FORMULAS

AUTOMOTIVES

ALL THE FORMULAS IN THIS MANUAL WERE

COLLECTED FROM THE TOTAL SENT, GATHERING THUS,
THE ONES RELATED TO AUTOMOTIVE FOR YOU
MAJOR COMFORT
 AUTOMOTIVE FORMULAS

ANTICORROSIVE FOR BODYWORK (ASPHALTED)

2. LOOSEN NUTS
3. CARPET AND UPHOLSTERY CLEANER
4. ANTI-OXIDANT, RADIATOR COOLANT
5. INDUSTRIAL CLEANING CREAM FOR HANDS
6. BIODEGRADABLE POWDER DETERGENT
7. GLASS CLEANER
Metal Cleaner
9. OIL FOR INTERNAL CLEANING OF GASOLINE ENGINES
10. GLUE FOR GLASS AND METAL
11. PASTA TO AVOID BLOATING
12. GLASS CLEANER
13. CHAIN LUBRICANT
14. LIQUID METAL CLEANER
15. AIR CONDITIONER CLEANER
16. RADIATOR CLEANER
Car Body Shampoo
18. CARBURETOR CLEANER
19. DEGREASER FOR MECHANICS
20. UNIVERSAL DEGREASER
21. GEL DEGREASER
22. ANTI-FOG WINDOW CLEANER
23. LIQUID CARPET CLEANER
24. UNIVERSAL BRIGHTENER
25. CAR WASH SHAMPOO
26. FORMULAS TO MANUFACTURE THINNER OR THINNER
27. REFINING OF AUTOMOTIVE OIL
28. SPECIAL DEGREASING CLEANER CREAM FOR
MECHANICS
29. UPHOLSTERY SHAMPOO
30. RENOVADOR DE ACUMULADORES “LIQUIDO”
31. BATTERY REJUVENATOR 'IN POWDER'
32. CLEAN RADIATORS
33. PISTON SEALER
CAR WAX
Vinyl Brightener
36. SELF-POLISHING GEL WAX FOR CARS
37. DEGREASER FOR METALS
38. ANOTHER DEGREASING CREAM FOR HANDS
39. DEGREASER FOR ENGINES AND INDUSTRIAL PARTS IN
CREAM
40. FORMULAS FOR TRANSPARENT LACQUER FOR VEHICLES
41. LIQUID WAX FOR AUTOMOBILES "NEUTRAL"
42. CAR WAX IN PASTE 'NEUTRAL'
43. FORMULA FOR ANTI-CORROSIVES IN OIL
44. ANOTHER ANTI-CORROSIVE FORMULA
DEGREASING SOAP
1 - ANTI-CORROSIVE FOR BODIES (ASPHALTED).

A very modern product is obtained, with high anti-corrosive power, widely used.
in workshops, which extends the life of your vehicle. No sprayer needed.
special, can be applied with a brush and is not affected by high
temperatures, nor does it crack over time, as happens with other products
existing in the market.

FOR 100Kg. OF ANTI-CORROSIVE ASPHALT

LIQUID ASPHALT (TAR) 50,00 Kg.

Soda Ash Powder 5.00 Kg.
CALCIUM CARBONATE POWDER 2.50 Kg.
POWDERED PUMICE STONE 2.50 Kg.
XYLENE SOLVENT 40,00 Kg.

Note: This product must be packaged in plastic or metal drums, but

Wide-mouthed.

2. – LOOSEN NUTS.

The following formula allows the production of a liquid widely used in workshops.
mechanical and industrial tools to loosen nuts and tools stuck by the
oxide. The use of these spray-packaged products is normal; it could be
perfectly used through application with a brush, which allows
drastically reduce costs.

Note: The reader who wishes to package this or other products in a spray can do so.
Contact Spray Química, whose phone numbers appear in the list of
suppliers.

FOR 100 Kg. OF NUT UNLOADING

Pine Turpentine 70,00 Kg.

DEODORIZED KEROSENE 20.00 Kg.
BUTANOL 10,00 Kg.

3. - CARPET AND UPHOLSTERY CLEANER

It is an efficient cleaning product for washing carpets, upholstery

furniture and vehicles, remove the dirt that is embedded no matter how difficult it is
it seems, just spray and scrub with a brush, it is important to select the
the most appropriate color and smell, to facilitate its sale.
 FOR 100 Kg. OF UPHOLSTERY CLEANER

DISTILLED WATER 76,50 Kg.

Diethylene Glycol 20.00 Kg.
ISOPROPYL ALCOHOL 2.00 Kg.
S.T.P.P. (MR) 0, 1 Kg.
Acetic Acid 0.1 Kg.
Dye and fragrance A/G

4. - ANTIOXIDANT, RADIATOR COOLANT.

With this formula, a modern concentrated liquid is prepared that prevents the
oxidation, corrosion, deposits in the engine and radiator, apart from its
excellent qualities as refrigerants. It is a very widely used liquid now
due to high ambient temperatures and salts and impurities
contained in the water currently used in the radiator, this liquid
it prevents water hardness from depositing and forming incrustations on the
radiator and engine.

FOR 100 Kg. OF ANTI-OXIDANT

DISTILLED WATER 84,50 Kg.

Sodium Purpurate 5,00 Kg.
Acetic Acid 0.50 Kg.

5 – INDUSTRIAL CLEANING CREAM FOR HANDS.

A cream for removing grease and all types of dirt from the hands is obtained with
just spread and rub them, then you can clean them with a cloth,
leaving the hands clean. This product is widely used in workshops.
mechanical due to their important industrial use and ease of application, it can
add perfume and color if you wish.

FORMULA # 1

DEODORIZED KEROSENE 3,70 Kg.

MINERAL OIL 3,00 Kg.
Fatty acid 6,50 Kg.
METHANOL 1,00 Kg.
Propanol 1.00 Kg.

