits are always
recommended as spare parts. EPT E 692 1004D3SRK-0404

Tools Needed
• 11/16 inch or 17mm socket • 1-1/4 inch or 32mm deep reach socket.

ASSEMBLY
API coupler Installation Preparations
Safety precautions
Warning: Read & Understand these instructions before starting installation.
• Coupler to be used for its designated purpose only.
• Local regulations for (un)loading must be followed at all times.
• Product flow may result in static electricity; grounding of equipment is required.
• Although the 1004D3/1005E3 designed for higher pressures, proper measures must be taken within the
system to allow for thermal expansion.
• OPW instructions must be followed for installation.
Make sure to use adequate personal protection at all times during operation.
Note: All images depict the 1004D3 (large handles). The steps for 1005E3 coupler (small handles) are the
same as 1004D3
Step 1 Step 2
• Secure whatever • Align coupler bolt holes with
device coupler will bolt holes on loading device.
be mounted to the • Insert two bolts into the
e.g. loading arm. highest bolt holes on the
• Sandwich gasket flange and hand tighten. This
between coupler is to secure coupler, and
and load device prevent damage due to
flanges. bending as the remaining
bolts are installed.

Warning: Under pressure, poppet will cause handle to rotate violently if not restrained.
© Copyright 2009, OPW Engineered Systems

1-97
 PART #H32183PA 1
February 2009

1004D2/1005E API Bottom Loading Coupler

The 1004D2 is the standard in

“drip-less” bottom loading couplers
and a proven performer at major oil
terminals worldwide. The 1004D2
mates with all 4” bottom loading
adaptors and is built in accordance
with API RP-1004 requirements to
significantly reduce liquid loss
at disconnect.

1005E 1004D2
Small handles used Large handles used
BENEFITS throughout Europe throughout the Americas

5 Cam Design Smoother, Easier Operation

Design insures easy alignment, tight Built-in roller bearing handle and PTFE impregnated
connection and resists side forces during loading. poppet and cylinder provide for smoother, easier
Fully Interlocked movement.
The 1004D2 cannot be opened unless it is properly Easy and inexpensive to maintain!
connected to an API adaptor nor can it be disconnected
when the poppet is open.
Redundant Sealing
Simple and reliable, consisting of dual heavy-duty
cross-section O-rings.

SELECTION GUIDE
1004D2 04 02
02= Seal
1004D2 = Large handles, U.S. version 04 = size 01 - Buna-N
1005E = Small handle, European version (4” only)
02 - Fluorocarbon GFLT
04 - EPDM
DESIGN PARAMETERS: MATERIALS:

*Max Allowable Working Pressure: 75 psi (g), 5 bar (g) Body, Sleeve, Poppet Aluminum (A356-T6)

Max Flow Rate: 600 GPM, 135 M3/H Cam Arms, Interlock, Drive Link Stainless Steel (ASTM A351 CF8M)

Max Temperature: See seal options (page 3) Cylinder Aluminum (6061-T6)

Weight: 18.5 lbs (8.39 kg) Shaft Stainless Steel (17-4 PH)

Pressure Drop (At Max Flow Rate) 2-5 psi (g), .24 bar (g) Seals See Seal Options
*Unit tested to 300 psi (21 bar) in the closed position to withstand excessive thermal expansion. Reference API Standard RP-1004 for additional information.
© Copyright 2009, OPW Engineered Systems

1-98
1 API Bottom Loading Coupler 1004D2 /1005E MAINTENANCE

MAIN AND BACK-UP SEALS

# Description Qty Material Part #
1 Screw 3 Carbon Steel H30222M
2 Nose seal 1 See Seal Option Chart See Seal Options *
3 Locking Cam Arm 5 316 SST ASTM A351 CF-8M C20063M
4 Poppet 1 Aluminum A356-T6 ASTM B26 Anodized D20069AH
5 Wave Spring 1 17-7 PH Stainless Steel H31091M
6 Cylinder 1 6061-T6 Aluminum Anodized C20144RAH
7 Interlock 1 316 SST ASTM A351 CF-8M C20062M
8 Shaft Dust Seal 1 Felt H30228M *
9 Shaft 1 17-4 PH SST Condition H1025 Hardened C20145RE
10 Nut, Hex 1 Carbon Steel, Zinc plated H30220M
11 Roller Bearing 1 Carbon Steel H30219M
12 Lever 1 Aluminum A356-T6 ASTM B26 D20037A
13 Spiral Pin 7 Carbon Steel Zinc plated H31396M
14 a, b Shaft O-Ring 2 See Seal Option Chart See Seal Options *
15 Bushing 1 Brass UNS C-36000 H30809RB
16 Groove Pin 1 Carbon Steel Zinc plated H30212M *
17 a, b Washer 2 18-8 SST H30209M
18 Clevis Pin 2 17-4 PH SST Condition H900 Hardened H30610RE
19 Drive Link 1 316 SST ASTM A351 CF-8M H30207EW
20 Washer 2 18-8 SST H30206M
21 E-Ring 2 15-7 PH SST H30554M *
22 Body 1 Aluminum A356-T6 ASTM B26 Anodized E20038AH
23 Bent Link 2 410 SST Hardened H30552M
24 Dust Seal 1 Felt H30214M
26 Sleeve 1 Aluminum A356-T6 ASTM B26 Anodized E20013AH (1004D2) E20026AH (1005E)
27 Cylinder O-Ring 1 See Seal Option Chart See Seal Options *
28 Keeper 3 18-8 SST H30221M
29 Spring, Interlock 1 Carbon Steel Zinc plated H31743M
30 Set screw 1 18-8 SST H30602M *
31 Spring, Cam Arm 5 18-8 SST H06753M
*Items included in seal replacement kits (1004D2SRK)
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.

1-99
API Bottom Loading Coupler 1004D2 /1005E MAINTENANCE
1
SEAL OPTIONS

Nose Seal Shaft Seal Cylinder Seal

Seal Material Coupler Model # Temp Rating
(2) (14) (27)
-20°F - 400°F
Fluorocarbon 1004D2-0402/1005E-0402 H30483M H30808M H30217M
(-29°C - 204° C)
-20°F - 250°F
Buna 1004D2-0401/1005E-0401 H30482M H30259M H30258M
(-29°C - 121° C)
-50°F - 225°F
EPT 1004D2-0404/1005E-0404 H31957M H31955M H31956M
(-46°C - 107° C)
Consult factory for additional seal options.

SEAL REPLACEMENT KITS

OPW 1004D2SRK Seal Replacement Kits include Seal Material Seal Replacement Kit Part #
everything needed to change the seals in the 1004D2/1005E Fluorocarbon 1004D2SRK-0402
Bottom Loading Coupler. Seal Replacement Kits are
always recommended as spare parts. Buna 1004D2SRK-0401
EPT 1004D2SRK-0404
ASSEMBLY
Note: All images depict the 1004D2 (large handles).
API Coupler Installation Preparations The steps for 1005E Coupler (small handles) are the same as 1004D2.
Safety precautions
Warning: Read & understand this instruction Step 2 Install remaining bolts
and tighten down to
before starting installation.
recommended torque
• Coupler to be used for its designated purpose only. value.
• Local regulations for (un)loading must be followed
at all times. Note: Torque value
• Product flow may result in static electricity; is based on
grounding of equipment is required. material and grade
• Although the 1004D2/1005E is designed for higher of bolts used.
pressures, proper measures must be taken within
the system to allow for thermal expansion.
• OPW instructions must be followed for installation.
• Make sure to use adequate personal protection at
all times during operation.
Warning: Under pressure, poppet will cause handle to
Step 1 rotate violently if not restrained.

Step 3 Connect Coupler to

adaptor and slide sleeve
forward. Rotate the
handle locking the sleeve
in position and opening
the poppet.

• Secure whatever device Coupler will be mounted

to (e.g., Loading Arm)
• Sandwich gasket between Coupler and Loading
Device flanges.
• Align Coupler bolt holes with bolt holes on Loading
Device.
• Insert two bolts into the highest bolt holes on the
flange and hand tighten. This is to secure
Coupler, and prevent damage due to bending as
the remaining bolts are installed.
© Copyright 2009, OPW Engineered Systems

1-100
1 -__ __ __ (add variant)

-051 High Pressure Viton

1-101
 1

1-102
1

1-103
 1
Transport
AIR INTERLOCK VALVES Systems

Three-way Air Valves

Play it safe with this lightweight valve that locks up the brakes on the trailer, Features
preventing it from leaving the loading rack while connected to the loading arm. This
three-way air valve can be used normally open or normally closed, has an adjustable Heat-treated, anodized aluminum
construction.
stem, and comes with standardized TTMA and API mounting holes. The anodized
aluminum valve is used on all API bottom loading adapters and all Vapor Check Valves. ¼” NPT connection ports.
Field seviceable.
880-0-0 ¾ ACTUATION
DISTANCE Adjustable stem button.
2.06
(52.32)

2.13
(58.35)

3.56 to 3.84 1.06

(90.49 to 97.64) (26.92)

880-0-0 ¾ ACTUATION
DISTANCE

2.13
(58.35)

O
3.5 1.06
(88.90) (26.92)

880-0-0

¾ ACTUATION
DISTANCE

2.13
(58.35)

4.19 1.06
(106.43) (26.92)

model Unit 880-0-0 880-0-0 880-0-0

Width (Inches/Millimeters) 3.00/76.2 3.00/76.2 3.00/76.2
Length (Inches/Millimeters) 4.25/107.96 4.25/107.96 4.25/107.95
Pounds 0.69 0.69 0.69
Kilograms 0.31 0.31 0.31

1-104
1
Transport
Systems AIR INTERLOCK VALVES

Air Interlock Valves Parts List

22
8 21
7 17
12 16 20

6 14 6 19

6
5 5
10 10
10 5
4
15 18
11 11
11

10 10

3 3 10
9 2 9 13
(NOT SHOWN) (NOT SHOWN) 3
1 9 2
1 (NOT SHOWN)
1
-01 MODEL -02 MODEL
-03 MODEL

Qty. reQ. Qty. reQ.

# Part name -0 -0 -0 Part nUmber # Part name -0 -0 -0 Part nUmber
1 Plug - Nut 1 1 1 880-145-01 14 Spool & O-ring Assembly, Roller Tip 0 1 0 880-171-02
2 Body Air Valve 1 0 1 880-323-01 15 Screw 6-32 × 0.62 (Self Sealing) 0 1 0 11477-01
3 Spring 1 1 1 880-148-01 16 Rollpin 0 1 0 881-119-01
4 Spool & O-ring Assembly 1 0 1 880-171-01 17 Roller 0 1 0 881-119-01
5 Retaining Ring 1 1 1 11090-04 18 Spool & O-ring Assembly 0 0 1 881-122-01
6 Dust Seal 1 1 1 880-142-01 19 Washer 5/16 Int. Lock 0 0 1 11163-05
7 Nut - ¼-20 Hex Jam 1 0 0 11021-03 20 Actuator - Offset 0 0 1 881-120-01
8 Screw Adjuster 1.0 1 0 0 880-144-01 21 Washer 5/16 Int. Lock 0 0 1 11163-05
9 Screw ¼-20 × 1.75 Hex Head 2 2 2 11063-07 22 Nut - 5/16-18 Hex 0 0 1 11179-05
10 O-ring 2 2 2 11134-01 880-150-01 Service Kit* 1 0 0 90012
11 O-ring 1 1 1 11134-02 880-150-02 Service Kit** 0 1 0 90055
12 Washer - ¼ Int. Lock 1 0 0 11163-04 880-150-03 Service Kit*** 0 0 1 90056
13 Body-Air Valve, Roller Tip 0 1 0 880-323-02
* Note: Service Kit includes: (1) #3, (1) #4, (1) #5, (1) #6, (1) #7, (1) #8, (1) #12
**Note: Service Kit includes: (1) #3, (1) #5, (1) #6, (1) #14, (1) #15, (1) #16, (1) #17
***Note: Service Kit includes: (1) #3, (1) #5, (1) #6, (1) #18, (1) #19, (1) #20, (1) #21, (1) #22

Part nUmber desCriPtion

880-113-01 Screw Adjustor Assembly 1.5” Button
880-150-01 Three-way Air Interlock Valve
880-150-02 Three-way Air Interlock Valve, Roller Tip
880-150-03 Three-way Air Interlock Valve, Offset Actuator

1-105
 1

880-256

880-155

1-106
1

Air Interlock Valve Model 200

Replacement Par t s

Air Interlock Valve Model 201

1-107
 1
Transport
GRAVITY DROP ADAPTERS Systems

Male Gravity Drop Adapter

880-4-0
5.64
(143.25)

22.5˚

4 IN MALE CAM
& GROOVE

model Unit 880-40-0 880-4-0

Size (Inches/Millimeters) 3.00/76.2 4.00/101.6
Weight (Pounds/Kilograms) 4.00/1.81 5.00/2.27

Male Gravity Drop Adapter Part List

3 2

# Part name Part nUmber # Part name Part nUmber

1 Rubber Gasket 880-206-01 5 Double Loop Chain 880-115-02
2 4” Drop Adapter - Body Only 880-412-01 6 S-Hook 11110-01
3 Groove Pin 11125-07 7 Protective Closure 11065-08
4 Cam Arm & Pull Ring Assembly 774-116-03 3” Drop Adapter - Body Only 880-413-01

Part nUmber desCriPtion

880-410-01 3˝ Male Cam & Groove
880-411-01 4˝ Male Cam & Groove
880-206-01 Gasket - API End

1-108
1

1-109
 1

1-110
1

876-AL40 4” & 876-AL4030 4 X 3 Gravity Coupler

PARTS BREAK DOWN

Drawing shown is the AL40 / 4" drop

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.
1 10918 GASKET 1 7 H20050M1 FINGER RING 1
2 10919 LANYARD 1 3A 11026 BODY, MACHINED / AL4030 1
3 11027 BODY, MACHINED AL40 1 ( Not Shown ) 4 X 3 GRAVITY COUPLER

4 H711321 LOCKING BLOCK 1

5 H711331 CAM LEVER 1 REPAIR KITS
1
6 H71149 CAM PIN 1 11474 CAM LEVER REPAIR KIT
1—Included in 11474

Rev. +, January 2009

1-111
 1

871A-AL40 4" Gravity Coupler

Replacement Par t s
Rev. 0, January 2003

A A

5 6

Repair Kit
Part # 871ARMKIT

3
SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.

1 E00221A BODY 1 5 H20550M FINGER RING 2

2 H08347M GASKET (BUNA) 1 6 H20144M GROOVE PIN 2
3 H20325M CHAIN 1 7 H08328M CONNECTOR RING 1
4 D10184M KAM ARM 2

1-112
1

871A-AL4030 4" x 3" Gravity Coupler

Replacement Par t s
Rev. 0, January 2003

A A

5 6

3
SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.

1 E10086A BODY 1 5 H20550M FINGER RING 2

2 H08347M GASKET (BUNA) 1 6 H20144M GROOVE PIN 2
3 H20325M CHAIN 1 7 H08328M CONNECTOR RING 1
4 D10184M KAM ARM 2

1-113
 1

1-114
1

871ED-AL40 4" Gravity Coupler

Replacement Par t s
Rev. 0, January 2003
17

14

A A

16

11
15

10
8
1
7
9
4

13

12

6 5

SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.

1 E00227A BODY 1 10 H07724M STUFFING BOX 1

2 C10116DI LEVER 1 11 H07725M O-RING (BUNA) 1
3 D10184M KAM ARM 2 12 H08347M GASKET (BUNA) 1
4 H01186M COTTER PIN 1 13 H08475 POPPET 1
5 H04139M PIN 1 14 H20144M GROOVE PIN 2
6 H06111RP BUSHING 1 15 H20342M DRIVE PIN 1
7 H06121RP SHAFT RETAINER 1 16 H20345RE SHAFT 1
8 H06281M O-RING (BUNA) 1 17 H20550M FINGER RING 2
9 H06364M WASHER 1

1-115
 1

1-116
1

1-117
 1

F499

4" API Dust Cap

FEATURES AND BENEFITS

API ADAPTER
Durable, easy to use aluminum dust cap suitable for all API valves manufactured to API RP1004.

• Suitable for F5000, F5001, F5002 & F552

series API valves.
• Protects poppet face of API, prolongs life
of seals.
• High quality die cast body and component
materials to international standards are
used for durability and performance.
• Radial cam and lug design for one hand
operation.
• Glass filled nylon cams reduce wear and
eliminate risk of corrosion.
• Buna seal fitted as standard.
• Heavy duty stainless steel chain supplied
as standard for attachment to API adapter.
• 19" chain as standard.

VARIANTS
PART NO. DESCRIPTION WEIGHT

F499-121 Buna, with Chain 2.0 lbs.

230.00

45.00 180.00

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-118
1
F499

4" API Dust Cap

4 4a

SPECIFICATIONS
ITEM PART NO.
NO. DESCRIPTION QTY. F499-121 MATERIAL
1 Cam Lug 1 561474 Nylon
2 Cam Arm & Ring Assembly 1 492345 Nylon/sst
3 Pins 2 409793 Stainless Steel
4 Chain & Link Assembly 1 670311 Stainless Steel
4a Optional Chromed Chain Assembly 1 491544 Steel/Chrome
5 Dust Cap Body 1 619646 Aluminum
6 Seal 1 619127 Buna
7 Open End Link 1 563504 Steel

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-119
 1
Transport
Systems VAPOR CHECK VALVES

Threaded Vapor Check Valve

Use this Vapor Check Valve to return vapor to the truck during terminal loading Features
and service station drops. The 3-inch poppet opens when coupled and closes when
disconnected, preventing the vapors from escaping into the atmosphere. The valve has Anodized aluminum construction.
3-inch or 4-inch female NPSM threads, a 4-inch cam and groove, and tapped mounting Stainless steel stem and spring.
holes for the EBW Air Interlock Brake. The 303 series is available without a poppet to Buna-N gasket.
serve as a male quick coupler with an Air Interlock Valve mounting pad.
Aluminum guide.

0-00-0
5.44
(138.17)

2.5
(63.5)

4.69
(125.47)
3” N.P.S.M.
THREADS

0-444-04
5.94
(138.17)

2.5
(63.5)

4.69
(125.47)
4” N.P.S.M.
THREADS

model Unit 0-00-0 0-00-0 0--0 0-444-04

Poppet Yes Yes No No
Thread Size 3.00-NPSM 4.00-NPSM 3.00-NPSM 4.00-NPSM
Weight (Pounds/Kilograms) 4.50/2.04 4.81/2.18 3.81/1.73 4.31/1.96

Dimensional Drawings

1-120
1
Transport
VAPOR CHECK VALVES Systems

Threaded Vapor Check Valve Parts List

0-00-0/0-00-0
1 34 5 6 7 8 AIR BRAKE 24 5 6 7 8 AIR BRAKE
MOUNTING PAD MOUNTING PAD

10
9

4.81 4.81
(122.2) (122.2)

5.44 5.94
(138.2) (150.9)
3” MODEL 4” MODEL

# Part name Part nUmber # Part name Part nUmber

1 Vapor Recovery Adapter - 3” N.P.S.M. 300-305-02 6 Spring - Poppet 300-105-01
2 Vapor Recovery Adapter - 4” N.P.S.M. 300-302-02 7 Guide - Poppet Stem 300-205-01
3 Vapor Recovery Adapter - 3” B.S.P.P. 300-305-32 8 Retaining Ring 11090-02
4 O-ring 11039-15 9 3” Gasket Cover 770-201-02
5 Poppet 300-203-01 10 4” Gasket Cover 770-201-03

0-444-04/0--0
1 4” VAPOR RECOVERY ADAPTER 4.50
WITH AIR BRAKE MOUNTING

5.94

770-201-03
GASKET

.25
5.25

# Part name Part nUmber # Part name Part nUmber

1 4” Vapor Recovery Adapter 300-302-02 2 Gasket 3” Fill Adapter 770-201-02
1 3” Vapor Recovery Adapter 300-305-02 2 Gasket Cover 770-201-03

0--0

Part name Part nUmber

3” N.P.S.M. Vapor Recovery Adapter, with Poppet 301-300-01
4” N.P.S.M. Vapor Recovery Adapter, with Poppet 301-300-02
3” N.P.S.M. Vapor Recovery Adapter, No Poppet 303-333-03
4” N.P.S.M. Vapor Recovery Adapter, No Poppet 303-444-04

1-121
 1
Transport
VAPOR CHECK VALVES Systems

Flanged Vapor Check Valve

The sight glasses featured on this vapor recovery fitting can help detect liquid
accumulation in the vapor manifold of a transport. A drain plug lets any extra fuel
drain out, and the poppet prevents vapors from escaping when disconnected from
the hose. A low pressure drop makes flow rates faster and vapor recovery safer. The
adapter is constructed with a standard 4-inch TTMA flange, a 4-inch cam and groove,
and a mounting pad for the Air Interlock Valve.

0-00-0 8.0
(203.2)

6.75
(171.45)

4” TTMA
FLANGE

0-00-0 8.0
(203.2)

6.75
(171.45)

4” TTMA
FLANGE

model Unit 0-00-0 0-00-0 0-400-0

Size (Inches/Millimeters) 4.00/101.6 4.00/101.6 4.00/101.6
Weight (Pounds/Kilograms) 6.00/2.72 6.00/2.72 6.00/2.72

Dimensional Drawings

1-122
1
Transport
Systems VAPOR CHECK VALVES

Flanged Vapor Check Valve Parts List

8 (203.2) 8 (203.2)

1 2 3 4 5 1 2 3 4 5

8 8

6.75 6.75
(171.45) (171.45)

A A

6 7
-01 MODEL -02 MODEL
WITH SIGHT GLASS & DRAIN WITHOUT SIGHT GLASS & DRAIN

# Part name Part nUmber # Part name Part nUmber

1 Vapor Recovery Body 302-400-01 5 4” Poppet Vapor Recovery Adapter 300-203-01
2 Retaining Ring 11090-02 6 Pipe Plug 11010-02
3 Poppet Stem Guide 300-205-01 7 Sight Glass 11215-04
4 Poppet Spring 300-105-01 8 O-ring 11039-15

Part nUmber desCriPtion

302-300-01 Flanged Vapor Check Valve with Sight Glass
302-300-02 Flanged Vapor Check Valve without Sight Glass
302-400-02 Flanged Vapor Check Valve without Sight Glass, No Poppet

302-300-01 ( with sight glass ) 302-300-02 ( no sight glass )

1-123
 1

611F Flanged Vapor Recovery Coupler

Replacement Par t s
Rev. 0, May 2006
A
3 7 1 8 9 10 11 7/16" DIA.
8 PLACES ON
5 7/8" DIA. B.C.

SECTION A-A A

610F Flanged Vapor Recovery Coupler

A
1 7/16" DIA.
8 PLACES ON
5 7/8" DIA. B.C.

SECTION A-A A

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.

9 H20389RE POPPET STEM 1

1
1 9951 BODY 1
2 10068 PLUG (1/4 NPT) 1 10 C02642M BRIDGE GUIDE 1
SEAT RING (BUNA) 1
1
3 H10043M 1 11 H08607M RETAINING RING
RETAINER (SMALL)
1
4 H20433M 1
5 H20235M SPACER 1
1
REPAIR KITS
6 H20446M CAP SCREW 1
1
PART NUMBER DESCRIPTION QTY.
7 RETAINER (LARGE) 1
1
H20432M H20695 POPPET SUB-ASSEMBLY N/A
8 H08989M SPRING 1 1- Included in H20695

1-124
1

611FB Flanged Coupler with Sight Glass

Replacement Par t s
A Rev. 0, May 2006
3 7 1 8 9 10 11 7/16" DIA.
8 PLACES ON
5 7/8" DIA. B.C.

17 16 15
12 13 14
A
SECTION A-A

610FB Flanged Coupler with Sight Glass

A
1 7/16" DIA.
8 PLACES ON
5 7/8" DIA. B.C.

17 16 15
12 13 14
A
SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.

1
2
1 9951 BODY 1 12 C10316M SIGHT GLASS
PLUG (1/4 NPT) 1 13 H51384M BALL (FLOAT) 1
2
2 10068
SEAT RING (BUNA) O-RING
2
14 H51437M 1
1
3 H10043M 1
RETAINER (SMALL)
1
15 SCREW 4
2
4 H20433M 1 H51477M
16 WASHER 4
2
5 SPACER 1 H20312M
1
H20235M
6 1 17 H20057M 4
1 2
H20446M CAP SCREW LOCK WASHER
7 H20432M RETAINER (LARGE) 1
1

8 H08989M SPRING 1 REPAIR KITS

9 H20389RE POPPET STEM 1
1
PART NUMBER DESCRIPTION QTY.
10 C02642M BRIDGE GUIDE 1 H20695 POPPET SUB-ASSEMBLY N/A
11 H08607M RETAINING RING 1 861BRK SIGHT GLASS REPAIR KIT N/A
1- Included in H20695, 2 - Included in 861BRK

1-125
 1
Transport
VAPOR CAPS Systems

These lockable vapor caps act like dust covers, but won’t activate the Air Interlock Valve Features
when used on vapor check valves and adapters. Iron-copper infiltrated cams create a
solid push-down-and-pull-up movement for quick, easy removal and replacement; steel Meets API RP 1004 Standard.
latches hold the caps secure. Orange in color to indicate vapor recovery, the caps Aluminum or glass-filled nylon
can be used with any 4-inch male cam and groove. Caps also available with finger ring construction.
and chains. Iron-copper infiltrated cams and
steel latches.
04-00-0 1.25 Lockable.
(31.75)

7
(177.8)

04-0-0 0.88
(22.35)

6.25
(158.75)

model Unit 04-00-0 04-00-0 04-00-04 04-00-0 04-0-0 04-0-0

Size (Inches/Millimeters) 4.00/101.6 4.00/101.6 4.00/101.6 4.00/101.6 4.00/101.6 4.00/101.6
Weight (Pounds/Kilograms) 1.19/.54 1.19/.54 1.19/.54 1.19/.54 1.19/.54 1.19/.54
Gasket No. 777-111-01 777-111-02 304-105-01 304-105-01 777-110-04 777-110-04

1-126
1

1711T 3" Dust Cap

Replacement Par t s
Rev. 0, January 2003

A A

1
SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY.

1 H10866M GASKET (BUNA) 1

1-127
 1
 


Betts internal air emergency valve meets the
requirements of an internal self-closing stop
valve. Body is constructed of aluminum and
incorporates a shear section that satisfies
49CFR178.345-8 tested per TTMA RP 84. The
1/8” NPT air inlet fitting separates with shear
section to dump air pressure and insure the valve
closes in case of an under-ride accident. Fusible
plug installed in valve to dump air pressure if

temperatures exceed 212°F. Valves are
®
designed and manufactured to use Teflon
encapsulated seals for compatibility with a wide
range of products. Other seal options are also
available. Internal air cylinder saves space on
exterior of valve providing maximum clearance
for piping. Air cylinder is hard-coated with hard-
anodized shaft. Valves are equipped with a
stainless steel jackscrew that allows for manual
operation of the valve in case of an air system
failure. Rated 140 psi minimum burst pressure.

