0% found this document useful (0 votes)
34 views8 pages

Schneider Electric - Altivar-312-Variable-Frequency-Drives-VFD - ATV312HU40N4

Uploaded by

stephen.s
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
34 views8 pages

Schneider Electric - Altivar-312-Variable-Frequency-Drives-VFD - ATV312HU40N4

Uploaded by

stephen.s
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Product data sheet

Specifications

variable speed drive, ATV312, 5 HP,


9.2 kVA, 150 W, 380 to 500 V 3
phase supply
ATV312HU40N4

notification_critical_stroke Discontinued on: Feb 17, 2021

Discontinued - Service only


notification_critical_stroke To be end-of-service on: Jan 1, 2026
notification_critical_stroke
Product availability: Non-Stock - Not normally stocked in
distribution facility

Main

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Range of Product Altivar 312

Product or Component Type Variable speed drive

Product destination Asynchronous motors

Product Specific Application Simple machine

Assembly style With heat sink

Component name ATV312

Motor power kW 4 kW

Maximum Horse Power Rating 5 hp

[Us] rated supply voltage 380...500 V - 15...10 %

Supply frequency 50...60 Hz - 5...5 %

Phase 3 phase

Line current 13.9 A 380 V, Isc = 5 kA


10.6 A 500 V

EMC filter Integrated

Apparent power 9.2 kVA

Maximum transient current 14.3 A 60 s

Power dissipation in W 150 W at nominal load

Speed range 1…50

Asynchronous motor control Sensorless flux vector control with PWM type motor control signal
profile Factory set : constant torque

Electrical connection Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.004 in² (2.5
mm²) AWG 14
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.008 in² (5 mm²) AWG 10

Supply Internal supply for logic inputs 19...30 V 100 mA overload and short-circuit protection
Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V 10 mA
overload and short-circuit protection

Communication Port Protocol Modbus


CANopen

IP degree of protection IP20 on upper part without cover plate


IP21 on connection terminals
IP31 on upper part
IP41 on upper part

Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

Jan 3, 2025 1
Option card Communication card CANopen daisy chain
Communication card DeviceNet
Communication card Fipio
Communication card Modbus TCP
Communication card Profibus DP

Complementary
Supply voltage limits 323…550 V

Prospective line Isc 5 kA

Continuous output current 9.5 A 4 kHz

Output frequency 0…500 Hz

Nominal switching frequency 4 kHz

Switching frequency 2...16 kHz adjustable

Transient overtorque 170…200 % of nominal motor torque

Braking torque 150 % 60 s with braking resistor


100 % with braking resistor continuously
150 % without braking resistor

Regulation loop Frequency PI regulator

Motor slip compensation Suppressable


Automatic whatever the load
Adjustable

Output voltage <= power supply voltage

Tightening torque Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.3 lbf.in (0.6 N.m)
L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 10.6 lbf.in (1.2 N.m)

Insulation Electrical between power and control

Analogue input number 3

Analogue input type AI1 configurable voltage 0...10 V 30 V max 30000 Ohm
AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm
AI3 configurable current 0...20 mA 250 Ohm

Sampling duration AI1, AI2, AI3 8 ms analog


LI1...LI6 4 ms discrete

Response time AOV, AOC 8 ms analog


R1A, R1B, R1C, R2A, R2B 8 ms discrete

Linearity error +/- 0.2 % output

Analogue output number 1

Analogue output type AOC configurable current 0...20 mA 800 Ohm 8 bits
AOV configurable voltage 0...10 V 470 Ohm 8 bits

Discrete input logic Logic input not wired LI1...LI4), < 13 V


Negative logic (source) LI1...LI6), > 19 V
Positive logic (source) LI1...LI6), < 5 V, > 11 V

Discrete output number 2

Discrete output type Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
Configurable relay logic R2A, R2B) NC - 100000 cycles

Minimum switching current R1-R2 10 mA 5 V DC

Maximum switching current R1-R2 2 A 250 V AC inductive, cos phi = 0.4 7 ms


R1-R2 2 A 30 V DC inductive, cos phi = 0.4 7 ms
R1-R2 5 A 250 V AC resistive, cos phi = 1 0 ms
R1-R2 5 A 30 V DC resistive, cos phi = 1 0 ms