FORMULA # 2
 COCONUT AMINA PRIMARY 0.50 Kg.
TERTIARY COCONUT AMINE 2.20 kg.
ETHYLENE GLYCOL 2, 27 Kg.
ETOXIFENOL 10 8, 80 Kg.
WATER 42,00 Kg.

PROCEDURE: Carry out both formulas separately and then pour one.
about the other, constantly stirring until a cream is formed
homogeneous and smooth. Add fragrance if desired.

6 – BIODEGRADABLE POWDER DETERGENT FOR WASHING.

This procedure results in a modern biodegradable detergent.

in powder form of high cleaning power, softens and disinfects, it is a
detergent with characteristics similar to those of the top brands
market. One of the advantages is that it is prepared by simply mixing all
its components in a very fine powder state.

FOR 100 Kg. OF POWDERED DETERGENT

NEUTRAL LAURYL ACID 5,00 Kg.

Sodium bicarbonate powder 60,00 Kg.
Sodium silicate 15,00 Kg.
S.T.P.P. (MR) 18,80 Kg.
Carboxyethyl cellulose 1.00 Kg.
LAVENDER PERFUME 0.20 Kg.

7. – GLASS CLEANER.

A modern liquid is obtained that does not stain or cloud and possesses excellent
cleaning effect, leaving the glass completely transparent and shiny,
this product must be applied using a sprayer and then dried with a
dry and clean cloth.

FOR 100 Kg. OF GLASS CLEANER

DISTILLED WATER 78,50 Kg.

ISOPROPYL ALCOHOL 20,00 Kg.
ETOXIFENOL 10 (MR) 0.50 Kg.
AMMONIA 1.00 Kg.
COLOR AND PERFUME A/G
8. – POWDER METAL CLEANER.

We found an affordable and very high-quality metal cleaner that

it only needs to be mixed with water until it forms a paste, apply with a
rag and clean. This product has the advantage of cleaning and polishing at the same time.
time, without scratching or attacking the metal.

FOR 10 Kg. OF METAL CLEANER IN POWDER

Sodium tripolyphosphate 1.50 Kg.

SODIC STONE IN POWDER 5,50 Kg.
NEUTRAL LAURYL ACID 0.50 Kg.
POWDERED PUMICE STONE 2.50 Kg.

9. - OIL FOR INTERNAL CLEANING OF GASOLINE ENGINES

Gasoline engines tend to wear out with use and despite changing them
regularly the oil, forms residues that stick to the engine block, due to
It is therefore advisable to carry out internal cleaning of it regularly.
With this formula, an oil is obtained that is packaged in plastic gallons and
when an oil change is performed, the used oil is removed, this is thrown away
gallon of cleaning oil and the engine is started, for approximately
20 to 25 minutes, then this one is removed and the new oil is added.

FOR 100 Kg. OF OIL TO CLEAN ENGINES

MINERAL OIL 89,00 Kg.

CASTOR OIL 1,00 Kg.
Deodorized kerosene 10,00 Kg.
FATTY DYE A/G

10. – QUICK GLUE FOR RUBBER, GLASS, METAL AND

WOOD.

FOR 100 Kg. OF QUICK ADHESIVE

AMMONIA 90,00 Kg.

ARABIC GUM POWDER 10.00 Kg.

Note: If the Gum Arabic is not of excellent quality, it will be difficult to dissolve.
in the Ammonia, so you should heat it beforehand in a water bath.
11. - PASTE TO AVOID PUNCTURES.

With this procedure, a product is obtained that, when in rubber, prevents

the loss of air from it, when a puncture occurs. Traditionally this
product is packaged in spray cans, but it can also be applied by removing
the little worm of the valve, introducing the product and refilling it again
air rubber, which considerably reduces the cost of the product.

FOR 100 Kg. OF PASTA 'AVOID PUNCTURES'

STEP # 1

GLYCERIN 30.00 Kg.

Sodium silicate 10.00 Kg.
GLACIAL ACETIC ACID 10.00 Kg.

STEP # 2

PASTE RESULTING FROM STEP # 1 50.00 Kg.

GLYCERIN 50.00 Kg.

Note: About 200 grams are placed in each tire, so 1 kg.

Protect the four tires, plus the spare, preventing it from going flat.
in the suitcase due to lack of use.

12. – CLEANING FOR GLASSES.

An excellent paste for cleaning glass is achieved, which leaves them shiny.
transparent and spotless for a long time, the same should be applied,
let it dry and then remove it with a dry cloth.

FOR 100 Kg. OF POLISHING FOR CRYSTALS

WATER 40.00 Kg.

Sodium carbonate 6,00 Kg.
PLASTER IN POWDER 24,00 Kg.
AMMONIA 6.00 Kg.
ISOPROPYL ALCOHOL 24,00 Kg.

13. - LUBRICANT FOR CHAINS AND LOCKS.

This lubricant is ideal for freeing chains and locks, providing you with
at the same time, a protection against moisture and oxidation, allowing for use
easy, without noise or disturbances.

FOR 100 Kg. OF LUBRICANTS FOR CHAINS AND LOCKS

GRAPHITE IN POWDER 40,00 Kg.

PARAFFIN MINERAL OIL 60,00 Kg.

14 - LIQUID METAL CLEANER.

This formula allows for the production of a liquid of excellent quality with which to
it manages to polish chrome, nickel, bronze, silver, gold, etc., and all
class of metals for which cleanliness and shine are desired. This product
dissolves the rust formed on the metal surface of objects, while
lightly polish them.

FOR 100 Kg. OF METAL CLEANER

FATTY ACID 2.00 Kg.

FORMALDEHYDE 1.50 kg.
PARAFFIN OIL 1,00 Kg.
DEODORIZED KEROSENE 27,00 Kg.
ETOXIFENOL 10 (MR) 1.00 Kg.
AMMONIA 1,50 Kg.
PINE OIL (YARMOL) 0.70 kg.
POWDERED PUMICE STONE 20,00 Kg.
WATER 45,30 Kg.

