Gasoline Injector Diagnosis Guide
Uploaded by
ScribdTranslationsGasoline Injector Diagnosis Guide
Uploaded by
ScribdTranslationsInjector
A
GASOLINE
DIAGNOSIS
Tools, equipment and
materials:
Scanner
Injector test bench
Multimeter
Key game
Screwdriver set
Self-clearing game
Injector cleaning boy
Anti-sulfation cleaner
OBD II Description
P0201 Control circuit of
injector No. 1
P0202 Control circuit of
injector No. 2
P0203 Control circuit of
injector No. 3
P0204 Control circuit of
injector No. 4
INJECTOR CODES
IN SCANNER
The oscilloscope is a
measuring instrument that
present on a screen
a graphic image of a
electrical signal that is
repeat in time and to that
the image is referred to as
waveform.
THE OSCILLOSCOPE
Measure
Measure of time
of The measure
voltage of times
For the it is used the
measure of scale
voltages horizontal
with a del
oscilloscope oscilloscope
I have (x-axis).
to count This includes
the number the measure
de of periods,
divisions width of
verticals impulses and
what occupies time of
the signal in rise and
the screen drop of
(Y axis) impulses.
MEASURE ABOUT THE INJECTORS
DEPENDING ON THE INJECTION SYSTEM USED, THE INJECTORS
They can be fed in three different ways:
Check that the harness of the
the injector should not be sulfated,
rusty or broken,
clean it with a liquid for
clean contacts
electric or replace it.
VISUAL INSPECTION
Wash the injectors every
10,000 Km to eliminate the
dirt from the injector with
a buoy for cleaning
injectors.
MAINTENANCE
Check that the pressure of the
fuel that reaches the
injectors to be the indicated one
in the manual, for
discard that others
devices have a failure
like the gas pump,
the pressure regulator or
the fuel filter
it is dirty.
INJECTOR TEST
Put a tip of the
ohmmeter in the casing of the
injector and the other end in
the injector coil for
check that the injector
not landed, in
in case it is replaced
the injector.
VERIFY
Utiliza un banco de
injector tests
to review the
injector conditions
(leaks, dirt,
operation.
TEST BANK
UNIFORMITY TEST OF
SPRAYING
TEST OF HERMETICITY
FLOW RATE
ULTRASONIC CLEANING
After completing the 3 When a
first tests to see maintenance is
if the injectors are in It is necessary to change the filter.
the optimal conditions, and the urine of each
otherwise carry out a injector.
change.
RECOMMENDATIONS
