4. Tutorials
The tutorials take you through complete cases, from the input file to the results in ParaView. Each one starts from a packaged example, so no mesh generation is needed, and each one says what you will learn, what the problem is, which settings matter and how to read the results.
| Tutorial | Interface | Solver | What it shows |
|---|---|---|---|
| Transonic flow over the RAE 2822 airfoil using the CLI | CLI | 2D, density-based, SA RANS | Running a deck, the settings a shock needs, a monitor-based stop, Mach field and surface pressure in ParaView against wind-tunnel data |
More tutorials will be added to this list.
Before you start a tutorial
Solver. Install Wake CFD and check that the solver runs — see Installation. Use the 2D executable (wake_2d_mixed) for 2D cases and the 3D executable (wake_3d_mixed) for 3D cases; the input file says which in analysis.dimension.
ParaView. The results are written as VTK files (.pvtu / .vtu) and read in ParaView, version 5.10 or later.
Tutorial files. The files of each tutorial are in the examples that come with the solver, in shared/examples/ of the installation folder. Each tutorial lists the files it uses.
Working directory. Wake CFD reads the mesh relative to the input file and writes the results into a new folder next to it (<input name>_001/, then _002/, …). Copy the tutorial folder to a working location before running it, keep the files inside it together, and run the solver in that folder. The installed examples then stay unchanged.
Checking a deck. --validate checks an input file without running it and reports any error with its location in the file:
wake_2d_mixed case.jsonc --validateStopping a run. Ctrl+C stops a run gracefully: the solver finishes the current iteration and writes its output. See Controlling a run.