BITS Pilani, Dubai Campus

FirstSemester, 2023-24
EEE FI1I Electrical Sciences QUIZ-1
Maximum marks:24 Weightage: 12% Duration: 30 minutes

Name: ID No.:

Note:- Answer all the questions. Show your calculations in the space provided below each question.
Merely writing the final answers without indicating the steps will not fetch any credit.

1. Consider an ideal voltage source described by the function v(t) = 5sin()t V. The value of this
voltage source when t =3 sec is V.(2 marks)

2. For the circuit shown below, the current i = A. (3 marks)

6A

3. Using nodal analysis, find the voltages V,. V, and V, for thecircuit shown below. (8 marks)
V2

20 222 T5A
4. A certain circuit is composed of two parallel resistors. The total resistance is 1403 2. If one
of the resistors is 4.7 kS2, the value of the other resistor is kSl. (3 marks)

5. Determine the branch currents i,, i, ,ia, and i, for the circuit given below using current
divider formula only. Show necessary steps in arriving at the solution. (8 marks)
22 22

20 V 62 3
12
 BITS Pilani-Dubai Campus
First Semester, 2023-24
EEE F111 ELECTRICAL SCIENCES
MID-SEMESTER TEST (Open Book Component)
Duration: 90minutes Maximum Marks: 60 Weightage: 30%

Note:-Answer allthe questions. For fullcredit, show all the steps used in arriving at your answe.
1) Abattery of 20 Vis connected across three capacitors in series as shown in the circuit below. Find the
totalenergy stored in the capacitors in the steady state. (4 marks) (Hint:
HH t)
20uF 20 F ioF

2) A
series RL circuit with L= 3 Hand a series RC circuit with C =3uF have equal time constants. If
both the circuits use the same value of resistor, find the value of R. What is the value of the time
constant in milliseconds? (4 marks)

3) The switch in the circuit shovwn below has been closed for a long time. At t= 0s, the switch is
opened. Determine the natural response i(t) for t >0s. (12 marks)

1F.
Switch t=0s 2H
3.2
i(t)

4) For the circuit shown below, determine the mesh currents i, and iz as wellas the voltage v across the
52 resistor using mesh analysis. (10 marks)
32 2 2

t2
50 V 25 V

6 2 82

(P.T.0)
5) For thefirst-order RL circuit shown below, find the current i, through the inductor for t <0s and for
t=2 ms. Also, find the current throughthe 300 2 resistor for t < 0s andfor t = 2ms. (10 marks)
i,(t) 400 2 500 2

05 H Switcht=0s 300

6) For the circuit shown below, find (a) the value of load resistance R, such that maximum power is
transferred to R,., and (b)the value of this maximum power. (10 marks)
tamps
122

22

20 V SI22

7) Using superposition theorem, find the value of current I in the circuit shown below. Show all the
steps used in arriving at your answer. (10 marks)
200Volts
Ew

60 A
502
1502
20A
 BITS, PILANI - DUBAI CAMPUS
FIRST SEMESTER 2023 - 2024
EEE F111 ELECTRICAL SCIENCES
QUIZ 2 (CLOSED BOOK)
MAXIMUM MARKS: 26 WEIGHTAGE: 13 %
DATE: 29.11.23 DURATION: 30 MINUTES

Name: Id No: Faculty:

1. The unit of inductive reactance (XL)is [IM]

2.The energy stored in an ideal transformer is [Zero/Infinity] [IM]

3. Magnetic cores ideally should have

(a) Large permeability (b) Small permeability

(c) Zero permeability (d) None of the above. [IM]

4. Write the expression to find flux in torroid core.

[2MJ
Ans:

5. Current in electric circuit is analogous to in magnetic circuit. [IM]

6. In an ideal transformer input power equals output power (TRUE/FALSE) [1M]

7. Inductance, which is the number of flux linkages per ampere, isdirectly proportionalto the
number of turns. (TRUE/FALSE) [IM]

