Scribd
Upload
145 views3 pages

Plate Theory of Structures Analysis

The document analyzes the stability, loading, and structural analysis of a truss. It determines that the truss is statically indeterminate based on its dimensions. It calculates the dead and live loads on the truss. It then performs an analysis of the truss, solving for the forces at each joint using equilibrium equations. The forces are: AB = 450 N compression, AC = 389.71 N tension, BC = 450 N tension, BD = 900 N compression, CD = 389.71 N tension. Finally, it presents equations to calculate the shear and bending moment along the truss.

Uploaded by

Kumiko Ainsworth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
145 views3 pages

Plate Theory of Structures Analysis

The document analyzes the stability, loading, and structural analysis of a truss. It determines that the truss is statically indeterminate based on its dimensions. It calculates the dead and live loads on the truss. It then performs an analysis of the truss, solving for the forces at each joint using equilibrium equations. The forces are: AB = 450 N compression, AC = 389.71 N tension, BC = 450 N tension, BD = 900 N compression, CD = 389.71 N tension. Finally, it presents equations to calculate the shear and bending moment along the truss.

Uploaded by

Kumiko Ainsworth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

HOLY ANGEL UNIVERSITY

Angeles City, 2009, PH


COLLEGE OF ENGINEERING AND ARCHITECTURE

PLATE

THEORY OF STRUCTURES 1
(S.Y. 2018 – 2019 2ND Semester)

SECTION: CE-4S1

PREPARED BY:
QUITO, FRANCES NICOLE

INTRUCTOR:
ENGR. CARMELO PANGILINAN

____________
RATING
STABILITY AND DETERMINACY
1. If b+r<2j → Unstable
2. If b+r=2j → Statically determinate
3. If b+r>2j → Statically Indeterminate
b= 7
r=4
j=5

7+4=2(5) 11>10 → Statically Indeterminate

DEAD LOADS AND LIVE LOADS


Concrete, reinforced stone=23.6
Clay tile, Ludowici=0.48
DL= (23.6) (1.5)(0.4) + (0.48)(1.5)
DL=14. 88kN/m

Ra=Rb=14.88kN/m(3m)/2
Ra=Rb=22.32 kN

3m
3m

ANALYSIS OF TRUSS
ΣMD=0
B 2xRA=450x
RA=225N

ΣMA=0
2xVD=450x+(450sin30∘)(2x)
0 C 0 VD=450N
D
A ΣFH=0
HD=450cos30∘=389.71N

At Joint A At Joint C
ΣFV=0 ΣFH=0 ΣFV=0 ΣFH=0
FABsin30∘=225 FAC=FABcos30∘=450cos30∘ FBC=450N FCD=389.71N
FAB=450N FAC=389.71N

At Joint B
ΣFH=0 ΣFV=0
FBDcos30∘=450cos30∘+450cos30∘ FBDsin30∘+450sin30∘=450+450sin30∘
FBD=900N FBD=900N
At Joint D
ΣFV=0 ΣFH=0
450=900sin30∘ 900cos30∘=389.71+389.71
450=450 779.42=779.42

Summary
AB = 450 N compression
AC = 389.71 N tension
BC = 450 N tension
BD = 900 N compression
CD = 389.71 N tension

SHEAR AND MOMENT


R1=R2=1/2(1/2Lwo)=1/4Lwo
yx=wo/L/2
y=2wo/Lx
F=1/2xy=12x(2woL)
F=wo/Lx2
V=R1−F
V=1/4Lwo−wo/Lx2
M=R1x−F(1/3)x
M=1/4Lwox−(wo/L)x2(1/3)x

You might also like