TOP Oil

Carr. Monterrey Km.104, Col. Casa Bella

Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

TOP
IL SERVICES
TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
Tel (899) 925 2747, Fax (899) 923 4308

Mangueras y Conexiones TOP Oil Services

TOSC-0004 Página 1de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Table of Contents

Choke and Kill Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BOP Control Line Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Grade D Rotary and Vibrator Hose • API 7K-0060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Grade E Rotary and Vibrator Hose • API 7K-0060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Medium Pressure Slim Hole Rotary Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 7
Mud Pump Suction Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . 8
Four Spiral Hydraulic Hose • 4SH DIN EN 856 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Six Spiral Hydraulic Hose • SAE 100R13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 10
One Wire Hydraulic Hose • 1 SN DIN 853 Exceeds 100R1AT . . . . . . . . . . . . . . . . . . . . . . . . . ... .. 11
Two Wire Hydraulic Hose • 2 SN DIN 853 Exceeds 100R2AT . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 11
H069 Hydraulic Hose • SAE 100R5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .. . . 12
H430 Very High Pressure Hydraulic Hose • SAE 100R12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Oilfield Vacuum Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . 13
Black Rubber Suction Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tank Truck Hose • 150 PSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tank Truck Hose • 250 PSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Hot Air Blower Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 15
Dry Bulk Material Handling Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Gold Series High Pressure Air Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Potable Water Hose . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Steam Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . 17
MWH Push-On Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pressure Washer Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Liquid Mud Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Frac Tank Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Yellow Wire Braid Air Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Metal Hose Series 300 and 800 • ISO 10380 Qualified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . 20
Kevlar, Mud Pump and D Series Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Other Related and Specialty Products

Mangueras y Conexiones TOP Oil Services

TOSC-0004 Página 2de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Choke and Kill Hose (Oilfield Hose)

Description
The choke and kill hose is manufactured with premium components.

Others
Features

 .031 Walls on Armor.

Construction

 Reinforcement: Two or four high strength

steel cables
 Cover: Ozone, petroleum and abrasion re-
sistant
 Thermal Blanket: 1500°F continuous rating,
non-flammable and non-conductive Descripción / Description
 Inner Tube: Petroleum resistant for oil
Diam. Ext.
based drilling fluids Diam. Inter. Presión de Presión de Peso por pie
Manguera /
Manguera / Hose Trabajo / Work Prueba / Test / Wt. Per Ft
 End Fittings: API Male nipples, threaded or Hose O.D.
I.D. (inch) Press (PSI) Press (PSI) (lbs.)
butt weld hammer unions, unbolts, API (inch)
flanges and other special connections. 2 1/2 6 5,000 10,000 15.0
 Certification: API 7K 3 6 1/4 5,000 10,000 17.5
Maximum Length: 110 feet 3 1/2 6 1/2 5,000 10,000 20.0
Operating Temperatures: -22°F to 200°F (- 4 8 5,000 10,000 28.0
30°C to 93°C) 2 1/2 7 10,000 15,000 22.0
Option: Available with Stainless Steel armor 3 7 3/4 10,000 15,000 30.0
and fire protection 3 1/2 8 10,000 15,000 32.0
4 9 10,000 15,000 36.0
 End Connection: Good for H2S service.

Information in this sheet is subject to change without notice.

Typical Application

 Specific design for flexible connection be-

tween the Riser and Manifold

Mangueras y Conexiones TOP Oil Services

TOSC-0004 Página 3de 21
 TOP
IL SERVICES

BOP Control Line Hose

Description
The BOP control line is manufactured with only premium components.
The Stainless Steel armor is heavy duty .015 gauge for those tough oilfield applications.
A special Carbon or Stainless Steel nipple with a large hex and longer threads allows for easy and
complete installation of hammer unions. Choose the Midwest Hose Brand BOP control lines for
your demanding applications.

Others
Features Descripción / Description
Diam. Ext.
 . Safety Factor (Hose): 4:1 Diam. Inter.
Manguera /
Presión de Presión de Peso por pie
Manguera / Hose Trabajo / Work Prueba / Test / Wt. Per Ft
Hose O.D.
I.D. (inch) Press (PSI) Press (PSI) (lbs.)
(inch)
Construction
1 2 1/16 5,000 20,000 2.75
 Armor : .015 heavy duty Stainless Steel. 2 3 1/2 5,000 20,000 8.25

 Armor Wall: .031 wall thickness.