See section 30 Page 13B for 4” parts list.

Inlet Flange Outlet Dimensions Fb-max Valve MAWP *
Assembly (4” Sump) (4” TTMA) Per Based on max tank
Size Wt.
No.  pressure valve can open
B.C 8 Holes B.C. 8 Holes A B RP86
against w/ given air line
pressure.
4” Straight 4” GROOVED 6.50” 8.0 lb.
Grooved EV46909ALTS O.D. 4.5” [114.3 mm] [165 mm]
N.A. [3.6 kg]
7.25” .563” Dia. 24,000 lb.
4” Straight [184 mm] [14.3 mm] 5.88” .438” Dia. 6.50” 8.5 lb. [10,886 kg]
EV46910ALTS N.A. 18 psi w/ 80 psi air
Flanged [149 mm] [11.1 mm] [165 mm] [3.9 kg] line pressure
4” Elbow 4” GROOVED 4.38” 6.25” 8.7 lb.
Grooved EV46911ALTS O.D. 4.5” [114.3 mm] [111.3 mm] [158.8 mm] [4.0 kg] 25 psi w/ 100 psi air
7.25” .563” Dia. 44,400 lb.
4” Elbow [184 mm] [14.3 mm] 4.88” .438” Dia. 4.38” 5.00” 9.0 lb. [20,140 kg] line pressure
Flanged EV46912ALTS [149 mm] [11.1 mm] [111.3 mm] [127.0mm] [4.1 kg]

4” Tee 4” GROOVED 4.38” 6.63” 10.5 lb. 35 psi w/ 135 psi air
Grooved EV46991ALTS O.D. 4.5” [114.3 mm] [111.3 mm] [168.4 mm] [4.8 kg] line pressure
7.25” .563” Dia. 32,000 lb
4” Tee [184 mm] [14.3 mm] 4.88” .438” Dia. 4.38” 5.13” 10.8 lb. [14,515 kg]
Flanged EV46992ALTS [149 mm] [11.1 mm] [111.3 mm] [130.3mm} [4.9 kg]

* Values shown are test values. Actual values may

vary due to service conditions. Part # Valve Temp.
Description 
Suffix Range *
** Last two letters of part number designate seal Teflon product contact seals,
–40°F to +220°F
material. See material table at right for seal TS nitrile interior seals, and
[-40°C to 104°C]
polyurethane air piston seal.
options.
Teflon product contact seals, –20°F to +400° F
TS030 FKM “A” interior seals. [-29°C to 204°C]
 Fusible plug melts at 212°F [100°C]. If valve is Teflon product contact seals,
–50°F to +220° F
subject to higher temperatures, the fusible plug TS038 fluorosilicone interior seals, and
polyurethane air piston seal. [-45°C to 104°C]
must be relocated to isolate fusible from heat.
FKM “BLT” product contact seals –20°F to +220° F
VB w/ polyurethane air piston seal. [-29°C to 104°C]
CAUTION: Valve must be properly installed and
maintained. Never bottom load through emergency valve FKM “GFLT-s” product contact
–20°F to +220° F
without first opening valve. Failure to do so may result in VF seals w/ polyurethane air piston
seal. [-29°C to 104°C]
damage to the tank and/or valve.
TM
July 2009

1-128
1


GROOVED ELBOW SHOWN.
PART LISTS ARE THE SAME
FOR 4” ELBOW, STRAIGHT
AND TEE VALVES.

No. Description Req. Material Part No. No. Description Req. Material Part No.
1 3” Air Cylinder 1 Alum. (356-T6) 36001AL 12 O-Ring 3” Face 1 Tef-Sil 75410TS
2 3” Piston 1 Alum. (319) 75092AL Nitrile 75159BN
Polyurethane 75564PY FKM “A” 75159VT
O-Ring Air Inlet
3 3” U-Cup Seal 1 Nitrile 17669BN 13 1 FKM “BLT” 75159VB
Shaft
FKM “A” 17669VT FKM “GFLT-s” 75159VF
Nitrile 3357BN Fluorosilicone 75159FS
FKM “A” 3357VT Nitrile 75096BN
Piston/Shaft
4 2 FKM “BLT” 3357VB FKM “A” 75096VT
O-Ring O-Ring Air Inlet
FKM “GFLT-s” 3357VF 14 1 FKM “BLT” 75096VB
Shaft Bore
Fluorosilicone 3357FS FKM “GFLT-s” 75096VF
5 Spring 1 Steel (E-Coated) 18222EY Fluorosilicone 75096FS
6 Air Supply Shaft 1 Alum. Anodized 75090AL 15 Seal Retainer 1 Aluminum 75100AL
7 Cap Screw 4 18-8 SS 9Q5822 Nitrile 75426BN
8 Lock Washer 4 304 SS 9Q5844 FKM “A” 75426VT
O-Ring Seal
9 4” O-Ring Holder 1 Alum. (319) 28157AL 16 1 FKM “BLT” 75426VB
Retainer
Tef-Sil 19935TS FKM “GFLT-s” 75426VF
Nitrile 19935BN Fluorosilicone 75426FS
4” Main Seat
10 1 FKM “A” 19935VT 17 Shaft U-Cup Seal 1 Teflon/301 SS 75210SSTF
O-Ring
FKM “BLT” 19935VB 18 Fusible Plug 1 Brass/Solder FP15003BR
FKM “GFLT-s” 19935VF 19 Air Inlet Frangible 1 Aluminum 75108AL
Nitrile 75097BN 20 Breather Plug 1 Steel (Nic. Plt.) 9Z4895
FKM “A” 75097VT 21 Jack Screw 1 303 SS/Nitrile 75141SLBN
O-Ring 3” Air
11 1 FKM “BLT” 75097VB 22 1/8” NPT Plug 1 316 SS 9V4921
Cylinder Bore
FKM “GFLT-s” 75097VF
Fluorosilicone 75097FS

Seal Kit # EV75435ALTS includes: (12) 75410TS, (17) 75210SSTF, (3) 17669BN, (4) 3357BN -2, (11) 75097BN, (13) 75159BN, (14) 75096BN,
(15) 75100AL, & (16) 75426BN.

Seal Kit # EV75435ALTS038 (low temp.) includes: (12) 75410TS, (17) 75210SSTF, (2) 75092AL, (3) 75564PY, (4) 3357FS -2, (11) 75097FS,
(13) 75159FS, (14) 75096FS, (15) 75110AL, & (16) 75426FS.

WARNING: Use only genuine BETTS INDUSTRIES INC. replacement parts. Substitute parts can impair the proper function of this product.

TM
July 2009

1-129
 1
 


Betts internal air emergency valve meets the 3.31" [84.1mm]
requirements of an internal self-closing stop B
valve. Body is constructed of aluminum and
incorporates a shear section that satisfies
49CFR178.345-8 tested per TTMA RP 84. The 4.90"
1/8” NPT air inlet fitting separates with shear [124.5mm]
section to dump air pressure and insure the valve A
closes in case of an under-ride accident. Fusible
plug installed in valve to dump air pressure if B
 A
temperatures exceed 212°F. Valves are STRAIGHT
®
designed and manufactured to use Teflon
encapsulated seals for compatibility with a wide
range of products. Other seal options are also ELBOW
available. Internal air cylinder saves space on
exterior of valve providing maximum clearance
for piping. Air cylinder is hard coated with hard-
anodized shaft. Valves are equipped with a A
stainless steel jackscrew that allows for manual
operation of the valve in case of an air system
failure. Rated 140 psi minimum burst pressure.
TEE
See section 30 Page 12B for 3” parts list.
Inlet Flange Outlet Dimensions Fb-max Valve MAWP *
Assembly (3” Sump) (3” TTMA) Per Based on max tank
Size Wt.
No.  pressure valve can open
B.C 6 Holes B.C. 8 Holes A B RP86
against w/ given air line
pressure.
3” Straight 3” GROOVED 5.71” 7.3 lb.
Grooved EV46964AL** O.D. 3.5” [88.9 mm] [145 mm]
N.A. [3.3 kg]
6.25” .563” Dia. 25,800 lb.
3” Straight [159 mm] [14.3 mm] 4.88” .438” Dia. 4.25” 7.5 lb. [11,702 kg]
Flanged EV46967AL** [124 mm] [11.1 mm] [108 mm]
N.A. [3.4 kg] 25 psi w/ 80 psi air
3” Elbow 3” GROOVED 3.50” 6.06” 8.1 lb. line pressure
Grooved EV46934AL** O.D. 3.5” [88.9 mm] [88.9 mm] [153.9 mm] [3.67 kg]
6.25” .563” Dia. 50,400 lb.
3” Elbow [159 mm] [14.3 mm] 4.88” .438” Dia. 3.50” 4.50” 8.3 lb. [22,861 kg]
Flanged EV46947AL** [124 mm] [11.1 mm] [88.9 mm] [114.3mm] [3.76 kg]
35 psi w/ 100 psi air
3” Tee 3” GROOVED 3.50” 5.94” 8.8 lb.
Grooved EV46980AL** O.D. 3.5” [88.9 mm] [88.9 mm] [150.9 mm] [3.99 kg]
line pressure
6.25” .563” Dia. 36,200 lb
3” Tee [159 mm] [14.3 mm] 4.88” .438” Dia. 3.50” 4.50” 9.2 lb. [16,420 kg]
Flanged EV46981AL** [124 mm] [11.1 mm] [88.9 mm] [114.3mm [4.17 kg]

* Values shown are test values. Actual values may

vary due to service conditions. Part # Valve Temp.
Description
Suffix Range *
** Last two letters of part number designate seal Teflon product contact seals,
–40°F to +220°F
TS nitrile interior seals, and
material. See material table at right for seal polyurethane air piston seal.
[-40°C to 104°C]
options. Teflon product contact seals, –20°F to +400° F
TS030 FKM “A” interior seal. [-29°C to 204°C]
 Fusible plug melts at 212°F [100°C]. If valve is Teflon product contact seals,
–50°F to +220° F
subject to higher temperatures, the fusible plug TS038 fluorosilicone interior seals, and
polyurethane air piston seal. [-45°C to 104°C]
must be relocated to isolate fusible from heat.
FKM “BLT” product contact seals –20°F to +220° F
VB w/ polyurethane air piston seal. [-29°C to 104°C]
CAUTION: Valve must be properly installed and
FKM “GFLT-s” product contact
maintained. Never bottom load through emergency valve –20°F to +220° F
VF seals w/ polyurethane air piston
without first opening valve. Failure to do so may result in seal. [-29°C to 104°C]
damage to the tank and/or valve.
TM
June 2009

1-130
1 

GROOVED ELBOW SHOWN.
PART LISTS ARE THE SAME 1
FOR 3” ELBOW, STRAIGHT 7
AND TEE VALVES. 2
8
11 3

9 12 4

5 6
10

13
14 18
20
15

16
21
4
22
19
17

No. Description Req. Material Part No. No. Description Req. Material Part No.
1 3” Air Cylinder 1 Alum. (356-T6) 36001AL 12 O-Ring 3” Face 1 Tef-Sil 75410TS
2 3” Piston 1 Alum. (319) 75092AL Nitrile 75159BN
Polyurethane 75564PY FKM “A” 75159VT
O-Ring Air Inlet
3 3” U-Cup Seal 1 Nitrile 17669BN 13 1 FKM “BLT” 75159VB
Shaft
FKM “A” 17669VT FKM “GFLT-s” 75159VF
Nitrile 3357BN Fluorosilicone 75159FS
FKM “A” 3357VT Nitrile 75096BN
Piston/Shaft
4 2 FKM “BLT” 3357VB FKM “A” 75096VT
O-Ring O-Ring Air Inlet
FKM “GFLT-s” 3357VF 14 1 FKM “BLT” 75096VB
Shaft Bore
Fluorosilicone 3357FS FKM “GFLT-s” 75096VF
5 Spring 1 Steel (E-Coated) 18222EY Fluorosilicone 75096FS
6 Air Supply Shaft 1 Alum. Anodized 75090AL 15 Seal Retainer 1 Aluminum 75100AL
7 Cap Screw 4 18-8 SS 9Q5822 Nitrile 75426BN
8 Lock Washer 4 304 SS 9Q5844 FKM “A” 75426VT
O-Ring Seal
9 3” O-Ring Holder 1 Alum. (319) 35914AL 16 1 FKM “BLT” 75426VB
Retainer
Tef-Sil 17944TS FKM “GFLT-s” 75426VF
Nitrile 17944BN Fluorosilicone 75426FS
3” Main Seat
10 1 FKM “A” 17944VT 17 Shaft U-Cup Seal 1 Teflon/301 SS 75210SSTF
O-Ring
FKM “BLT” 17944VB 18 Fusible Plug 1 Brass/Solder FP15003BR
FKM “GFLT-s” 17944VF 19 Air Inlet Frangible 1 Aluminum 75108AL
Nitrile 75097BN 20 Breather Plug 1 Steel (Nic. Plt.) 9Z4895
FKM “A” 75097VT 21 Jack Screw 1 303 SS/Nitrile 75141SLBN
O-Ring 3” Air
11 1 FKM “BLT” 75097VB 22 1/8” NPT Plug 1 316 SS 9V4921
Cylinder Bore
FKM “GFLT-s” 75097VF
Fluorosilicone 75097FS

Seal Kit # EV75435ALTS includes: (12) 75410TS, (17) 75210SSTF, (3) 17669BN, (4) 3357BN -2, (11) 75097BN, (13) 75159BN, (14) 75096BN,
(15) 75100AL, & (16) 75426BN.

Seal Kit # EV75435ALTS038 (low temp.) includes: (12) 75410TS, (17) 75210SSTF, (2) 75092AL, (3) 75564PY, (4) 3357FS -2, (11) 75097FS,
(13) 75159FS, (14) 75096FS, (15) 75110AL, & (16) 75426FS.

WARNING: Use only genuine BETTS INDUSTRIES INC. replacement parts. Substitute parts can impair the proper function of this product.

TM
June 2009

1-131
 1
- (Obsolete)

1-132
1 - (Obsolete)

1-133
 1

1-134
1
Emergency Valve STRAIGHT

Aluminum Tapered Seat Style

• Air or Cable Operated

• Stainless Trim

• Teflon Encapsulated Seals

Betts tapered seat emergency valves are designed and

manufactured to use Teflon encapsulated seals for
compatibility with a wide range of products. Body is
constructed of aluminum with stainless steel trim. Shear
section tested per TTMA RP84 and meets 49CFR178.345-8.

Air operated valves are provided with an external air cylinder

to help prevent gasoline or other products from
contaminating the air supply. The air cylinder is hard-coated
aluminum with a polished stainless steel shaft. Cylinders
have 1/8” NPT port for air connection and are supplied with a
fusible plug installed.

Cable operated valves are supplied with a universal lever

arm which provides up to 8 cable travel options to work with
most operators. Lever arm is “E” Coated to provide
exceptional corrosion resistance.

Left-hand valves are available with air cylinder or cable lever

arm on opposite side of valve as shown at right. Add suffix –
005 for left-hand option. Add suffix –004 for optional screen.

See section 30 Page 11A for parts list

Assembly Air Dimensions Inlet Flange Outlet Flange

Size Outlet Wt.
No. /Cable A B.C. Holes B.C. Holes
EV46461ALTS Air 4” Grv 13.5
6.50” 7.25” 8-9/16 N.A. N.A.
EV46464ALTS Cable 4” Grv 10.0
EV46462ALTS Air 4- ½ ” Grv 13.5
4” 6.50” 7.25” 8-9/16 N.A. N.A.
EV46465ALTS Cable 4- ½ ” Grv 10.0
EV46460ALTS Air 4” Flg 13.5
6.50” 7.25” 8-9/16 5.88” 8-7/16
EV46463ALTS Cable 4” Flg 10.0

Force rating from TTMA RP86: 4” Valves: Fb-max=15,000 lb.

CAUTION: Never bottom load through emergency valves without first opening valve. Failure to do so may result
in damage to the tank and/or valve.

TM
Sept 1997
INDUSTRIES, INC.
WARREN, PA.

1-135
 1
PARTS LIST Emergency Valve
3” Tapered Seat Aluminum

Stuffing Box Detail

Air Operated Cable Operated

NO. REQ. DESCRIPTION MATERIAL PART NO.
1 1 Bail Pin 3/16 dia. X 1” Stnls 18-8 9Q5901
2 1 Stem Stnls 316 26886SS
3 1 Bonnet Stnls 316 18770SS
4 1 Spring Washer & Shaft Guide Teflon W/Glass 18881TG
5 1 Spring Stnls 316 18222SS
6 1 O-Ring Holder Aluminum 18768AL
7 1 Guide Ring Teflon 18283TF
Viton 18098VT
8 1 O-Ring Seat
Tef - Sil 18098TS
9 1 Retainer Plate Aluminum 18769AL
10 1 Lockwasher ½” external Tooth Stnls 410 9Q5916
11 1 Hex Half Nut ½-20UNF Stnls 304 9Q5909
12 1 Retaining Ring - Cam Stnls 410 9Q4933
13 1 Cam Stnls 316 19021SS
14 1 Retainer Sleeve Teflon W/Glass 18467TG
Viton 17946VT
15 2 O-Ring Cam Shaft
Tef-Sil 17946TS
16 1 Cam Shaft Stnls 316 27340SS
17 1 Retaining Ring – Cam Shaft Stnls 316 9Q4970
Viton 17945VT
18 1 O-Ring Gland
Tef-Sil 17945TS
19 1 Retaining Ring - Gland Stnls 316 9Q4968
20 1 Gland Aluminum 17821AL
21 1 Bolt ¼-20UNC x 1.50 lg. Steel - Zinc Plt. 9Q5947
22 1 Lockwasher ¼” Steel - Zinc Plt. 9Q5845
23 1 Hex Nut ¼-20UNC Steel - Zinc Plt. 9Q5806
24a 1 Lever Arm - Air Steel “E” Coated 18366EY
24b 1 Lever Arm - Cable Steel “E” Coated 10587EY
25 1 Air Cylinder Assembly Aluminum AC35005ALB
26 1 Screen - Optional Stnls 304 17644SL
27 1 Bolt 5/16-18UNC – 1” lg. Steel – Zinc Plt. 9Q5829
28 1 Lockwasher 5/16” Steel – Zinc Plt. 9Q5845
29 1 Hex Nut 5/16-18UNC Thd. Steel – Zinc Plt. 9Q5808

TM
May 1998
INDUSTRIES, INC.
WARREN, PA.

1-136
1
PARTS LIST Emergency Valve
Tapered Seat 4” & 6”x4”

Stuffing Box Detail

Air Operated Cable Operated

PART NO.
NO. REQ. DESCRIPTION MATERIAL
4” VALVE 6”x 4” VALVE
1 1 Bail Pin 3/16 dia. X 1” Stnls 18-8 9Q5901 9Q5901
2 1 Stem Stnls 316 27415SS 27415SS
3 1 Spring Washer & Shaft Guide Teflon W/Glass 19180TG 19180TG
4 1 Spring Stnls 316 18222SS 18222SS
5 1 O-Ring Holder Aluminum 27413AL 27412AL
6 1 O-Ring Seat Tef - Sil 19028TS 18872TS
7 1 Lift Cup Stnls 316 19178SS 19178SS
8 1 Bonnet Plate Stnls 316 27017SS 27184SL
9 1 Lift Stem Stnls 316 19179SS 19179SS
10 1 Lift Arm Stnls 316 27414SS 27414SS
11 1 Clevis Pin ¼ x 1-1/8 Stnls 303 9Q4727 9Q4727
12 1 Cotter Pin 1/8 x 1-1/4 Stnls 316 9Q4939 9Q4939
13 2 Cotter Pin 3/32 x 1-3/4 Stnls 304 9Q5866 9Q5866
14 1 Lift Spring Stnls 302 19183SL 19183SL
15 1 Retaining Ring – Cam Shaft Stnls 9Q4933 9Q4933
16 2 Spacer Sleeve Teflon W/Glass 19034TG 19034TG
17 2 O-Ring Cam Shaft Tef-Sil 17946TS 17946TS
18 1 Cam Shaft Stnls 316 27332SS 27332SS
19 1 Retaining Ring – Cam Shaft Stnls 9Q4970 9Q4970
20 1 Bolt ¼-20UNC x 1.50 lg. Steel - Zinc Plt. 9Q5947 9Q5947
21 1 Lockwasher ¼” Steel - Zinc Plt. 9Q5845 9Q5845
22 1 Hex Nut ¼-20UNC Steel - Zinc Plt. 9Q5806 9Q5806
23a 1 Lever Arm - Air Steel “E” Coated 18366EY 18366EY
23b 1 Lever Arm - Cable Steel “E” Coated 10587EY 10587EY
24 1 Air Cylinder Assembly Aluminum/Buna AC35005ALB AC35005ALB
25 1 Screen - Optional Stnls 304 18969SL 18935SL
26 1 Bolt 5/16-18UNC x 1 lg. Steel - Zinc Plt. 9Q5829 9Q5829
27 1 Lockwasher 5/16” Steel - Zinc Plt. 9Q5847 9Q5847
28 1 Hex Nut 5/16-18UNC Thd. Steel - Zinc Plt. 9Q5808 9Q5808
WARNING Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitue parts can
impair the proper functioning of this product.

Mar 2000
TM

INDUSTRIES, INC.
WARREN, PA.

1-137
 1

1-138
1

1-139
 1

1-140
1

1-141
 1


The 6” Emergency Valve product line 7.63”
offers a lightweight versatile valve [193.8mm]
capable of handling a wide variety of B
products. The valve is available in a
flanged or grooved outlet with available
8.66”
body configurations of straight, 90° [220mm]
elbow, or tee style. The body is A
B
constructed of aluminum and meets
49CFR178.345-8-shear section test per
STRAIGHT
TTMA RP 84. The body, disc holder, A
and bonnet assembly come standard
with a black epoxy e-coat for added
corrosion protection. Valves supplied
with universal lever arm with multiple
mounting holes for versatile cable A ELBOW
attachment. See catalog section 28 and
29 for mechanical operators and remote
control lever.
See Section 30 Page 25B for 6”x6” parts list TEE

Inlet Flange Outlet Dimensions Fb-max

Assembly Wt. Per 
Size MAWP
No. (lbs). 
B.C Holes B.C Holes A B RP86

9.25” 12 Holes 9.38” 14.5lb.

EV47055AY* 6” GROOVED N.A.
[235 mm] .59” Dia. [15 mm] [238.3 mm] [6.58 kg]
6X6 21,690 lb.
Straight 12 Holes [9,838 kg]
9.25” 12 Holes 8.13” 7.94” 14.5lb.
EV47056AY* 7/16” Dia. N.A.
[235 mm] .59” Dia. [15 mm] [206.4 mm]
[11.1 mm]
[201.7 mm] [6.58 kg]

9.25” 12 Holes 7.69” 8.95” 17.3 lb.

EV47059AY* 6” GROOVED
[235 mm] .59” Dia. [15 mm] [195.3 mm] [227.3 mm] [7.82 kg]
6X6 27,041 lb. 12 psi
Elbow 12 Holes [12,265 kg] (82.7 kPa)
9.25” 12 Holes 8.13” 7.69” 7.51” 17.3 lb.
EV47060AY* [235 mm] .59” Dia. [15 mm] [206.4 mm] 7/16” Dia. [195.3 mm] [190.8 mm] [7.82 kg]
[11.1 mm]

9.25” 12 Holes 7.69” 9.01” 19.8 lb.

EV47063AY* 6” GROOVED
[235 mm] .59” Dia. [15 mm] [195.3 mm] [228.9 mm] [8.96 kg]
6X6 27,041 lb
Tee 12 Holes [12,265 kg]
9.25” 12 Holes 8.13” 7.69” 7.62” 19.8 lb.
EV47064AY* [235 mm] .59” Dia. [15 mm] [206.4 mm] 7/16” Dia. [195.3 mm] [193.5 mm] [8.96 kg]
[11.1 mm]

* Last letters of part number designate seal material. See

material table at right for seal options. Letter Mat’l Temp. Range
 Valve MAWP rating is based on the maximum internal tank
BN Nitrile
–40°F to +220° F
pressure that the valve can be opened against. [-40°C to 104°C]
 Temp. Rating: Valve working temp. is dependant on seal VT FKM
–20°F to +400° F
[-29°C to 204°C]
material. See table at right. FEP –40°F to +400° F
TS
Encapsulated Silicone [-40°C to 204°C]

CAUTION: Valve must be properly installed and maintained. Never bottom load through emergency valve
without first opening valve. Failure to do so may result in damage to the tank and/or valve.

TM
Jan. 2007

1-142
1


1
FLANGED STRAIGHT SHOWN.
PARTS LIST THE SAME FOR 2
ELBOW AND TEE VALVES. 3

4
5

6
7
8
9

10
19 18 17

20
16

10 14 15
21 12 13
11

23
22

NO. REQ. DESCRIPTION MATERIAL PART NO.