PROCEDURE: In a suitable container, the fatty acid is added and the

formaldehyde, raising the temperature to about 65 ºC, then add the
paraffin oil by vigorously stirring with a wooden paddle for a few
five minutes, in a separate container heat the deodorized kerosene until
about 70 ºC and the previous mixture is added while stirring for ten minutes
approximately. Similarly, it will heat the water with the ethoxypenol to about
80 ºC, pouring this over the previous preparation, stirring the entire mixture for
fifteen minute space, then add the formaldehyde and the pumice stone in
dust slowly, stirring for about twenty minutes, until it acquires a
fine, viscous and completely free of lumps, add the pine oil
and continue stirring for about ten more minutes, remove from the heat and let cool.
15 - AIR CONDITIONER CLEANER.

An excellent aluminum cleaner and polish liquid is achieved, it is a

effective product for cleaning air conditioners, to be applied
with a sprayer or gun, this product removes dirt in no time
minutes after being applied, it has the advantage of not attacking the parts of
aluminum, nor that of other metals, leaving the panels shiny. This product
it should be handled with gloves.

FOR 100 Kg. OF AIR CONDITIONER CLEANER

WATER 73,25 Kg.

Phosphoric acid 20,00 Kg.
ETOXIFENOL 10 0.75 Kg.
AMMONIA 6.00 Kg.

16. - RADIATOR CLEANER.

This formula results in a very effective liquid for removing the

rust and dirt deposits that accumulate in the radiator of
automobile and are one of the causes of overheating in them.
This liquid must be added to the radiator water and wait an hour with it.
motor running, while it performs its cleaning effect, after that time
the drain valve is opened and washed with abundant water.

FOR 100 Kg. OF RADIATOR CLEANER

WATER 82,50 Kg.

DIETHYLENE GLYCOL 5,00 Kg.
ETOXIFENOL 10 0.50 Kg.
Phosphoric acid 12,00 Kg.

17. - CAR SHAMPOO.

This formula results in an excellent quality cleaning product, not

improved in the market, with great foaming power, which facilitates emulsification
of fatty products, significantly increasing its cleaning power, this
the product easily removes without leaving stains on the car's paint, thus
it leaves a shiny layer that enhances the color of the paint.

FOR 100 Kg. OF CAR SHAMPOO

WATER 84,80 Kg.

CAUSTIC SODA 2.50 kg.
TRISODIUM PHOSPHATE 2.00 Kg.
LAURYL ACID 8,00 Kg.
 ETOXIFENOL 10 1.00 Kg.
Sodium sulfate 0.40 Kg.
COCONUT AMINA 1.00 Kg.
FRAGRANCE AND DYE A/G

18. - CARBURETOR CLEANER.

This is a product that removes both gasoline stains and the

carbon deposited in the carburetors. This liquid must be kept well
covered, to prevent the aromatic components of the mixture from becoming airborne.
When it needs to be used for every four parts of the product, add one.
water part, the top part of water, prevents the evaporation of the product.

FOR 100 Kg. OF CARBURETOR CLEANER

DIETHYLENE GLYCOL 12.00 kg.

ETOXIFENOL 10 2.00 Kg.
ETOXIFENOL 4 4.00 Kg.
Methyl Chloroether 48.00 Kg.
Fatty Acid 4,50 Kg.
PRIMARY AMINA 5,50 Kg

19. - DEGREASER FOR MECHANICS.

DESCRIPCIÓN DEL PRODUCTO:

HIGHLY ACTIVE FORMULATION BASED ON ANTI-FAT INGREDIENTS

ALCALINIZERS, SIMILAR TO CESCO, DRY-CLEAN, SUAIP, SERVES FOR
CLEANING OF HANDS, FLOORS, TILES, BATHROOMS, MECHANICS' CLOTHING,
ETC.
FORMULATION:
FORMULATION %
NONYL PHENOL 10 MOLES 15.0
BUTILCELLUSOLVE 5.0
50% SODIUM HYDROXIDE 5.0
4. WATER C.B.P 100% 75.0
WATER C.B.P. 100% Distilled Water or Biologically Pure
METHOD OF PREPARATION:
 A) MAKE A MIXTURE OF THE NONYL WITH THE
BUTILCELLUSOLVE and already integrated dissolve in
THE REMAINING WATER WITH VIGOROUS AGITATION UNTIL
OBTAIN A HOMOGENEOUS MIXTURE.
B) ADD SODIUM HYDROXIDE AND STIR UNTIL
DISSOLUTION OF THE PRODUCT.
C) TO PACKAGE.

20. - UNIVERSAL DEGREASER:

PRODUCT DESCRIPTION:
HIGH CONCENTRATION LIQUID DETERGENT, THAT CLEANS AND
DEGREASING EXTRACTION BELLS, GOLD, SILVER, STONES
PRECIOUS, RUGS ETC.
DILUTION FOR USE:
ONE PART OF THIS PRODUCT WITH 10-20-30 EQUAL PARTS OF WATER,
DEPENDING ON THE AMOUNT OF DIRT OR GREASE TO BE REMOVED.

FORMULATION:
FORMULATION %
Sodium Lauryl Ether Sulfate 7.0
7.0 ALKILBENZENESULFONATE
SODIUM
BUTYLCELLUSOLVE 5.0
Sodium Tripolyphosphate 3.0
5. NONYL PHENOL 10 MOLES 3.0
FORMALDEHYDE 0.25
7 WATER C.B.P 100 % 74.75
WATER C.B.P. 100% Distilled water or Biologically Pure
METHOD OF PREPARATION:
A) HEAT HALF OF THE TOTAL WATER OF THE
FORMULATION WHERE WE WILL DISSOLVE PERFECTLY
Sodium alkylbenzenesulfonate.
B) IN ANOTHER CONTAINER HEAT THE OTHER HALF OF
WATER AT 70°C AT BOILING POINT, ADDING THE
SODIUM TRIPOLYPHOSPHATE, WHICH WE WILL DILUTE
COMPLETELY WITH VIGOROUS AGITATION.
 C) WE PROCEED TO MIX BOTH PHASES A) IN B) AND
PERFECTLY BLENDING WHEN ADDING THE REST OF
THE INGREDIENTS IN THE ORDER OF THE FORMULATION
WITH AGITATED VIGOR.
D) LET REST AND PACKAGE.

