Scribd
Upload
110 views8 pages

Electrical Circuit Theory Q&A Guide

This document contains question banks for an electrical circuits paper divided into 5 units. Unit 1 covers mesh current and node voltage analysis methods, as well as lumped and non-linear elements. Unit 2 discusses Thevenin's and Norton's theorems and their applications. Unit 3 covers coupled coils, mutual inductance, and power in 3-phase circuits. Unit 4 includes resonant circuits, transformers, and power transfer. Unit 5 analyzes transient responses in RC and RLC circuits. The questions range from 2 to 14 marks and include calculations, derivations, explanations, and circuit analyses involving resistors, capacitors, inductors, sources, and various circuit theorems.

Uploaded by

Vinoth Kaladheepan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
110 views8 pages

Electrical Circuit Theory Q&A Guide

This document contains question banks for an electrical circuits paper divided into 5 units. Unit 1 covers mesh current and node voltage analysis methods, as well as lumped and non-linear elements. Unit 2 discusses Thevenin's and Norton's theorems and their applications. Unit 3 covers coupled coils, mutual inductance, and power in 3-phase circuits. Unit 4 includes resonant circuits, transformers, and power transfer. Unit 5 analyzes transient responses in RC and RLC circuits. The questions range from 2 to 14 marks and include calculations, derivations, explanations, and circuit analyses involving resistors, capacitors, inductors, sources, and various circuit theorems.

Uploaded by

Vinoth Kaladheepan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd

Question bank for ect paper

Unit -1
2marks questions
1) Explain the method for mesh current method?

2) Explain the node voltage method?

3) What is tree and basic cut set?

4) What are lumped elements?

5) What is a non linear elements?

8marks questions

1) Write a note on ideal sorces ? explain them

2) Write a note on active and passive elements?

3) Taking clockwise mesh currents write the mesh equations for the circuit shown

14 marks questions
1) Explain parallel resonance in a RLC circuit?
2) A 120v source whose frequency is variable is impressed across series RLC circuit with R=50
ohms=0.5H,C=50 microF determine the following

A. Resonant freq of the circuit

[Link] at resonance

C. voltages developed across L and C at resonance

D.Q factor

[Link] width

Unit -3

2marks questions

1) Using thevenins theorem find the current through 1.0Ω resistor


2) what should be the value of load resistor R to the dissipate maximum power?

3) in the circuit shown find the current through the 4Ω resistor and verify reciprocity theorem

14 marks questions
1) in the network shown an ammeter of resistance 0.75Ω is connected to measure the current
through the 3.25Ω resistor using compensation theorem determine the reading of ammeter

2) using millimans theorem find the current through the 6Ω resistor

3) for the circuit shown determine the current through the 12Ω resistor using Norton’s
theorem and confirm the result by thevenins theorem
4) In the circuit shown find the value of R for which the power absorbed by its is maximum.
also find the maximum value of power

Unit -4
2marks
1) Two coils having self induction of 0.2mH and 1.25mH and mutual inductance of
0.4mH .what is the value of coff of coupling

2) What are tuned circuits

3) Distinguish between single tuned and double tuned circuits

4) What do you understand by phase sequence

8 marks
1) Explain the necessary phasor diagram how power consumed by 3 phase star connected load cas
be measured using two watt meter method

2) Two coupled coils of L1=0.8H and L2=0.2H have coupling coeff k=0.9 find the mutual inductance
M and the turns ratio N1/N2

14 marks
1) The input power to a 3phase load is 15Kw at 0.6 p.f lagging two wattmeter are connected to
measure the power find the individual readings of wattmeter

2) The resonant frequency of double tuned circuit shown is 1000rad ./sec .its mutual inductance is
[Link] self inductance of the two coils , output voltage at resonance , maximum
output voltage and the corresponding value of M and, critical coupling

Unit -5
8marks

1) A series RC circuit consists of resistor of 10Ω and capacitor of 0.1F and shown in fig .a
constant voltage of 20V is applied to circuit at t=[Link] the current equation determine
the voltage across the resistor and the voltage across the capacitor
14 marks

1) In the circuit shown in determine the current equation for i1 and i2 where the switch is closed at
t=0

2)

In the circuit shown consisting of series RLC elements with R=10Ω,L=0.5H,C=200µF has a
sinusoidal voltage V=150sin(200t+Ф).if the switch is closed when Ф=30 0 determine the current
equation

You might also like