0% found this document useful (0 votes)
4 views6 pages

RLTECH RGS3200-10P Specification

The RGS3200-10P is a managed PoE switch featuring 8 Gigabit RJ45 ports and 2 SFP slots, providing a total PoE power supply of 140W, suitable for deploying wireless access points and IP cameras. It supports various advanced features including QoS, security protocols, and extensive management options, making it ideal for small to medium business networking. The switch complies with IEEE standards and offers high reliability with options for fanless operation.

Uploaded by

Rajnikant
Copyright
© All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
4 views6 pages

RLTECH RGS3200-10P Specification

The RGS3200-10P is a managed PoE switch featuring 8 Gigabit RJ45 ports and 2 SFP slots, providing a total PoE power supply of 140W, suitable for deploying wireless access points and IP cameras. It supports various advanced features including QoS, security protocols, and extensive management options, making it ideal for small to medium business networking. The switch complies with IEEE standards and offers high reliability with options for fanless operation.

Uploaded by

Rajnikant
Copyright
© All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product Overview

The RGS3200-10P provides 8*10/100/1000Mbps RJ45 ports that

supports 802.3af/at Standard, with a total PoE power supply up to

140W, powerful and flexible enough for users to deploy wireless access

points or IP-based network surveillance cameras. The switch also

comes equipped with 2*1000Mbps SFP slots, expanding your network

flexibly. In addition, it provides high performance, enterprise-level

QoS, advanced security strategies and rich layer 2 management

features. With all these advanced features, the PoE Switch is an ideal

choice for small and medium business networking.

Product Features

 Complies with IEEE802.3af/at Standard;


 Support RJ45 Auto-MDI/MDIX;

 Supports PoE Power up to max 30W for each PoE port;

 Auto detect power device;

 PoE, main board and power supply are all in one;

 Remote power and Data feeding up to 100m;

 Flow Control for Full Duplex operation and back pressure for Half Duplex Operation;

 Support Energy-Efficient Ethernet (EEE) function (IEEE802.3az) ;

 Highly reliable design, supporting traditional STP/MSTP/RSTP Layer 2 link protection technology;

 Support static convergence and dynamic convergence (LACP) 2 convergence modes, effectively increase the link

bandwidth, improve the reliability of the link, and at the same time can achieve load balancing, link backup;

 Web, CLI (Console Port, Telnet, SSH), SNMP and RMON bring abundant management policies;
 Support PD-ALIVE function.
Product Specifications
Hardware Specification

Model RGS3200-10P

8*10/100/1000Mbps RJ45 Port (Auto Negotiation/Auto MDI/MDIX)


Interface 2*1000Mbps SFP Slots
1 Console Port

IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1X, IEEE 802.1q, IEEE 802.1p,
Standard
IEEE 802.1d, IEEE 802.1w, IEEE 802.3ad, IEEE802.3af, IEEE802.3at

10BASE-T: UTP category 3,4,5 cable(≤100m)


Network Media 100BASE-TX: UTP category 5, 5e cable(≤100m)
1000BASE-T: UTP category 5e, 5 cable(≤100m)
1000BASE-X: MMF, SMF
Indicator PWR, LNK/ACT, PoE, SYS

MAC Address Table 8K, Auto-learning, Auto-updating

Jumbo Frame 9216Bytes

Packet Buffer 4.1Mbit

Transfer Mode Store-and-forward

Packet Forward Speed 14.88Mpps

Switching Capacity 20Gbps

PoE Port Port1~8

PoE Power On RJ45 1/2(+),3/6(-)

PoE Power Output Voltage:55V Power:30W(MAX)

PoE Power Budget 140W 140W Fanless(optional)

Power Supply 150W 150W Fanless(optional)

Input Power Supply AC:100~240V , 50/60Hz DC: 48~57V

Fan Quantity 1 Fanless(optional)

Dimensions(L*W*H) 280*180*44mm

Operating Temperature 0°C ~ 50 °C

Storage Temperature -40 °C ~ 70 °C


Operating Humidity 10% ~ 90% non-condensing
Storage Humidity 5% ~ 90% non-condensing
Surge Protection Common mode ±4KV Differential mode ±2KV;
MTBF >50000 hour

Electrostatic Standard Contact ±6KV, Air ±8KV

Green Energy Saving Support IEEE(802.3az)


