We have 45,000 LP502030-PCM-NTC-LD-A02554 - EEMB - Lithium Battery Rectangular 3.

7V 250mAh Rechargeable in
stock now. Starting at $0.034. This EEMB part is fully warrantied and traceable.

00000005981LF-000
LQS30A48-5V0RANY
EOS Power EMBEDDED POWER
ARTESYN

Buy Now
Buy Now

Looking for a discount?

Check out our current promotions!

Give us a call

1-855-837-4225 1-415-281-3866
International: 1-415-281-3866
1-555-555-5555

Arrow
Arrow Electronics,
Electronics, Inc
Verical Division
9201 East Dry Creek Road
P.O. Box 740970
Centennial,
Los Angeles, CO 80112
CA 90074-0970

This coversheet was created by Verical, a division of Arrow Electronics, Inc. (“Verical”). The attached document was created by the part supplier,
not Verical, and is provided strictly 'as is.' Verical, its subsidiaries, affiliates, employees, and agents make no representations or warranties
regarding the attached document and disclaim any liability for the consequences of relying on the information therein. All referenced brands,
product names, service names, and trademarks are the property of their respective owners.
 Quarter-Brick Series
Single output

DC-DC CONVERTERS High Current, High y, Low 1

• Ultra high e ciency topology NEW Product

• Unprecedented useable output power levels
• High power density (200 W/in 3 ) open-frame technology

• Wide ambient temperature range, -40 ºC to +85 ºC

• 80% to 110% output trim
• Monotonic start-up in normal and prebiased loads
• Basic insulation system
• Overvoltage and overtemperature protection
• Secondary side control, no optocouplers,
fast transient response
• 100 V, 100 ms input transient rated
• Available RoHS compliant
This is a new high e ciency, open-frame, low pr single board, isolated dc-dc converter
series in an industry standard quarter-brick package that provides up to 200 W of output power.
The series delivers very high output current at low voltages, and excellent useable power for
today’s high performance applications. The series features two input voltage ranges of 18 Vdc
to 36 Vdc and 36 Vdc to 75 Vdc and is available with output voltages of 1.2 V, 1.5 V, 1.8 V,
2.5 V, 3.3 V and 5 V. The output voltage is adjustable from 80% to 110% of the nominal value.
The series also has a remote ON/OFF capability. Overcurrent, overvoltage and overtemperature
protection features are included as standard. Full international safety approval including
EN60950-1 VDE and UL/cUL60950, reduces compliance costs and time to market. 2 YEAR WARRANTY

All are typical at nominal input, full load at 25 °C ambient unless otherwise stated SPECIFICATIONS

OUTPUT SPECIFICATIONS EMC CHARACTERISTICS

Volta ge a djus ta bility 8 0 % to 1 1 0 % Immunity:
ESD air enclosure EN61000-4-2 8 kV/6 kV(O/P within spec.)
M inimum loa d 0% Radiated enclosure EN61000-4-3 10 V/m (O/P within spec.)
Overshoot At turn-on and turn-o None Conducted EN61000-4-6 10 V (O/P within spec.)
Input transients 100 V, 100 ms
U nd e r s ho o t N o ne
GENERAL SPECIFICATIONS
Tra ns ie nt re s pons e 7 0 mV,
(S e e N ote 1 ) typ. de via tion Basic insulation Input/output 2250 Vdc
20 µs recovery
S witc hing fre que nc y F ix e d 480 kH z
INPUT SPECIFICATIONS Approvals and (See Note 3) EN60950-1 VDE
Input voltage range 24 V nominal 18-36 Vdc s ta nda rds U L /c U L 6 0 9 5 0
48 V nominal 36-75 Vdc M a te ria l fla mma bility U L 9 4 V- 0
Input current No load 85 mA to 150 mA We ight 3 7 g (1 . 3 0 oz )
Remote OFF 5 mA
MTBF Telcordia Tech SR-332 3,866,933 hours
Active high remote ON/OFF
Logic compatibility Open collector ref to -input ENVIRONMENTAL SPECIFICATIONS
ON O pe n c irc uit or >2 . 4 V dc
OFF <0 . 4 V d c Thermal performance Operating ambient, -40 °C to +85 °C
temperature
Undervoltage lockout Power up 35.5 V (typ.)
Power down 33.5 V (typ.) Non-operating -55 °C to +125 °C