8. What is the primary voltage applied to the transformer ilustrated [4M]

1.2A
15

5:1

Ans =
Page (1/2)
9. A coilof radius Rhas 400turns and a self-inductance of 32 mH. The self-inductance of
the same coilwhen wound with 300turns will be [4 M]

10. Adelta connected load has resistances RAB=2ohms , RRc= 3 ohms and RAc 5 ohms. Find
the equivalent star connected load. [4 M]

11. Asolenoid has an air core with radius of lcm and a length of 0.2 m. Find the number ofturns
required for acurrent of 1Ampere to produce amagnetic flux density of 0.1 Tesla. . [4 M]

12. Write the expression to find three phase AC power in terms of the line values. [2 M]

Ans:
Page (2/2)
 BITS Pilani-DubaiCampus
First Semester, 2023-24
EEE F111ELECTRICAL SCIENCES
Comprehensive Examination
Duration: 3 hours Maximum Marks: 90 Weightage: 45%

Note:-There are two parts in this question paper: Part-A and Part-B. Answer them on separate answer
booklets. For full credit, show all the steps used in arriving at your answer.
Alist of formulae, some of which may be relevant
+ A,e; P3ó = V3 Vcos($): M= N,RNg ; L,(T,) = 2 10 1,(T,):
N2
L= D v0) =A,e
¢=Ni; v() =A,e-t +Agte-at; v(t) = e-B, coso4t +jB,sino, t]; Pro = VealPAcos¢: In adelta
2R

connection, V, = Veh and I, = V3/ph; In an ideal transformer, V

V
N2,
N,'

PART-A (45 marks)

1. Using meshanalysis, find the currents i, iz and i,in the circuit shown below. [6 marks]
W
l02

24 V 42

$122
41,

2. In the ircuit shown below, find ip, Vo and i for all time, assuming that the switch was open for a
long time and is closed fromt= 0sec onwards. [9 marks]
22 + 32

I0V Xtz0ec 62 4H

3. Consider a toroidal core having a relative permeability of 1500.The average radius of the core is
0.1m and its cross-sectional radius is 0.02 m. Determine the number of turns required for the
coil of wire wound round the core to exhibit an inductance of 100 mH. [6 marks]
1
4. A silicon diode has a reverse saturation current of 6 nA at 300 K. Find the current flowing
through the diode if the forward bias voltage across it is 0.7 Vat 290 K. [8 marks]
5. The circuit shown below uses three identical germanium diodes with emission coefficient n = 1
and reverse saturation current I, = 10-14 A. Find the value of the incoming current Irequired to
obtain an output voltage Vo = 2V. [9 marks]
3rom rest of 4
the circuit
I
+

6. In the circuit shown below, find the output voltage Vo assuming that the Op Amp is ideal.
Indicate clearly all the assumptions and the relevant equations used, for full credit. [7 marks]

I6 2
82

75 V
24.2
1223

(Part-B starts on the next page)

2
 PART-B (45 marks)
theorem for the circuit
I. Determine the current through the 4 Q load resistor using Norton's
shown below. [9 marks] A
22
2V
2R=4n.
5A 222

below, find the natural response of v(t) and i(t)

2. For the second-order series RLC circuit shown
i(0) = 4A. [9 marks]
for t > 0sec, given the initialconditions v(0) = 0V and

vt)

400 V is supplying a delta connected

3. A three-phase balanced power system with a line voltage of and hence determine (a) phase
load of 1500 W at 0.8 power factor. Draw this circuit arrangement
current; (b) line current; and (c) phase impedance. [9 marks]
4. An ideal transformer connected to 240 V mains, supplies a 12 V,
150 W lamp. Calculate the
transformation ratio and the current taken from the supply. [6 marks]
region and that a = 1.
5. For the circuit given below, assume that the transistor is in the active
(a) Find R such that ig = 2 mA.
(b) Find Re such that i; = 2 mA and VcR = -1 V.
transistor is in the active
(c) Given that i; = 2mA, find the maximum value of Re such that the
region. [12 marks]

VEe =5V (Paper ends)