 Thermal Blanket: 1500°F continuous rating, non-

flammable, and non-conductive.

 End Connection: 303 Stainless Steel with extra

long hex (Carbon Steel also available).

 Armor Ferrule: 316 Stainless Steel (Carbon Steel

also available).
Information in this sheet is subject to change without notice.

Typical Application
 For oilfield BOP hydraulic control line hose con-
nections.
Also available in 1/2", 3/4", 11/4" and 11/2" sizes

Page 4of 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Grade D Rotary and Vibrator Hose • API 7K-0060

Description
The Grade D rotary and vibrator hose is manufactured with the highest quality material to handle the tough
drilling applications of today’s industry..

Others
Features

 API 7K-0060

Construction

 Reinforcement: Two high

strength steel cables
 Cover: Ozone, petroleum and
abrasion resistance
 Tube: Oil resistant for petroleum Descripción / Description
drilling fluids
Diam. Ext.
 End Fittings: API male nipples, threaded or Diam. Inter.
Manguera /
Presión de Presión de
buttweld hammer unions, unibolt, API flang- Manguera / Hose Trabajo / Work Prueba / Test Bend Radius
Hose O.D.
I.D. (inch) Press (PSI) Press (PSI)
es and other special connections. (inch)
 Certification: API 7K-0060 2 1/2 4.4 5,000 10,000 2.3
 Maximum Length: 110 feet 3 4.9 5,000 10,000 2.6
 Operating Temperatures: -22°F to 200°F (- 3 1/2 5.5 5,000 10,000 2.9
30°C to 93°C) 4 6.5 5,000 10,000 3.9
 Options: Available with S.S. armor and fire
protection.. Information in this sheet is subject to change without notice.

Typical Application

 Mud delivery hose, motion compensator

hose, de-coking hose.
 Oilfield, construction, mining and high per-
formance industrial equipment

Mangueras y Conexiones TOP Oil Services

Information in this sheet is subject to change without notice Página 5de 21
 TOP
IL SERVICES

Grade E Rotary and Vibrator Hose • API 7K-0060

Description
The Grade E rotary and vibrator hose is manufactured with the highest quality material to handle the tough
drilling applications of today’s industry.

Others
Features

 API 7K-0060

Construction

 Reinforcement: Four high

strength steel cables
 Cover: Ozone, petroleum and
abrasion resistance
 Tube: Oil resistant for petroleum
drilling fluids
 End Fittings: API male nipples, threaded or buttweld hammer
unions, unibolt, API flanges and other special connections.
 Certification: API 7K-0060
 Maximum Length: 110 feet
 Operating Temperatures: -22°F to 200°F (-30°C to 93°C)
 Options: Available with S.S. armor and fire protection.

Typical Application

 Mud delivery hose, motion compensator hose, de-coking hose.

 Oilfield, construction, mining and high performance
industrial equipment.

Descripción / Description
Diam. Ext.
Diam. Inter. Presión de Presión de
Manguera /
Manguera / Hose Trabajo / Work Prueba / Test Bend Radius
Hose O.D.
I.D. (inch) Press (PSI) Press (PSI)
(inch)
2 1/2 5.34 7,500 15,000 2.6
3 5.83 7,500 15,000 3.6
3 1/2 6.38 7,500 15,000 4.3
4 6.85 7,500 15,000 4.6
Information in this sheet is subject to change without notice.

Mangueras y Conexiones TOP Oil Services

TOS0004 Page 6of 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Medium Pressure Slim Hole Rotary Hose

Description
The medium pressure slim hole rotary hose is manufactured with only premium components.
The reinforcement cables, inner liner, and cover are made of the highest quality material to handle the tough
drilling applications of today’s industry. The API male nipples are standard while threaded or buttweld ham-
mer unions and other special connections are available upon request.