Start-up time Power up 10 ms (typ.) PROTECTION

(See Note 2) Remote ON/OFF 10 ms (typ.)
S hort- c irc uit C ontinuous
O ve rvolta ge N on- la tc hing
T he r m a l 1 2 5 ºC hot s pot te mpe ra ture
with automatic recovery

International Safety Standard Approvals

UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950
File No. E135734/60950
VDE No. 10401-3336-0197

File Name: quarter_brick_single.pdf Rev (07): 17 Nov 2005

 Quarter-Brick Series
Single output

DC-DC CONVERTERS High Current, High Efficiency, Low Profile 2

For the most current data and application support visit [Link]/powergroup/[Link] NEW Product

INPUT INPUT OUTPUT REGULATION

OUTPUT EFFICIENCY MODEL
CURRENT RIPPLE CURRENT SET POINT RIPPLE &
VOLTAGE (TYP.) LINE LOAD NUMBER (6,9,10)
(MAX.) (4) CURRENT (5) (MAX.) ACCURACY NOISE
(Max.) (pk - pk)
48 Vin VALUE MODELS
1.2 V 1.92 A 150 mA 50 A 88.5% ±1.5% ±0.1% ±0.2% 60 mV LQS50A48-1V2J
1.5 V 2.36 A 150 mA 50 A 89.5% ±1.5% ±0.1% ±0.2% 60 mV LQS50A48-1V5J
1.8 V 2.82 A 150 mA 50 A 90.4% ±1.5% ±0.1% ±0.2% 60 mV LQS50A48-1V8J
48 Vin PERFORMANCE MODELS
1.2 V 4.05 A 250 mA 100 A 86.0% ±1.5% ±0.1% ±0.2% 60 mV LQS100A48-1V2J
1.5 V 3.8 A 200 mA 80 A 88.8% ±1.5% ±0.1% ±0.2% 60 mV LQS80A48-1V5J
1.8 V 4.6 A 200 mA 80 A 90.0% ±1.5% ±0.1% ±0.2% 60 mV LQS80A48-1V8J
2.5 V 4.1 A 200 mA 50 A 90.0% ±1.5% ±0.1% ±0.2% 60 mV LQS50A48-2V5J
3.3 V 5.2 A 200 mA 50 A 91.0% ±1.5% ±0.1% ±0.2% 60 mV LQS50A48-3V3J
48 Vin ULTRA MODELS
1.5 V 4.8 A 200 mA 100 A 88.5% ±1.5% ±0.1% ±0.2% 60 mV LQS100A48-1V5J
1.8 V 5.7 A 200 mA 100 A 89.5% ±1.5% ±0.1% ±0.2% 60 mV LQS100A48-1V8J
2.5 V 6.2 A 200 mA 80 A 91.0% ±1.5% ±0.1% ±0.2% 60 mV LQS80A48-2V5J
3.3 V 6.2 A 200 mA 60 A 91.0% ±1.5% ±0.1% ±0.2% 60 mV LQS60A48-3V3J
5V 6.2 A 200 mA 40 A 92.0% ±1.5% ±0.1% ±0.2% 60 mV LQS40A48-5V0J (7)
24 Vin MODELS
1.8 V 3.4 A 200 mA 30 A 91.0% ±1.5% ±0.1% ±0.2% 60 mV LQS30A24-1V8J
3.3 V 6.5 A 300 mA 30 A 89.5% ±1.5% ±0.1% ±0.2% 60 mV LQS30A24-3V3J

Part Number System with Options

LQS60A48-3V3RANJ

L = Low Profile RoHS Compliance (9)