Discrete input number 6

Discrete input type LI1...LI6) programmable 24 V, 0…100 mA PLC 3500 Ohm

2 Jan 3, 2025
Acceleration and deceleration S, U or customized
ramps Linear adjustable separately from 0.1 to 999.9 s

Braking to standstill By DC injection

Protection type Input phase breaks drive


Line supply overvoltage and undervoltage safety circuits drive
Line supply phase loss safety function, for three phases supply drive
Motor phase breaks drive
Overcurrent between output phases and earth (on power up only) drive
Overheating protection drive
Short-circuit between motor phases drive
Thermal protection motor

Insulation resistance >= 500 mOhm 500 V DC for 1 minute

Local signalling for drive voltage 1 LED (red)


for CANopen bus status four 7-segment display units

Time constant 5 ms for reference change

Frequency resolution Analog input 0.1...100 Hz


Display unit 0.1 Hz

Connector type 1 RJ45 Modbus/CANopen

Physical interface RS485 multidrop serial link

Transmission frame RTU

Transmission Rate 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
4800, 9600 or 19200 bps Modbus

Number of addresses 1…127 CANopen


1…247 Modbus

Number of drive 127 CANopen


31 Modbus

Marking CE

Operating position Vertical +/- 10 degree

Outer dimension 215 x 185 x 158 mm


184 x 140 x 150 mm
402 x 239 x 192 mm

Height 7.2 in (184 mm)

Width 5.6 in (142 mm)

Depth 6.0 in (152 mm)

Net Weight 6.8 lb(US) (3.1 kg)

Environment
Dielectric strength 2410 V DC between earth and power terminals
3400 V AC between control and power terminals

Electromagnetic compatibility 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to
IEC 61000-4-3

Standards IEC 61800-3


IEC 61800-5-1

Product Certifications CSA


C-tick
DNV
NOM
GOST
UL

Pollution degree 2

Protective treatment TC

Jan 3, 2025 3
Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance 15 gn 11 ms EN/IEC 60068-2-27

Relative humidity 5…95 % without condensation IEC 60068-2-3


5…95 % without dripping water IEC 60068-2-3

Ambient Air Temperature for -13…158 °F (-25…70 °C)


Storage
Ambient air temperature for 14…122 °F (-10…50 °C) without derating with protective cover on top of the drive)
operation 14…140 °F (-10…60 °C) with derating factor without protective cover on top of the
drive)

Operating altitude <= 3280.84 ft (1000 m) without derating


3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m

Ordering and shipping details


Category US1CP4B22152

Discount Schedule CP4B

GTIN 3606480077654

Returnability No

Country of origin ID

Packing Units
Unit Type of Package 1 PCE

Number of Units in Package 1 1

Package 1 Height 8.19 in (20.791 cm)

Package 1 Width 8.55 in (21.71 cm)

Package 1 Length 8.59 in (21.828 cm)

Package 1 Weight 6.947 lb(US) (3.151 kg)

Unit Type of Package 2 S06

Number of Units in Package 2 12

Package 2 Height 28.94 in (73.5 cm)

Package 2 Width 23.62 in (60.0 cm)

Package 2 Length 31.50 in (80.0 cm)

Package 2 Weight 103.6 lb(US) (47.0 kg)

Contractual warranty
Warranty 18 months

4 Jan 3, 2025
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain
partnerships, lower impact materials, and circularity via our ongoing “Use Better, Use
Longer, Use Again” campaign to extend product lifetimes and recyclability.

How this information helps you

Use Better

Materials and Substances

Pro-active compliance
EU RoHS Directive (Product out of EU RoHS legal
scope)

China RoHS Regulation China RoHS declaration

WARNING: This product can


expose you to chemicals
including: Lead and lead
compounds, which is known
to the State of California to
California proposition 65
cause cancer and birth
defects or other reproductive
harm. For more information
go to
www.P65Warnings.ca.gov

Use Again

Repack and remanufacture

Circularity Profile End of Life Information

The product must be


disposed on European Union
WEEE markets following specific
waste collection and never
end up in rubbish bins.

Jan 3, 2025 5
Product data sheet ATV312HU40N4

Image of product / Alternate images

Alternative

6 Jan 3, 2025
Product data sheet ATV312HU40N4

Jan 3, 2025 7
Product data sheet ATV312HU40N4

8 Jan 3, 2025

You might also like