OPTIONAL; THE Nacreous AT 1%

21. – GEL DEGREASER:

PRODUCT DESCRIPTION:
RISK-FREE GEL GREASE REMOVER, PRODUCT
LESS AGGRESSIVE BUT STILL EFFECTIVE, HIGH-QUALITY PRODUCT
CATEGORY BY ITS DEGREASERS AND SOLVENTS COMPONENTS
FROM THE COCKROACH AND FATS, IF WE WANT A MORE PRODUCT
AGGRESSIVE AND QUALITY, REPLACE THE MONOETHANOLAMINE OF THIS
Formulation with sodium hydroxide at 10-20%.

FORMULATION:
FORMULATION %
CARBOXYMETHYLCELLULOSE 2.5
BUTYL CELLUSOLVE 1.0
3. Monoethanolamine* 10.0
4. NONYL PHENOL 10 MOLES 0.3
FORMALDEHYDE 0.25
6. WATER C.B.P 100% 85.95
WATER C.B.P. 100% Distilled Water or Biologically Pure

PREFERABLY DISSOLVE IN HOT WATER.

METHOD OF PREPARATION:
A) Dissolve the ingredient in a quantity of water
AT LEAST 12 HOURS BEFORE BEING USED.
 B) DISSOLVE IN THE REMAINING WATER OF THE FORMULATION
ONE BY ONE THE OTHER INGREDIENTS OF THE
FORMULATION WITH VIGOROUS AGITATION.
C) DISSOLVED THE INGREDIENTS PREVIOUS
PERFECTLY, ADD THEM TO THE MIX OF
ITEM A) UNTIL ACHIEVING THE DESIRED CONSISTENCY.
D) TO PACKAGE.

22. – ANTI-FOG WINDOW CLEANER

PRODUCT DESCRIPTION:
HIGHLY EFFICIENT PRODUCT FOR CLEANING GLASS AND
GLASSES OF ALL KINDS WITH ANTI-FOG ACTION AND
DEGREASER, IDEAL FOR TAXIS.

FORMULATION:
FORMULATION %
Sodium Lauryl Sulfate 1.5
2. AMMONIUM HYDROXIDE 1.0
3. FORMALDEHYDE 0.25
4. ISOPROPYL ALCOHOL 3.0
BLUE DYE C.S.S
6. WATER C.B.P 100% 94.25
WATER C.B.P. 100% Distilled Water or Biologically Pure
*COLOR (C.S.S) (Vegetable anilines, must be water-soluble and be
approved by the Secretary of Health, for use in cosmetics and cleaners.

METHOD OF PREPARATION:
A) IN THE WATER NECESSARY FOR THIS FORMULATION,
ADD THE INGREDIENTS ONE BY ONE IN THE ORDER
THAT IS INDICATED AND MIX UNTIL OBTAINING A
HOMOGENEOUS MIXTURE.
B) SHAKE AND HOMOGENIZE THE MIXTURE AND IF DESIRED,
ADD COLOR TO TASTE, GENERALLY 1 OR 2
DROPS PER LITER OF BLUE COLOR.
 C) TO PACKAGE.

23. - "CARPET LIQUID CLEANER"

PRODUCT DESCRIPTION:
HIGHLY EFFICIENT CARPET CLEANING LIQUID PRODUCT
DEGREASER AND DISMANTLER DISSOLVED IN A LITTLE WATER AND
CARVING WITH A BRUSH ON CARPETS AND RUGS, USE
NO DILUTING IN DIFFICULT CASES.

FORMULATION:
FORMULA %
ALKYLBENZENSULFONATE THE 7
Sodium
B) LAURYL ETHER SULFATE 7
Sodium
C) COCODIETANOLAMINE 2
BUTILCELLUSOLVE 4
E) NONYL PHENOL ETHOXYLATED 10M 2
F) FORMALDEHYDE 0.25
G) WATER 77.25

METHOD OF PREPARATION:
A) IN A CONTAINER PLACE HALF OF THE TOTAL WATER AND
DISSOLVE INGREDIENT A (65-70°C), WITH AGITATION
VIGOROUS.
B) CONTINUE ADDING THE REMAINING INGREDIENTS IN THE
ORDER NOTED, AND SHAKE UNTIL THE MIXTURE IS UNIFORM.
LET REST.
C) TO PACKAGE.

NOTE: THE FORMULA IS ADDED WHEN IT IS COLD.

24. – UNIVERSAL BRIGHTENER

PRODUCT DESCRIPTION:
PRODUCT SIMILAR TO ARMOR-ALL, CONSIDERED WITHIN THE
CATEGORÍA DE COSMÉTICOS PARA AUTOS, QUE APLICADO A LLANTAS Y
PLASTIC DEFENSES, GIVES THEM, SHININESS AND COLOR, DUE TO
THE ACTION OF OILS AND MOISTURIZERS.

FORMULATION:
FORMULATION %
SILICONE OIL 5.0
2. EMULSION 36 20.0
3. NONYL PHENOL 10 MOLES 1.0
4. GLYCERIN 5.0
FORMALDEHYDE 0.1
6 WATER C.B.P 100% 64.0
WATER C.B.P. 100% Distilled water or Biologically Pure
METHOD OF PREPARATION:
A) IN A CONTAINER MIX THE NONYL PERFECTLY
PHENOL AND SILICONE OIL.
B) ADD THE SILICONE EMULSION AND EMPTY THE
CONTAINER THAT HOLDS THE TOTAL WATER, SHAKE
VIGOROUSLY UNTIL THE MIXTURE IS UNIFORM.
C) ADD THE INGREDIENTS REMAINING, CON
VIGOROUS AGITATION AND LET REST.
D) PACKAGE.