Others
Features

 . Safety Factor (Hose): 4:1

Construction
 Reinforcement: Two high strength steel
cables
 Cover: Ozone resistant, petroleum re-
sistant,
and abrasion resistant
 Tube: Petroleum resistant for oil
based drilling fluids
 End Fittings: Male nipples, threaded or butt weld hammer Descripción / Description
unions, unibolt, flanges and other special connections. Diam. Ex t. Presión de Peso por
 Maximum Length: 110 feet Diam. Inter.
Manguera / Trabajo /
Presión de
pie / Wt.
 Operating Temperatures: -22°F to 180°F (-30°C to 82°C) Manguera /
Hose O.D. Work Press
Prueba / Test
Per Ft
 Option: Available with Stainless Steel armor and fire pro- Hose I.D. (inch)
(inch) (PSI)
Press (PSI)
(lbs.)
tection.
2 1/2 3 3/8 2,000 4,000 3.58
2 1/2 3 5/8 3,000 6,000 7.22
Typical Application 3 3 7/8 2,000 4,000 4.50
3 4 1/4 3,000 6,000 9.62
 For oilfield slim hole rotary drilling and vibrator applica- 4 5 1/2 3,000 6,000 15.56
tions

Information in this sheet is subject to change without notice.

Mangueras y Conexiones Information in this catalog is subject to change without notice TOP Oil
TOS0004 Página 7de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Mud Pump Suction Hose

Description
The mud pump suction hose is manufactured with premium components.

Others
Features

 Abrasion, oil and weather resistant

 Resistant to sunlight and scuffing

Construction

 Reinforcement: Multiple plies of

synthetic
cord fabric with a helical wire
 Cover: Synthetic rubber
 Tube: Synthetic rubber
 Operating Temperatures: -40°F to 200°F (-40°C to 93°C)

Typical Application Descripción / Description

Diam. Ex t. Presión de Peso por
Diam. Inter.
 For oilfield suction hose connection between slush Manguera / Trabajo / Std. Leghts pie / Wt.
Manguera /
pump and mud pit Hose O.D. Work Press (ft) Per Ft
Hose I.D. (inch)
(inch) (PSI) (lbs.)
Fittings 6 7.50 100 6 8.70
8 9.63 100 6 12.80
 Buttweld, male nipples or hammer unions 10 11.75 100 6 19.50
12 13.88 100 6 24.80

Mangueras y Conexiones TOP Oil

TOS0004 Página 8de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Four Spiral Hydraulic Hose • 4SH DIN EN 856

Features

 USCG Fluid Power and Fuel/Lube Systems Accepted

 MSHA Accepted

Construction

 Reinforcement: Four high tensile steel wire spiral layers

 Cover: Abrasion and weather resistant synthetic rubber
 Tube: Oil resistant synthetic rubber
 Operating Temperatures: -40°F to 250°F (-40°C to 121°C)

Typical Application Descripción / Description
Diam. Ex t. Presión de Peso por
Diam. Inter.
 Very high pressure hydraulic lines subjected to Manguera / Trabajo / Burst Press pie / Wt.
Manguera /
pressure surges and flexing. Hose O.D. Work Press (PSI) Per Ft
Hose I.D. (inch)
 Oilfield, construction, mining, farming and high (inch) (PSI) (lbs.)
performance industrial equipment. 3/4 1.000 6,095 24,380 0.67
1 1.516 5,515 22,060 0.97
1 1/4 1.875 5,000 20,000 1.60
Fittings
1 1/2 2.125 4,200 16,800 1.74
 Larger hex surface with API thread 2 2.656 3,625 14,500 2.27

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 9de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Six Spiral Hydraulic Hose • SAE 100R13

Features

 USCG Fluid Power and Fuel/Lube Systems Accepted

 MSHA Accepted
 Flame Resistant

Construction

 Reinforcement: High tensile steel wire spiral layers:

 Sizes up to 1" has four layers, Sizes 11/4" thru 2" has
six layers.
 Cover: Abrasion and weather resistant synthetic rubber
 Tube: Oil resistant synthetic rubber
 Operating Temperatures: -40°F to 250°F (-40°C to 121°C)

Typical Application Descripción / Description

Diam. Ex t. Presión de Peso por
Diam. Inter.
 Very high pressure hydraulic lines subjected to Manguera / Trabajo / Burst Press pie / Wt.
Manguera /
pressure surges and flexing. Hose O.D. Work Press (PSI) Per Ft
Hose I.D. (inch)
 Oilfield, construction, mining, farming and high (inch) (PSI) (lbs.)
performance industrial equipment. 1/2 0.969 5,000 20,000 0.65
3/4 1.250 5,000 20,000 1.08
1 1.531 5,000 20,000 1.41
Fittings
1 1/4 1.969 5,000 20,000 2.53
 Larger hex surface with API thread 1 1/2 2.250 5,000 20,000 3.35
2 2.813 5,000 20,000 5.00