1 1 6” EV Bail Aluminum E-Coated A11129EY
2 1 Bail Pin Stainless Steel 9Q5901
3 1 Stem Steel Zinc Plated 27300ZC
4 1 6” Spring 316 Stainless Steel SS11288H
5 1 6” Bonnet Aluminum E-Coated A21006EY
6 1 Disc Holder Aluminum E-Coated 28367ALEY001
Nitrile 75463BN
7 1 Seat Seal FKM 75463VT
Tef-Sil 75463TS
8 1 Threaded Stuffing Box Anodized / Aluminum 28359AL
9 1 Stuffing Box Retainer Aluminum 19081AL
10 2 Retaining Ring Steel Zinc Plated 9Q4970
11 1 Internal Snap Ring Stainless Steel 9Q4968
12 1 O-Ring (Cam Shaft) Nitrile 18824BN
Nitrile 19082BN
13 1 O-Ring (Stuffing Box) FKM 19082VT
Teflon 75483SLTF
14 1 Cam Shaft 316 Stainless Steel 36048SS
15 1 Cam Coated Steel 19022MS
16 1 E-Clip Stainless Steel 9Q4933
17 1 ¼-20 Hex Nut Steel Zinc Plated 9Q5806
18 1 ¼” Lockwasher Steel Zinc Plated 9Q5845
19 1 ¼-20 UNC x 1.50 Hex Bolt Steel Zinc Plated 9Q5947
20 1 Universal Lever Arm Steel E-Coated 10587EY
5
21 1 /16-18UNF-1.00 Hex Head Bolt Steel Zinc Plated 9Q5829
5
22 1 /16 Lockwasher ASA Steel Zinc Plated 9Q5847
5
23 1 /16-18 Nut Steel Zinc Plated 9Q5808

WARNING Use only genuine BETTS INDUSTRIES INC. replacement parts. Substitute parts can impair the proper function of this product.
TM
Jan. 2007

1-143
 1

1-144
1

1-145
 1

VA5162 5” X 4” Emergency Valve

PARTS BREAK DOWN

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.
1 6950 CYLINDER BODY 1 15 H50086M LOCK WASHER 4
1
2 6951 CYLINDER DISK 1 16 6964 O-RING, VITON 2
3 6953 STEM 1 17 6233 SPRING (INNER) 1
4 6954 PISTON 1 18 6234 SPRING (OUTER) 1
5 6956 HEX CAP SCREW 4 19 9163 SCREW 1
6 6957 CAP 1 20 6967 SCREW 1
1 1
7 6959 O-RING, TEF-O-SIL 1 21 6969 O-RING, VITON 1
8 69601 SEAL WASHER 1 22 5047 FUSIBLE PLUG 1
9 69611 O-RING, BUNA-N 2 23 11000 SHEAR SCREW 1
1
10 6962 SEAL WASHER 1 24 10344 SEAL WASHER 2
11 11018 MACHINED BODY 1 25 H20312M WASHER 2
12 58651 U-CUP SEAL 2 26 9489 ELBOW AIR FITTING 1
1
13 6966 U-CUP SEAL 1 REPAIR KIT
14 5687 HEX JAM NUT 1 12150 CYLINDER REPAIR KIT
1—Included in 10002

Rev. +, April 2009

1-146
1

VA6162 5” X 4” Emergency Valve

PARTS BREAK DOWN

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.
1 6950 CYLINDER BODY 1 15 H50086M LOCK WASHER 4
1
2 6951 CYLINDER DISK 1 16 6964 O-RING, VITON 2
3 6953 STEM 1 17 6233 SPRING (INNER) 1
4 6954 PISTON 1 18 6234 SPRING (OUTER) 1
5 6956 HEX CAP SCREW 4 19 6965 SEAL SCREW 1
6 6957 CAP 1 20 6967 SCREW 1
1 1
7 6959 O-RING, TEF-O-SIL 1 21 6969 O-RING, VITON 1
8 69601 SEAL WASHER 1 22 5047 FUSIBLE PLUG 1
9 69611 O-RING, BUNA-N 2 23 11000 SHEAR SCREW 1
1
10 6962 SEAL WASHER 1 24 10344 SEAL WASHER 2
11 11035 MACHINED BODY 1 25 H20312M WASHER 2
12 58651 U-CUP SEAL 2 26 9489 ELBOW AIR FITTING 1
1
13 6966 U-CUP SEAL 1 REPAIR KIT
14 5687 HEX JAM NUT 1 12150 CYLINDER REPAIR KIT
1—Included in 10002

Rev. +, April 2009

1-147
 1

VA7162 5” X 4” Emergency Valve

PARTS BREAK DOWN

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.
1 6950 CYLINDER BODY 1 15 H50086M LOCK WASHER 4
1
2 6951 CYLINDER DISK 1 16 6964 O-RING, VITON 2
3 6953 STEM 1 17 6233 SPRING (INNER) 1
4 6954 PISTON 1 18 6234 SPRING (OUTER) 1
5 6956 HEX CAP SCREW 4 19 9163 SCREW 1
6 6957 CAP 1 20 6967 SCREW 1
1
7 6959 O-RING, TEF-O-SIL 1 21 5047 FUSIBLE PLUG 1
8 69601 SEAL WASHER 1 22 11000 SHEAR SCREW 1
9 69611 O-RING, BUNA-N 2 23 10344 WASHER 2
1 1
10 6962 SEAL WASHER 1 24 6969 O-RING, VITON 1
11 11033 MACHINED BODY 1 25 H20312M WASHER 2
12 58651 U-CUP SEAL 2 26 9489 ELBOW AIR FITTING 1
1
13 6966 U-CUP SEAL 1 REPAIR KIT
14 5687 HEX JAM NUT 1 12150 CYLINDER REPAIR KIT
1—Included in 10002

Rev. +, April 2009

1-148
1
Civacon MaxAir™ Air Operated Internal Valve
PARTS LIST FOR TYPICAL VA5142
ITEM PART# DESCRIPTION
1 6963 Valve Body (elbow, Victaulic)
2 6951 Cylinder Disk (aluminum)
3 6962 Seal Washer (Buna/plated steel)
4 6953 Stem (303 stainless steel)
5 5687 Hex Jam Nut (plated steel)
6 6954 Piston (aluminum)
7 6957 Cap (aluminum)
8 6956 Hex Cap Screw (plated steel)
9 9052 1
/4" Exhaust Tubing
10 6950 Cylinder Body (anodized aluminum)
11 6959 O-Ring (TFE-O-Sil)
12 6234 Spring (outer)
13 6233 Spring (inner)
14 6960 Seal Washer (Buna /pld. steel)
15 5865 U-Cup Seal (Buna)
16 6966 Energized U-Cup Seal (Teflon)
17 6969 O-Ring (Viton)
18 6965 Seal Screw (pld. 1/4 — 20 x 1/2)
19 5047 Fusible Plug
20 6633 Lock Washer (plated steel)
21 6967 Screw 1/4 — 20 x 1, 1/2 Fl Thd
22 9054 Elbow Male 1/8 NPT
23 9050 1
/4" Quick Exhaust Valve
24 9102 Clamp 1/2" Nylon
25 9091 Clamp 7/16" Nylon
26 9051 1
/4" Outlet Tubing
27 9103 Screw 8 — 32 x 3/8" Lg Ext. Sems
28 9059 1
/4" Nipple
29 9053 Elbow Female 1/8" NPT
30 6964 O-Ring (Viton)
31 6961 O-Ring (Buna)

MAXAIR AIR OPERATED INTERNAL VALVE ORDERING INFORMATION

TYPE CODE BODY CODE OPERATION CODE SEAL
VA 51 90˚ Elbow/Victaulic 4 Internal Air 1 Viton*
61 90˚ Elbow/Flanged 4 2 Tef-Sil
71 Straight/Victaulic 4 3 Kalrez*
81 Straight/Flanged 4 4 Nitrile*
Use suffix "S" for slotted mounting holes configuration
e.g. VA5142S = 90˚ Elbow/Victaulic, MaxAir air operated internal valve with slotted mounting
holes and Tef-Sil seal

Approximate weights: MaxAir Elbow = 11.20 lbs.; MaxAir Straight = 8.95 lbs
*Please contact Civacon for availability

TM

REAL WORLD. REAL SOLUTIONS.

THAT’S CIVACON.
a division of…

1-149
 1

1-150
1

1-151
 1

VA1050 - 3"Air Operated Emergency Valve

Meet the demand of today’s

fuel delivery tank trucks with
compact, high-performing
Internal Air Operated
Emergency Valves from
Civacon.
The VA1050 3” Emergency Valve is specifically engineered
to allow greater flexibility of tank truck design and assem-
bly. The internal air operation cylinder allows maximum
utilization of under tank chassis space while the “bellowed
body” profile allows higher flow rates when unloading, and
lower pressure drop when at the loading rack.

The VA1050 is purposely designed for fuel oil, lube oil and
heating oil delivery trucks. Civacon, the name to depend
on for innovation and reliable performance.

Features
• 3” TTMA compact elbow design for greater flexibility of tank
truck design
• 3” Victaulic pipe connection for close proximity pipe work
runs
• Internal air cylinder allows for simpler air pipe runs - no exter-
nal linkage
• Pneumatic actuation can be “single acting” or “sequential” to
confirm the position of the valve
• Slotted tank flange to ease installation
• Viton seals for product compatibility
• Air cylinder rated to -40⁰ F to 150⁰ F (-40⁰ C to 66⁰ C)
• External shear groove to TTMA specifications
• Low pressure drop for higher flow rates
• Light weight and robust aluminum and stainless steel con-
struction for long service life
• Quick strip for easy maintenance
• Manual override feature included
• Mesh filter screen is available as an option

1-152
1

VA1050 3” Emergency Valve

3" Air Operated Emergency Valves

PARTS BREAK DOWN

VA1050 - 3" Valve, Air Operated, Victaulic, Viton Seals
VA1051 - 3" Valve, Air Operated. Victaulic, Viton w/Screen
VA2050 - 3" Valve, A.O., Flanged Outlet, Viton Seals
VA2051 - 3" Valve, A.O., Flanged Outlet, Viton w/Screen

ITEM PART NUMBER DESCRIPTION QTY. ITEM PART NUMBER DESCRIPTION QTY.
1 10684 MACHINED BODY 1 14 10344 SEAL WASHER, 1/4” SS 1
2 10819 TOP CAP ASSEMBLY 1 15 10345 RETAIN CLIP 1
3 10810M POPPET SUB-ASSEMBLY 1 16 10346 SPRING, POPPET 1
4 10238M WIPER SEAL 1 17 10347 SPRING, AIR CYLINDER 1
5 10681M O-RING, VITON GF 1 18 10823 GLAND NUT 1
6 10700 O-RING, VITON GF 1 19 1088 NUT, 1/4-20 18-8 1
7 10692 ROD, SS 1 20 9541 SCREW, 1/4-20 x 1 18-8 1
8 10338 WASHER 1 21 9760 PIN, SS 2
9 10339 SCREW, 10-24 x 1/2 18-8 1 22 10746 JACK SCREW 1
10 10683 PISTON 1 23 9052 QUICK EXHAUST 1
11 10676M O-RING, FLUROSILICONE 1 24 9054 BRASS ELBOW 1
12 10719 END CAP 1 25 5047 FUSIBLE PLUG 1
13 10720 O-RING, BUNA-N 1

Rev. +, Jul. 2010

1-153
 1

F7020 & F7021

4" High Flow Emergency Valve, Integral Pneumatic

EMERGENCY VALVE
FEATURES AND BENEFITS

Specifically designed for ease of maintenance, maximum flow and durability. The simplicity of the design makes it ideally
suited to oil companies and transporters of petroleum products who require a tough, reliable, high flow emergency valve.

• Always opens fully.

• Internal air cylinder protected from road spray.
• Air cylinder is internal and is warmed by the product
allowing flawless function in extremely cold weather.
• High quality die cast body and component materials
to international standards are used for durability and
performance.
• Lightweight aluminum construction for increased
payloads.
• External shear groove meets TTMA and DOT 406
requirements to limit product spillage in the event of
an accident.
• Closure by self centering plunger and durable
compression spring.
• Removable bonnet assembly enables seal
change without removing valve from the tank truck.
• Parts common to others valves in our range to
minimize spare parts inventory.
• Manual opening device for emergency discharge
of cargo.
• Hydrodynamic body design and high lift poppet
minimizes pressure drop to give maximum flow rate.
• Sequenced air cylinder option provides for positive
open/closed indication.
• Easy servicing allows the air cylinder piston to be
replaced without removing the valve from the
tank pipework. * Optional screen shown
• Dryline ready for proposed future regulations.
• Buna, Viton® and PTFE Seal variance available.

VARIANTS
PART NO. DESCRIPTION OPERATION SEAL WEIGHT

F7020-201 Elbow Flanged Int. Pneumatic Viton® 10.7 lbs.

F7021-201 Elbow Victualic Int. Pneumatic Viton® 10.4 lbs.

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-154
1
F7020 & F7021

4" High Flow Emergency Valve, Integral Pneumatic

SPECIFICATIONS
ITEM PART NO.
NO. DESCRIPTION QTY. F7020 / 21
1 Body - TTMA flanged 1 670235
1 Body - Victaulic 1 670329
2 Cap 1 619511
3 Poppet 1 619513
4 Seal Disc 1 615992
5 Spring 1 577264
6 Poppet Stem 1 619666
7 Shakeproof Washer 1 619532
8 Nylock Nut, M12 1 618841
9 Seal Holder 1 619667
10 Wiper Seal, Viton® 1 425890
10 Wiper Seal, Buna 1 670411
11 O-ring 2 603653 Viton®
O-ring 2 619249 PTFE
O-ring 2 619523 Buna
12 O-ring 1 422724 Viton®
O-ring 1 619941 PTFE
O-ring 1 670410 Buna
13 Rod 1 619732 28
14 Washer 1 603917
15 Tatite Screw, M5 x 12 1 603846
16 Piston 1 619668
17 O-ring 1 613427 Viton®
O-ring 1 613427 PTFE
O-ring 1 600991 Buna
18 End Cap 1 618898
19 O-ring 1 604552 Viton®
O-ring 1 613427 PTFE
O-ring 1 670409 Buna
20 Retaining Ring 1 618843
21 Hex Screw, M6 x 6 1 308987
22 Bonded Washer 1 410107
23 Conical Spring 1 619819
26 Hex Screw, M6 1 410798
27 Elbow, 6mm x 1/4" 2 825033204
28 Washer 1 429117
• Screen Kit 1 619663
• Poppet Cylinder Seal Kit 1 619756
• Cylinder Seal Kit 1 619757

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-155
 1

1-156
1

1-157
 1

F7000 & F7001

4" High Flow Emergency Valve, Mechanical

EMERGENCY VALVE
FEATURES AND BENEFITS
Specifically designed for ease of maintenance, high flow and durability the simplicity of the design of this valve make it
ideally suited to oil companies and transporters of petroleum products who require a tough, reliable, high flow
emergency valve.

• High quality die cast body and component materials to

international standards are used for durability and
performance.
• Lightweight aluminium construction for increased
payloads.
• Packed gland shaft for easy servicing.
• Plug fitted ready for dryline application.
• All running surfaces are bushed for smoother operation
and longer service.
• High lift poppet for maximum flow.
• Shear groove meets TTMA and NTTC DOT 406 to limit
product spillage in the event of an accident.
• Closure by self centring plunger and durable
compression spring.
• Removable bonnet assembly enables seal change
without removing valve from the tank.
• Stainless steel cam with bearing boot on plunger stem
for smooth operation and extended life.
• Victaulic and TTMA flanged variants available.
• Dryline ready for proposed future regulations.
• Air cylinder kit available.

OVERALL DIMENSIONS

VARIANTS
PART NO. DESCRIPTION WEIGHT

F7000.041 Flanged Elbow Viton® Seal 10.36 lbs

F7000.042 Flanged Elbow PTFE Seal 10.36 lbs
F7000.043 Flanged Elbow Buna Seal 10.36 lbs
F7001.041 Victaulic Elbow Viton® Seal 10.08 lbs
F7001.042 Victaulic Elbow PTFE Seal 10.08 lbs
F7001.043 Victaulic Elbow Buna Seal 10.08 lbs

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-158
1
F7000 & F7001
4" High Flow Emergency Valve, Mechanical
2

16
5
15
3
4
17 11
20
21
22

19

1
6 12
14 7 11

SHAFT DETAIL

10
18 13 8
9
SPECIFICATIONS
Ref Description F7000041 F7001041 Qty

1 Body 670535 670530 1

2 Cap 619511 619511 1
3 Poppet 619513 619513 1
4 Seal Disc 615992 615992 1
5 Spring 577264 577264 1
6 Cam 619516 619516 1
7 Cam Spindle 670557 670557 1
8 Lever 619533 619533 1
9 Gland Nut 670560 670560 1
10 O-Ring Buna 670569 670569 1
11 M12 Nyloc Nut 618841 618841 2
12 Plain Washer 599007 599007 1
13 Packing Support Washer 670561 670561 1
14 Gland Packing 407804 407804 2
15 O-Ring 603653 603653 1
16 Poppet Stem 619514 619514 1
17 Shakeproof Washer 619532 619532 1
18 Retaining Ring 670570 670570 1
19 U - Bolt 452710 452710 1
20 Poppet Stem Boot 619515 619515 1
21 Sealing Ring Nylon 670545 670545 1
22 Blanking Plug 670544 670544 1

printed on recycled paper

As part of a continuous commitment to product development the Company reserve the right to alter the specification of its products without prior notice.

LOADING AND UNLOADING THE WORLD

1-159
 1

F7010 & F7011

4" High Flow Emergency Valve, Mechanical

EMERGENCY VALVE
FEATURES AND BENEFITS

Specifically designed for ease of maintenance, high flow and durability the simplicity of the design of this valve make it
ideally suited to oil companies and transporters of petroleum products who require a tough, reliable, high flow
emergency valve.

• High quality die cast body and component materials to

international standards are used for durability and
performance.
• Lightweight aluminium construction for increased
payloads.
• Packed gland shaft for easy servicing.
• Plug fitted ready for dryline application.
• All running surfaces are bushed for smoother
operation and longer service.
• High lift poppet for maximum flow.
• Shear groove meets TTMA and NTTC DOT 406 to limit
product spillage in the event of an accident.
• Closure by self centring plunger and durable compression
spring.
• Removable bonnet assembly enables seal change
without removing valve from the tank
• Stainless steel cam with bearing boot on plunger
stem for smooth operation and extended life.
• Victaulic and TTMA flanged variants available.
• Dryline ready for proposed future regulations.
• Air cylinder kit available.
8.25" DIA

6" MIN SUMP BORE

VARIANTS
PART NO. DESCRIPTION WEIGHT
5.57"

8 x 0.63" HOLES
F7010.041 Flanged Elbow Viton® Seal 9.35 lbs ON 7.25" PCD

F7010.042 Flanged Elbow PTFE Seal 9.35 lbs

F7010.043 Flanged Elbow Buna Seal 9.35 lbs
FLANGED 5.11"
VICTAULIC 4.99"

F7011.041 Victaulic Elbow Viton® Seal 9.07 lbs

F7011.042 Victaulic Elbow PTFE Seal 9.07 lbs 8 x 0.433" HOLES
ON 5.87" PCD
F7011.043 Victaulic Elbow Buna Seal 9.07 lbs

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-160
1
F7010 & F7011
4" High Flow Emergency Valve, Mechanical
2

16

5
3
15
4
17 11

21
20 22

19

1 6 12
14 7 11

SHAFT DETAIL

10
18 13 8
9

SPECIFICATIONS
Ref Description F7010041 F7011041 Qty

1 Body 670536 670536 1

2 Cap 619511 619511 1
3 Poppet 619513 619513 1
4 Seal Disc 615992 615992 1
5 Spring 577264 577264 1
6 Cam 619516 619516 1
7 Cam Spindle 670557 670557 1
8 Lever 619533 619533 1
9 Gland Nut 670560 670560 1
10 O-Ring Buna 670569 670569 1
11 M12 Nyloc Nut 618841 618841 2
12 Plain Washer 599007 599007 1
3 Packing Support Washer 670561 670561 1
14 Gland Packing 407804 407804 2
5 O-Ring 603653 603653 1
16 Poppet Stem 619514 619514 1
17 Shakeproof Washer 619532 619532 1
18 Retaining Ring 670570 670570 1
19 U - Bolt 452710 452710 1
20 Poppet Stem Boot 619515 619515 1
21 Sealing Ring Nylon 670545 670545 1
22 Blanking Plug 670544 670544 1

printed on recycled paper

As part of a continuous commitment to product development the Company reserve the right to alter the specification of its products without prior notice.

LOADING AND UNLOADING THE WORLD

1-161
 EP-3297 - Air Cylinder Sub-Assembly

1-162
M

Repair kit Parts # 903000202

Kit includes following items #
3, 5,6,8,9,12 &13

Revisions
1
1

1-163
 1
DRAIN SUMPS

DIMENSIONS
No. of
Size Material Wt. Part No. I.D. O.D. B.C. D
Studs
SUMP WITH SOCKETS AND STUDS
Steel 5.2 SU25187MS
Aluminum 2.8 SU25187AL 1 1 9
3” 5 9 /8 6 /4 1 /16 6
Stnls 304 5.2 SU25187SL
Stnls 316 5.2 SU25187SS
Steel 6.5 SU25188MS
Aluminum 3.4 SU25188AL 3 1 9
4” 6 10 /8 7 /4 1 /16 8
Stnls 304 6.5 SU25188SL
Stnls 316 6.5 SU25188SS
Steel 7.8 SU25535MS
Aluminum 5.1 SU25535AL 3 3 1 7
6” 8 /16 12 /4 9 /4 1 /8 12
Stnls 304 7.8 SU25535SL
Stnls 316 7.8 SU25535SS
SUMP WITH WELDED STUDS
Steel SU25388MS
1 1 9
3” Stnls 304 4.3 SU25388SL 5 9 /8 6 /4 1 /16 6
Stnls 316 SU25388SS
Steel SU25389MS
3 1 9
4” Stnls 304 5.3 SU25389SL 6 10 /8 7 /4 1 /16 8
Stnls 316 SU25389SS
Steel SU25505MS
3 3 1 7
6” Stnls 304 6.5 SU25505SL 8 /16 12 /4 9 /4 1 /8 12
Stnls 316 SU25505SS

NOTE: Sump materials are 3/16 Plate Steel or Stainless and 1/4 Aluminum 5454-H32. Full tooling assures accuracy of
dimensions and flatness of surfaces. Bolt Circles in accordance with TTMA recommended standards.

TM

INDUSTRIES, INC. Oct 1990

WARREN, PA.

1-164
1

1-165
 1
Mechanical Operator COMPACT - LUBRICATED

• Compact Design (4) Ø.28 HOLES

• Stainless or Powder Coated Steel

"B"
• 2-3/8” Stroke "C"

10.50
"D"
• Solid Handles "E"
"A" "D"
• Lubricated Stainless Shaft "C"

"B"

6.00 5.00
11.87

9.94

1
4 NPSM THREAD
9.69

2.00

2.25
1.25 1.50

Betts Compact Mechanical Operators function cable operated emergency valves from a central location on a cargo
tank. Available from 1 up to 5 compartments in stainless or powder coated steel; each compartment is supplied with a
fusible link designed to melt at not more than 250°F as well as non-slip cable connectors that allow cable to be cut to
length after installation.

New design is more compact than comparable Universal or Deluxe models. Slotted mounting straps are available as
an option to allow for replacement of Deluxe operators without drilling new mounting holes. Specify straps by adding
suffix “001” to assembly number. Lubricated shaft and handle is standard. Grease fittings on both ends of shaft.

Lever arms provide 2-3/8” stroke and 5.6:1 mechanical advantage. Two trip levers provided for flexibility in locating
cable remote control or for attaching two remotes, if required. See Section 29, Page 1A for cable remote control.
Dim. "A" Dim. “B” Dim. "C" Dim. "D" Dim. "E"
No. of Compts. Material Weight (lb) Part No.
(in.) (in.) (in.) (in.) (in.)
Stainless OP9001SL
1 7.0
Steel Powder Coated OP9001EY
4.20 1.41 N/A .59 2.60
Stainless OP9002SL
2 9.4
Steel Powder Coated OP9002EY
Stainless OP9003SL
3 12.5
Steel Powder Coated OP9003EY
Stainless OP9004SL
4 14.9 7.75 3.19 2.36 1.18 6.15
Steel Powder Coated OP9004EY
Stainless OP9005SL
5 17.3
Steel Powder Coated OP9005EY

Betts
TM

INDUSTRIES, INC. April 2003

WARREN, PA.

1-166
1 PARTS LIST Compact Mechanical Operator
Lubricated
STEEL POWDER COATED STAINLESS STEEL
EMERGENCY TRIP ASSEMBLY EMERGENCY TRIP ASSEMBLY
27 8 7 9 10

13

3
12
3a 3
22
3a

19a

19
19a 19
18 2
14
20
20

11

15 MOUNTING STRAPS
"OPTIONAL"

16

17

Material Part No.

No. Description
Steel Model Stainless Model 1 Compt. 2 Compt. 3 Compt. 4 Compt. 5 Compt.
2 GREASABLE SHAFT 304 SS 27766SL 27715SL
3 EMERGENCY TRIP LEVER ASSEMBLY STEEL PC 304 SS 35659EY-2* / 35686SL-2** 35659EY-5* / 35686SL-5**
7 EMERGENCY CABLE CLAMP BUSHING NA 304 SS 19617SL**
8 EMERGENCY TRIP CABLE CLAMP NA 304 SS 19622SL**
9 1/2 in. SPRING LOCK WASHER NA 304 SS 9Q5908**
10 1/2 -20 JAM NUT NA 304 SS 9Q5909**
11 LINK ARM ASSEMBLY STEEL PC 304 SS 27815EY* / 27815SL**
12 CLEVIS PIN STEEL ZC 304 SS 15757ZC* / 19621SL**
13 3/32 in. x 3/4 in. COTTER PIN BRASS 304 SS 9Q5865* / 9Q5866**
14 FUSIBLE BUSHING NUT BRASS 19724BR
15 5/16 –24 HEX NUT STEEL ZC 304 SS 9Q5808A* / 9Q5858**
16 ADJUSTING BOLT STEEL 303 SS 20040ZC* / S20040A**
17 CLAMPING NUT STEEL ZC 304 SS 10268ZC* / S10268A**
18 HANDLE GRIP - RED/BLUE VINYL -RED VINYL - BLUE 9Z4830* / 9Z4829**
19 GREASE FITTING STEEL 9Z4873
19a THREADED INSERT NA NA 9Z9017
20 RETAINING RING STEEL ZC 304 SS 9Q4974* / 9Q4973**
21cl LEVER ARM ASSEMBLY - LEFT #2 STEEL PC 304 SS NA 35650EYL2* / 35650SLL2**
21bl LEVER ARM ASSEMBLY - LEFT #1 STEEL PC 304 SS NA NA NA NA 35650EYL1*/35650SLL1**
21a LEVER ARM ASSEMBLY – STRAIGHT STEEL PC 304 SS 35650EY*/35650SL** NA 35650EY* / 35650SL**
21br LEVER ARM ASSEMBLY - RIGHT #1 STEEL PC 304 SS NA NA NA NA 35650EYR1*/35650SLR1**
21cr LEVER ARM ASSEMBLY - RIGHT #2 STEEL PC 304 SS NA 35650EYR2* / 35650SLR2**
22 REPLACEMENT BUSHING STEEL PC 304 SS 19624EY*/ 9624SL** NA 19624EY* / 19624SL** NA
27 CABLE CLAMP STEEL ZC NA 9Q1660*
“EY” FOR STEEL POWDER COATED GLOSS BLACK , “SL” FOR STAINLESS, “ZC” STEEL ZINC COATED.