NOTE:
SHAKE BEFORE USE
IF YOU WANT TO DISSOLVE THICK VISCOSITY IN WATER
HOT 2-4% POLYETHYLENE GLYCOL DISTEARATE
(PEG-150) AND ADD IT TO THE FINAL PRODUCT.
25. - CAR WASH SHAMPOO

PRODUCT DESCRIPTION.
PRODUCT FOR WASHING BODYWORK AND ALL SURFACES
PAINTING THAT REQUIRES CAREFUL WASHING, ACTION
DUSTING AGENT THAT LEAVES A TOTAL CLEAN.

FORMULATION:
FORMULATION %
SODIUM LAURYL ETHER SULFATE 10.0
14.0 ALKYL BENZENE SULFONATE
SODIUM
3. NONYLPHENOL 10 MOLES 2.0
4. DIETHANOLAMIDE 2.0
FORMAL. 0.1
6. SOLUTION Saturated DE 3.0
SODIUM CHLORIDE
7 COLOR C.S.S
8 WATER C.B.O 100% 68.90
*WATER C.B.P. 100% Distilled water or Biologically Pure
COLOR (C.S.S) (Vegetable anilines, must be water-soluble and be
approved by the Secretary of Health, for use in cosmetics and cleaning products.

METHOD OF PREPARATION:
A) IN A SUITABLE CONTAINER PLACE HALF OF
WATER AND INGREDIENT # 2 AND HEAT TO 70°C,
SHAKING UNTIL DISSOLVED.
B) NEXT, ADD THE REST OF THE
INGREDIENTS WITH VIGOROUS SHAKING.
C) ADD THE REST OF THE WATER, STIRRING AGAIN
AND LET IT REST.
D) WHEN THE TEMPERATURE IS THAT OF THE MEDIUM
ENVIRONMENT, ADD THE SATURATED SOLUTION OF
SODIUM CHLORIDE TO PROVIDE DESIRED VISCOSITY.
E) TO PACKAGE.

NOTE:
 IF COLOR AND AROMA ARE ADDED, IT WILL BE BEFORE ADDING
Sodium chloride.

26. - FORMULAS TO MAKE THINNER OR

SLIMMER:

FORMULA 1.- CETONA 20%, TOLULOL 20%, XILOL 20%, NAFTA 40%.
FORMULA 2.- CETONA 30%, ALCOHOL 10%, TOLULOL 20%, NAFTA 40%
FORMULA 3.- HEXANO 10%, METWIOL 10%, MIBK 3%, TOLULOL 37%,
NAFTA 40%.
FORMULA 4.- CETONA 10%, ALCOHOL 20%, TOLULOL 30%, XILOL 17%,
MIBK 3%, NAFTA 20%.

27. - REFINING OF AUTOMOTIVE OIL:

NOW MORE THAN EVER A QUITE PROFITABLE BUSINESS IS THE

REFINING OF AUTOMOTIVE OIL GIVEN THE HIGH COST THAT
HAS CURRENTLY.
AS WE ALL KNOW, THE OIL THAT HAS BEEN USED NEVER IS
BECOMES USELESS. THE ONLY THING THAT HAPPENS TO THE OIL THAT HAS
USED SIDO, IS THAT THIS FILLED WITH CARBON PARTICLES,
WHEN THEY ARE REMOVED BY ONE OF THE PROCEDURES
THAT EXIST, LEAVES IN BETTER CONDITIONS THAN WHEN IT
USED FOR THE FIRST TIME, AS THOUSANDS OF TESTS OF
LABORATORY THAT HAVE BEEN DONE, SHOW US THAT THE
OIL THAT WE COMMONLY CALL BURNED, AFTER BEING
PROCESSED FOR ITS REFINEMENT, IT REMAINS OF SUPERIOR QUALITY
BEFORE BEING USED, DUE TO THE OIL BEING
USED IN THE ENGINE, IT EXPERIENCED HIGH TEMPERATURES AND
PRESSURES GIVING RISE TO THE MOST UNSTABLE PARTS OF
OILS DECOMPOSE AND ONLY THE MOST PARTS REMAIN
STABLE, IT HAS BEEN PROVEN THAT THEREFORE THE OIL A
WELL PROCESSED IN ITS REFINING, ITS QUALITY INCREASES.

IN ADDITION, WE MUST CLARIFY THAT THE OIL CAN BE USED AND

REFINE AS MANY TIMES AS NECESSARY WITHOUT LOSING ITS
QUALITY AND THAT CAN BE SOLD AT A QUITE LOW PRICE AND
AT THE SAME TIME, RECEIVE VERY GOOD PROFITS AS THE
BURNED OR USED OIL IS OBTAINED AT A VERY LOW PRICE AND
SOMETIMES GIVEN AWAY IN THE BRANCH NEGOTIATIONS. THERE IS
VARIOUS WAYS TO PROCESS THE OIL, WE ARE GOING TO
GIVE A VERY SIMPLE ONE:

FOR FILTERING.
YOU CAN DO IT USING CYLINDRICAL CONTAINERS AND
WITH A FUNNEL END, PLACING A ON THE TIP
SMALL SHUT-OFF VALVE TO REGULATE DRIPPING.
PLACE THE MATERIAL INSIDE THE FUNNEL PART
FILTERING, FOR EXAMPLE: SILICA SAND SO THAT IT STAYS THERE
THE IMPURITIES CONTAINED IN THE OIL AND ONLY COME OUT IN
SLOWLY FORM THE RE-REFINED OIL, WHICH YOU WILL BE ABLE TO
CHECKING OUT OF A PERFECT TRANSPARENCY, IT IS
IT IS CONVENIENT THAT BEFORE DEPOSITING THE OIL IN THIS FILTER,
I have it in 200-liter tanks at rest for at least.
1 or 2 days with the aim of allowing the impurities to settle.
AND THAT WHEN PROCESSED, THE OIL BECOMES LESS DIRTY, WHEN
DRAIN THE OIL FROM THE DRUM, (OF 200 LITERS) TO TRANSFER IT TO THE
FILTER, DO IT SLOWLY AND ONLY TAKE WITH A
RECIPIENT THE TOP UNTIL REACHING THE PART
GREASY THAT IS AT THE BOTTOM, WHICH SHOULD BE USED AS
FUEL, THIS ENERGY FUEL HAS A LOT
DEMAND FOR THE FURNACES FOR EXAMPLE: FROM THE BRICKMAKERS
THAT THEY PAY VERY WELL, THERE YOU CAN RECOVER WHAT
EXPENSE WHEN BUYING BURNED OIL.
28. - SPECIAL DEGREASING CLEANSER CREAM
PARA MECANICOS
(CLEAN YOUR HANDS WITHOUT USING WATER)
5,168 GRS. OF EXTRA QUALITY SODIUM ALGINATE.
1,333 GRS. OF TERGITOL N.P.X. (SOLD BY UNION CARBIDE)
8 1/3 LITERS OF ISO-PROPANOL (ISOPROPYL ALCOHOL)
25 CC OF AMYL ACETATE, AS ESSENCE.
33.6 LITERS OF DRINKING WATER.

NOTE: IN PLACE OF SODIUM ALGINATE, YOU CAN ALSO

USE A MIXTURE OF 2500 GRS. OF ALGINATE POWDER
2,668 GRS OF COMMERCIAL SODIUM BICARBONATE.

PROCESS:
ALL THE WATER IS POURED INTO A RIGID MATERIAL CONTAINER OF
50 LITERS OF CAPACITY, A HEATER IS INTRODUCED INTO IT
ELECTRIC IMMERSION AND PROCEED TO HEAT THE WATER BETWEEN
60° C and 70° C. MAINTAINING THAT TEMPERATURE FOR 28 MINUTES.
AT THIS TEMPERATURE, THE HEATER IS REMOVED AND 1.333 IS POURED.
GRS. OF TERGITOL N.P.X, IS REMOVED WITH A WOODEN SHOVEL
UNTIL A HOMOGENEOUS MIXTURE IS OBTAINED, ADD
SODIUM ALGINATE GRADUALLY OR THE MIXTURE
PREVIOUSLY PREPARED SUBSTITUTE. REMAINS BY REMOVING
NOW FASTER FOR 3 MINUTES, A WILL FORM A
MIXTURE IN THE FORM OF THICK AND VISCOUS PASTE. NOW IT IS THE

TIME TO EMPTY ALL THIS COMPOUND INTO A BLENDER AT

MARCH AND BEAT FOR 5 MINUTES. SINCE THE ACETATE
ARNILO IS VERY SOLUBLE IN ISOPROPYL ALCOHOL AND NOT IN
THE WATER IS CONVENIENT TO DISSOLVE IT FIRST IN ALCOHOL AND
THEN IN A MIXTURE OF WATER, TERGITOL, AND SODIUM ALGINATE THAT
IT CONTAINS THE DEPOSIT.
IN A GLASS JAR WITH A CAPACITY OF 16 LITERS, IT
Pour the 8 1/3 of isopropyl alcohol and then
ALSO 25 CC OF ARNIL ACETATE, AGITATING FOR 5
MINUTES. THE CONTENT OF THE JAR WILL BE ADDED LITTLE BY LITTLE AND
WITHOUT STOPPING TO BEAT ON THE DOUGH CONTAINED IN THE BOWL,
THE TEMPERATURE MUST BE BETWEEN 30 AND 35° C.
THE ENTIRE SOLVENT IS GRADUALLY INCORPORATED,
IN UNION WITH ARNIL ACETATE. THE MASS AS A WHOLE
WILL HAVE TO THICKEN AND INCREASE ITS VOLUME, THEREFORE IT
WILL PROCEED TO A BLEND LESS THAN 5 MINUTES. THE CONTENT OF
THE MIXER WILL EMPTY RAPIDLY INTO THE DEPOSIT OF 80
LITERS AND IT IS COVERED.

IT IS SUGGESTED TO PACKAGE THE PRODUCT IN PLASTIC CONTAINERS.

29. - UPHOLSTERY CLEANING SHAMPOO:

THIS IS A LIQUID DETERGENT NAMED ALIPAL CO. 436 FOR

USE 3 TEASPOONS OF THE LIQUID AND DISSOLVE THEM
IN A BUCKET OF WATER, IT IS SHAKEN UNTIL A GOOD ONE IS OBTAINED

FOAM AND WITH THIS FOAM THE UPHOLSTERY, CARPET IS BRUSHED,

FURNITURE, PULLMAN, ETC. THAT YOU WANT TO CLEAN.

FIRST USE A BRUSH AND THEN CLEAN WITH A CLEAN CLOTH:

LIMPIE PRIMERO UNA PARTE CHICA Y ENSEGUIDA OTRA. EL ALIPAL
CO. 436 IS SELLING 'ANTARA' LAKE ALBERTO #442, MEXICO CITY.

30. - LIQUID BATTERY RENOVATOR:

PHOSPHORIC ACID SYRUP 200 CC
DISTILLED WATER, 2 LITERS.

PREPARATION: MIX THE PHOSPHORIC ACID WITH WATER AND

BOTTLED IN SMALL BOTTLES CONTAINING 30 C.C. THEY ARE SOLD IN
Boxes containing five small containers, one for each cell.