J = Pb-free (RoHS 6/6 compliant)
Q = 1/4 Brick Pin Length Options
Blank = 0.188” (4.78 mm)
Type of output N = 0.145” (3.68 mm)
S = Single K = 0.110” (2.79 mm)
Body Height, Package Type and Pin Length
Rated Output Current
A = 0.300” (7.62 mm), Through Hole,
40 A = 40 Amps, 60 A = 60 Amps etc.
0.188” (4.78 mm) Pins
E = 0.340” (8.64 mm), Through Hole,
Nominal Rated Input Voltage 0.188” (4.78 mm) Pins
24 = 24 Volts (18 Vdc to 36 Vdc range) S = 0.28” (7.11 mm), Surface Mount(6)
48 = 48 Volts (36 Vdc to 75 Vdc range)
Remote ON/OFF Logic
Output Voltage Blank = Positive
1V5 = 1.5 Volts, 1V8 = 1.8 Volts etc. R = Negative

Notes
1 di/dt = 1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 50% to 75% lo 7 Except LQS40A48-5V0J which has the double output pins.
max. and 75% to 50% lo max. Deviation varies by model. For further 8 Active low Remote ON/OFF is available. Standard product is Active
details see longform datasheet. High. When ordering active low parts, designate with the Suffix ‘R’ e.g.
2 Start-up into resistive load. LQS100A48-1V8RAJ.
3 This product is only for inclusion by professional installers within other 9 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
equipment and must not be operated as a stand alone product. special request, please contact your local sales representative for details.
4 Recommended input fusing is up to 10 A HRC 200 V rated fuse. 10 NOTICE: Some models do not support all options. Please contact your
5 Peak to peak measured without external π filter. Significant reduction local Artesyn representative or use the on-line model number search tool
possible with external filter. See Application Note 141 for further details. at [Link] to find a suitable
alternative.
6 ‘S’ option applies to the 24 V models only.

File Name: quarter_brick_single.pdf Rev (07): 17 Nov 2005

 Quarter-Brick Series
Single output

DC-DC CONVERTERS High Current, High Efficiency, Low Profile 3

For the most current data and application support visit [Link]/powergroup/[Link] NEW Product

2.30 (58.4)
2.30
2.000 (50.80) (58.4) 0.055 (1.40) x 0.105 (2.67)
2.186 (8 pls)
0.15 (55.52)
(3.8) 0.057±0.020
ø0.040 ±0.002 (ø1.02 ±0.05) (1.45±0.51)
(6 pls) 0.150
TOP VIEW
(3.81)
0.300
1 8
0.300
1 8
TOP VIEW 7 1.45 (7.62) 7
1.45 (7.62) 2
2 6 (36.8) 6
(36.8) 0.300 5
5
(7.62) 3 4
3 4 0.300 0.150
0.150 (3.81)
(7.62)
(3.81) 0.150
(3.81)
0.725±0.020
0.725 ±0.020
(18.42 ±0.51) ø 0.062 ±0.002 (18.42±0.51)
(ø1.57 ±0.05) HEIGHT
(2 pls) 0.28 (7.1)

HEIGHT
CLEARANCE (See Option Table) CLEARANCE
(See Option Table) 0.015 (0.38)
0.188 (4.78)
ø0.080±0.008
ø0.058±0.008 (ø2.03±0.02)
2.30 (58.4)
(ø1.47±0.02) (2 pls)
2.30 Ref IPC-2222
(6 PLS)
2.000 (50.80) Ref IPC-2222 (58.4) Level B
0.15
2.186
Level B
(3.8) 0.057±0.020 (55.52) 0.067(1.70) x 0.118(3.00)
(1.45±0.51) (8 pls)
0.150
TOP VIEW (3.81)
1 8 1 8
0.300 0.300
7 7
1.45 (7.62) 1.45 (7.62)
2 6 2 6
(36.8) 0.300 (36.8)
(7.62)
5 5
3 4 0.150
3 4
0.300 0.150
(3.81) 0.150 (7.62) (3.81)
(3.81)
0.725±0.020 0.15 Lead coplanarity within 0.006 (0.15) max.
0.725 ±0.020
ø 0.074 ±0.003 (3.8)
(18.42 ±0.51) ø 0.054 ±0.003 (18.42±0.51) 2.000
(ø1.37 ±0.08) (ø1.88 ±0.08) Dimensions in Inches (mm) Dimensions in Inches (mm)
(50.80)
(6 pls) (2 pls) Tolerances (unless otherwise specified) Tolerances (unless otherwise specified)
[Link] ±0.02 (x.x ±0.5) [Link] ±0.02 (x.x ±0.5)
RECOMMENDED HOLE PATTERN [Link] ±0.010 ([Link] ±0.25) RECOMMENDED PCB LAYOUT [Link] ±0.010 ([Link] ±0.25)