* PARTS FOR STEEL POWDER COATED GLOSS BLACK MODELS ONLY

** PARTS FOR STAINLESS MODELS ONLY

WARNING Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitute parts can impair the
proper function of this product.
Note: Adjusting Bolt assembly 20040A001 and S20040A001 includes items 14,15,16,17.

Betts INDUSTRIES, INC.

WARREN, PA.
Feb 2003

1-167
 1
Mechanical Operator COMPACT - DELTA I - LUBRICATED

Automatically Energizes Air Vents

(4) Ø.28 HOLES
•

• Compact Design "B"

"C"

Stainless or Powder Coated Steel

10.50
"D"
• "E"
"A" "D"
• 2-3/8” Stroke "C"

"B"

• Solid Handles

• Lubricated Stainless Shaft 1

4 NPSM THREAD 6.00 5.00
11.87

9.94
9.69
2.00

.25 2.25
1.25

Betts Compact Mechanical Operators function cable operated emergency valves from a central location on a cargo
tank. Provision is made for mounting 3-way air valve (part no. 20761) on side of operator. Air valve is actuated when
any compartment is opened, thereby assuring that air vents are energized when any emergency valve is opened. Air
valve is not included. Add suffix “003” to include air valve. Available from 1 up to 5 compartments in stainless or
powder coated steel; each compartment is supplied with a fusible link designed to melt at not more than 250°F as well
as non-slip cable connectors that allow cable to be cut to length after installation.

New design is more compact than comparable Universal or Deluxe models. Slotted mounting straps are available as
an option to allow for replacement of Deluxe operators without drilling new mounting holes. Specify straps by adding
suffix “001” to assembly number. Other mounting options available by contacting sales. Lubricated shaft and handle is
standard. Grease fittings on both ends of shaft.

Lever arms provide 2-3/8” stroke and 5.6:1 mechanical advantage. Two trip levers provided for flexibility in locating
cable remote control or for attaching two remotes, if required. See Section 29, Page 1A for cable remote control.
Dim. "A" Dim. “B” Dim. "C" Dim. "D" Dim. "E"
No. of Compts. Material Weight (lb) Part No.
(in.) (in.) (in.) (in.) (in.)
Stainless OP9101SL
1 9.8
Steel Powder Coated OP9101EY
4.20 1.41 N/A .59 2.60
Stainless OP9102SL
2 12.2
Steel Powder Coated OP9102EY
Stainless OP9103SL
3 15.8
Steel Powder Coated OP9103EY
Stainless OP9104SL
4 18.2 7.75 3.19 2.36 1.18 6.15
Steel Powder Coated OP9104EY
Stainless OP9105SL
5 20.6
Steel Powder Coated OP9105EY

Betts
TM

INDUSTRIES, INC. April 2003

WARREN, PA.

1-168
1 PARTS LIST Compact Mechanical Operator
Delta I - Lubricated
STEEL POWDER COATED STAINLESS STEEL
EMERGENCY TRIP ASSEMBLY EMERGENCY TRIP ASSEMBLY
27 8 7 9 10
13

12
3
3a 3
22
3a

2 19
19a

19
19a
18 14
20 20

3-WAY AIR VALVE WITH

11
SPANNER LOCK NUT
MOUNTING STRAPS 20761 "OPTIONAL"
15
"OPTIONAL"

16

17

23
28
25

26
23 26 24 26

No. Description Material Part No.

SteelStainless Model 1 Compt. 2 Compt. 3 Compt. 4 Compt. 5 Compt.
2 SHAFT 304 SS 277766SL 27715SL
3 EMERGENCY TRIP LEVER ASSEMBLY STEEL 304 SS 35659EY-2* / 35686SL-2** 35659EY-5* / 35686SL-5**
3a FLANGED BUSHING NA NA 9V4255
7 EMERGENCY CABLE CLAMP BUSHING NA 304 SS 19617SL**
8 EMERGENCY TRIP CABLE CLAMP NA 304 SS 19622SL**
9 1/2 in. SPRING LOCK WASHER STEEL 304 SS 9Q5899* / 9Q5908**
10 1/2 -20 JAM NUT STEEL 304 SS 9Q5910* / 9Q5909**
11 LINK ARM ASSEMBLY STEEL 304 SS 27815EY* / 27815SL**
12 CLEVIS PIN STEEL 304 SS 15757ZC* / 19621SL**
13 3/32 in. x 3/4 in. COTTER PIN BRASS 304 SS 9Q5865* / 9Q5866**
14 FUSIBLE BUSHING NUT BRASS 19724BR
15 5/16 –24 HEX NUT STEEL 304 SS 9Q5808A* / 9Q5858**
16 ADJUSTING BOLT STEEL 303 SS 20040ZC* / S20040A**
17 CLAMPING NUT STEEL 304 SS 10268ZC* / S10268A**
18 HANDLE GRIP - RED/BLUE VINYL - VINYL - BLUE 9Z4830* / 9Z4829**
19 GREASE FITTING STEEL 9Z4873
19a THREADED INSERT NA 9Z9017
20 RETAINING RING STEEL ZC 9Q4974* / 9Q4974**
21cl LEVER ARM ASSEMBLY - LEFT #2 STEEL 304 SS NA 35650EYL2* / 35650SLL2**
21bl LEVER ARM ASSEMBLY - LEFT #1 STEEL 304 SS NA NA NA NA 35650EYL1* / 35650SLL1**
21a LEVER ARM ASSEMBLY –STRAIGHT STEEL 304 SS 35650EY* / 35650SL** NA 35650EY* / 35650SL**
21br LEVER ARM ASSEMBLY - RIGHT #1 STEEL 304 SS NA NA NA NA 35650EYR1* / 35650SLR1**
21cr LEVER ARM ASSEMBLY - RIGHT #2 STEEL 304 SS NA 35650EYR2* / 35650SLR2**
22 REPLACEMENT BUSHING STEEL 304 SS 19624EY* / 19624SL** NA 19624EY* / 19624SL** NA
23 BUSHING BRONZE 9Z4869
24 SHAFT & GATE ASSEMBLY STEEL 304 SS 27811ZC* / 27811SL** 27812ZC* / 27812SL**
25 CAM STEEL ZC 10938ZC
26 ROLL PIN 1/8 x 7/8 STEEL 420 SS 9Q5894* / 9Q5920**
27 CABLE CLAMP STEEL NA 9Q1660*
28 CABLE BUSHING & SET SCREW STEEL ZC 10942
“EY” FOR STEEL POWDER COATED GLOSS BLACK , “SL” FOR STAINLESS, “ZC” STEEL ZINC COATED.
* PARTS FOR STEEL POWDER COATED GLOSS BLACK MODELS ONLY
** PARTS FOR STAINLESS MODELS ONLY

WARNING Use only genuine BETTS INDUSTRIES INC. replacement parts. Use of substitute parts can impair the
proper function of this product.
Note: Adjusting Bolt assembly 20040A001 and S20040A001 includes items 14,15,16,17.

Betts INDUSTRIES, INC.

WARREN, PA. Feb 2003

1-169
 1

1-170
1

1-171
 1
PARTS LIST Gate Valves

3 1 2 1

4 5
4 5
6
7 6
7

3” Gate Valve

4” Gate Valve

NO. REQ. DESCRIPTION MATERIAL PART NO.

1 1 7/16-14 hex Nut Steel 9Q5811

2 1 3” Hand Wheel Aluminum 25186AL
3 1 4” Hand Wheel Aluminum 25245AL
Anodized Aluminum 15026AL
4 1 Stuffing Box Nut
Stainless Steel 15026SS
5 1 Gland Follower Stainless Steel 15220SS
6 1 Packing Set (3 Rings per Set) Teflon Suspensoid 15227NT
7 1 Gland Washer Stainless Steel 15076SS
8 2 * Seat O-Ring (4” valve only) Tef-Sil 19430TS
* Replaceable Seat Valves only.

Oct 1998
TM

INDUSTRIES, INC.
WARREN, PA.

1-172
1

1-173
 1
Wet-R-Dri Valves / Standard & Detent TTMA STYLE

LIGHTWEIGHT

COMPACT

VERSATILE

I.D.

O.D.

Standard Model Detent Model Standard Material Max. Working Temperature

Size Wt. Wt.
Assembly No. Assembly No. Body Disc Pressure Range
WD200 AL B 2.4 WD201 AL B 2.4 Aluminum
2” Buna-N 75 PSI
WD200 GI B 4.6 WD201 GI B 4.6 Grey Iron

See Chart Below

WD300 AL B 3.6 WD301 AL B 3.6 Aluminum
3” Buna-N 75 PSI
WD300 GI B 6.9 WD301 GI B 6.9 Grey Iron
WD400 AL V 4.5 WD401 AL V 4.5 Aluminum
4” Viton 75 PSI
WD400 GI V 8.3 WD401 GI V 8.3 Grey Iron
5” WD500 AL V 7.9 WD501 AL V 7.9 Aluminum Viton 50 PSI
6” WD600 AL U 11.8 WD601 AL U 11.8 Aluminum Urethane 50 PSI
8” WD800 AL U 17.3 WD801 AL U 17.3 Aluminum Urethane 50 PSI
NOTE: Standard drilling fits TTMA recommended standards.
Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and
bearing shafts, and “E” Coating of aluminum valves (recommended for aluminum valves used in water service).
For repair kit, see Section 20, Page 5B.

Dimensions Suffix for Disc Material

Buna-N Urethane
Size A B C I.D. O.D. B.C. Holes Viton EPDM
Black White Black White
3 1 1 1 3 3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B WB V U WU E
3 5 1 3 5 7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F -40°F -0°F -40°F -40°F -50°F
3 1 1 3 5 7 7
4” 6 /4 5 /8 1 /8 4 /8 6 /8 5 /8 8- /16 +200°F +200°F +400°F +200°F +200°F +300°F
3 3 1 7 5 7
5” 6 /4 6 /8 2 /8 5 /16 7 /8 7 12- /16 NOTE: Temperature ranges based on
1 1 5 1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published information and may vary
1 7 1 7
8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to actual operating conditions.
INSTALLATION:
The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by
1
turning handle /4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please
specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow
disc of valve to open freely. We suggest using our accompanying flanges and adapters shown in later sections of our catalog.
TM

INDUSTRIES, INC. Feb 1995

WARREN, PA.

1-174
1 PARTS LIST
Wet-R-Dri Valves S
Wet-R-Dri VALVE / Standard
A

2 LIGHTWEIGHT 2

COMPACT
6
4 5
VERSATILE 6

10
12
11

9 WD101-3 BU
1 9 WD101-3 BU
1
92 92

7 7
8 8

Standard Model Detent Model Stand

Size Wt. Wt.
Assembly No. Assembly No. Body
STANDARD MODEL WD200
DETENT AL B MODEL 2.4 WD201 AL B 2.4 Aluminum
2”
WD200 GI B 4.6 WD201 GI B 4.6 Grey Iron
WD300 AL B 3.6 WD301 AL B 3.6 Aluminum
3”
WD300 GI B 6.9 WD301 GI B 6.9 Grey Iron
WD400 AL V 4.5 WD401 AL V 4.5 Aluminum
4”
2” Size 3” Size 4” Size WD400 5” Size
GI V 6” Size WD4018”
8.3 GISize
V 8.3 Grey Iron
No. Description Material
Part No. Part No. Part
5” No. WD500 PartAL
No. V Part No.WD501Part
7.9 No. 7.9
AL V Aluminum
Buna-N WD101-2 BN WD101-3 BN WD101-4
6” BN WD600 WD101-5
AL BNU WD101-6
11.8 BN WD601WD101-8
AL U BN 11.8 Aluminum
Viton WD101-2 VT WD101-3 VT WD101-4
8” VT WD101-5
WD800 AL U VT WD101-6
17.3 VT
WD801 AL U VT 17.3 Aluminum
WD101-8
1 Disc
Urethane WD101-2 PY WD101-3 PY WD101-4 PY WD101-5 PY WD101-6 PY WD101-8 PY
EPDM WD101-2 EP WD101-3 EP NOTE: EP
WD101-4 Standard drilling
WD101-5 EP fits WD101-6
TTMA recommended
EP WD101-8standards.
EP
Valves are available with the following options: Stainless steel liners and
Handle Mall. “E” Coated 25884EY 25884EY 25884EY 25884EY 25933AL 25933AL
bearing shafts, and “E” Coating of aluminum valves (recommended for a
2 Cap Screw Steel Zinc Plt. 9Q5813 9Q5813 9Q5813
For repair kit,9Q5813
see Section 20, 9Q5898
Page 5B. 9Q5898
Hex. Nut Steel Zinc Plt. 9Q5808 9Q5808 9Q5808 9Q5808 9Q5808 9Q5808
4 Drive Shaft Steel 27053MS 27050MS 27050MS 27051MS 16229MS 16229MS002
5 Drive Shaft Steel 27053MS001 27050MS001 27050MS001 27051MS001 Dimensions
16229MS 16229MS002
6 O-Ring To Match Disc Mat’l. 17889** 17889** 17889** B
Size A 17889**B C 18831**
I.D. 18831**
O.D. B.C. Holes
Black
7 Bearing Shaft Steel 16006MS 15913MS 15913MS 3 15913MS 1 1 16230MS
1 3 16230MS002
3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B
8 O-Ring To Match Disc Mat’l. 17781** 18141** 18141** 3 18141**5 1 18831**
3 5 18831**
7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F
9 Driv-Lok-Pin Steel Zinc Plt. 9Q4893 9Q4893 9Q4893 3 9Q4925 1 1 9Q49263 5 9Q49387 7
4” 6 /4 5 /8 1 /8 4 /8 6 /8 5 /8 8- /16 +200°F
10 Detent Ball 440 Stnls 9Z4856 9Z4856 9Z4856 3 9Z4856 3 1 9Z48567 5 9Z4856 7
5” 6 /4 6 /8 2 /8 5 /16 7 /8 7 12- /16 NOTE
11 Detent Spring 304 Stnls 15229SL 15229SL 15229SL 15229SL 1 15229SL
1 5 15229SL
1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 publis
12 Ret. Screw 304 Stnls 9Q5838 9Q5838 9Q5838 9Q5838 1 9Q5838 79Q58381 7
due to
8” 12 8 2 /2 8 10 /8 10 /8 16- /16
** O-Ring material suffix to match Disc suffix (i.e.-17889VT)
INSTALLATION:
The Wet-R-Dri Valve may be mounted in any position with handle located
1
turning handle /4 turn counter clockwise (right hand operation). If clockwis
WARNING Use only genuine Betts Industries Inc. replacement parts. Use of substitute
specify. Care should parts when
be taken can impair the proper
mounting valve to be sure the I.D. of
functioning of the Wet-R-Dri Valve. disc of valve to open freely. We suggest using our accompanying flanges
TM

TM
INDUSTRIES, INC.
INDUSTRIES, INC.
WARREN, PA.
Jan 1993
WARREN, PA.

1-175
 1
VALVE
Wet-R-Dri Valve sS / LOCKING
/ Standard & Detent
& METERING
TTMASTYLE
TTMA STYLE

LIGHTWEIGHT
LIGHTWEIGHT

COMPACT
COMPACT

VERSATILE
VERSATILE

I.D.

The Betts Wet-R-Dri Valve is designed for handling liquid, gaseous or dry products, and is available in a variety of sizes and
models. This space saving valve is lightweight, easily maintained, and has a positive stop in the open and closed position.
The Locking model has a 2 notch indexing plate which locks disc in the open or closed positions.
The Metering model has a 10 notch indexing plate which allows disc to be positioned in 10 various positions.

Locking Model Metering Model Standard Material

O.D. Max. Working Temperature
Size Wt. Wt.
Assembly No. Assembly No. Body Disc Pressure Range
Standard
WD202 AL Model
B 3.3 Detent AL
WD204 Model
B 3.1 Standard Material
Aluminum Max. Working Temperature
Size
2” Wt. Wt. Buna-N 75 PSI
Assembly
WD202 GINo. B 5.5 Assembly
WD204 GINo. B 5.3 Body
Grey Iron Disc Pressure Range

BelowBelow
WD200 AL
WD302 AL BB 2.4
4.5 WD201AL
WD304 ALBB 2.4
4.3 Aluminum
2”
3” Buna-N 75 PSI
WD200 GI
WD302 GI BB 4.6
7.8 WD201GI
WD304 GIBB 4.6
7.6 Grey Iron
WD300 AL AL VB 3.6 WD301AL ALVB 3.6 Aluminum

See Chart
3” WD402 5.4 WD404 5.2 Buna-N 75 PSI
4” Viton
WD300 GI
WD402 GI VB 6.9
9.2 WD301GI
WD404 GIVB 6.9
9.0 Grey Iron

See Chart
5” WD400 AL
WD502 AL VV 4.5
8.8 WD401AL
WD504 ALVV 4.5
8.6 Aluminum Viton 50 PSI
PSI
4” Viton 75
6” WD400
WD602 AL U GI V 8.3
12.4 WD401
WD604 AL U GI V 8.3 Grey
12.2 Aluminum UrethaneIron 50 PSI
5”
8” WD500AL
WD802 ALUV 7.9
17.9 WD501AL
WD804 ALUV 7.9
17.7 Aluminum
Aluminum Viton Urethane 50
50 PSI
PSI
6” WD600 AL U 11.8 WD601 AL U 11.8 Aluminum Urethane 50 PSI
NOTES:
8” Standard
WD800 AL drilling
U fits17.3 TTMA recommended
WD801 AL U standards. 17.3 Aluminum Urethane 50 PSI
Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and
NOTE:
bearingStandard
shafts, and drilling fits TTMA
“E” Coating recommended
of aluminum valvesstandards.
(recommended for aluminum valves used in water service).
Valves are available with the
For repair kit, see Section 20, Page 5B. following options: Stainless steel liners and shafts, grease fittings installed in the drive and
bearing shafts, and “E” Coating of aluminum valves (recommended for aluminum valves used in water service).
For repair kit, see Section 20, Page 5B.
Dimensions Suffix for Disc Material
Buna-N Urethane
Size A B C I.D. O.D. B.C. Holes Viton EPDM
Dimensions Black White Suffix for Disc BlackMaterialWhite
1 1 1 1 3 3 7
2” 10 /8 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B Buna-NWB V UUrethane WU E
Size A1 B5 C1 I.D.
3 O.D.5 B.C.
7 Holes
7 Viton EPDM
3” 10 /8 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 Black
-40°F White
-40°F -0°F Black
-40°F White
-40°F -50°F
3 1 1 1 3 3 77
2”
4” 6 /14/8 451//48
10 111//88 243//48 365/48 357/48 6- 8- /16 B
+200°F WB
+200°F V
+400°F U
+200°F WU
+200°F E
+300°F
31 53 11 73 55 7 77
3”
5” 6 /4/8 46 //88
10 12 //88 53 /168 57 /88 4 7/8 8-
12-//16 16 -40°F Temperature
NOTE: -40°F -0°F -40°F on -40°F
ranges based -50°F
3 1 1 3 5 7 77
4”
6” 612/4 5 7/8 121//88 461//88 685/88 581/88 8- 12-//16 16 +200°F
published +200°F
information +400°F
and may +200°F
vary +200°F +300°F
3 3 1 7 5 77
5”
8” 612/4 6 8/8 221//82 5 8/16 7 /78/8 1071/8 12-
10 16- /16 16
due to actual
NOTE: operating
Temperature conditions.
ranges based on
1 1 5 1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published information and may vary
1 7 1 7
8”
INSTALLATION:12 8 2 /2 8 10 /8 10 /8 16- /16 due to actual operating conditions.
The Wet-R-Dri
INSTALLATION: Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by
1
The Wet-R-Dri Valve may be mounted in any position with handle located forrotation
turning handle /4 turn counter clockwise (right hand operation). If clockwise is desiredValve,
easy operation. (left hand operation) please
as assembled, opens by
specify. Care should
1 be taken when mounting valve to be sure the I.D. of adjoining
turning handle /4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) flanges or pipe is large enough toplease
allow
disc of valve
specify. Care to open be
should freely.
taken We suggest
when using valve
mounting our accompanying
to be sure theflanges and adapters
I.D. of adjoining shown
flanges laterisinlarge
or pipe enough. to allow
our catalog
disc of valve to open freely. We suggest using our accompanying flanges and adapters shown in later sections of our catalog.
TM
TM

INDUSTRIES, INC.
INDUSTRIES, INC. Feb
Feb 1995
1995
WARREN, PA.
WARREN, PA.

1-176
1 PARTS LIST
ValvesS/ Standard &
Wet-R-Dri VALVE
A
2a 2
LIGHTWEIGHT
4a 4
COMPACT
5 5

VERSATILE

8 8
6 6

I.D

11 WD101-3 BU
1 11 WD101-3 BU
1
92 92

9 9
10 10

LOCKING MODEL METERING MODEL

Standard Model Detent Model Standard
Size Wt. Wt.
2” Size 3” Size Assembly
4” Size No.
5” Size Assembly
6” Size No.
8” Size Body
No. Description Material
Part No. Part No. 2” Part WD200
No. ALPart
B No. 2.4 Part WD201
No. AL Part
B No. 2.4 Aluminum
B
Buna-N WD200 GI B 4.6
WD101-2 BN WD101-3 BN WD101-4 BN WD101-5 BN WD101-6 BN WD101-8 BN WD201 GI B 4.6 Grey Iron
Viton WD101-2 VT WD101-3 VT 3” WD101-4 WD300 AL B
VT WD101-5 VT3.6 WD101-6
WD301VT AL B
WD101-8 3.6
VT Aluminum
1 Disc B
Urethane WD300 GI B 6.9
WD101-2 PY WD101-3 PY WD101-4 PY WD101-5 PY WD101-6 PY WD101-8 PY WD301 GI B 6.9 Grey Iron
EPDM WD101-2 EP WD101-3 EP 4” WD101-4 WD400 AL V
EP WD101-5 EP4.5 WD101-6
WD401EP AL V
WD101-8 4.5
EP Aluminum
V
2 Handle Assy. Alum. “E” Coated 26284AL 26284AL WD400
26284AL GI V
26284AL 8.3 WD401
26287AL GI V
26287AL 8.3 Grey Iron
Handle Assy. Alum. “E” Coated 26075AL 26075AL 5” 26075AL WD500 26075AL
AL V 7.9 26077AL
WD501 AL V
26077AL 7.9 Aluminum V
Handle/Grip Alum. “E” Coated 25815ALEY 25815ALEY 6” 25815ALEY WD600 25815ALEY
AL U 11.825802ALEY
WD601 AL 25802ALEY
U 11.8 Aluminum U
Spring 302 Stnls 16365SL 16365SL 8” 16365SL WD800 16365SL
AL U 17.316365SL
WD801 AL 16365SL
U 17.3 Aluminum U
Plunger-Metering Steel 16969MS 16969MS 16969MS 16969MS 17020MS 17020MS
2a NOTE: Standard drilling fits TTMA recommended standards.
Plunger-Locking Steel 16385MS 16385MS 16385MS 16385MS 16400MS 16400MS
Valves are available with the following options: Stainless steel liners and sha
Chain Link Steel 9Z4915 9Z4915 bearing 9Z4915 9Z4915 9Z4915
shafts, and “E” Coating of aluminum valves 9Z4915(recommended for alum
Cap Screw Alum. Or Steel 9Q5897 9Q5897 For repair
9Q5897 9Q589720, Page
kit, see Section 9Q5898
5B. 9Q5898
Hex. Nut Steel Zinc Plt. 9Q5808 9Q5808 9Q5808 9Q5808 9Q5808 9Q5808
4 Indexing Plate Steel “E” Coated 17012EY 17012EY 17012EY 17012EY 17016EY 17016EY
Dimensions
4a Indexing Plate Steel “E” Coated 16358EY 16358EY 16358EY 16358EY 16668EY 16668EY
Buna-
5 Cap Screw Stainless 9Q5884 9Q5884 Size9Q5884 A B9Q5884C I.D.
9Q5884O.D. 9Q5884
B.C. Holes
Black
6 Drive Shaft Steel 27053MS 27050MS 27050MS
3 127051MS 1 16229MS
1 3 16229MS002
3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B
8 O-Ring To Match Disc Mat’l. 17889** 17889** 17889**
3 517889**1 18831**
3 5 18831**
7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F
9 Bearing Shaft Steel 16006MS 15913MS 15913MS
3 115913MS 1 16230MS
3 5 16230MS
7 7
4” 6 /4 5 /8 1 /8 4 /8 6 /8 5 /8 8- /16 +200°F
10 O-Ring To Match Disc Mat’l. 17781** 18141** 18141**
3 318141**1 18831**
7 5 18831** 7
5” 6/ 6 /8 2/ 5 /16 7 /8 7 12- /16 NOTE: Te
11 Driv-Lok-Pin Steel Zinc Plt. 9Q4893 9Q4893 9Q48934 9Q49251 8 9Q4926
1 5 9Q4938
1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published
1 7 1 7
** O-Ring material suffix to match Disc suffix (i.e.-17889VT) 8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to actu
INSTALLATION:
WARNING Use only genuine Betts Industries Inc. replacement
Theparts. Use ofValve
Wet-R-Dri substitute
may beparts can impair
mounted theposition
in any proper with handle located for e
1
functioning of this product. turning handle /4 turn counter clockwise (right hand operation). If clockwise rot
specify. Care should be taken when mounting valve to be sure the I.D. of adjoi
TM disc of valve to open freely. We suggest using our accompanying flanges and a
INDUSTRIES, INC.
WARREN, PA.
TM April 2002
INDUSTRIES, INC.
WARREN, PA.

1-177
 1
VALVE
Wet-R-Dri Valve sS
/ /
LOCKING SPRING LOADED
Standard & LOADED
& SPRING Detent TTMA STYLE
TTMA STYLE
A

LIGHTWEIGHT
LIGHTWEIGHT
COMPACT
COMPACT
VERSATILE
VERSATILE
B

I.D.