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 10de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

One Wire Hydraulic Hose • 1 SN DIN 853 Exceeds 100R1AT

Features

 USCG Fluid Power and Fuel/Lube Systems Accepted

 MSHA Accepted

Construction

 Reinforcement: One high tensile steel wire braid

 Cover: Abrasion and weather resistant synthetic rubber
 Tube: Oil resistant synthetic rubber
 Operating Temperatures: -40°F to 200°F (-40°C to
93°C)

Typical Application

 Medium pressure hydraulic lines

 Popular for oilfield and farm implement hydraulic lines

Fittings

 Large assortment of crimp-on fittings and reuseables.

Two Wire Hydraulic Hose • 2 SN DIN 853 Exceeds 100R2AT

Features

 USCG Fluid Power and Fuel/Lube

 Systems Accepted
 MSHA Accepted

Construction
 Reinforcement: Two high tensile steel wire braids
 Cover: Abrasion and weather resistant synthetic
rubber
 Tube: Oil resistant synthetic rubber
 Operating Temperatures: -40°F to 200°F (-40°C to
93°C)
Typical Application
 High pressure hydraulic lines
 Oilfield, off-the-road construction equipment, farm
equipment and other high pressure applications.
Fittings
 Large assortment of crimp-on fittings and reuseables.

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 11de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

H069 Hydraulic Hose • SAE 100R5

Features

 General purpose, medium pressure J1402

 Type II DOT approved, 3/16" thru 5/8" sizes.
Construction
 Reinforcement: Two fiber
braids and one steel braid
 Cover: Fiber braid
 Tube: CPE
 Operating Temperatures: Air:-40°F to 212°F, Air
Brake: -40°F to 200°F, Hydraulic Fluid: -55°F to
302°F.
Typical Application
 Recommended for use to handle the bulk transfer
of
petroleum products.
 Handles most hydrocarbons with aromatic content
up to 55% maximum, fats, greases, animal oil,
vegetable oil, hydraulic fluid and a wide range of
chemicals.
 Oilfield service, excellent resistance to oil.
 General purpose truck and hydraulic hose for air
brake, fuel, grease lines, high temperature
petroleum oils and
medium pressure hydraulic applications. (7/8" thru
3" sizes
are not SAE or DOT approved for air brake applications).
Fittings
 Large assortment of crimp-on fittings and reuseables.

H430 Very High Pressure Hy-

draulic Hose • SAE 100R12
Features

 USCG Fluid Power and Fuel/Lube

Systems Accepted
 MSHA Accepted
Construction
 Reinforcement: Four spiral steel plies
 Cover: Hypalon
 Tube: Neoprene
 Operating Temperatures: -40°F to 250°F (-40°C to
121°C)Operating Temperatures: -40°F to 200°F (-
40°C to 93°C)

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 12de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Typical Application
 Very high pressure hydraulic lines subjected to pressure
surges and flexing.
 Oilfield, construction, mining, farming and high
performance industrial equipment.
 Fittings
 Large assortment of crimp-on fittings and reuseables.

Oilfield Vacuum Hose

Features

 Rugged yet lightweight and very flexible

 Oil resistant
Construction

 Reinforcement: Multiple synthetic textile cords with

dual Helix wire
 Cover: SBR/EPDM, corrugated
 Tube: NBR/SBR, RMA IP-2, Class B
 Operating Temperatures: -30°F to 180°F (-34°C to 82°C)93°C)
Typical Application
 Transfer of crude oil, brine water, drilling mud,
and diluted solutions of hydrochloric acids and
diesel fuels.
 Where full suction and working pressures are
required.
Fittings
Crimp-on, KC nipple, cam & groove coupling and ham-
mer union.

Black Rubber Suction Hose

Features

 Abrasion and weather resistant

 Resistant to diluted agricultural
fertilizers
Construction
 Reinforcement: High tensile tire cords, Helix wire
 Cover: EPDM blend
 Tube: EPDM blend
 Operating Temperatures: -40°F to 190°F (-40°C to
88°C)
Typical Application
 Transfer of water based liquid fertilizers and
pesticides.

