8 Port PoE Full Gigabit

Managed Industrial Switch

WD-GS-2210-8P2Si

Product brochure

Apollo Infoways Pvt. Ltd.

[email protected]
www.mywatchdog.in
Product introduction

WD-GS-2210-8P2Si is a 8-port POE full gigabit managed industrial switch,

providing 8 gigabit POE ports and 2 gigabit optical ports. Each POE port can
provide up to 30W of power, which is suitable for IEEE802.3af /at compliant
Powered Devices (PDs), especially suitable for application scenarios where it is
difficult to provide AC power and the cost of wiring is high. EMC industrial
level 4 protection performance; corrugated high-strength aluminum profile
shell, IP40 grade, low power consumption design, anti-vibration guide rail
installation, working temperature of -40℃-85℃, can work in harsh
environments; WD-GS-2210-8P2Si can also Support rich network
management functions: RUN-Ring (self-healing time <10ms), RSTP, VLAN,
QoS, SNMPv1/v2c/v3, IEEE802.1X, SSH/SSL, port mirroring, port aggregation
and other rich redundancy, switching and security Management features
make it a reliable solution for intelligent transportation, video surveillance and
other harsh industrial environments.

WD-GS-2210-8P2Si
Main features
Port 6KV lightning protection

• All ports support 6KV lightning protection, PSE short circuit protection,
PoE overload, power supply over temperature protection, over voltage
protection, surge current protection and other protection features.

AI DIP Switch

• AI Loop Protect: Using the fast loop network RUN-Ring technology, when
the main link of network transmission fails, the system automatically
switches to the backup link, and the fault recovery time can reach as fast as
10ms.
• AI PoE: Automatically detect the power receiving port, find a dead device,
and restart the device after power off.
• AI VLAN: Isolate ports 1-4 from each other, which can effectively
suppress network storms and improve network performance.
• AI Extend: 1-4 ports support long-distance power supply of 250 meters
(recommended to use a super network cable above 5).
Powerful processing capabilities
• Support 802.1Q VLAN, MAC VLAN, IP VLAN, users can flexibly divide
VLAN as needed.
• Support QoS, 8 port queues, support port priority, 802.1P priority, DSCP
priority, support SP, WRR, SP+WRR, WFQ priority scheduling algorithm.
• Support ACL, support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function,
provide flexible and secure access control policy.
• Support IGMP v1/v2/v3 Snooping, MLD v1/v2 Snooping, to meet the
requirements of multi-terminal HD video surveillance or video conference.
• Supports the fast leave mechanism and querier of Layer 2 multicast,
supports Layer 2 IPv4 static multicast and Layer 2 IPv6 static multicast.

Perfect security mechanism

• Complete security authentication mechanism: It supports IEEE 802.1x,
Radius, Tacacs+, etc., and can provide users with a complete security
authentication mechanism.
• The perfect loop detection mechanism can ensure the stable operation of
the network for a long time.
• Provide port isolation in the same VLAN, and security features such as
DHCP-Snooping, IP+MAC+port binding, etc., to further ensure user data
security.
• Support ARP protection, IP source protection, DoS protection.
• Support to restrict user access based on port number, IP address, and
MAC address.
Diverse reliability protection
• Support STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE 802.1s)
protocols to eliminate Layer 2 loops and implement link backup.
• Supports loop protection, root bridge protection, TC protection, BPDU
protection, and BPDU filtering.
• Support relay alarm output functions such as power failure, port
disconnection, and PoE power supply abnormality.
• Industrial level 4 protection and anti-jamming capability
Perfect POE power supply function
• Support 802.3af/at standard, built-in high-power power supply, meet the
needs of POE scenarios such as security monitoring, wireless coverage, and
IP telephony.
• Support PoE power limit and set PoE port priority. When the power
exceeds the limit, the power supply of the high-priority port will be given
priority.
• Support setting PoE power supply time period, users can control the time
period of PoE power supply according to their own needs.
• Support PoE chip status check, users can view the PoE chip temperature,
output power and other parameters in real time through the web page.
Flexible and convenient management and maintenanceF
• Supports various management methods such as Console, Telnet, and
SSH.
• Support WEB network management (HTTP, HTTPS, SSL V3), which is
simpler and more efficient, and is convenient for users to install and
debug.
• Supports file upload and download management in TFTP mode.
• Support SNMP V1/V2/V3 to facilitate device management through the
network management platform.
• Support one-stop management and maintenance of Fengrunda Apollo
cloud platform, which can realize all-round remote operation and
maintenance such as automatic device discovery, network topology
management, and remote configuration management of devices
Industry Standard
EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS:
IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV
IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±6kV
IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
IEC60068-2-6 (Vibration)
IEC60068-2-27 (Shock)
IEC60068-2-32 (Free Fall)
Product Specifications