31. - POWDERED BATTERY REJUVENATOR:

MAGNESIUM SULFATE, 1 KILO

ALUMINUM 1 KILO

PREPARATION: MIX THE POWDERS TOGETHER AND PACKAGE THEM IN

CELLOPHANE PAPER ENVELOPES CONTAINING 30 GRAMS EACH.
THE INSTRUCTIONS THAT MUST BE PRINTED ON EACH ENVELOPE ARE:
EMPTY THE CONTENTS OF THIS BAG PROPORTIONALLY IN
EACH CELL.
THIS FORMULA IS VERY SIMILAR TO THE ONE USED BY THE FAMOUS
AMERICAN PRODUCT AD-X2 WHICH WAS THE ONE THAT STARTED THE SALE OF

ACCUMULATOR RENEWERS IN UNITED STATES: A

SIMILAR PRODUCTS TO THE PREVIOUS ONES ARE MADE IN STATES
UNITED AND EUROPE A TREMENDOUS PROPAGANDA. SAYING THAT
PROLONG THE LIFE OF THE BATTERY, WHICH PROVIDE MORE POWER,
WHAT LOAD FASTER, ETC. THE TRUTH IS, ACCORDING TO
RESEARCH CONDUCTED BY THE NATIONAL BUREAU OF STANDARDS OF
UNITED STATES, THAT THIS TYPE OF PRODUCTS AVOID THE
SULFATION OF THE BATTERY AND HOW THIS IS THE MAIN
ENEMY OF THE ACCUMULATOR, IT CAN BE SAID THAT THESE
CAR RENOVATORS ARE CALLED TO BE ONE
NECESSITY IN OUR ENVIRONMENT BECAUSE THEY ALLOW INCREASE
LIFETIME OF A BATTERY. NOW IS A VERY GOOD TIME
TO EXPLOIT THIS PRODUCT, DUE TO THE HIGH COST THAT THEY HAVE
REACHED THE ACCUMULATORS. FOR THEM TO BE SUCCESSFUL THEY
REQUIRES THAT THE BATTERY OR ACCUMULATOR BE MECHANICALLY
CORRECT. BOTH FORMULAS ARE VERY GOOD, YOU CAN USE THE
WHAT IS MOST BENEFICIAL TO YOUR INTERESTS.

32. - CLEAN RADIATORS:

THIS CAR, TRUCK, ETC. RADIATOR CLEANER IS

CAN BE MADE FROM A SINGLE INGREDIENT WHICH IS BISULFITE OF
SODIUM. BUY IT IN BULK AND PACKAGE IT IN BOXES OF
CARD CONTAINING 100 GRAMS AND WITH THE FOLLOWING
INSTRUCTIONS:
CLEAN THE RADIATOR WITHOUT DAMAGING THE RUBBER OR METAL PARTS.
FILL THE RADIATOR WITH WATER AND ADD THE CONTENT OF THIS
PACKAGE, USE THE CAR FOR A COUPLE OF HOURS AND THEN DUMP THE WATER,

RINSE THE RADIATOR TWICE AND PUT IN CLEAN WATER, THIS WILL
RADIATOR FLUSH.

33. - PISTON SEALER:

THIS PRODUCT IS USED TO INCREASE THE COMPRESSION OF THE

AUTOMOTIVE ENGINES, THE FIRST PRODUCT THAT WAS SOLD OF
THIS CLASS WAS A TREMENDOUS SUCCESS "PISTOL SEAL" IS THE
BRAND.
IT IS WELL KNOWN THAT THE USE OF INTERNAL COMBUSTION ENGINES
IT PRODUCES A RAPID DETERIORATION OF BOTH THE PISTONS AND
THE ENGINE RINGS ALLOWING OIL PASSAGE
LUBRICANT AND ALSO THE COMBUSTION GASES ESCAPE
INCREASING GASOLINE CONSUMPTION.
WHEN AN ENGINE REACHES THIS CONDITION, THE ONLY REMEDY
WHAT WAS KNOWN WAS TO REMOVE THE ENGINE AND DO A
COSTLY REPAIR, CHANGING RINGS OR FLAT
CHANGING THE ENGINE AGAIN.
IT HAS BEEN DISCOVERED THAT BY MAKING A PASTE WITH A MINERAL
CALL VERMICULITE AND LUBRICATING OIL AND ALLOWING TO
THIS PASTE REACHES THE CYLINDERS OF AN ENGINE. THIS PASTE
IT SERVES AS A SEALANT BETWEEN THE RINGS AND THE CYLINDER, AVOIDING
THE PASSAGE OF LUBRICATING OIL AND GASES. VERMICULITE HAS
THE PARTICULARITY OF ACTING AS A LUBRICANT AND ALSO WITH IT
ENGINE HEAT INCREASES IN VOLUME, BUT AT THE SAME TIME
Preserving FLEXIBLE FOR ALLOW THE FREE
ENGINE OPERATION.

FORMULA:
VERMICULITE 360 GRAMS.
140 GRAMS OF LUBRICATING OIL.

PROCESS: ADD THE LUBRICATING OIL TO THE VERMICULITE UNTIL

FORM A PASTE OF GELATIN OR VASELINE CONSISTENCY
SOLID. WITH THIS CONSISTENCY, IT IS READY TO BE PACKAGED,
THIS MUST BE DONE IN TIN TUBES, LIKE THOSE USED BY
THE TOOTHPASTES, CONTAINING 150 GRAMS PER TUBE, THIS IS
SUFFICIENT TO ASSEMBLE A 6 OR 8 CYLINDER ENGINE.
THIS IS THE MOST CONVENIENT FOR PACKAGING, BUT IF YOU
IF DESIRED, YOU CAN USE A CAN.

ETIQUETA:
GIVE YOUR PRODUCT A SUITABLE NAME FOR EXAMPLE: PISTON
PACK, VITA MOTOR, ETC. AND THEN THE OBJECT OF THE PRODUCT OR RATHER,
PISTON SEALANT.
THIS PRODUCT PUTS A RESILIENT MINERAL SEAL OVER THE
PARTS USED OF THE ENGINE. INCREASES COMPRESSION AND THE
ENGINE EFFICIENCY.