Mangueras y Conexiones TOP Oil Services

Information in this sheet is subject to change without notice Página 13de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

 Pumping suction and discharge of water and slurries.

 Transfer and haul of salt water (brine).
Fittings
Crimp-on, KC nipple, cam & groove coupling
 and hammer union.

Tank Truck Hose • 150 PSI

Features

 Oil and weather resistant

Construction
 Reinforcement: High tensile tire cord plies,
Helix wire
 Cover: Black Neoprene
 Tube: Black Nitrile
 Operating Temperatures: -40°F to 200°F (-40°C to 93°C)
Typical Application
 Transfer of water based liquid fertilizers and
pesticides.
 Pumping suction and discharge of water and
slurries.
 Transfer and haul of salt water (brine).
Fittings
Crimp-on, KC nipple, cam & groove coupling and hammer
unions.

Tank Truck Hose • 250 PSI

Features

 Oil and weather resistant

Construction
 Reinforcement: High tensile tire cord plies, Helix wire
 Cover: Black Neoprene
 Tube: Black Nitrile
 Operating Temperatures: -40°F to 200°F (-40°C to 93°C)
Typical Application
 Recommended for use to handle the bulk transfer of
petroleum products.
 Handles most hydrocarbons with aromatic content up to
55% maximum, fats, greases, animal oil, vegetable oil,
hydraulic fluid and a wide range of chemicals.
Fittings
 Crimp-on, KC nipple, cam & groove coupling and ham-
mer unions.

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 14de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Hot Air Blower Hose

Features

 Rated at full vacuum

 Excellent heat resistance
 Reliable service life
 Durable cover stands up to effects of ozone and
weathering
Construction
 Reinforcement: High tensile textile cord plies between
Helix wire
 Cover: EPDM
 Tube: EPDM
 Operating Temperatures: -30°F to 350°F (-34°C to 177°C)
Typical Application
 Transferring of hot air to tanks on dry bulk material trucks.
Fittings
 Crimp-on, KC nipple, cam & groove coupling and hammer unions.

Dry Bulk Material Handling Hose

Features

 Collapsible construction for easier handling and

clean-up
 Resistant to abrasive action of cement
Construction
 Reinforcement: High tensile tire cord plies
 Cover: NR/SBR
 Tube: NR/SBR, static dissipating material
 Operating Temperatures: -40°F to 180°F (-40°C to
82°C)
Typical Application
 Unloading of dry bulk cement from trailer to storage
silo by
means of air pressure created in the trailer tank.
 Ideal for dry cement, pebble lime and other abrasive
media.
Fittings
 Crimp-on, KC nipple, cam & groove coupling and hammer unions.

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 15de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Gold Series High Pressure Air Hose

Features

 Excellent abrasion, oil and weather

resistance
Construction
 Reinforcement: Wire, one, two or three
braids
 Cover: Carboxylated Nitrile/pin pricked
 Tube: Nitrile
 Operating Temperatures: Air:-40°F to 250°F (-40°C to 121°C)
Typical Application
 Provide power to air-operated construction equipment; (bull
lines, jackhammer, etc.).
 Power air-operated drills, boring and mining equipment.
 Extremely abusive applications..
Fittings
 Crimp-on NPT and hammer unions.

Potable Water Hose

Features

 Excellent for municipal water transfer

Construction
 Reinforcement: High tensile tire cord plies,
Helix wire
 Cover: Blue, EPDM
 Tube: White, natural rubber (complies with FDA
requirements)
 Operating Temperatures: -25°F to 180°F, (-31°C to
82°C)
Typical Application
 Fresh water systems.
Fittings
 Crimp-on, KC nipple, cam & groove coupling.

Steam Hose
Features

 Excellent abrasion, oil, lube oil, high

temperature and weather resistance
Construction
 Reinforcement: Tire cord, Helix wire
 Cover: Neoprene • Tube: Nitrile

Mangueras y Conexiones TOP Oil Services

Information in this sheet is subject to change without notice Página 16de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

 Operating Temperatures: Sizes 1/2" thru 1": -40°F to 450°F (-40°C to 232°C) Size 2": -40°F to 410°F, burst
temperature up to 450°F.
Typical Application
 Saturated and steam-heated steam applications in chemical plants, shipyards and industrial plants.
 Rugged cleaning and fire prevention.
Fittings
 Crimp-on or two and four bolt boss stem and clamp.