O.D.
The Betts Wet-R-Dri Valve is designed for handling liquid, gaseous or dry products, and is available in a variety of sizes and
models. ThisStandardspaceModel Detent Model
saving valve is lightweight, easily maintained, and Standard Materialstop in Max.
has a positive Working
the open Temperature
and closed position.
Size Wt. Wt.
Both spring loaded valves
Assembly No. provide anAssembly immediateNo. and positive shutBody off. The locking type permits
Disc Pressure Range held
valve to be mechanically
open whileWD200 the spring AL B loaded type2.4 canWD201 be usedAL forBremote 2.4operation Aluminumor as a dead man valve.
2” Buna-N 75 PSI
WD200 GI B 4.6 WD201 GI B 4.6 Grey Iron
Locking-Spring Loaded Spring Loaded Standard Material Max. Working Temperature

Chart Below
Size WD300 AL B Wt. WD301 AL B
3.6 Wt. Aluminum
3.6
3” Assembly No. Assembly No. Body Buna-N
Disc Pressure
75 PSI Range
WD300 GI B 6.9 WD301 GI B 6.9 Grey Iron
WD203 AL B 5.5 WD205 AL B 4.4 Aluminum
2” Buna-N 75 PSI

SeeBelow
WD400 AL V 4.5 WD401 AL V 4.5 Aluminum
4” WD203 GI B 7.7 WD205 GI B 6.6 Grey Iron Viton 75 PSI
WD400 GI V 8.3 WD401 GI V 8.3 Grey Iron
WD303 AL B 6.7 WD305 AL B 5.6 Aluminum
3”
5” WD500 AL V 7.9 WD501 AL V 7.9 Aluminum Viton Buna-N 75 PSI
50

See Chart
WD303 GI B 10.0 WD305 GI B 8.9 Grey Iron
6” WD600
WD403 AL V AL U 11.8
7.6 WD601 AL
WD405 AL V U 11.8
6.5 Aluminum
Aluminum Urethane 50 PSI
4”
8” WD800 Viton 75 PSI
WD403AL GIUV 17.3
11.4 WD801 WD405AL GIUV 17.3 10.3 Aluminum Grey Iron Urethane 50 PSI
5” Standard
NOTE: WD503 AL Vfits TTMA
drilling 11.0recommended
WD505 AL standards.
V 9.9 Aluminum Viton 50 PSI
Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and
NOTES:shafts,
bearing Standard anddrilling fits TTMA
“E” Coating recommended
of aluminum valvesstandards.
(recommended for aluminum valves used in water service).
Valves
For arekit,
repair available
see Section with the20,following
Page [Link]: Stainless steel liners and shafts, grease fittings installed in the drive and
bearing shafts, and “E” Coating of aluminum valves (recommended for aluminum valves used in water service).
For repair kit, see Section 20, Page 5B.
Dimensions Suffix for Disc Material
Dimensions Buna-N Suffix Urethane
for Disc Material
Size A B C I.D. O.D. B.C. Holes Viton EPDM
Black Buna-NWhite BlackUrethaneWhite
Size A3 A11 B1 C 1 I.D. 3 O.D. 3 B.C. 7Holes Viton EPDM
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 BBlack WB White V U
Black WU
White E
33 15 1 1 3 1 5 3 7 3 7 7
2”
3” 6 /
6 /44 10 /
4 8/8 6 1 /8 1 /83 /8 2 /4 5 /83 / 3 / 6-
4 4 /8 4 8- /16 16 / -40°F B WB
-40°F -0°FV U
-40°F WU
-40°F E
-50°F
3 1 1 1 1 3 5 7 7
3”
4” 663//44 1051/8/8 6 1 /4 /8 1 /843/8 3 /8 65/85 /8 57/84 /8 8-78- / 16
/16 -40°F +200°F
+200°F -40°F +400°F
-40°F +200°F-40°F +200°F-40°F -40°F
+300°F
3 1 3 1 3 5 7 7
4”
5” 663//4 1063/8/ 6 2 /41/ 1 /58 7/ 4 /8 75/ 6 /8 7 5 /8 12-78- /16 7/16 NOTE: +200°F +200°F +200°F +200°F +200°F +200°F
3 4 1 8 8 1 16 7 8 5 Temperature ranges based on
5”
6” 612/ 4 10 /
7 8 8 1
2 /8 2 /8 1 5 /16 5 7 /8 1 7
6 /8 8 /8 8 /8 12-
7
12- /16 / 16 NOTE: Temperature ranges based on
published information and may vary
1 7 1 7 published information and may vary
8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to actual operating conditions.
due to actual operating conditions.
INSTALLATION:
INSTALLATION:
The
TheWet-R-Dri
Wet-R-DriValve Valvemay maybe bemounted
mountedininany anyposition
positionwithwithhandle
handlelocated locatedfor foreasy
easyoperation.
[Link],
Valve,as as assembled,
assembled, opens
opens byby
1 1
turning handle/4 /turn
turninghandle 4 turn counter
counterclockwise
clockwise(right(righthand
handoperation).
operation).IfIfclockwise
clockwiserotation
rotationisisdesired
desired (left
(left hand
hand operation)
operation) please
specify.
[Link]
Careshouldshouldbebetaken takenwhenwhenmounting
mountingvalvevalvetotobe besure
surethe [Link]
adjoiningflanges
flanges oror pipe
pipe isis large
large enough
enough to allow
disc
discofofvalve
valvetotoopen openfreely.
[Link] Wesuggest
suggestusing usingour
ouraccompanying
accompanyingflanges flangesand andadapters
adaptersshown
shown in later
later in sections of .our catalog.
our catalog
TM
TM

INDUSTRIES, INC. Feb1992

Apr 1995
INDUSTRIES,
WARREN, PA. INC.
WARREN, PA.

1-178
1
PARTS LIST Valves S
Wet-R-Dri VALVE / Standard
2a A
2

4 4
LIGHTWEIGHT
5a 5

COMPACT
10 10

8
VERSATILE
8
11 9 11 9
9 9
12 12
7 7
6 6
13 13

14 15 15
14

19 19

92
WD101-3 BU
1 92
WD101-3 BU
1

18 18

16 16
17 17

LOCKING TYPE SPRING LOADED MODEL Standard Model Detent Model Standar
Size SPRING LOADED MODEL Wt. Wt.
Assembly No. Assembly No. Body
2” Size 3” Size 4” Size 5” Size
No. Description Material WD200 AL B 2.4 WD201 AL B 2.4 Aluminum
Part No. 2” Part No. Part No. Part No.
Buna-N WD101-2 BN
WD200
WD101-3 BN
GI B 4.6
WD101-4 BN
WD201 GI B
WD101-5 BN
4.6 Grey Iron
Viton WD300
WD101-2 VT 3” WD101-3 VTAL B WD101-4
3.6 VT WD301 AL B VT 3.6
WD101-5 Aluminum
1 Disc WD300 GI B 6.9 WD301 GI B PY 6.9 Grey Iron
Urethane WD101-2 PY WD101-3 PY WD101-4 PY WD101-5
EPDM WD101-2 EP WD400
WD101-3 EPAL V WD101-4
4.5 EP WD401 AL V EP 4.5
WD101-5 Aluminum
4”
2 Handle Mall. “E” Coated 25884EY WD400 GI V 25884EY
25884EY 8.3 WD401 GI V
25884EY 8.3 Grey Iron
2a Handle Assy. Alum. “E” Coated 26075AL 5” 26075AL
WD500 AL V 26075AL
7.9 WD501 AL V
26075AL 7.9 Aluminum
4 Screws Stainless 9Q5837 6” 9Q5837
WD600 AL U 9Q583711.8 9Q5837
WD601 AL U 11.8 Aluminum
5 Cover Plate Aluminum 16929AL 8” 16929AL
WD800 AL U 16929AL
17.3 16929AL
WD801 AL U 17.3 Aluminum
5a Cover Plate Steel 16961MS 16961MS 16961MS 16961MS
NOTE: Standard drilling fits TTMA recommended standards.
6 Gasket Cork-Neoprene 17427CN
Valves 17427CN
are available with17427CN 17427CN
the following options: Stainless steel liners and s
7 Cap Screw Steel 9Q5848 9Q5848 9Q5848
bearing shafts, and “E” Coating of aluminum 9Q5848
valves (recommended for alu
8 Spring Adapter 304 Stainless 16934SL For repair kit, see Section
16934SL 20, Page 5B. 16934SL
16934SL
9 Washer Teflon 17418TF 17418TF 17418TF 17418TF
10 Spring Steel “E” Coated 16945EY 16945EY 16945EY
Dimensions 16945EY
11 O-Ring Buna-N 18831BN 18831BN 18831BN 18831BN Bun
Size A B C I.D. O.D. B.C. Holes
12 Stop Plate 304 Stainless 16928SL 16928SL 16928SL 16928SL Black
3 1 1 1 3 3 7
13 Housing Aluminum 26190AL 2” 6 /4
26190AL 4 /4 1 /8
26190AL2 /4 3 26190AL
/4 3 /4 6- /16 B
3 5 1 3 5 7 7
14 Drive Shaft Steel 27053MS 3” 6 /4
27050MS 4 /8 1 /8 3 /8
27050MS 5 27051MS
/8 4 /8 8- /16 -40°F
3 1 1 3 5 7 7
15 O-Ring To Match Disc Mat’l. 17889** 4” 6 /4
17889** 5 /8 1 /8
17889** 4 /8 6 17889**
/8 5 /8 8- /16 +200°F
3 3 1 7 5 7
16 Bearing Shaft Steel 16006MS 5” 15913MS 6 /8
6 /4 2 /8 5 /16
15913MS 7 15913MS
/8 7 12- /16 NOTE: T
1 1 5 1 7
6” 12 7 2/8 6 /8 8 /8 8 /8 12- /16 publishe
17 O-Ring To Match Disc Mat’l. 17781** 18141** 18141**
1 718141** 1 7
8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to a
18 Driv-Lok-Pin Steel Zinc Plt. 9Q4893 9Q4893 9Q4893 9Q4925
19 Gasket Cork-Neoprene 18308CNINSTALLATION:
18308CN 18308CN 18308CN
The Wet-R-Dri Valve may be mounted in any position with handle located for
** O-Ring material suffix to match Disc suffix (i.e.-17889VT) 1
turning handle /4 turn counter clockwise (right hand operation). If clockwise r
specify. Care should be taken when mounting valve to be sure the I.D. of adj
WARNING Use only genuine Betts Industries Inc. replacement discparts. Use
of valve toof substitute
open freely. parts can impair
We suggest usingthe proper
our accompanying flanges an
functioning of the Wet-R-Dri Valve.
TM

TM
INDUSTRIES, INC.
INDUSTRIES, INC. WARREN, PA. April 2002
WARREN, PA.

1-179
 1
Wet-R-Dri VALVE / /
ValvesS AIR ACTUATED
Standard & Detent
& AIR - SPRING
TTMA STYLE
TTMA STYLE
A
A

LIGHTWEIGHT
LIGHTWEIGHT
COMPACT
COMPACT
VERSATILE B
VERSATILE
B
I.D.

I.D.

C
O.D

The Betts Wet-R-Dri Valve is designed for handling liquid, gaseous or dry products, and is available in a variety of sizes and
models. This space saving valve is lightweight, easily maintained, and has a positive stop in the open and closed position.
The air operated valve is opened and closed by air. The air-spring operated valve can be sold as either an air to open, spring
return valve or as an air to close spring to open valve. Please specify. O.D.

AirStandard
ActuatedModel
Model Air-Spring Model
Detent Model Standard
Standard Material
Material [Link]
Max. Working Temperature
Temperature
Size
Size Wt.
Wt. Wt.
Wt.
AssemblyNo.
Assembly No. AssemblyNo.
Assembly No. Body
Body Disc
Disc Pressure
Pressure Range
Range
WD217AL
WD200 ALBB 5.9
2.4 WD219AL
WD201 ALBB 2.4 6.4 Aluminum
Aluminum
2”
2” Buna-N 75PSI
PSI
WD217GI
WD200 GIBB 8.1
4.6 WD219GIGIBB
WD201 8.6
4.6 Iron Buna-N
GreyIron
Grey
75

Below
ChartBelow
WD317AL
WD300 ALBB 7.1
3.6 WD319AL
WD301 ALBB 3.6 7.6 Aluminum
Aluminum
3”
3” Buna-N 75PSI
PSI
WD317GI
WD300 GIBB 10.4
6.9 WD319GIGIBB
WD301 10.9
6.9 Iron Buna-N
GreyIron
Grey
75
WD417ALALVV 8.0 WD419ALALVV 4.5 8.5 Aluminum

SeeChart
4” WD400 4.5 WD401 Aluminum Viton 75PSI
PSI
4” WD417GIGIVV 11.8 WD419GIGIVV 12.3 Iron Viton
GreyIron 75
WD400 8.3 WD401 8.3 Grey
5”
5” WD517AL
WD500 ALVV 11.4
7.9 WD519AL
WD501 ALVV 7.9 11.9 Aluminum Viton
Aluminum Viton 50PSI
50 PSI

See
6”
6” WD617AL
WD600 ALUU 15.3
11.8 WD619AL
WD601 ALUU 11.815.8 Aluminum Urethane
Aluminum Urethane 50PSI
50 PSI
8”
8” WD817 AL
WD800 AL U U 20.8
17.3 WD819 AL
WD801 AL U U 21.3
17.3 Aluminum Urethane
Aluminum Urethane 50 PSI
50 PSI
NOTE:
NOTES: Standard
Standarddrilling
drillingfits
fitsTTMA
TTMArecommended
recommendedstandards.
standards.
Valves
Valves are
are available
available with the following options: Stainless
Stainless steel
steel liners
liners and
andshafts,
shafts,and
grease fittings installed
“E” Coating in thevalves
of aluminum drive and
bearing shafts, and
(recommended “E” Coating
for aluminum of aluminum
valves valvesservice).
used in water (recommended for aluminum valves used in water service).
For repair kit, see Section 20, Page 5B.

Dimensions Suffix for Disc Material

Dimensions Suffix for Disc Material
Buna-N Urethane
Size A B C I.D. O.D. B.C. Holes Buna-N Viton Urethane EPDM
Size A B C I.D. O.D. B.C. Holes Black White Viton Black White EPDM
5 13 1 1 3 3 7 Black White Black White
2” 133 /16 5 1 /16 11 /8 21/4 3 3/4 3 3/4 6- 7/16 B WB V U WU E
2” 6 5/4 45 /4 1 1/8 23/4 35 /4 37 /4 6-7 /16 B WB V U WU E
3” 133 /16 6 5/32 11 / 33/8 5 5/8 4 7/8 8- 7/16 -40°F -40°F -0°F -40°F -40°F -50°F
3” 6 5/4 411/8 1 1/88 33/8 55 /8 47 /8 8-7 /16 -40°F -40°F -0°F -40°F -40°F -50°F
4” 133 /16 6 1 /16 11 /8 43/8 6 5/8 5 7/8 8- 7/16 +200°F +200°F +400°F +200°F +200°F +300°F
4” 6 5/4 5 7/8 1 1/8 47 /8 65 /8 5 /8 8- 7/16 +200°F +200°F +400°F +200°F +200°F +300°F
5” 133 /16 73 / 21 / 57/ 7 5/8 7 12- 7/16 NOTE: Temperature ranges based on
5” 6 5/4 67 /88 2 1/88 5 1/16 75 / 17 12-7 / NOTE: Temperature
6” 13 /16 8 /16 21 /8 61/16
8 8 5/88 8 1/8 12- 7/1616 published information ranges
and maybased
vary on
6” 125 73 2 1/8 6 /8 8 7/8 8 1/8 12-7 /16 published information and may
due to actual operating [Link]
8” 13 /16 9 /8 21 /2 8 10 7/8 10 1/8 16- 7/16
8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to actual operating conditions.
INSTALLATION:
INSTALLATION:
The Wet-R-Dri
The Wet-R-DriValve may
Valve bebe
may mounted
mountedin in
any position
any with handle located for easy operation. Valve, as assembled, opens by
position.
1
turning
Care handle /4 turn
should be counter
taken clockwisevalve
when mounting (righttohand operation).
be sure the I.D. Ifofclockwise
adjoining rotation is desired
flanges or (left hand
pipe is large enoughoperation)
to allow please
disc of
specify.
valve Care should
to open beWe
freely. taken whenusing
suggest mounting valve to be sure
our accompanying the I.D.
flanges andofadapters
adjoiningshown
flanges or in
later pipe
ouriscatalog
large enough
. to allow
disc of valve to open freely. We suggest using our accompanying flanges and adapters shown in later sections of our catalog.
TM
TM

INDUSTRIES,
INDUSTRIES, INC.
INC.
Feb
Mar 1995
WARREN, PA.
WARREN, PA.

1-180
1 PARTS LIST

Wet-R-Dri VALVE / AIR

ValvesS/ StandardACTUATED
& Detent
& AIR - SPRING
TTMA STYLE

A
ACTUATOR ONLY PART NOS.
2” Thru 5” Spring Return Act. Part No. 46495AL
LIGHTWEIGHT
2” Thru 5” Double Acting Act. Part No. 46504AL
6” & 8” Spring Return Act. Part No. 46496AL
COMPACT
6” & 8” Double Acting Act. Part No. 46519AL
VERSATILE
INDICATOR PIN ASSEMBLY PART NO.
2” Thru 5” Part No. 19531AL
6” & 8” Part No. 19532AL
B

No. Description Req’d. Size Material Part No. No. Description

Size Req’d.
Material Part No.
1 Mtg. End Plate 1 2”Thru 8” Aluminum 19243ALEY 2”Thru 5” 316 Stnls. 19528SS
A4 Indicator Pin 1
2 O-Ring 2 2”Thru 8” Buna-N 17666BN 6”& 8” 316 Stnls. 19529SS
I.D.
3 Piston Seal As Req’d. 2”Thru 8” Buna-N 17669BN
A5 Spirol Pin 1 2”Thru 8” 304 Stnls. 9Q8601
1
4 Piston 1 2”Thru 8” Aluminum 19437AL
A6 /2 Star Washer 1 2”Thru 8” 410 Stnls. 9Q5916
4a Piston 1 2”Thru 8” Aluminum 19285AL
A7 Breather 1 2”Thru 8” Brass 9Z4895
5 Spring 1 2”Thru 8” 316 Stnls. 19413SS
31 Cap Screw 2 2”Thru 8” Steel 9Q5856
6 Cylinder 1 2”Thru 8” Aluminum 19240AL 2”,3”& 4” Cork-Neoprene 18308CN
32 Gasket 1
7 Stop Tube 1 2”Thru 8” Aluminum 19241AL 5”,6”& 8” Cork-Neoprene 19351CN
1 2”Thru 5” Aluminum 35390ALEY 2”Thru 5” Buna-N 17889**
8 Housing 1
1 6”& 8” Aluminum 33 O-Ring
35400ALEY 6” Buna-N 18831**
1 2”Thru 5” 17-4 Stnls. 19237SL 2 8” Buna-N 18831**
9 Clevis
1 6”& 8” 17-4 Stnls. 19238SL O.D. 2” Steel 27053MS
10 Button Head S.C.S. 2 2”Thru 8” Steel 9Q5940 3”& 4” Steel 27050MS
11 Hex Jam Nut 2 2”Thru 8” 34
Steel Zinc Plt. 9Q5910 Drive Shaft 1
Standard Model Detent Model Standard Material Max.5” Steel
Working 27051MS001
Temperature
Size
12 O-Ring 1 Wt. 8”
2”Thru Buna-N 17781BNWt. 6” Steel 16229MS
13 ShaftAssembly No.1 2”Thru 8” Assembly
304 Stnls. No.
Body
19239SL Disc Pressure
8” Steel Range
16229MS002
14 O-RingWD200 AL B1 2.4 8”
2”Thru WD201 AL19350BN
Buna-N B
Aluminum 2.4 2” WD101-2*
2”
15 Washer Buna-N 753” PSI * Specify
16 End Cap
WD200 GI B11 2”Thru 8”
4.6
2”Thru 8”
Aluminum
WD201
Aluminum
GI19268AL
B
Grey Iron
19244ALEY
4.6 4”
Material
WD101-3*
WD101-4*

See Chart Below

1 WD300 AL B4 3.6 8” WD301 AL9Q5845 B35
Aluminum Disc
3.6 1 See
17 /4 Lockwasher 2”Thru Steel 5” WD101-5*
3” Buna-N 75 PSI Section 20
18 WD300
Hex. Hd. Bolt GI B4 6.9 8”
2”Thru WD301
Steel Zinc Plt. GI9Q5938
B
Grey Iron 6.9 6” Page 4C WD101-6*
19 Retaining Ring
WD400 AL V22 2”Thru 8”
4.5 Steel Plated
WD401 AL9Q4932 V
Aluminum 4.5 8” WD101-8*
4”
20 Bearing 2”Thru 8” Bronze 9Z4870 Viton 752” PSI Buna-N 17781**
21 ClevisWD400
Pin GI V1 8.3
2”Thru 8” WD401
Steel Plated GI V
Grey
36 Iron
9Q4729 8.3
O-Ring 1 3”Thru 5” Buna-N 18141**
5”
22 CoverWD500
Plate AL V1 7.9 8”
2”Thru WD501 AL19490ALEY
Aluminum V 7.9
Aluminum Viton 50 8”
6”& PSI Buna-N 18831**
23 Hex. Hd. Bolt 4 2”Thru 8” Steel Zinc Plt. 9Q5849
36a O-Ring 1 8” Buna-N 18831**
6”
23a 1 WD600 AL U4
/4 Star Washer
11.8
2”Thru 8”
WD601 AL U
Aluminum
Steel Zinc Plt. 9Q5923
11.8 Urethane 502”
PSI Steel 16006MS
8”
24 GasketWD800 AL U1 17.38”
2”Thru WD801 AL19269CN
Cork-Neoprene U
Aluminum
37
17.3 Urethane
Bearing Shaft 1
50
3”ThruPSI
5” Steel 15913MS
6” Steel 16230MS
NOTE:
26 Standard drilling1 fits TTMA
O-Ring 2”Thru 8” recommended
Buna-N standards.
18066BN 8” Steel 16230MS002
Valves are available
27 Socket Hd. Screw with
1 the 2”Thru
following options: Stainless
8” Steel 9Q5798 steel liners and shafts, grease fittings installed
2”Thru 5” SteelinZinc
[Link] and
9Q4893
28 1/8 shafts,
bearing Pipe Plugand “E” 1Coating
2”Thruof8” aluminum
Steel (recommended38for aluminum
9V4915
valves Driv-Lok Pin valves2 used in
6” water
Steel Zinc Plt. 9Q4926
service).
A1 Plug 1
For
A2
repair kit, see Section
O-Ring 1
20,2”Thru
Page 8” Aluminum
5B.
2”Thru 8” Buna-N
19489AL
19357BN 39 Grease Fitting 1
8”
8”
Steel Zinc Plt. 9Q4938
Steel 9Z3058
A3 O-Ring 1 2”Thru 8” Buna-N 19505BN
** O-Ring material suffix toDimensions
match Disc suffix (i.e.-17889VT) Suffix for Disc Material
PART REQ’D Buna-N Urethane
Size A ON SPRING
B RETURN
C MODELS
I.D. ONLY
O.D. B.C. Holes Viton EPDM
 PART REQ’D ON DOUBLE ACTING MODELS ONLY Black White Black White
3 1 1 1 3 3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B WB V U WU E
3 5 1 3 5 7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F -40°F -0°F -40°F -40°F -50°F
3 1 1 3 5 7 7
4” 6 /4 5 /8 1 /8 4 /8 6 /8 5 /8 8- /16 +200°F +200°F +400°F +200°F +200°F +300°F
3 3 1 7 5 7
5” 6 /4 6 /8 2 /8 5 /16 7 /8 7 12- /16 NOTE: Temperature ranges based on
1 1 5 1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published information and may vary
WARNING
8” 12 Use only
8 genuine1
2 /2 Betts
8 Industries
7 Inc.1 replacement
10 /8 10 /8 16- /16
7 parts.
due Use of substitute
to actual operatingparts can impair the proper
conditions.
functioning of this product.
INSTALLATION:
The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by
1
turning handle /4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please
TM

specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow
INDUSTRIES, INC. Feb 1998
disc of valve to open freely.
WARREN, We
PA. suggest using our accompanying flanges and adapters shown in later sections of our catalog.
TM

INDUSTRIES, INC. Feb 1995

WARREN, PA.

1-181
 PARTS LIST 1
Valves S
Wet-R-Dri VALVE
9 8 28 2 7 6 5 2 1
TTMA"B"
STYLE
/ Standard & Detent 10
DETAIL
11
AIR TO OPEN OR CLOSE – SPRING RETURN SHOWN A
1 NPT
8
LIGHTWEIGHT

COMPACT

VERSATILE
SECTION A-A
16 11 15 14 A7 13 12 A6

SUFFIX 151 B
OPTIONAL BREATHER ASSEMBLY
PART REQ'D ON SPRING RETURN MODELS ONLY
PART REQ'D ON DOUBLE ACTING MODELS ONLY
A1 A2 A3I.D.
A4 A5 90° BRASS ELBOW BETTS TUBING 6" LG.