Hardware Specifications
● 8 10/100/1000Mbps RJ45 port
Network Interface ● 2 Gigabit SFP port
● 1 Console port
● IEEE802.3、IEEE802.3i、IEEE802.3u、IEEE802.3ab、
IEEE802.3z、IEEE802.3ad、IEEE802.3x、IEEE802.3af/at、
Network Protocol
IEEE802.1p、IEEE802.1q、IEEE802.1w、IEEE802.1d、
IEEE802.1s
● Backplane bandwidth: 20 Gbps (non-blocking)
● Packet forwarding rate: 14.9Mpps
Performance
● MAC address table: 16K
Specifications ● Port cache: 4.1Mb
● Forwarding mode: store and forward
● Power indicator: P1, P2
● System indicator: SYS
LED Indicator ● Alarm indicator: ALM
● Optical port indicator: Link&Act F1~F2
● Ethernet port indicator: POE&Link&Act 1~4
POE Pin ● 1/2 （+），3/6/(-)；
● Input voltage: 48-56V DC
● Input method: plug-in 5-core 5.08mm pitch terminal
block (support dual DC power
source backup, built-in overcurrent protection, support
Power Supply Support
anti-reverse connection)
● No-load power: 6W@52V DC
● Full load power: 240W@52V DC (POE full load output)
● Single-port PoE maximum output power: 30W
● Casing: IP40 grade protection, corrugated high-
strength metal shell
Physical Specifications
● Installation: DIN rail installation
● Dimensions (LxWxH): 163mm×110mm×46.5mm
● Operating temperature: -40~85°C
Environmental ● Storage temperature: -45~85℃
Specifications ● Working humidity: 5%~95% RH without condensation
● Storage humidity: 0%~95% RH without condensation
Safety Standard ● CE/ROHS/FCC
Software Specifications
IEEE 802.3: Ethernet Media Access Control (MAC) Protocol
IEEE 802.3i: 10BASE-T Ethernet
IEEE 802.3u:100BASE-TX Fast Ethernet
IEEE 802.3ab: 1000BASE-T Gigabit Ethernet
IEEE 802.3z: 1000BASE-X Gigabit Ethernet (optical)
IEEE 802.3ad: Standard method for performing link aggregation
IEEE 802.3x: Flow Control
Protocol standard IEEE 802.1p: LAN Layer 2 QoS/Cos protocol for traffic prioritization
(multicast filtering function)
IEEE 802.1q: VLAN Bridge Operation
IEEE 802.1d: STP Spanning Tree
IEEE 802.1s: MSTP Spanning Tree
IEEE 802.1w:RSTP Spanning Tree
IEEE 802.3af
IEEE 802.3at
AI Loop Protect
One-click AI PoE
shortcut function AI VLAN
AI Extend
DHCP Support DHCP Snooping
Support 4K VLANs
VLAN Support 802.1Q VLAN, MAC VLAN, IP VLAN
Voice VLAN
Comply with IEEE 802.1d standard
MAC Address
Support MAC address automatic learning and aging
Table
Support static, dynamic, filtering address table
password protection
Support to restrict user access based on port number, IP address,
MAC address
Support HTTPS, SSL V3, TLS V1, SSH V1/V2
Support IP-MAC-PORT binding
Safety Features
Support ARP protection, IP source protection, DoS protection
Support DHCP Snooping, DHCP attack protection
Support 802.1X authentication, AAA
Support port security and port isolation
Support CPU protection function
Software Specifications
Support PoE total power limit
Support PoE chip status check
PoE management
Support PoE port priority setting
Support setting PoE power supply time period
Support L2 (Layer 2) ~ L4 (Layer 4) packet filtering function
Access
control(ACL) Support port mirroring, port redirection, flow rate limit, QoS
remarking
Supports 8 port queues
Quality of
Support port priority, 802.1P priority, DSCP priority
Service(QoS)
Support SP, WRR, WFQ priority scheduling algorithm
Support STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE
802.1s) protocols
Spanning tree
Support loop protection, root bridge protection, TC protection, BPDU
protection, BPDU filtering
Support IGMP v1/v2 Snooping
Support multicast VLAN
Multicast
Support multicast filtering, packet statistics, unknown multicast
discard
Support multicast suppression
Storm suppression Support broadcast suppression
Support unknown unicast suppression
Support static aggregation
Support dynamic aggregation
Link aggregation
Support based on IP, MAC, mixed load balancing mode
A maximum of 32 aggregation groups are supported
Support IPv6 Ping, IPv6 Tracert, IPv6 Telnet
IPv6
Support IPv6 SSH, IPv6 SSL
Support WEB network management (HTTP, HTTPS, SSL V3)
Support CLI (Telnet, SSH V1/V2, local serial port)
Support SNMP V1/V2/V3
Management and Support LLDP, RMON
maintenance Support ARP protection, IP source protection, DoS protection
Support CPU monitoring, memory monitoring
Support system log, graded warning
Support Ping, Tracert detection, cable detection