MWH Push-On Hose

Features

 Light weight, use with push-on couplings

Construction
 Reinforcement: Fiber, one braid
 Cover: Neoprene, MSHA approved, or Vinyl
Nitrile
 Tube: Vinyl Nitrile (RMA Class A)
 Operating Temperatures: -40°F to 200°F (-40°C to
93°C).
Typical Application
 Pneumatic tools and low pressure hydraulics. (Air, wa-
ter, oil)..

Pressure Washer Hose

Features

 Resistant to usual detergents

 Non-marking, abrasion, heat,
ozone and weather resistant
Construction
 Reinforcement: One steel braid
 Cover: Vinyl nitrile
 Tube: Nitrile
 Operating Temperatures: -40°F to 250°F (-40°C to
121°C)
Typical Application
 Pressure washer for cold and hot water.
 Oilfield, engines, equipment, tanks, building and cleaning.

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 17de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Liquid Mud Hose

Construction

 Reinforcement: High tensile tire cord plies

 Cover: Black, abrasion resistant NR/SBR
 Tube: Black, abrasion resistant NR/SBR
 Operating Temperatures:
 Static dissipating -35°F to 190°F (0°C to 88°C)
Typical Application
 Oilfield mud pump connections for mud transfer.
Fittings
 Crimp-on NPT, and hammer unions

Frac Tank Hose

Construction

 Reinforcement: High tensile tire cord plies,

Helix wire
 Cover: Nitrile
 Tube: Specially compounded elastomer Low
Oil Swell
 Operating Temperatures: -40°F to 190°F (-40°C to 88°C)
Typical Application
Ideal for handling salt and fresh water, tank bottoms,
crude oil and drilling..
Fittings
 Crimp-on or banded NPT, and frac unions

Yellow Wire Braid Air Hose

Construction

 Reinforcement: Steel wire plies

 Cover: Neoprene
 Tube: Nitrile blend
 Operating Temperatures: Air:-40°F to 220°F (-40°C to
104°C)
Typical Application
Oilfield, heavy construction, mining and road building service.
Fittings
 Crimp-on or four bolt boss stem and clamp

Mangueras y Conexiones TOP Oil Services

TOS0004 Página 18de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Metal Hose Series 300 and 800 • ISO 10380 Qualified

Construction

Series 300
Features
 Available in 304, 321 and 316L Stainless Steel. Other materials
available on request.
 Pressure capability includes full vacuum to pressures
shown in the chart to the right.
 Non-corrosive
 Hose corrugation designs include Standard Pitch,
 Open Pitch and Superflex.
 Operating Temperatures: Cryogenic to 1500°F.
Typical Application
 Transferring extremely high temperature applications such as
air, oil, hydraulic fluid, or CO2.

Series 800
Features
 Available in 321 Stainless Steel hose with 304
 Stainless Steel braid.
 Other materials available on request.
 Pressure capability includes full vacuum to pressures
 shown in the chart to the right.
 Non-corrosive
 Operating Temperatures: Cryogenic to 1500°F.
Typical Application
Transferring extremely high temperature application media such
as air, oil, hydraulic fluid or CO2..

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 19 de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Kevlar, Mud Pump and D Series Belts

Features
Low maintenance alternative to gear and chain
 Oil, heat and ozone resistant
Construction
 Kevlar and Mud Pump Belts are narrower, allowing for up
to three times more horsepower than a regular belt.
 Kevlar belts are made of Kevlar tensile cor d, perfect when
extra strength is needed.
 D Series belts are wider to fit specific needs and are also
the most practical and dependable belts for industrial drives.
Typical Application
Oilfield, heavy construction, mining and road building service.
Fittings
 Ideal for vertical shaft drives

Dimensional Data

Mangueras y Conexiones TOP Oil

Information in this sheet is subject to change without notice Página 20 de 21
 TOP Oil
Carr. Monterrey Km.104, Col. Casa Bella
Reynosa Tamaulipas
TOP
IL SERVICES Tel (899) 925 2747, Fax (899) 923 4308

Offers A Complete and Related and Specialty Products

Mangueras y Conexiones TOP Oil

Página 21 de 21