23 23a 19 20 21 20 19 18

22
17

24
O.D.
33 A A
Standard Model Detent Model 31 Standard Material Max. Working Temperature
Size Wt. Wt.
Assembly No. Assembly No. 32 Body Disc Pressure Range
26 27
WD200 AL B 2.4 34 WD201 AL B 2.4 Aluminum
2” Buna-N 75 PSI
WD200 GI B 4.6 WD201 GI B 4.6 Grey Iron

See Chart Below

WD300 AL B 3.6 WD301 AL B 3.6 Aluminum 38
3” Buna-N 75 PSI
WD300 GI B 6.9 WD301 GI B 6.9 Grey Iron
WD400 AL V 4.5 35 WD401 AL V 4.5 Aluminum
4” Viton 75 PSI
WD400 GI V 8.3 WD401 GI V 8.3 Grey Iron
5” WD500 AL V 7.9 WD501 AL V 7.9 Aluminum Viton 50 PSI
6” WD600 AL U 11.8 WD601 AL U 11.8 Aluminum Urethane 50 PSI
8” WD800 AL U 17.3 WD801 AL U 17.3 Aluminum Urethane 50 PSI
36a
NOTE: Standard drilling fits TTMA recommended standards.
Valves are available with the following
36
options: Stainless steel liners and shafts, grease fittings installed in the drive and
bearing shafts, and “E” Coating of aluminum valves (recommended 38 for aluminum valves used in water service).
For repair kit, see Section 20, Page
37 5B. 39

Dimensions Suffix for Disc Material

Buna-N Urethane
Size A B C I.D. O.D. B.C. Holes Viton EPDM
Black White Black White
3 1 1 1 3 3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B WB V U WU E
3 5 1 3 5 7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F -40°F -0°F -40°F -40°F -50°F
+200°F3
3 1 1 3 5 7 7
4” 6 /4 5 /8 4a
1 /8 4 /8 6 /8 5 /8 38- /16 +200°F 4
+200°F +400°F +200°F +300°F
3 3 1 7 5 7
5” 6 /4 6 /8 2 /8 5 /16 7 /8 7 12- /16 NOTE: Temperature ranges based on
1 1 5 1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published information and may vary
DETAIL "B" PISTON
10& /SEAL SPRING RETURN MODEL ONLY
1 7 1 7
8” 12 8 2 /2 DOUBLE
8 ACTING
10 /8 MODEL 16- /16
8 ONLY
due to actual operating conditions.
DETAIL "B" PISTON & SEAL
INSTALLATION:
TheWARNING Use only
Wet-R-Dri Valve maygenuine Betts in
be mounted Industries Inc. with
any position replacement parts. Use
handle located of substitute
for easy [Link] canasimpair
Valve, the proper
assembled, opens by
1 functioning of this product.
turning handle /4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please
specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow
disc of valve to open freely. We suggest using our accompanying flanges and adapters shown in later sections of our catalog.
TM

INDUSTRIES, INC. June 2002

TM
WARREN, PA.

INDUSTRIES, INC. Feb 1995

WARREN, PA.

1-182
1 PARTS LIST
BETTS - Wet-R-Dri
Wet-R-Dri VALVE
Valves / Standard &
A

REPAIR KITS LIGHTWEIGHT

COMPACT
For WD Repair Kit Suffix: BN Buna-N Disc
Valve Size Part No. VERSATILE
PY Urethane Disc
VT Viton Disc
WD18402BN EP EPDM Disc
2”
WD18402VT
REPAIR KITS CONSIST OF:
WD18403BN
3” 1 Disc
WD18403VT
2 Drive Shaft O-Rings I.D.
4” WD18404VT 1 Bearing Shaft O-Ring
5” WD18405VT 2 Drive Lock Pins
WD18406PY 2 Flange Gaskets
6”
WD18406VT 1 Sec. 20, Page 1A & B
WD18408PY
8”
WD18408VT
All Detent WD18400SL Detent Repair Kit (For all sizes detent models)
O
CONSISTS OF:
1 Detent Ball
Standard ModelWD109SL Detent Model Standard M
Size Wt. Wt.
1 Detent Spring No. WD110SL Assembly No.
Assembly Body
1 Retaining Screw
WD200 AL B WD111SL
2.4 WD201 AL B 2.4 Aluminum
2” Bu
WD200 GI B 4.6 WD201 GI B 4.6 Grey Iron
WD300 AL B 3.6 WD301 AL B 3.6 Aluminum
3” Bu
WD300
For Detent model valves a Detent Repair Kit is required in addition to the GI B 6.9
appropriate WD301
size valve GI kit.
repair B 6.9 Grey Iron
WD400 AL V 4.5 WD401 AL V 4.5 Aluminum
4” Vi
WD400 GI V 8.3 WD401 GI V 8.3 Grey Iron
5” WD500 AL V 7.9 WD501 AL V 7.9 Aluminum Vi
6” WD600 AL U 11.8 WD601 AL U 11.8 Aluminum Ur
8” WD800 AL U 17.3 WD801 AL U 17.3 Aluminum Ur
NOTE: Standard drilling fits TTMA recommended standards.
Valves are available with the following options: Stainless steel liners and shaft
bearing shafts, and “E” Coating of aluminum valves (recommended for alumin
For repair kit, see Section 20, Page 5B.

Dimensions
Buna-N
Size A B C I.D. O.D. B.C. Holes
Black W
3 1 1 1 3 3 7
2” 6 /4 4 /4 1 /8 2 /4 3 /4 3 /4 6- /16 B W
3 5 1 3 5 7 7
3” 6 /4 4 /8 1 /8 3 /8 5 /8 4 /8 8- /16 -40°F -4
3 1 1 3 5 7 7
4” 6 /4 5 /8 1 /8 4 /8 6 /8 5 /8 8- /16 +200°F +2
3 3 1 7 5 7
5” 6 /4 6 /8 2 /8 5 /16 7 /8 7 12- /16 NOTE: Tem
1 1 5 1 7
6” 12 7 2 /8 6 /8 8 /8 8 /8 12- /16 published in
1 7 1 7
8” 12 8 2 /2 8 10 /8 10 /8 16- /16 due to actua
INSTALLATION:
The Wet-R-Dri Valve may be mounted in any position with handle located for ea
1
turning handle /4 turn counter clockwise (right hand operation). If clockwise rota
specify. Care should be taken when mounting valve to be sure the I.D. of adjoin
disc of valve to open freely. We suggest using our accompanying flanges and ad
TM
TM

INDUSTRIES, INC.
INDUSTRIES, INC. WARREN, PA. January 1989
WARREN, PA.

1-183
 1

1-184
1
WELDING FLANGES
Betts Industries, Inc.

WELD BLIND
No. of Hole
FLANGE FLANGE Thickness O.D. I.D. B.C.
Holes Size
Size Material Part No. Part No.
1
Steel WF201MS BWF201MS /4 1 7 3 7
2” 3 4- /2 2- /16 3- /4 6 /16
Aluminum WF201AL BWF201AL /8
1
Steel WF301MS BWF301MS /4 5 9 7 7
3” 3 5- /8 3- /16 4- /8 8 /16
Aluminum WF301AL BWF301AL /8
5
Steel WF401MS BWF401MS /16 5 9 7 7
4” 3 6- /8 4- /16 5- /8 8 /16
Aluminum WF401AL BWF401AL /8
5
Steel WF501MS BWF501MS /16 3 9 7
5” 3 7- /4 5- /16 7 12 /16
Aluminum WF501AL BWF501AL /8
5
Steel WF601MS BWF601MS /16 11 1 7
6” 3 9 6- /16 8- /8 12 /16
Aluminum WF601AL BWF601AL /8
1
Steel WF801MS BWF801MS /2 7 11 1 7
8” 1 10- /8 8- /16 10- /8 16 /16
Aluminum WF801AL BWF801AL /2
1 3 13 1 5
12” Steel WF1201MS /2 15- /4 12- /16 14- /2 8 /8

NOTE: Drilling in accordance with TTMA recommended standards

TM

INDUSTRIES, INC. Nov 1991

WARREN, PA.

1-185
 1

1-186
1

Civaflo Manifold

CivaFlo Dual Manifold System

The CIVAFLO Dual Manifold & Fuel Control
System by CIVACON helps improve the quality
and performance of your delivery service.
Single Manifold also available (Not shown).

Eliminate the number of adaptors, couplers, and

jumper hoses needed to unload fuel:

• Improves driver productivity.

• Improves driver safety.
• Eliminates mess and hassles.
• Reduces potential environmental hazards and
clean-up costs.

Ensure that pipe connections are correctly

matched with fuel compartments before any fuel
can be unloaded:

• Ensures Quality Control On

All Deliveries.

• Reduces Potential Product Cross

Contamination.
Bottom Loading
• Enhances Security The guard bar is released
to provide access to the
API coupler. Both manifold
Manifold Valve valves remain closed
The air activated manifold chamber is a
providing for high,
double-acting cylinder assembly that
guarantees valve opening/closing every unobstructed flow rates
time. Its closed loop pneumatic system
keeps debris from entering the valve.
The manifold chamber open/close
status is clearly indicated by a “red” Diesel
Air Open
Gas
Air Closed
Diesel
Air Closed
Gas
Air Open
indicator visible through the
transparent lens located on the top of
each manifold valve.

Interlocked/Independent Diesel Gas

Manifold Galleries
Two different fuel types can be
dispensed from the same vehicle by
simply selecting between the two
independent manifold galleries. The air
activation system only allows one Diesel to Pump Gas to Pump

manifold to be opened at any time. The

manifold galleries are specific to either
the gasoline or the diesel PTO and Pump Unloading – Manifold and Valve Operation
pump, this means that the manifold During pump unloading, the appropriate manifold and valve is selected
chambers are discriminate depending to allow the flow of fuel into the collection tubes, through the pump
on the fuel selected to ensure that cross and then dispensed through the meter and hose.
contamination is never a problem.

1-187
 1

CivaControl™ Air System

Take Control of Your

Entire Tank System
During Loading and
Unloading
Fail Safe Operation
Our CivaControl Air System will provide a simple
Control for the entire tank system during loading
and unloading. CivaControl Air Systems bring
together the control of Compartment Vents,
Vapor Recovery Valves, Internal Valves, Overfill
Detection and Vehicle Drive Away systems.

Tank Protection
Fully-sequenced operation ensures the tank can
only be loaded or unloaded when the truck is in Easy to Install
a totally ready condition. All valves are conveniently pre-mounted on a stainless
steel panel for easy mounting in a central location.
Purpose Built
Specifically-designed, unique-function, heavy-duty Versatile
pneumatic control valves ensures reliable CivaControl Air Systems control the full spectrum of
performance in extreme operating conditions. tank truck and tank trailer functions. Whether installed
• Temperature range (-40º F to 150º F). on petroleum transport trailers or tank trucks equipped
• Robust controls are ergonomically positioned for with Civacon Manifolds, you’re always in complete
ease of operation. control. Conveniently mounted air pressure gauge and
visual indicator advise the readiness of the system.
• Available for tanks with 1 to 12 compartments.

CivaControl Ordering Information

Number of
Compartments Part Number Panel Length ‘L’
1 CCP-1 4.5" Square
2 CCP-2 12.0"
3 CCP-3 12.0"
4 CCP-4 12.0"
5 CCP-5 12.0"
6 CCP-6 13.8"
7 CCP-7 17.2"
8 CCP-8 17.2"
9+ Consult Factory
CCP-1 used as a Load Valve to release the Guard Bar Lock
over APIs. Pop-Up confirms Vapor Vents are “open”. NOTE: CCP-1 has no Pressure Gauge.

1-188
1 CF14-14-XXX-XXX MANIFOLD ASSEMBLY
FOR 14" CENTERS
CF14-11-XXX-XXX MANIFOLD ASSEMBLY
FOR 11" CENTERS

5 4

3
10

6
8

ITEM PART NUMBER DESCRIPTION

1 10540M SINGLE MANIFOLD VALVE ASSEMBLY
2 10982M SPACER, 1" WIDE FOR 12" CENTERS
3 10562M COLLECTOR PIPE FOR 14" CENTERS
3 10561M COLLECTOR PIPE FOR 11" CENTERS
4 10773M SCREW, M10 X 30 ZINC PLATED (TYPICAL)
5 10237M WASHER, M10 ZINC PLATED (TYPICAL)
6 10494M O-RING, 102 X 3 NITRILE (TYPICAL)
7 10644M COLLECTOR SIGHT GLASS FOR 14" CENTERS
7 10698M COLLECTOR SIGHT GLASS FOR 11" CENTERS
8 10798M COLLECTOR TEE FOR 14" CENTERS, 3" VICTAULIC
8 10697M COLLECTOR TEE FOR 11" CENTERS, 3" VICTAULIC
9 10558M END CAP, COLLECTOR
10 10983M OUTLET ADPATER, 4" TTMA (OPTIONAL)

REV 1 29AUG05

1-189
 1
10540M SINGLE MANIFOLD VALVE ASSEMBLY

ITEM PART NUMBER DESCRIPTION QTY.

1 10387M BODY, SINGLE MANIFOLD, MACHINED 1
2 10241M O-RING, 6 X 2.5 1
3 10776M O-RING, -015 1
4 10209M INDICATOR WASHER 1
5 10773M SIGHT GLASS 1
6 10237M RETAINING RING, 2-3/4" ZINC PLATED 1
7 10390M CYLINDER, SINGLE MANIFOLD, MACHINED 1
8 10242M O-RING, 103 X 2 VITON 1
9 10203M PISTON 1
10 10204M MAIN SHAFT 1
11 10206M PISTON WASHER 1
12 10205M PISTON SHAFT NUT 1
13 10233M SPRING, COMPRESSION 1
14 10476M O-RING, 52 X 6 1
15 10232M SEAL WASHER, 5/16" 1
16 10235M SCREW, M8 X 20 5
17 10210M POPPET 1
18 10240M O-RING, 12.5 X 2.5 1
19 10211M O-RING, 79 X 7 VITON 1
20 10202M CYLINDER END PLATE 1
21 10243M O-RING 63 X 3 1
22 10238M WIPER SEAL, .625 ID, VITON GF 1
23 10520M O-RING, 15.9 X 2.4 1
24 10207M INDICATOR ROD 1
25 10772M CARRIER, SIGHT GLASS 1
26 10537M BLANKING PLATE, RETURN SPOUT 1
27 10276M SCREW, M8 X 25 1
28 10277M SCREW, M8 X 35 2
29 10263M WASHER, M8 FLAT PLATED 3
30 10262M NUT, M8 HEX PLATED 2
31 10269M O-RING, 39 X 2.5 1

REV 1 1SEP05

1-190
1 10540M SINGLE MANIFOLD VALVE ASSEMBLY
25 5 3
1
27 29
16

A A 4 2
7
12
11 9
26
24
14
18
28 29 30
6
21

8
31
23

20

22 10

13

SECTION A-A
15 16 17 19

REV 1 1SEP05

1-191
10544M GUARD BAR LOCKING VALVE ASSEMBLY 1

5 9
1 8

3
2
4 6 SECTION A-A 7

A A

ITEM PART NUMBER DESCRIPTION QTY.

1 10221M BODY, ANODIZED ALUMINUM 1
2 10222M PISTON 1
3 10223M END CAP 1
4 10224M WIPER SEAL, NITRILE 1
5 10225M O-RING, 20 X 2.5, NITRILE 2
6 10226M O-RING, 14 X 3, NITRILE 1
7 10227M O-RING, 22 X 1.5 NITRILE 1
8 10228M RETAINING RING, 1-1/16" 1
9 10229M SPRING, COMPRESSION 1

REV 1 29AUG05
1-192
1 10557M COLLECTOR TEE ASSEMBLY
FOR 14" CENTERS

10556M COLLECTOR TEE ASSEMBLY

FOR 11" CENTERS

A A

SECTION A-A
SCALE 1 : 2
2

ITEM PART NUMBER DESCRIPTION QTY.

1 10797M COLLECTOR TEE FOR 14" CENTERS 1
1 10755M COLLECTOR TEE FOR 11" CENTERS 1
2 10494M O-RING, 102 X 3 VITON 2

REV 1 29AUG05

1-193
 10562M COLLECTOR PIPE ASSEMBLY 1
FOR 14" CENTERS

10561M COLLECTOR PIPE ASSEMBLY

FOR 11" CENTERS

A A

SECTION A-A
SCALE 1 : 2

ITEM PART NUMBER DESCRIPTION QTY.

1 10571M COLLECTOR PIPE FOR 14" CENTERS 1
1 10570M COLLECTOR PIPE FOR 11" CENTERS 1
2 10494M O-RING, 102 X 3 VITON 2
- 10576M SCREW, M10 X 1. 5 X 35 LONG, ZINC PLATED 6
- 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 6

REV 1 29AUG05
1-194
1 10644M SIGHT GLASS ASSEMBLY
FOR 14" CENTERS

10698M SIGHT GLASS ASSEMBLY

FOR 11" CENTERS
5
2
4

5
3

6
SECTION A-A

A A

ITEM PART NUMBER DESCRIPTION QTY.

1 10569M COLLECTOR SIGHT GLASS HOUSING, 14" CENTERS 1
1 10568M COLLECTOR SIGHT GLASS HOUSING, 11" CENTERS 1
2 10525M SIGHT GLASS FOR 14" CENTERS 1
2 10524M SIGHT GLASS, 11" CENTERS 1
3 10507M ALUMINUM SEAL RING, COLLECTOR SIGHT GLASS 1
4 10494M O-RING, 102 X 3 VITON, BODY TO MANIFOLD VALVE 2
5 10495M O-RING, 104 X 4 VITON, GLASS SEALING 2
6 10496M O-RING, -046 VITON SEAL RING 1
- 10576M SCREW, M10 X 1. 5 X 35 LONG, ZINC PLATED 6
- 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 6

REV 1 29AUG05
1-195
 1
10982M 1" COLLECTOR SPACER ASSEMBLY

2 1

ITEM PART NUMBER DESCRIPTION QTY.

1 10751M SPACER, 1" WIDE FOR COLLECTOR 1
2 10494M O-RING, 102 X 3 NITRILE 1
3 10750M SCREW, M10 X 1.5 X 55, ZINC PLATED 1
4 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 1

REV 1 29AUG05

1-196
1 CF24-14-XXX-XXX MANIFOLD ASSEMBLY
FOR 14" CENTERS
10 CF24-11-XXX-XXX MANIFOLD ASSEMBLY
FOR 11" CENTERS

4 5

6
7

10
8

ITEM PART NUMBER DESCRIPTION

1 10541M DUAL MANIFOLD VAVLE ASSEMBLY
2 10982M SPACER, 1" WIDE FOR 12" CENTERS
3 10562M COLLECTOR PIPE FOR 14" CENTERS
3 10561M COLLECTOR PIPE FOR 11" CENTERS
4 10521M SCREW, M10 X 30 ZINC PLATED (TYPICAL)
5 10740M WASHER, M10 ZINC PLATED (TYPICAL)
6 10494M O-RING, 102 X 3 NITRILE (TYPICAL)
7 10644M COLLECTOR SIGHT GLASS FOR 14" CENTERS
7 10698M COLLECTOR SIGHT GLASS FOR 11" CENTERS
8 10798M COLLECTOR TEE FOR 14" CENTERS, 3" VICTAULIC
8 10697M COLLECTOR TEE FOR 11" CENTERS, 3" VICTAULIC
9 10558M END CAP, COLLECTOR
10 10983M OUTLET ADAPTER, 4" TTMA (OPTIONAL)

REV 1 29AUG05

1-197
 1
10541M DUAL MANIFOLD VALVE ASSEMBLY

ITEM PART NUMBER DESCRIPTION QTY.

1 10386M BODY, DOUBLE MANIFOLD, MACHINED 1
2 10241M O-RING, 6 X 2.5 2
3 10776M O-RING, -015 2
4 10209M INDICATOR WASHER 2
5 10773M SIGHT GLASS 2
6 10237M RETAINING RING, 2-3/4" ZINC PLATED 2
7 10391M CYLINDER, DUAL MANIFOLD, MACHINED 2
8 10267M O-RING, 85 X 2 VITON 2
9 10203M PISTON 2
10 10204M MAIN SHAFT 2
11 10206M PISTON WASHER 2
12 10205M PISTON SHAFT NUT 2
13 10233M SPRING, COMPRESSION 2
14 10476M O-RING, 52 X 6 2
15 10232M SEAL WASHER, 5/16" 2
16 10235M SCREW, M8 X 20 10
17 10265M POPPET 2
18 10240M O-RING, 12.5 X 2.5 2
19 10783M O-RING, -335 VITON 2
20 10202M CYLINDER END PLATE 2
21 10243M O-RING 63 X 3 2
22 10238M WIPER SEAL, .625 ID, VITON GF 2
23 10520M O-RING, 15.9 X 2.4 2
24 10207M INDICATOR ROD 2
25 10772M CARRIER, SIGHT GLASS 2
26 10537M BLANKING PLATE, RETURN SPOUT 2
27 10276M SCREW, M8 X 25 1
28 10277M SCREW, M8 X 35 2
29 10263M WASHER, M8 FLAT PLATED 3
30 10262M NUT, M8 HEX PLATED 2
31 10269M O-RING, 39 X 2.5 1

REV 1 1SEP05

1-198
1 10541M DUAL MANIFOLD VALVE ASSEMBLY
5
3
1
16
4
27 29
25
2

24 7

12
9

11
26 28 29 30 14

18 21

8 6
31
23 20

22

13

10

19
15
16
17

REV 1 1SEP05

1-199
 1
10546M NPT RETURN SPOUT ASSEMBLY
A 3
4
2
9
8
1

11

7 5
10

13
A 12
SECTION A-A

ITEM PART NUMBER DESCRIPTION QTY.

1 10539M BODY, RETURN SPOUT NPT, MACH. 1
2 10249M RETAINING RING, 1-3/4" 1
3 10250M RETAINING RING, 2" 1
4 10251M STRAINER, SS 1
5 10252M O-RING, 44 X 3, NITRILE 1
6 C10316M SIGHT GLASS 1
7 10512M SCREW, M6 X 1 X 12 4
8 H51437M O-RING, SIGHT GLASS, NITRILE 1
9 10733M CHECK VALVE, RETURN SPOUT 1
10 10765M CHECK VALVE, BLOW-DOWN 1
11 10766M BALL VALVE, BLOW-DOWN 1
12 10767M FITTING, BRASS ELBOW 1
13 10269M O-RING, 39 X 2.5, NITRILE 1
- 10276M SCREW, M8 X 1.25 X 25 1
- 10277M SCREW, M8 X 1.25 X 35 2
- 10263M WASHER, M8 FLAT 2
- 10262M NUT, M8 2

REV 1 29AUG05

1-200
1
10558M END CAP ASSEMBLY

2
1
3

ITEM PART NUMBER DESCRIPTION QTY.

1 10506M END CAP, MANIFOLD COLLECTOR 1
2 10494M O-RING, 102 X 3 NITRILE 1
3 10521M SCREW, M10 X 1.5 X 30, ZINC PLATED 3
4 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 3

REV 1 29AUG05

1-201
 10641M API GUARD BAR ASSEMBLY 1

8 9 10

2
5 6 7

4 17
1
3
14

11 12

13

15

12 16
(GUARD BAR NOT SHOWN IN THIS VIEW)

REV 1 29AUG05

1-202
1
10641M API GUARD BAR ASSEMBLY
ITEM PART NUMBER DESCRIPTION
1 10542M ASSEMBLY, API GUARD BAR ARM
2 10213M SHOULDER BOLT, GUARD BAR ARM
3 10745M CAP, GUARD BAR ARM
4 10643M-LENGTH GUARD BAR EXTRUSION
5 1228 SCREW, 1/4-20 X 1" ZINC PLATED
6 1691 WASHER, 1/4 FLAT ZINC PLATED
7 10807M NUT, 1/4-20 NYLON LOCKING
8 10274M NUT, M5 ACORN, PLATED
9 10255M WASHER, M5 PLATED
10 10258M MAGNET BUTTON, PLATED
11 10264M SCREW, M8 X 40 ZINC PLATED
12 10263M WASHER, M8 FLAT PLATED
13 10534M MAGNET BRACKET
14 10270M MAGNET
15 10544M GUARD BAR LOCK
16 10280M SCREW, M8 X 45 ZINC PLATED
17 10245M BUSHING, GUARD BAR ARM

REV 1 29AUG05

1-203
 10798M COLLECTOR TEE ASSEMBLY 1
FOR 14" CENTERS with 3" VICTAULIC OUTLET

10697M COLLECTOR TEE ASSEMBLY

FOR 11" CENTERS with 3" VICTAULIC OUTLET

A A

SECTION A-A
SCALE 1 : 2
2

ITEM PART NUMBER DESCRIPTION QTY.

1 10797M COLLECTOR TEE FOR 14" CENTERS 1
1 10755M COLLECTOR TEE FOR 11" CENTERS 1
2 10494M O-RING, 102 X 3 VITON 2
3 9901 PLUG, 1/2 NPT BRASS 1
- 10576M SCREW, M10 X 1. 5 X 35 LONG, ZINC PLATED 6
- 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 6

REV 1 29AUG05

1-204
1
10983M 4" TTMA ADAPTER ASSEMBLY

ITEM PART NUMBER DESCRIPTION QTY.

1 10974M 4" TTMA FLANGE WELDMENT (2-3/4" LONG) 1
2 10494M O-RING, 102 X 3 NITRILE 1
3 10521M SCREW, M10 X 1.5 X 30, ZINC PLATED 3
4 10740M WASHER, M10 SPRING LOCK, ZINC PLATED 3

REV 1 29AUG05

1-205
 1
 

 

The Betts air distributor is designed as a

corrosion resistant, modular, lightweight and
compact air distribution system that can be used
to control any sequential or non-sequential air
operated valve or vent system.

The distributor body is made from anodized

aluminum, with internal parts made from brass
and stainless steel with nitrile seals. The
individual valve toggle switches are easily
accessible for replacement. Push-to-connect
fittings are included to allow quick and easy
installation with ¼” air lines.

The air distributor includes a push-pull master

control valve. The push-pull master control is a
two position detent valve. Pull and hold the
master control knob out to send air to the
sequential vapor valves. Once the vapor valves
have all opened, the air is returned to the master
control and enters the “VENT RETURN” port.

A pressure wink changes from black to green to

indicate air is back to the master control from the
vents and the system is charged.

The individual compartment toggle valves are

used to open and close the emergency valves.
The master control valve can be used as a
complete system shutdown. If the master
control knob is depressed to the detent exhaust
position, air is fully vented from the system
shutting down all valves/vents connected to the
toggle outlets.

A Weight
Description Part Number
in. [mm] lb. [kg]
Maximum Operating Pressure = 125 psi [9 bar]
1 Compartment AD36098-1ALB 4.25 [108] 1.35 [.61] compressed air.
2 Compartment AD36098-2ALB 5.50 [139.7] 1.68 [.77]
3 Compartment AD36098-3ALB 6.75 [171.5] 2.01 [.92] Temperature Range = -20°F to 180°F [-29°C to
4 Compartment AD36098-4ALB 8.00 [203.2] 2.34 [1.07] 82°C]
5 Compartment AD36098-5ALB 9.25 [235] 2.67 [1.22]

• See maintenance manual MM-AD001 for more information.

• Mount with exhaust ports unobstructed.

TM

June 2009

1-206
1
 

A representative part numbering system is used for air manifolds. Each letter or digit in the part number is
indicative of a particular feature or option as shown in the chart. If a particular option is not covered by the
standard numbering system, a three digit suffix will apply.

