ADITYA COLLEGE OF ENGINEERING AND TECHNOLOGY
No 2/9, Kamakshipura, Hesaraghatta Hobli, Yelahanka, Bengaluru- 560089
Affiliated to VTU, Belagavi | Approved by UGC/AICTE/Govt. of Karnataka , Bengaluru
ASSIGNMENT – 2
Academic Year 2023-24 Dept. ECE
Program BE Date of issue
Year / Semester /Sec 2nd
Course Code BESCK204C
Course Name Introduction to Electronics and communication
Note [Link] all the questions
2. Each question carries 10 marks.
1.
Explain operational amplifier as comparator and
differential amplifier
2. Explain ideal operational amplifier characteristics
3.
Explain operational amplifier configuration as Summing
amplifier ,inverting amplifiers,non inverting amplifiers
4. Explain i)voltage follower ii) integrator iii) differentiator
Convert the following:
i) (1 [Link])16= (?)10
5.
ii) ii) (110100111001.110)2 = (?)8
iii) (37.625)10=()2
iv) iv) ([Link])16=()2
v)255(10)=(?)16
Perform the following: i) (1010100)2 - (1000100)2 using
6.
1's complement and 2's complement method.
ii) (4456)10- (34234)10 using 9's complement and 10's
complement method.
Implement the following Boolean functions by using logic
gates : i) F1 = xy' + x'z ii) F2=x'y'z +x'yz+ xy'.
7.
Implement full adder circuit with its truth table and write
the sum and carry expressions.
Convert the following a) 3A6.C58D(16) = ? ()8
8.
b) 0.6875(10) = ? (2) c) Compute the 9’s compliment of
25.639(10) d) Compute the 1’s compliment of
11101.0110(2)
9
Implement half adder circuit with its truth table and write
the sum and carry expressions
10.
Explain the following Logic gates with symbol and truth
table
Course Outcomes (COs):
CO NO.
CO 1
CO 2
**Revised Bloom’s Taxonomy (RBT) Levels:
RBT Remember Understand Apply Analyze Evaluate Create
RBT Levels L1 L2 L3 L4 L5 L6
Prepared by
(Name of Faculty / Designation / Dept.& Sign)
ADITYA COLLEGE OF ENGINEERING AND TECHNOLOGY
No 2/9, Kamakshipura, Hesaraghatta Hobli, Yelahanka, Bengaluru- 560089
Affiliated to VTU, Belagavi | Approved by UGC/AICTE/Govt. of Karnataka , Bengaluru
ASSIGNMENT – I
Academic Year 2023-24 Dept. ECE
Program BE Date of issue
Year / Semester /Sec 2nd
Course Code BESCK204C
Course Name Basics Of Electronics
Note [Link] all the questions
2. Each question carries 10 marks.
Q. No. RBT**
Questions Marks COs*
level
1. 10 CO 1 L1
2. With neat block diagram explain the working of a DC power supply. Mention the L2
10 CO 1
principal components used in each block
3. Mention advantages of negative feedback in amplifier circuits. With relevant L3
10 CO 1
equations and diag Explain the concept of negative feedback
A 5 V zener diode has a maximum rated power dissipation of 500 mW. If the
diode is to be used in a simple regulator circuit to supply a regulated 5 V
4. 10 CO 1 L2
to a load having a resistance of 400 Ω, determine a suitable value of series
resistor for operation in conjunction with a supply of 9 V.
5. With neat circuit diag and waveforms explain the working of bridge wave rectifier 10 CO 1 L1
6. 10 CO2
What are multistage amplifiers. Name different types of coupling.
7. Explain voltage doublers and triplers 10 CO2 L2
An IC that produces an open loop gain of 100 is to be used as the basis of an
8. 10 CO2 L3
amplifier having voltage gain 20. Determine amount of feed back required
9 10 CO2 L2
10 10 CO2 L2
11 What are different types of multivibrators. Explain in detail. CO2 L2
12 10 L2
13. What is oscillator? Mention the condition for oscillations 10 CO 1 L1
14. With neat ckt diag describe the operation of crystal controlled oscillator 10 CO 1 L2
15.
Define the following with respect to amplifier: (i) Input resistance L3
10 CO 1
(ii) Amplifier gain (iii) Bandwidth (iv) Phase shift
16.
With suitable circuit diagram, explain single stage astable L2
10 CO 1
multivibrator using operational amplifier.
Discuss the need of filter circuit. With circuit diagram and
17 waveforms, brief out the operation of smoothing filter for full wave 10 CO 1 L1
rectifiers
18 Explain the operation of a simple shunt Zener voltage regulator. 10 CO2
19
What is voltage multiplier? With circuit diagram, explain the
operation of voltage doubler.
20 Explain the Barkhausen criteria for oscillations. 10 CO2 L2
10 CO2 L3
10 CO2 L2
10 CO2 L2
CO2 L2
10 L2
*Course Outcomes (COs):
CO NO.
CO 1
CO 2
**Revised Bloom’s Taxonomy (RBT) Levels:
RBT Remember Understand Apply Analyze Evaluate Create
RBT Levels L1 L2 L3 L4 L5 L6
Prepared by
(Name of Faculty / Designation / Dept.& Sign)