Software Specification
DHCP Server
DHCP Server
DHCPv6 Server
L3 Features
Static Route(IPV4/IPV6)
Route
Route Aggregation
MAC Aging Time
MAC Address Table MAC Filter
MAC Notification
Console/Telnet/SSH
Http/Https,SSL/TLS
FTP/TFTP
Syslog
SNMP(v1/v2c/v3),SNMP Trap
Basic Management
SNTP/NTP
CPU protect
Software/Hardware watchdog
Firmware Upgrade/Backup
Ping/Traceroute
Bandwidth Control
Flow Control
EEE
MTU
CFM(802.1ag)
EFM OAM(802.3ah)
Port Config
DDM
Storm Control
Port Isolation
Port Security
Virtual Cable Test
ULDP/Cisco UDLD
LLDP(802.1ab)
L2 Features Discovery
LLDP-MED
Static
LACP(802.3ad)
(Link Aggregation)
Load Balance(src-mac/dst-mac/src-ip/dst-ip)
Max groups and ports per group
VLAN(802.1Q 4K)
Access/Trunk/Hybrid
Private VLAN
VLAN Filter
MAC-based VLAN
Protocol-based VLAN
VLAN
IP Subnet-based VLAN
Voice VLAN
GVRP/GMRP
QinQ/Selective-QinQ/Flexible QinQ
VLAN Translation/N:1 VLAN Translation
Guest VLAN
Loopback Detection
Network Loop Detection
ERPS
STP/RSTP/MSTP
Spanning Tree MSTP Support 64 instance
BPDU Guard/Root Guard/BPDU Tunnel
Static ARP
ARP Scanning Prevention
ARP
ARP Spoofing Prevention
ARP Guard
Gratuitous ARP
Dynamic ARP Inspection
ARP Quantity Control
Anti ICMP Attack
ICMP ICMP Rate Limit
ICMP Unreachable Drop
Control Multicast DCSCM
Multicast VALN Multicast VALN
IPv4 Related Function IGMP SNOOPING V1/V2/V3
IGMP Fast Leave
IGMP Proxy
DHCP Client/BOOTP
DHCP Relay
DHCP
DHCP Snooping
DHCP Option 82/43/60/61/67
IPv6 Basic IPv6 ND Snooping
DHCPv6 Relay
DHCPv6 Snooping
DHCPv6
IPv6 SAVI
Security RA
IPv6 Multicast Routing MLD v1/V2 Snooping
SNMP over IPv6 Support
HTTP over IPv6 Support
IPv6 Related Function SSH over IPv6 Support
DNS over IPv6 Support
IPv6 ping/traceroute Support
IPv6 Telnet Support
IPv6 Features
IPv6 Radius+ Support
IPv6 Tacacs+ Support
IPv6 SNTP/NTP Support
IPv6 FTP/TFTP Support
IPv6 IPSec Support
IPv6 ACL
Trust COS/DSCP
Basic
Trust Port
SP
Scheduling WRR
WDRR
Based on VLAN
Based on COS/DSCP
PolicyMap Stream
Aggregate PolicyMap
Ingress PolicyMap
CAR Stream Shaping(leak algorithm)
Policing
Ingress Policing
QoS(Quality Of Service)
COS/802.1p Priority
IP Precedence
IPv4 DSCP/IPv6 DSCP
Rewrite
drop-precedence
internal-priority
Ingress/Egress Rewrite
DSCP to DSCP mapping
DSCP to DP mapping
Queuing DSCP to Queue mapping
COS to DP mapping
COS to Queue mapping
ACL IP-ACL SIP/DIP
IP Protocol
IP Priority(DSCP,TOS, Precedence)
TCP,UDP src,dst Port
SRC/DST MAC
VLAN
MAC-ACL
COS
Tag/Untag
IP-MAC ACL MAC-ACL and IP-ACL
User-defined ACL Base on user defined profile
Based on time period ACL
ACL Features ACL on VLAN
Based on ACL Stream
Port Based Authentication
Support EAPoR
802.1x
MAC based Authentication
Guest VLAN
Based on Port Authentication
MAB
Based on MAC Authentication
MAC Address Count Based on Port
Limit Based on VLAN
Based on Port
IP Address Count Limit
Security Based on VLAN
Access Management Based on source mac and IP address
TCP Flag
TCP Flagment
Deny DoS Attack
IP Segment
ICMP
TACACS+ Standard Support
Standard Support
Radius
Client, Support MD5
SSL Openssl 1.1.0
MRPP Compatiable ERRP
Redundancy Related Uplink Protection Protocol
ULPP
Function Smart Link/Monitor Link
ULSM Uplink State Monitor
Support one to one, multi to one
Port based mirror, support ingress, egress, and both
Mirror Mirror CPU based mirror
Flow based mirror
RSPAN
ON/OFF Config
PoE PoE Management Alive Checking for PD
7/24 On/Off Scheduling
Ordering Information

Model Description

RGS3200-10P 8-Port Gigabit+2G SFP Managed PoE Switch(8-Port PoE,Support 802.3af/at Standard)

You might also like