Sample Part #: MD34V12BCX001

M = Air Manifold
Three Digit Suffix:
Style: May be used to
S = Single denote specials
D = Dual API Outlet:
X = No API (Standard)
Number of Compartments: A = Openable API w/ Site Glass
2 = 2 Compartments B = Openable API w/o Site Glass
3 = 3 Compartments C = Non-Openable API w/ Site Glass
4 = 4 Compartments D = Non-Openable API w/o Site Glass
Etc. for larger manifolds
Site Glass Option:
On Center Measurements: C = 1 Connector Site Glass in Each Bank
1 = 11” On Center X = No Connector Site Glass
4 = 14” On Center
Options:
P = Product Return
Seal Material:
G = Guard Bar
V = FKM “BLT” (Standard)
B = Product Return & Guard Bar
Q = Fluorosilicone
X = None
F = FKM “GFLT-s”

Manifold Outlet Location Manifold Outlet Location (Rear Bank)

(For Single and Front Bank of Dual) (For Dual Manifold Only)

X = For Single Manifold

A = 3” TTMA Flange Outlet Here

1 = 3” Grooved Outlet Here

B = 3” TTMA Flange Outlet Here

2 = 3” Grooved Outlet Here

C = 3” TTMA Flange Outlet Here

3 = 3” Grooved Outlet Here

A = 3” TTMA Flange Outlet Here

1 = 3” Grooved Outlet Here

B = 3” TTMA Flange Outlet Here

2 = 3” Grooved Outlet Here

C = 3” TTMA Flange Outlet Here

3 = 3” Grooved Outlet Here

* Continue sequence for larger manifolds

TM

March 2009

1-207
 1
 

NUMBER OF COMPARTMENTS
DIMENSION / FEATURE ON-CENTER DISTANCE 2 3 4 5 6 7 8
22.2 33.2 44.2 55.2 66.2 77.2 88.2
11" CENTERS 563 mm 843 mm 1123 mm 1410 mm 1682 mm 1961 mm 2240 mm
A
25.2 39.2 53.2 67.2 81.2 95.2 109.2
14" CENTERS 640 mm 996 mm 1351 mm 1707 mm 2063 mm 2418 mm 2774 mm
22.6 33.6 44.6 55.6 66.6 77.6 88.6
11" CENTERS 574 mm 853 mm 1133 mm 1412 mm 1692 mm 1971 mm 2250 mm
B
28.6 42.6 56.6 70.6 84.6 98.6 112.6
14" CENTERS 726 mm 1082 mm 1438 mm 1793 mm 2148 mm 2504 mm 2860 mm

11" CENTERS 10.4 [264 mm]

C
14" CENTERS 9.9 [252 mm]
• Inlet/outlet flanges are 4” TTMA.
• Tee outlets are 3” Victaulic grooved or 3” TTMA flanged.
• Product return inlets (when equipped) are 2” male NPT.
• Each endplate has two 7/16-14 mounting holes located 2.75” apart horizontally, on center with each manifold bank, 4.92”
below the main 4” TTMA flanges.
TM

March 2009

1-208
1
 

Betts pneumatic manifold is an air-

operated valve system designed to be
used on tanker trucks hauling a variety
of products that unload multiple
compartments by a pump system. It can
be specified to accommodate bottom-
loading, gravity-unloading and product
return.
The single bank configuration is designed
for tanks equipped with a single pump-off
system. In this configuration, all products
are unloaded through a common manifold
outlet.

Construction is aluminum with stainless

hardware. The inlet/outlet flanges are 4”
TTMA, and bottom chamber outlet is 3”.
Product return threading is 2” NPT.

Available options include a guard bar for

safety and security, product return
nozzles, and clear acrylic site glass connectors. The manifold can be ordered with one to eight compartments, and the distance
between the outlet flanges can be 14” or 11”. Manifold outlets are available as 3” flanged or grooved. API bottom loading adapters
can be ordered with assembly. FKM ‘BLT’ is the standard seal, with fluorosilicone or FKM ‘GFLT-S’ available as options.

47098ALVB SINGLE ITEM PART # Req. DESCRIPTION

MANIFOLD ASSEMBLY 1 36082ALVB 1 AIR CYLINDER ASSEM. - SINGLE MF
2 9Q5822 8 HH BOLT - 1/4"
1
* 3 9Q5844 8 1/4" SPRING LOCK WASHER
2 3 4 18134VB 1 POPPET O-RING - SINGLE MF
A 5 36083ALVB 1 PRODUCT RETURN ASSEMBLY
2
6 18832VB 1 PRODUCT RETURN O-RING
3 7 47081AL 1 UNLOADING BODY - SINGLE MF
8 47084AL 1 MANIFOLD BODY - SINGLE MF
4 9 9Q3004 4 HH BOLT - 7/16"
10 9Q8616 4 7/16" SPRING LOCK WASHER
16 11 9Z6192 1 GUARD BAR BEARING
12 47088AL 1 GUARD BAR SWING ARM
5 * 9 10 11
13
14
9Q8613
9Q8614
1
1
BRASS WASHER
BELLEVILLE WASHER
15 9Q5986 1 HH BOLT 1/2"
6 12 16 17944VB 2 MAIN BODY SEAL – SINGLE MF
7
SEAL MATERIAL TEMPERATURE RANGE
FKM ‘BLT’ -20°F to 220°F [-29°C to 104°C]
8 FLUOROSILICONE -50°F to 220°F [-45°C to 104°C]
FKM ‘GFLT-S’ -20°F to 220°F [-29°C to 104°C]
16
MAWP 25 PSI [172 kPa]
13 14 15 BURST PRESSURE 100 PSI [689 kPa]

CONFIGURATION WEIGHT PER COMP.

STANDARD 24 lbs [10.9 kg]
W/ GUARD BAR 27.5 lbs [12.5 kg]
W/ PRODUCT RETURN 25.5 lbs [11.6 kg]
W/ GUARD BAR. & PROD. RETURN 29 lbs [13.2 kg]
W/ G.B., PROD. RET., & API VALVE 44 lbs [20 kg]

CAUTION: Manifold must be properly installed and maintained per maintenance manual MM-AM001. Failure to do so may result
in damage to the tank and or manifold. Use only genuine Betts Industries Inc. replacement parts. Substitute parts can impair the
proper function of this product.
TM

March 2009

1-209
 1
 

Betts pneumatic manifold is an air-operated

valve system designed to be used on tanker
trucks hauling a variety of products that
unload multiple compartments by a pump
system. It can be specified to accommodate
bottom-loading, gravity-unloading and
product return.
The dual bank configuration is designed for
tanks equipped with two pump-off systems.
This is common on tanks that haul both
gasoline and diesel.
Construction is aluminum with stainless
hardware. The inlet/outlet flanges are 4”
TTMA, and bottom chamber outlet is 3”.
Product return threading is 2” NPT.

Same options available for dual manifold as

specified for single manifold on section 6
page 1B.

47108ALVB DUAL
MANIFOLD ASSEMBLY ITEM PART # Req. DESCRIPTION
1 36085ALVB 2 AIR CYL. ASSEM. - DUAL MF

1 * 2
3
9Q5822
9Q5844
12
12
HH BOLT - 1/4"
1/4" SPRING LOCK WASHER
4 19115VB 2 POPPET O-RING – DUAL MF
2 3 2 5 36083ALVB 1 PRODUCT RETURN ASSEMBLY
6 18832VB 1 PRODUCT RETURN O-RING
3 7 47079AL 1 UNLOADING BODY - DUAL MF
8 47086AL 1 MANIFOLD BODY - DUAL MF
9 9Q3004 4 HH BOLT - 7/16"
4 10 9Q8616 4 7/16" SPRING LOCK WASHER
11 9Z6192 1 GUARD BAR BEARING
16 12 47088AL 1 GUARD BAR SWING ARM
13 9Q8613 1 BRASS WASHER
5 * 9 10 11
14 9Q8614 1 BELLEVILLE WASHER
15 9Q5986 1 HH BOLT 1/2"
6 12
16 75553VB 4 MAIN BODY SEAL – DUAL MF

7 SEAL MATERIAL TEMPERATURE RANGE

FKM ‘BLT’ -20°F to 220°F [-29°C to 104°C]
8 FLUOROSILICONE -50°F to 220°F [-45°C to 104°C]
FKM ‘GFLT-S’ -20°F to 220°F [-29°C to 104°C]

16 MAWP 25 PSI [172 kPa]

BURST PRESSURE 100 PSI [689 kPa]
13 14 15
CONFIGURATION WEIGHT PER COMP.
STANDARD 35 lbs [15.9 kg]
W/ GUARD BAR 38.5 lbs [17.5 kg]
W/ PRODUCT RETURN 36.5 lbs [16.6 kg]
W/ GUARD BAR. & PROD. RETURN 40 lbs [18.1 kg]
W/ G.B, PROD. RET., & API VALVE 55 lbs [25.0kg]

CAUTION: Manifold must be properly installed and maintained per maintenance manual MM-AM001. Failure to do so may result
in damage to the tank and or manifold. Use only genuine Betts Industries Inc. replacement parts. Substitute parts can impair the
proper function of this product.
TM

March 2009

1-210
1
 

36082ALVB – AIR CYLINDER ASSEMBLY, SINGLE MANIFOLD

36085ALVB – AIR CYLINDER ASSEMBLY, DUAL MANIFOLD

ITEM MATERIAL PART NO DESCRIPTION

1A ALUMINUM 36062AL AIR CYLINDER - SINGLE MANIFOLD
1B ALUMINUM 36064AL AIR CYLINDER - DUAL MANIFOLD
2 ALUMINUM 75543AL INDICATOR PIN
3 ALUMINUM 75516AL PISTON
4 FKM 'BLT' 75527VB INSERT O-RING
5 ALUMINUM 19395AL U-SEAL INSERT
6 STEEL ZINC-PLATE 9Q4984 INSERT SNAP-RING
7 304 SS 75525SL SPRING
8A ALUMINUM 28434AL O-RING HOLDER - SINGLE MANIFOLD
8B ALUMINUM 28436AL O-RING HOLDER - DUAL MANIFOLD
9A FKM 'BLT' 18134VB O-RING - SINGLE MANIFOLD
9B FKM 'BLT' 19115VB O-RING - DUAL MANIFOLD
10 POLYURETHANE 75531PY INDICATOR SCRAPER
11 NITRILE 17946BN INDICATOR O-RING
12 NITRILE 75529BN PISTON O-RING
13 NITRILE 19509BN STEM O-RING
14 PTFE W/ 316 SS 19510SSTF U-SEAL
15 STEEL ZINC-PLATE 9Q4983 U-SEAL SNAP-RING
16 ALUMINUM 28441AL INSERT
17 304 SS 28440SL STEM
18 420 SS 9Q5920 ROLL-PIN
* Air cylinder assemblies also available with fluorosilicone (FS) and FKM ‘GFLT-s’ (VF) seals.
** Seal kit for 36082ALVB is 75585VB; seal kit for 36085ALVB is 75586VB. Seal kits replace
items 4, 9, 10, 11, 12, 13, & 14. Kits also available in fluorosilicone and FKM ‘GFLT-s’.

36083ALVB - PRODUCT RETURN ASSEMBLY

ITEM PART NUMBER MATERIAL DESCRIPTION

1 36065AL ALUMINUM PRODUCT RETURN BODY
2 9Q4985 STEEL ZINC-PLATE SCREEN SNAP RING
3 75533SL 304 SS SCREEN
4 9Q4986 STEEL ZINC-PLATE SITE-GLASS SNAP RING
5 75545VB FKM ‘BLT’ SITE-GLASS O-RING
6 75544AC ACRYLIC SITE-GLASS
7 75547SLVB 304 SS W/ FKM ’BLT’ CHECK VALVE POPPET
8 75548SL 304 SS SPRING
9 75542SL 304 SS SHAFT
10 75546AL ALUMINUM BEARING INSERT
11 3645NY NYLON NYLON WASHER
12 9Q8220 STEEL ZINC-PLATE LOCK NUT
13 9Z6196 BRASS W/ FKM AIR VALVE
14 9Z6194 STEEL ZINC-PLATE CHECK VALVE SNAP RING
Product Return also available with fluorosilicone (FS) and FKM ‘GFLT’ (VF) seals.
** Seal kit for 36083ALVB is 75587VB. Kit replaces items 5, 6 & 7. Kit also
available in fluorosilicone and FKM ‘GFLT-s’.

TM

March 2009

1-211
 1
 

28456ALBN GUARD BAR

AIR-CYLINDER ASSEMBLY

ITEM PART NUMBER MATERIAL DESCRIPTION

1 28455SL 303 SS PISTON
2 9Q4929 STEEL ZC-PLATE SNAP-RING
3 75532PY POLYURETHANE PISTON WIPER
4 75317BN NITRILE INSERT O-RING
5 4118BN NITRILE STEM O-RING
6 75536AL ALUMINUM INSERT
7 17946BN NITRILE PISTON O-RINGS
8 75524SL 304 SS SPRING
9 9Z6195 STEEL ZC-PLATE MAGNET
10 28454AL ALUMINUM BODY
11 9Z6198 BRASS FITTING

28480ALBN CONNECTOR SITE-GLASS – 14” CENTERS

28528ALBN CONNECTOR SITE-GLASS – 11” CENTERS

ITEM PART NUMBER MATERIAL DESCRIPTION

1A 28478AL ALUMINUM SITE GLASS CONNECTOR - 14" CENTERS
1B 28508AL ALUMINUM SITE GLASS CONNECTOR - 11" CENTERS
2A 75551AC ACRYLIC SITE GLASS - 14" CENTERS
2B 75560AC ACRYLIC SITE GLASS - 11" CENTERS
3 18283VB FKM ‘BLT’ CONNECTOR BORE SEAL
4 18134VB FKM ‘BLT’ CONNECTOR FACE SEAL
5 18134BN NITRILE SITE GLASS BUSHING O-RING

CONNECTORS AND FASTENERS

ITEM PART NUMBER MATERIAL DESCRIPTION

1 28427AL ALUMINUM STANDARD CONNECTOR – 14” CENTERS
2 28490AL ALUMINUM STANDARD CONNECTOR – 11” CENTERS
3 36067AL ALUMINUM TEE OUTLET CONNECTOR – 14” CENTERS
4 28492AL ALUMINUM TEE OUTLET CONNECTOR – 11” CENTERS
28461AL-* ALUMINUM GUARD BAR – 14” CENTERS
28500AL-* ALUMINUM GUARD BAR – 11” CENTERS
9Q3004 304 SS CONNECTOR BOLTS – 14” CENTERS
9Q5984 304 SS CONNECTOR STUDS – 11” CENTERS
9Q8616 304 SS CONNECTOR LOCK WASHERS
9Q5985 304 SS CONNECTOR NUT – 11” CENTERS
9Q3006 304 SS 4” CONNECTOR BOLT – 11” CENTERS
5 75520AL ALUMINUM CONNECTOR END CAP

* For guard bars, specify number of compartments in part number (Example: 28461AL-4 or 28500AL-3).

TM
March 2009

1-212
1

(Obsolete)

1-213
 1

(Obsolete)

1-214
1

1-215
 1

1-216
1

1-217
 1

1-218
1

1-219
 1

1-220
1
New -  July 2010

This vapor recovery elbow replaces the 1711VL-AL30. All parts on the 80TT are either the same or inter-changeable
with the 1711VL-AL30. Note: The body of the 1711VL-AL30 is NO LONGER AVAILABLE.

 
 

-3" Male Cam and Groove Adapter
80TTA
 - 4" Male Cam and Groove Adapter
80TTF - 3" NPT Female Adapter











 
-






       

     

     
     
     
     
     
     
     
     

1-221
 1
Petroleum Products
Bayco Petroleum Products
Drop Elbows and Accessories
Drop elbows connect to the underground tank fill collar on one end and to the tanker drop hose at the other. They allow convenient
hose connection and prevent hose damage due to kinks. Bayco brand elbows are built tough for consistent positive locking using
solid bronze arms with modular construction for easy, low cost maintenance. Locking mechanisms, cam arms and bottom
assemblies are interchangeable.

4" Drop Elbows

• comes with acrylic sight glass and Buna seals for sight
glass
• bolt-on inlets for easy replacement
• solid bronze locking arms housed in polymer bushings
provide the best bite of any elbows in the market
'A' 'A' • lubrication fitting for locking stem, stem made of stainless
steel
FloTech Overfill Products

'B' 'B' • modular quality cast aluminum construction

• field repair and upgrade are made simple due to modular
design

6200 series 6200X

Part # Description 'A' Overall Height 'B' Ground Clearance
6200 elbow only, without inlet connection 17-3/4" 10-7/8"
6200A elbow with 4" adapter inlet 17-3/4" 10-7/8"
6200AT 1 elbow with 4" adapter inlet and anti-spill sleeve 17-3/4" 10-7/8"
6200B 1 elbow with 3" coupler inlet 17-3/4" 10-7/8"
6200C elbow with 3" adapter inlet 17-3/4" 10-7/8"
6200D elbow with 4" coupler inlet 17-3/4" 10-7/8"
6200RH elbow only, right side lever without inlet connection 17-3/4" 10-7/8"
6200RHA elbow with right side lever with 4" adapter inlet 17-3/4" 10-7/8"
6200T elbow with anti-spill sleeve without inlet connection 17-3/4" 10-7/8"
6200X tall elbow only, without inlet connection 21" 13-3/4"
6200XA tall elbow with 4" adapter inlet 21" 13-3/4"
6200XAT 1 tall elbow with 4" adapter inlet and anti-spill sleeve 21" 13-3/4"
6200XB 1 tall elbow with 3" coupler inlet 21" 13-3/4"
Replacement Parts

6200XC 1 tall elbow with 3" adapter inlet 21" 13-3/4"

6200XD 1 tall elbow with 4" coupler inlet 21" 13-3/4"
6200XT 1 tall elbow with anti-spill sleeve without inlet connection 21" 13-3/4"
1
factory direct
* Note: Please reference page 64 for repair kits and replacement parts.
Elbow Options
• 6000EXT: Extension Kit (page 11) provides extra height for deep fill boxes, kit increases elbow ground clearance by
approximately 3". Can be used with all standard height 6000/6200/6500 series drop elbows.
• 6200SLK: Safety Latch Kit (page 11) locks the side lever of the 6200/6400 series elbows.
• 6200-17: for standard height 6000/6200/6500 series elbows with anti spill sleeve kit (page 11)
• 6200X-17: Anti Spill Sleeve Kit for tall 6200/6500 series elbows (page 11)
• 6000F: Inline strainer for drop elbows

Elbow Inlets
• for 6000, 6000AS, 6200, 6500 elbows
• bolt-on easy to install/replace
• aluminum bodies with bronze cam arms
• comes with stainless steel cap screws (4)

Part # Description
Index

6000-14 4" coupler inlet

6000-15 3" coupler inlet
6000-14 6000-16 6000-20
6000-16 3" adapter inlet
6000-15 6000-17 female
6000-17 4" adapter inlet
female male
6000-20 4" FNPT inlet
VR6000-6 3" adapter outlet for vapor elbows

Dixon Bayco 2010

1-222
1

1-223
 1
Petroleum Products
Bayco Petroleum Products
Coaxial Elbows
• for single point vapor recovery only
• 3" male vapor outlet (top)
• Comes assembled with choice of 3" or 4" adapter or coupler
inlets. Note: 6400 series coaxial inlets will not fit our other
elbow series, please see page 8 for inlets.
• quality cast aluminum construction with solid bronze arms
• bolt-on inlets/outlets for easy, fast replacement
23-3/4" • acrylic sight glass with Buna seals
(6400) • 6400EXT Kit (page 11) raises elbow clearance an
additional 3" to approximately 14¾" when extra height for
deep fill boxes is required.
11-3/4"
(6400) 6400 Series Coaxial Elbow Inlets
Part # Description
6400 elbow with 4" adapter inlet
6400F elbow with 4" coupler inlet
FloTech Overfill Products

6400L elbow with 4" adapter inlet and safety latch

6400FL 1 elbow with 4" coupler inlet and safety latch
6430 elbow with 3" adapter inlet
6430L 1 elbow with 3" adapter inlet and safety latch
26-34" 6430F 1 elbow with 3" coupler inlet
(6400x) 6430FL 1 elbow with 3" coupler inlet and safety latch
6400X tall elbow with 4" adapter inlet
14-3/4" 6400XF tall elbow with 4" coupler inlet
6400XFL 1 tall elbow with 4" coupler inlet and safety latch
(6400X)
6400XL 1 tall elbow with 4" adapter inlet and safety latch
6430X 1 tall elbow with 3" adapter inlet
6430XF 1 tall elbow with 3" coupler inlet
6000-14C 4" coupler inlet, only for 6400 series elbow
6000-15C 3" coupler inlet, only for 6400 series elbow
6000-16C 3" adapter inlet, only for 6400 series elbow
* Note: Please reference page 66 for repair kits and 6000-17C 4" adapter inlet, only for 6400 series elbow
replacement parts. 1
factory direct

Side Seal Drop Elbows

• for use with special 4" side seal style fill collars only
Replacement Parts

• modular, easy repair, bolt-on construction

• comes with acrylic sight glass, Buna seals and bronze arms
• choice of 3" or 4" inlets
• available with anti-spill sleeve (locking ring is available)
Part # Description
6000AS 6000AS without inlet connection
6000ASA 6000AS with 4" adapter inlet
6000ASAT 1 6000AS with 4" adapter inlet and anti-spill tube
6000ASB 1 6000AS with 3" coupler inlet
6000ASC 1 6000AS with 3" adapter inlet
6000ASD 6000AS with 4" coupler inlet
6000ASAL 6000ASA with locking ring
6000ASR locking ring kit
6000AST 1 6000AS with anti-spill sleeve
1
factory direct
* Note: Please reference page 67 for repair kits and
replacement parts.

Side Seal Adapter

• allows conventional top seal elbows to be used with side seal
style fill collars
• bottom connects to side seal collar/top section accepts
Index

standard 4" top seal elbows

Part # Description
6000-SSA side seal adapter
* Note: Please reference page 67 for repair kits and
replacement parts.
Dixon Bayco 2010
1-224
1
Petroleum Products
Bayco Petroleum Products

Vapor Recovery Products

Bayco brand petroleum tanker vapor return products are designed for interchangeability with competitor products and built to the
highest quality standards for trouble-free service. They allow transfer of underground storage tank vapor to the tanker
compartments during the off-loading of petroleum

Vapor Elbows
• for use in two point vapor recovery systems
• choice of 4 models with probe, with & without poppet and
with or without adapter outlet
• one piece bronze locking arms housed in polymer bushings
• advanced design side lever locking system
• Buna seals and stainless steel hardware
• bolt on 3" male outlet included (can rotate for extended life)
• Use VR6000-6 as a replacement 3" adapter for VR6200
model
• VR6200, VR6000, and VR6500 shares a common bottom
FloTech Overfill Products

end with other vapor elbows

• lubrication fitting on locking stem

VR6000NP Note: See 6400 drop elbow (page 10) for single point vapor
recovery coaxial elbow.

Part # Description
VR6000NP VR6000 elbow with 3” adapter outlet, D-type
handle, no poppet valve
VR6100 VR6100 with 3" adapter outlet, push-on style,
includes outlet poppet valve
VR6100NP VR6100 with 3" adapter outlet, push-on style,
without outlet poppet valve
VR6200 VR6200 elbow with 3" adapter outlet, outlet
poppet valve
VR6100 VR6200ANP VR6200 with 4" adapter without poppet
VR6200L 1 VR6200 with safety latch, 3" adapter outlet &
poppet valve
Replacement Parts

VR6200LNP VR6200 with safety latch, 3" adapter outlet

without poppet valve
VR6200LPNP 1 VR6200 with safety latch kit and extension,
3" adapter outlet without poppet valve
VR6200NP VR6200 with 3" adapter outlet without poppet
valve
VR6200NPB 1 VR6200 with 3" coupler outlet, no outlet
poppet valve
VR6200NPBP 1 VR6200 with 3" coupler outlet and extension
kit assembled, not outlet poppet valve
VR6200NPBU 1 VR6200 elbow only, without 3" adapter outlet,
without poppet valve
VR6200
VR6200NPDP 1 VR6200 with 4" coupler outlet and extension
kit assembled, no outlet poppet valve
VR6200PNP VR6200 with 3" adapter outlet, no outlet
poppet valve with extension kit
VR6500 VR6500 elbow with 3" adapter outlet,
includes outlet poppet valve
VR6500NP VR6500 elbow with 3" adapter outlet, without
outlet poppet valve
VR6500LPNP VR6500 with safety latch, 3" adapter outlet
without poppet valve & extension kit
Index

assembled
1
factory direct
• Elbow inlets can be found on page 8
* Note: Please reference pages 68, 69, 70 and 71 for repair kits
VR6500 and replacement parts.

Dixon Bayco 2010

1-225
 1

1-226
1

1-227
 1

1-228
1

1-229
 1

F298

Product Drop Elbow Co-Axial for Product And Vapor

FEATURES AND BENEFITS

DROP ELBOW
• Lightweight aluminum.
• Excellent flow rate.
• Sight glass in product port allows inspection
of product flow.
• Sight glass protected by aluminum body.
Prevents damage when stored in tool box.
• Can be subjected to pump off pressure
(versus gravity unloading) to 25psi.
• Product connection (3" or 4" cam & groove)
is located below vapor connection (3" cam &
groove) reduces stress on adapter, piping
and connection to tank.
• No vapor emission or product leak.
Special seal assures tight connection.
• Quick and easy to rebuild.
• Option: Interlock available to assure vapor
connection prior to product connection.
• Most parts interchangeable with F523
and F77.

VARIANTS 15.06"
(382.52mm)

PART NO. DESCRIPTION WEIGHT

F298-004 4" x 3" with Interlock 18.25 lbs.

F298-006 4" x 3" less Interlock 17.75 lbs. 15.06"
F298-007 4" x 3" less Interlock, with 17.75 lbs. (382.52mm)

4" FNPT Product Connection.

