Prototypes
More actions
A prototype device is a development stage device, these can be quite rare and sought after for numerous reasons, for both collectability and research, notably due to being able to be debugged through Serial Wire Debug (depending on the security fusing).
Differences between retail/production devices
- These devices may have design differences compared to the final model, depending on the stage and device model.
- These devices typically have engravings on the side, front, and/or back to indicate the stage, asset tag, and serial number.
- These devices may contain stickers regarding configuration/security notes, X'd out FCC or model information, or blank engravings.
- These devices may have a model number that starts in
99and is an APN. - These devices may run pre-release, internal, and/or factory builds of iOS.
- Some prototypes, particularly earlier ones, may include unreleased features.
- Prototypes that have non-production fuse configurations cannot be restored or updated normally due to the public TATSU signing server denying authorization to install production builds.
Stages
Common stages for Prototypes (in chronological order) are:
- DROP# (Non-(or minimally) functional devices)
- PROTO# (Usually PROTO0-2, sometimes shortened to P)
- These devices are Development Fused (CPFM00).
- These devices usually run SwitchBoard.
- PROTO3/4 are usually only found in earlier devices.
- These devices may have unreleased/cut features.
- EVT (Engineering Validation/Verification Testing)
- On modern devices, this stage is typically just marked as "EVT".
- On older/legacy devices, there might be a letter or a number added:
- EVT# (Usually EVT1-4)
- EVTX (Usually EVTA-C)
- These devices are usually Development fused (CPFM01), occasionally being CPFM00.
- These devices usually run SwitchBoard but also run InternalUI in some cases.
- These devices may have unreleased/cut features.
- CRB (Carrier Research Build)
- This stage is only known to be on iPhones
- It is for Cellular development and regulatory certifcation.
- These devices usually run SwitchBoard or InternalUI.
- These devices are usually Development fused (CPFM01), but have been known to be Production fused (CPFM03) for older devices.
- This stage is notably between EVT and DVT, starting with the iPhone 6.
- The design and features are usually finished by this stage.
- DVT (Design Validation/Verification Testing)
- On modern devices, this stage is typically just marked as "DVT".
- On older/legacy devices, there might be a letter or a number added:
- DVT# (Usually DVT1-4)
- DVTX (Usually DVTA-C)
- Like with EVT devices, they usually run SwitchBoard or InternalUI
- These devices are usually Development fused (CPFM01), occasionally being Insecure Fused (CPFM00), or Production fused (CPFM 03)
- The design and features are usually finished by this stage.
- PVT (Production Validation/Verification Testing)
- These devices are identical to Production, except they may run SwitchBoard.
- These devices are usually Production Fused (CPFM03).
- The design and features are finished by this stage, at this point, they are almost always identical to production.
- PVTe (Sometimes shortened to PE), Internal devices
- These devices are often identical to Production, except they may run SwitchBoard or InternalUI.
- These devices can sometimes be Development Fused (CPFM01).
- The design and features are finished by this stage, at this point, they are almost always identical to production, aside from having Internal markings and fusings.
- MP (Mass Production)
- These devices are (usually just testing devices and/or factory rejected retail units.
- these devices usually run Switchboard.
- These devices usually are Production Fused (CPFM03).
- PRQ (Post-RAMP Quality) devices are used for internal testing
- These devices are identical to Production, except they may run SwitchBoard or InternalUI.
- These devices can sometimes be Development Fused (CPFM01).
- ORT (Ongoing Reliability Testing)
- These devices are identical to Production and usually run iOS.
- These devices are usually Production Fused (CPFM03).
In addition, there is also:
- LBU (Line Bring Up), not necessarily a stage in itself, but a stage used to test and develop factory lines.
- OVB (Operate Verification Test)
- OVT (Operation Validation Build)
- PRB (Program Readiness Build)
- FRB (Factory Readiness Build)
Watch this video to learn more.
Software
These device often run the following internal software:
NonUI - Seen on every known stage, except DROP, used for hardware testing.
InternalUI - Typically seen on DVT and PVTe, rarely EVT, used primarily for software testing.
CarrierOS - sometimes seen on CRB/DVT units, which are typically used for Cellular testing by Carriers and regulatory authorities.
Diags - Present on the vast majority of units not running InternalUI or CarrierOS, including units that only boot to Recovery Mode.
These devices can also sometimes be running release iOS (including betas and internal builds that are compiled as release builds), or no OS at all (due to obliteraiton or failure to run one in the factory)
Fusings
As mentioned before, prototypes tend to have different security fusings than production devices, due to their developmental nature, as Apple has to debug them for testing purposes. More information is available here.
Fusing can be explained as:
CPFM 00: This allows for SEP debugging aswell as AP debugging. This is typically seen on PROTO (or EVT in earlier devices) stage devices, but has also been seen on later devices occasionally.
CPFM 01: This allows for AP debugging, but disallows SEP debugging. This is typically seen on EVT, DVT, or PVTe stage devices, but can also be rarely found on later (MP) devices. However, as of the A14 SoC, this has been disallowed via Debug Auth.
CPFM 03: This is standard fusing, which is on most PVT and MP devices (with a few execeptions), and can also be on PVTe and DVT devices (for unknown reasons). This disallows for any low level debugging. However, with BootROM exploits, such as checkm8, it can be reenabled and used with a SWD cable, such as the Kanzi cable.