24 V/48 V Mechanical Drawing for Output Current of 50 A or Less 24 V Surface-mount Mechanical Drawing and Pinout Table
(See Note 7)

PIN CONNECTIONS DIMENSION OPTIONS

PIN NUMBER FUNCTION PIN NUMBER FUNCTION OPTION CLEARANCE HEIGHT

1 +Vin 5 -Sense +0.022 (0.56)

±0.016 (0.41)
2 ON/OFF 6 Trim -0.030 (0.76)

3 -Vin 7 +Sense A 0.030 (0.76) 0.300 (7.62)

4 -Vout 8 +Vout E 0.070 (1.78) 0.340 (8.64)

Pin Connection Table Dimension Options Table

File Name: quarter_brick_single.pdf Rev (07): 17 Nov 2005

 Quarter-Brick Series
Single output

DC-DC CONVERTERS High Current, High Efficiency, Low Profile 4

For the most current data and application support visit [Link]/powergroup/[Link] NEW Product

2.30 (58.4)

2.000 (50.80)
0.118
0.15
(3.00) ø 0.040 ±0.002
(3.8)
(ø1.02 ±0.05)
(6 pls)

0.300
1.45 (7.62)
TOP VIEW
(36.8) 0.300
(7.62)
0.150
0.150
(3.81)
(3.81)

0.725 ±0.020
(18.42 ±0.51) ø0.062 ±0.002
(ø1.57 ±0.05)
(4 pls)

CLEARANCE
(See Option Table) HEIGHT
(See Option Table)
0.188 (4.78)
2.30 (58.4)
0.15
2.000 (50.80)
(3.8)
0.118
(3.00)

0.300
1.45 (7.62)
(36.8) 0.300
(7.62)
0.150
(3.81) 0.150
(3.81)

0.725 ±0.020 ø 0.074 ±0.003

(18.42 ±0.51) ø 0.058 ±0.008 (ø1.88 ±0.08) (4 pls) Dimensions in Inches (mm)
(ø1.47 ±0.02) (6 pls) Ref IPC-2222 Level B Tolerances (unless otherwise specified)
Ref IPC-2222 Level B [Link] ±0.02 (x.x ±0.5)
[Link] ±0.010 ([Link] ±0.25)
RECOMMENDED HOLE PATTERN

48 V Mechanical Drawing for Output Current Greater than 50 A

“The Double P” Pinout (7)

PIN CONNECTIONS DIMENSION OPTIONS

PIN NUMBER FUNCTION PIN NUMBER FUNCTION OPTION CLEARANCE HEIGHT

1 +Vin 6 -Sense +0.022 (0.56)

±0.016 (0.41)
2 ON/OFF 7 Trim -0.030 (0.76)

3 -Vin 8 +Sense A 0.030 (0.76) 0.300 (7.62)

4 -Vout 9 +Vout E 0.070 (1.78) 0.340 (8.64)

5 -Vout 10 +Vout

Pin Connection Table Dimension Options Table

Datasheet © Artesyn Technologies® 2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.

Please consult our website for the following items:
Application Note
Longform Datasheets [Link]
File Name: quarter_brick_single.pdf Rev (07): 17 Nov 2005