F298-008 3" x 3" with Interlock, Buna 17.25 lbs.
F298-009 3" x 3" less Interlock, Buna 16.75 lbs. 22.31"
(382.52mm)

10.5"
(266.7mm)

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-230
1
F298

Product Drop Elbow Co-Axial for Product And Vapor

27

26
24
25 22
23
21

20 19 18
17
16

14 14a

17

4
12 15 SPECIFICATIONS
11 13
ITEM
9 NO. DESCRIPTION QTY. MATERIAL
3

8 1 Cam, right hand 1 408615 Bronze Plated

2 Cam, left hand 1 408617 Bronze Plated
10 3 Handle 1 562246 Aluminum
2
7 4 Roll Pin 1 470078 Steel
1
6 5 Seal 1 561566 Buna
5 6 Coupler Tube 1 561641 Aluminum
7 Gasket 1 408604 Buna
8 Screw, 1/4"-20 x .75 1 562236 Steel
9 Body 1 561640 Aluminum
10 O-ring 1 561868 Buna
11 Hex Nut, 5/16"-18 8 403150 Steel/Cad
12 Lockwasher, 5/16" 8 470034 Steel/Cad
13 Spacer 4 561567 Aluminum
14 4" Male NPT Adapter 1 561558 Aluminum
14a 4" Female NPT Adapter 1 564218 Aluminum
15 Screw, 5/16-18 x 2 1/4" 4 447380 Steel
16 Tetraseal 2 561814 Buna
17 Sight Glass 1 561568 Acrylic
18 Interlock Piston 1 561556 Nylon
19 Interlock Body 1 561555 Nylon
20 Spring 1 409325 Steel
21 Screw, 1/4"-20 x .5" 3 447459 Stainless Steel
22 Interlock Latch 1 561570 Aluminum
23 Pin 1 404840 Steel
24 Spring 1 409340 Stainless Steel
25 Screw, 5/16"-18 x 1 1/4" 4 452345 Steel/Cad
26 3" Vapor Adapter 1 409312 Aluminum
27 Vapor Gasket 1 562239 -
O Sight Glass Kit 1 562249 -
O Coupling Tube Kit 1 562250 -

printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-231
 1

F523

4" Product Drop Elbow

FEATURES AND BENEFITS

DROP ELBOW
• Industry’s lightest 4" x 4" product
drop elbow.
• Excellent flow rate.
• Simple and reliable cam design.
Minimum number of moving parts.
• Easy and quick to rebuild.
• Two piece construction allows
change of connector size and style.
• Sight glass is protected by
aluminum body. No damage when
stored in tool box.
• Most parts interchangeable with
F298 and F77.

VARIANTS
PART NO. DESCRIPTION WEIGHT

F523-006 4" x 4" Cam & Groove 13.00 lbs.

F523-007 4" x 4" FNPT 13.00 lbs.
F523-008 4" x 3" Cam & Groove 12.94 lbs.
F523-009 4" x 3" FNPT 12.94 lbs.

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-232
1
F523

4" Product Drop Elbow

1c
8 9 1b
1
1a 10

6 7

11

13
5

12

2
3

SPECIFICATIONS
ITEM
NO. DESCRIPTION QTY. MATERIAL

1 4" Cam & Groove Adapter 1 561558 Aluminum

1a 4" FNPT Adapter 564218 Aluminum
1b 3" Cam & Groove Adapter 565233 Aluminum
1c 3" FNPT Adapter 565235 Aluminum
2 Cam, right hand 1 408615 Aluminum & Bronze
3 Cam, left hand 1 408617 Aluminum & Bronze
4 Handle 1 562246 Aluminum
5 Pin 1 470078 Stainless Steel
6 Hex Nuts, 5/16-18 4 403150 Steel
7 Lockwashers, 5/16 4 470034 Steel
8 Spacers 4 561567 Aluminum
9* Sight Glass 1 561568 Acrylic
Sight Glass Kit 1 562249 Acrylic
10 Hex Cap Screws 4 447380 Steel Plated
11* Tetraseals 2 561814 -
12 Gasket 1 408604 Buna
13 Body 1 565231 Aluminum

*In Kit
printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-233
 1

F77

4" Vapor Drop Elbow

FEATURES AND BENEFITS

DROP ELBOW
• Industry's lightest 4"x 4" vapor drop elbow.
• Low pressure drop, ensuring high product
flow rates.
• Available with and without internal poppet
assembly.
• Simple and reliable cam design. Minimum
number of moving parts.
• Easy and quick to rebuild.
• Two piece construction allows change of
hose connection size and style.
• Most parts interchangeable with F298
and F523.

VARIANTS
PART NO. DESCRIPTION WEIGHT

F77-007 4" x 3" Cam & Groove, Poppeted 13.06 lbs.

F77-008 4" x 3" FNPT, Poppeted 13.06 lbs.
F77-009 4" x 3" Cam & Groove, Non-Poppeted 12.62 lbs.
F77-010 4" x 3" FNPT, Non-Poppeted 12.62 lbs.
F77-011 4" x 4" Cam & Groove, Poppeted 13.06 lbs.
F77-012 4" x 4" Cam & Groove, Non-Poppeted 12.62 lbs.

ISO 9001
CERTIFIED

4/01 A SYLTONE COMPANY

FM 40350

1-234
1
F77

4" Vapor Drop Elbow

1b
1a
10

SPECIFICATIONS ITEM
NO. DESCRIPTION QTY.

1 3" Cam & Groove Adapter 1 565233

1a 3" FNPT Adapter 565235
1b 4" Cam & Groove Adapter 561558
2 Cam, right hand 1 563435
3 Cam, left hand 1 563436
4 Handle 1 562246
5 Roll Pin 1 470078
6 Hex Nuts 4 403150
7 Lockwashers 4 470034
8 Body 1 565868
9 Retaining Ring 1 409350
10 Hex Cap Screws 4 444518
11 Vapor Gasket, Buna 1 565869
12 Gasket, Buna 1 408604
13 Internal Poppet Assembly 1 492901
14 Disc Top Plate 1 577020
15 Disc, Buna 1 577021
16 Poppet Guide 1 563455
17 Disc Bottom Plate 1 577019
18 Hex Head Screw 1 444514
19 Spring 1 409560
20 Spring Retainer 1 563456
21 Retaining Ring 1 563461
22 Plunger 1 563638 printed on recycled paper

LOADING AND UNLOADING THE WORLD

1-235
 1
Transport
Systems PRODUCT DROP ELBOWS

Dual Point Vapor Recovery Elbow

This durable cast aluminum elbow ensures complete vapor recovery for dual point Features
systems, and can be ordered with a variety of different adapters to meet any
requirement. The simple four bolt flange design allows for easy replacement of Cast aluminum.
adapters over competitive threaded styles. Its low profile design allows for convenient Compact, low profile design.
storage and the specially designed quick grip one hand operation handle allows for Four bolt flange pattern.
easy on and off attachments.
Protective base shield.

880-4-0

18
(457.20)

11.94
(303.21)

9.25
(234.95)

model Unit 880-40 880-4-0

Size (Inches/Millimeters) — 3/76.2
Weight (Pounds/Kilograms) 11/4.99 12.38/5.62

Dimensional Drawing

1-236
1
Transport
PRODUCT DROP ELBOWS Systems

Dual Point Vapor Recovery Elbow Parts List

7.62 13 12 11 10
(193.54)

18.02
(457.70)

2
3
4

9 6
8
7
7.83 9.25 6.62
(198.88) (234.95) (168.14)

# Part name Part nUmber # Part name Part nUmber

1 #10 - 24 × ½ Socket Head Cap Screw 11170-12 8 Locking Cam 880-245-01
2 Handle Retainer Block 880-246-01 9 Grooved (Straight) Pin 11126-01
3 Vapor Elbow Body 880-469-01 10 Adapter Flange Gasket 880-247-01
Screw - 5/16-18 × 1 Hex Head
4 Pressure Sensitive (Warning) Label 880-107-01 11 Stainless Steel 11176-20
5 Vapor Elbow Locking Bar 880-391-01 12 3” Coupling Adapter 880-396-01
6 Grooved (Straight) Pin 11126-07 13 3” NPT Adapter 880-397-01
7 Elbow Seal 870-200-01

Part nUmber desCriPtion

880-460-01 Body Only
880-465-01 3” Male Cam & Groove Adapter
880-465-02 3” Male NPT Adapter

880-465-01

Dual Point Vapor Recovery Elbow

1-237
 1
Transport
Systems SIDE SEAL ADAPTER

The Side Seal Adapter is designed to give flexibility to top seal drop elbows. Your 4” Features
top seal delivery elbow can now be used on a side 4” seal fill adapter. You don’t have
to bring a separate side seal elbow, which reduces cost and the number of fittings Designed for use with 4” side seal
service station fittings.
required on your truck.
Lightweight.
Two lever clamps secure the adapter to the station’s side seal fitting and allow a 4”
elbow to attach to the adapter. Special locking rings prevent accidental cam arm Cast aluminum body.
release during filling. Cast aluminum makes the side seal adapter light and strong. Special innovative seal design.
The specially designed seal gives you the added insurance that no leaks will occur. No separate side seal elbow to
transport.
880-44-0
Locking rings to prevent
4.65 accidental cam arm release during
filling.

model Unit 880-44-0

Weight (Pounds/Kilograms) 10.0/4.58

8.94

6.25

Side Seal Adapter Parts List

4.85

6
5

8.94

3
2
1

6.25 5.94

# Part name Part nUmber # Part name Part nUmber

1 Seal 881-202-01 5 Pin, 0.125 × 0.875, Groove Type “E” 11459-01
2 Release Lever Spring 881-103-01 6 Release Lever 881-200-01
3 Pin, 0.187 × 1.500, Groove Type “C” 11126-08 7 Side Seal Adapter Body 880-446-01
4 Release Lever Interlock 881-201-01

Part nUmber desCriPtion

880-445-01 Side Seal Adapter

1-238
1
Morrison Bros. Co.

1-239
 1

CAST SERIES

1-240
1 PART #H32138PA
November 2008

1700ESL Kamvalok® Coupler

OPW Transport Series Dry Disconnect Couplings are
considered the standard of the industry. For use on
multi-compartment petroleum, solvent and chemical
product delivery trucks with an on-board pumping unit.
BENEFITS
Spill Protection – Helps to reduce the hazards involved in
the connection/disconnection process of transferring
hazardous materials.
Provides For Total Closed-Loop Loading Capabilities –
Keeps hazardous liquids and vapors in-line and out of the
environment.
Dual Protection – Poppeted seal cylinder design provides
automatic closure from both directions – the coupler and
the adaptor – to avoid accidental spills.
Autolok™ Locking Arms – Provide added protection with
an automatic locking mechanism signaled by a positive 1700ESL
click. Uncoupling requires only an easy tug on the lock Transport Series
release. Dry Disconnect
Couplings
SST Locking Lever Assembly – Locks in position to
prevent accidental opening or closing of valve.
Ease of Use – Built-in elbow swivel and simple connection
and disconnection design provides freedom of movement
and smooth operation.

ORDERING GUIDE
CUSTOMER SERVICE
Type Configuration Size
17 - Coupler 1 - Aluminum Body, Stainless Steel Internals 20 - 2" FNPT Call OPW
Customer Service at
800-547-9393 for
complete ordering
1711ESL - AL20 information.
O-Ring Seal Style Construction
1 - Buna-N Elbow Swivel Material
2 - Fluorocarbon AL - Aluminum Body
4 - EPDM

DESIGN PARAMETERS

Design Standard Size ASME B31.3

Max. Design Temp 2" 200° F (93° C)

Min. Design Temp 2" -20° F (-29° C)

Max. Design Pressure 2" 150 PSI (10.5 BAR)

ES-1700ESL • 11/08 • 0M

© Copyright 2008 OPW Engineered Systems

1-241
 1
1700ESL Kamvalok Coupler ® 1700ESL MAINTENANCE

MATERIALS

Materials Aluminum (250°F /121°C) Seal Options Repair Kit Temperature Rating
Body, Poppet A356-T6 ASTM B-26 Buna-N 1711ERKL-0020 -20° F – 212° F
(-29° C – 100° C)
Cam Arms ASTM A351 CF8M 316 SST
Seal Cylinder 6061-T6 Fluorocarbon 1712ERKL-0020 -20° F – 400° F
Shaft ASTM A479 Ferralium 255 SST (-29° C – 204° C)
Seals See Chart
EPDM 1714ERKL-0020 -50° F – 250° F
Poppet Link A351 CD4MCU Duplex SST (-46° C – 121° C)
Shaft Link A351 CD4MCU Duplex SST

PART NUMBERS

# Description Qty 1711ESL 1712ESL 1714ESL RK

1 Lever Assembly 1 H32040 H32040 H32040
2 Shaft 1 C21123RE C21123RE C21123RE
3 Spacer 1 H32030RE H32030RE H32030RE
4 Groove Pin, Cam Arm 2 H20141M H20141M H20141M
5 Autolok Arm Assy 1 733ARK-SS20 733ARK-SS20 733ARK-SS20
6 Body 1 C21131A C21131A C21131A
7 O-Ring, Main Seal 2 H06223M H01076M H06142M +
8 Spring 1 H04328M H04328M H04328M
9 Gasket 1 H20545M H00974M H20537M +
10 Guide, Seal Cylinder 1 H31540M H31540M H31540M +
11 Seal Cylinder 1 H31543A H31543A H31543A +
12 Nose Seal 1 H31528M H31531M H31534M +
13 Nut, Shaft 1 H32111M H32111M H32111M
14 Lock Washer Shaft 1 H31920M H31920M H31920M
15 O-Ring, Shaft 2 H20129M H20175M H20176M +
16 StuffingBox 1 C20812RE C20812RE C20812RE
17 O-Ring, Stuffingbox 1 H31705M H31706M H31707M +
18 Shaft Link 1 9C21125EW 9C21125EW 9C21125EW
19 Clevis Pin 2 H31692M H31692M H31692M
20 Poppet Link 1 9C21124EW 9C21124EW 9C21124EW
21 Cotter Pin 2 H04981M H04981M H04981M +
22 Poppet 1 C21129A C21129A C21129A
23 Bearing 1 H05096M H05096M H05096M +
24 Back Up Ring 1 H05155M H20617M HX91574 +
25 Bearing 1 H05097M H05097M H05097M +
26 Washer 1 H05100M H05100M H05100M +
27 Flange 4 H05095RS H05095RS H05095RS
28 Lock Washer 4 H20441M H20441M H20441M
29 Screw 4 H03657M H03657M H03657M
30 Elbow 1 C01345A C01345A C01345A
+Items included in repair kits
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.

1-242
1
1700ESL Kamvalok® Coupler 1700ESL MAINTENANCE
MAINTENANCE

2" O-Ring, Main Seal Gasket Nose Seal O-Ring, Shaft O-Ring, Stuffingbox

Buna-N H06223M H20545M H31528M H20129M H31705M

Fluorocarbon H01076M H00974M H31531M H20175M H31706M

H20537M
EPDM H06142M H31534M H20176M H31707M

Installation Preparations: Read & understand these Caution: All OPW products have literature that
instructions before starting installation or indicates the maximum service conditions for the
dismantling:
unit. This information must be reviewed prior to
• Coupler to be used for its designated purpose installation and start-up. If there is any doubt of
only applicability for operation in a system under actual
• Local regulations for (un)loading must be service conditions, consult the factory before
followed at all times placing in service.
• Product flow may result in static electricity;
grounding of equipment is required
• OPW instructions must be followed for Caution: Do not attempt any maintenance/
installation or dismantling at all times service while the equipment is in operation. System
• Make sure to use adequate personal protection pressure must be relieved and the product drained
at all times during operation before attempting any service on the unit. The line
• Secure whatever device Coupler will be must be locked out while service is in progress.
mounted to (e.g. Loading Arm, hose, etc.) Read the operating instructions in the maintenance
• Thread coupler onto pipe (use proper thread manual before using or servicing this product.
sealant) Failure to do so could result in serious personal
injury, property damage or product failure.
MAINTENANCE
Attention: The same risks and procedures of initial
installation apply. Caution: Do not drop OPW products onto hard
surfaces. Chipping and deformation of the product
Specific Warnings: may occur. Repeated mishandling of the product
• Remove pressure from the system before could result in personal injury, property damage or
attempting to remove coupler product failure.
• Secure piping before attempting to remove
coupler
Warning: OPW products do not eliminate
Consider the following when servicing the Coupler: possible exposure to hazardous substances. The
conditions of handling and use are beyond our
• When Coupler is over-pressurized, it must be
control, and we make no guarantee and assume no
inspected thoroughly
liability for damages or injuries related to the use of
• After maintenance is performed, it must be
our products. Follow the safety precautions outlined
tested before the next use (see Testing After
Servicing) in the Material Safety Data Sheets for the material
• Periodic inspection (every 3 months) for being used. It is the responsibility of the user to
leakages (especially with toxic or hazardous comply with all federal, state and local regulations.
mediums) Always employ proper safety precautions and
• Maintenance must be performed by authorized handling techniques. Failure to do so could result in
personnel serious personal injury, property damage or
• Periodic maintenance (once a year) is required product failure.
according to the maintenance instructions
• In case of (parts of) couplers being redirected,
the initiator must provide information about the Warning: Proper seal and wetted material part
mediums, which have been in contact with (parts selection is critical for safe operation. To assure
of) the coupler maximum life for the service intended, use only
• During maintenance those materials compatible with the fluids being
(partial) dismantling handled. Please note material being supplied and
could be necessary, make certain that it is suited for the intended
the same risks and service. Failure to do so could result in serious
procedures apply personal injury, property damage or product failure.

© Copyright 2008, OPW Engineered Systems

1-243
 PART #H32116PA
February 2009
1

Kamvalok Dry Disconnect Couplings ®

OPW Kamvalok® Dry Disconnect Couplings are

considered the standard of the industry. Used at
liquid transfer points where product loss could occur,
OPW Kamvaloks® provide a reliable solution to
prevent spillage during connection or disconnection.

BENEFITS
Spill Protection
Helps to reduce the hazards involved in the
connection/disconnection process of transferring hazardous
materials.
Provides for Total Closed-Loop Loading Capabilities
Keeps hazardous liquids and vapors in-line and out of the
environment.
Dual Protection
Provides automatic closure from both directions – the coupler and
the adaptor.
Autolok™ Locking Arms
Provides added protection with an automatic locking mechanism
signaled by a positive click. Release requires only an easy tug on
the lock release.
SST Locking Lever Assembly
Locks in both the opened and closed positions to prevent 1700DL
accidental release or uncoupling. Dry Disconnect Couplings
Ease of Use
Simple connection and disconnection design provides for smooth
and easy operation.

ORDERING GUIDE
Type Configuration Size
17 - Coupler 1 - Aluminum Body, Stainless Steel Internals 15 - 1-1/2" DN40
7 - Stainless Steel Body, Stainless Steel Internals 20 - 2" DN50
30 - 3" DN80

1711DL - AL15 - GL
O-Ring Seal DL - FNPT Construction Style
DBL-FBSPT
1 - Buna-N Material A - 150 Lb. Flange
2 - Viton®-A AL - Aluminum Body GL - Greaseless
3 - TFE/Silicone Core/Chemraz SS - Stainless Steel Body KG- Krytox Grease
4 - EPT KL - Keylok
6 - Chemraz P - Sanitary Triclamp
T - 300 Lb. Flange
DESIGN PARAMETERS

Design Standard Size ASME B31.3 ASME B31.3

Max. Design Temp ALL See Material Section See Material Section
Min. Design Temp ALL See Material Section See Material Section
1- ⁄2"
1
15 Bar 210 psi
Max. Design Pressure 2" 10.5 Bar 150 psi
3" 8.5 Bar 120 psi
© Copyright 2009 OPW Engineered Systems

ES-1772DL • 02/09 • 0M

1-244
1
Kamvalok
®
Dry Disconnects KAMVALOK® MAINTENANCE

Materials Aluminum (250° F/121° C Max Temp) SST (see seal chart)
Body, Poppet A356-T6 ASTM B-26 ASTM A351 CF3M 316L SST
Cam Arms ASTM A351 CF8M 316 SST ASTM A351 CF8M 316 SST
Seal Cylinder 6061-T6 A351 CD4MCU Duplex SST
Shaft ASTM A479 Ferralium 255 SST ASTM A479 Ferralium 255 SST
Seals See Chart See Chart
Poppet Link A351 CD4MCU Duplex SST A351 CD4MCU Duplex SST
Shaft Link A351 CD4MCU Duplex SST A351 CD4MCU Duplex SST

Seal Options / Kits Mat’l 1 ½" 2" 3" Temperature Rating

Buna-N1500 AL 1711RKL-0015 1711RKL-0020 1711RKL-0030 -20º F – 250º F
SST 1771RKL-0015 1771RKL-0020 1771RKL-0030 (-29º C – 121º C)
Viton® AL 1712RKL-0015 1712RKL-0020 1712RKL-0030 -20º F – 400º F
SST 1772RKL-0015 1772RKL-0020 1772RKL-0030 (-29º C – 204º C)
Teflon® AL 1713RKL-0015 1713RKL-0020 1713RKL-0030 -15º F – 400º F
SST 1773RKL-0015 1773RKL-0020 1773RKL-0030 (-26º C – 204º C)
EPT E692 AL 1714RKL-0015 1714RKL-0020 1714RKL-0030 -50º F – 225º F
SST 1774RKL-0015 1774RKL-0020 1774RKL-0030 (-46º C – 107º C)
Chemraz 505 AL 1716RKL-0015 1716RKL-0020 1716RKL-0030 -15º F – 400º F
SST 1776RKL-0015 1776RKL-0020 1776RKL-0030 (-26º C – 204º C)

# Description Qty 1-1/2" 2" 3" RK

PART NUMBERS
1 LEVER ASSEMBLY 1 H32040 H32040 H32040
2 SHAFT 1 C21119RE C21123RE C21112RE
3 SPACER 1 H32031RE H32030RE H32032RE
4 GROOVE PIN, CAM ARM 2 H20141M H20141M H20144M
5 AUTOLOK™ ARM ASSEMBLY 1 733ARK-SS20 733ARK-SS20 733ARK-SS30-PADDLE
6 BODY 1 C21120A (EW) C21128A (EW) C21113A (EW)
7 O-RING, MAIN SEAL 1 See Seal Options See Seal Options See Seal Options +
8 SPRING 1 H06128M H04328M H10352M
9 GASKET 1 See Seal Options See Seal Options See Seal Options +
10 GUIDE, SEAL CYLINDER 1 H31539M H31540M H31541M +
11 SEAL CYLINDER 1 H31542A (EW) H31543A (EW) H31544A (EW) +
12 NOSE SEAL 1 See Seal Options See Seal Options See Seal Options +
13 NUT, SHAFT 1 H32111M H32111M H32111M
14 LOCK WASHER, SHAFT 1 H31920M H31920M H31920M
15 O-RING, SHAFT 2 See Seal Options See Seal Options See Seal Options +
16 STUFFINGBOX 1 C20812RE C20812RE C20812RE
17 O-RING, STUFFINGBOX 1 See Seal Options See Seal Options See Seal Options +
18 SHAFT LINK 1 9C21118EW 9C21125EW 9C21111EW
19 CLEVIS PIN 2 H31692M H31692M H31688M
20 POPPET LINK 1 9C21117EW 9C21124EW 9C21110EW
21 COTTER PIN 2 H04981M H04981M H04981M +
22 POPPET 1 C21121A (EW) C21129A (EW) C21115A (EW)
23* GUIDEBEARING 1 N/A N/A H32118M +
NOTE: eplaces
(EW) R A for SST Fittings + Items included in repair kits
*NOTE: Not
howns

IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.

1-245
 1
Kamvalok
®
Dry Disconnects KAMVALOK MAINTENANCE
®

SEALS

1 ½" O-Ring, Main Seal Gasket Nose Seal O-Ring, Shaft O-Ring, Stuffingbox
Buna-N1500 H03051M H20544M H31527M H20129M H31705M
Viton® H03070M H00973M H31530M H20175M H31706M
Teflon ®
H20184M H07904M H31536M H20522M H31708M
EPT E692 H03596M H20536M H31533M H20176M H31707M
Chemraz 505 H20688M H20687M H31536M H20522M H31708M

2" O-Ring, Main Seal Gasket Nose Seal O-Ring, Shaft O-Ring, Stuffingbox
Buna-N1500 H06223M H20545M H31528M H20129M H31705M
Viton® H01076M H00974M H31531M H20175M H31706M
Teflon ®
H20185M H07905M H31537M H20522M H31708M
EPT E692 H06142M H20537M H31534M H20176M H31707M
Chemraz 505 H20552M H20624M H31537M H20522M H31708M

3" O-Ring, Main Seal Gasket Nose Seal O-Ring, Shaft O-Ring, Stuffingbox
Buna-N1500 H05152M H20265M H31529M H20129M H31705M
Viton ®
H05136M H20131M H31532M H20175M H31706M
Teflon® H20186M H31562M H31538M H20522M H31708M
EPT E692 H10209M H20266M H31535M H20176M H31707M
Chemraz 505 H20715M H20714M H31538M H20522M H31708M

INSTALLATION PREPARATIONS

WARNING: Read & understand these instructions before

starting installation or dismantling:
• Coupler to be used for its designated purpose only
• Local regulations for (un)loading must be followed at all
times
• Product flow may result in static electricity; grounding of
equipment is required
• OPW instructions must be followed for installation or
dismantling at all times
• Make sure to use adequate personal protection at all
times during operation
• Secure whatever device coupler will be mounted to
(e.g. loading arm, hose, etc.)
• Thread coupler onto pipe (use proper thread sealant)

MAINTENANCE

ATTENTION: The same risks and procedures of initial • Maintenance must be performed by authorized
installation apply. personnel
Consider the following when servicing • Periodic maintenance (once a year) is required
according to the maintenance instructions
the coupler:
• In case of (parts of) couplers being redirected, the
• When coupler is over pressurized, it must be initiator must provide information about the
inspected thoroughly mediums, which have been in contact with (parts of)
• After maintenance is performed, it must be tested the coupler
before the next use (see Testing After Servicing) • During maintenance, (partial) dismantling could be
• Periodic inspection (every 3 months) for leakages necessary; the same risks and procedures apply
(especially with toxic or hazardous mediums)

© Copyright 2008, OPW Engineered Systems

1-246
1

1-247
 1

1-248
1

1-249
 1

1-250
1

1-251
 1

1-252
1

1-253
 1

1-254
1

1-255
 1

1-256
1

1711GC

1-257
 1

1-258
1

1-259
 1

1-260
1

1-261
 1

1-262
1

1-263
 1

1-264
1

1-265
 1

1-266
1

1-267