INSTRUCTIONS FOR USE:

RUN THE ENGINE FOR A FEW MINUTES TO ACHIEVE THAT IT IS

HOT, TURN OFF THE ENGINE, REMOVE THE SPARK PLUGS AND PUT IN 20 TO 30
GRAMS OF 'PISTON PACK' IN EACH CYLINDER. PUT BACK
THE SPARK PLUGS. I STARTED THE ENGINE AND LEFT IT RUNNING WITHOUT
DRIVE THE CAR FOR 5 MINUTES AND THEN WORK ON THE ENGINE
SO THAT IT OVERHEATS. BECAUSE THE PRODUCT ACHIEVES
SOONER ITS EFFECT BY WARMING UP THE ENGINE. THIS
WARM-UP SHOULD LAST ABOUT 30 MINUTES. TURN OFF THE ENGINE,
KEEP DRIVING THE CAR IN THE NORMAL WAY AND YOU WILL NOTICE
IMMEDIATELY THE BEST PERFORMANCE OF THE ENGINE AND A
REDUCED OIL CONSUMPTION. IF THE ENGINE BECOMES DIFFICULT TO
START WALKING OR WITH FAULTS, REMOVE THE SPARK PLUGS AND CLEAN THEM,

WELL SOMETIMES THE PISTON PACK ENDS UP GETTING DIRTY

SPARK PLUGS: THIS ONLY HAPPENS THE FIRST TIME IT IS APPLIED AND

AFTER, NEVER AGAIN.

NOTE: DO NOT PLACE PISTON PACK ON THE VALVES, BECAUSE

NO EFFECT. THIS PRODUCT IS A NOVELTY IN
OUR MEANS AND CAN BE SOLD THROUGH AGENTS OR
GO DIRECTLY TO GAS STATIONS, AUTO PARTS STORES, ETC.

THE MARKET IS VERY BROAD AND THE PRICE THAT CAN BE CHARGED IS
HIGH, CONSIDERING THE COSTLY REPAIR THAT
AVOID. TO MAKE A SUPERIOR PRODUCT, USE 90 GRAMS OF
EXFOLIATED VERMICULITE AND 270 GRAMS OF VERMICULITE WITHOUT
EXFOLIATE 30 MESHES, THIS IS HOW THEY ARE REQUESTED WHEN BUYING THEM.
 UNEXFOLIATED VERMICULITE HAS THE PARTICULARITY OF
INCREASE IN VOLUME WITH HEAT, FORMING A SEAL
BETTER IN THE ENGINE.

34. - CAR WAX:

Yield: 200 g
Preparation time: 1 hour
Expiration: 3 months
Ahorro: 50%

Ingredients:
3 1/2 tablespoons of carnauba wax* (20 g)
• 1 cup of turpentine
1/3 cup of yellow wax* (40 g)
1 teaspoon of mineral oil

They are purchased in large pharmacies.

It is purchased at hardware stores.

Utensilios:
Small glass bowl
Tongue depressor
Plastic jar (for packaging)

Procedure:

1.- Put water on the fire in the pot. When it comes to a boil, place inside the
bowl with yellow wax and carnauba wax to melt in a double boiler.
2.- Once both waxes have melted, remove the saucepan from the heat and place it on
a ventilated place, away from the stove.
3.- Gradually add the turpentine to the waxes, stirring gently with the
tongue depressor until the ingredients are combined. Let the mixture cool until
begin to solidify.
4.- Shake the mixture again to homogenize it and add the mineral oil,
whipping until achieving a creamy consistency. Pour the mixture into the jar and cover it.

Mode of use:
Your car must be clean and dry before applying the wax.
With a clean cloth, apply the wax in sections.
Wait for it to dry.
I vigorously rubbed the surface of the car with another clean and dry cloth until
remove grease stains. For best results, wax your car.
shadow.

Recommendations:
It is important to wax your car to protect the paint from the environment. If
You notice that the paint is dull and stained, it's time to wax it.
Do not start the car too frequently because in the long run it can be
counterproductive, as the paint may deteriorate.

Interesting facts
The turpentine content of the wax helps to remove paint stains.
They, on the other hand, protect it.

Mineral oil serves to soften the waxes.

Carnauba wax is a plant-based wax that is also used in the
food industry as an additive to give shine to food and improve its
appearance.
Some fruits, such as the apple, naturally contain a kind of wax that
acts as protection.

Conservation
Store the wax in a well-ventilated area and out of reach of children. It is very
It is important that the jar is tightly closed to prevent the turpentine from evaporating.

35. - VINYL POLISH:

Yield: 250 ml
Preparation time: five minutes
Expiration: six months
Savings: Approximately 55% compared to the commercial product.

Ingredients:

1/4 cup of water

1/4 teaspoon of sodium lauryl sulfate
2 tablespoons of glycerin
2 tablespoons of mineral oil

Utensils:
Whisk
Plastic bottle
Funnel

Procedure:
1. Pour the water into a bowl. Add glycerin and sodium lauryl sulfate. Shake.
gently to dissolve them.
2. Add the mineral oil, stirring continuously, until an emulsion is obtained.
3. With the help of the funnel, pour into the plastic bottle
Conservation
Store the vinyl polish in a cool, dry, and dark place, away from
children's reach.

Recommendations:
You can substitute sodium lauryl sulfate with any dish detergent.

Instead of mineral oil, you can use cooking oil, only that it has the
inconvenience of oxidizing faster and becoming rancid.

Since it does not contain toxic substances, you can also use this product on the
leaves of the plants. Thus, in addition to cleaning them due to the effect of the detergent, the oil and

glycerin will give them shine.

Vinyl is a material with a consistency similar to leather, and it is used in the

manufacturing of furniture and textiles.

36. - SELF-SHINING GEL WAX FOR

Automobiles

Objective for one and a half liters

This is a biodegradable emulsified restorative gel wax that is self

brilliant does not need polishing, special for all kinds of automobile paints,
easy application.

In old paintings, one must pre-clean with white polishing paste first.
to apply it, on new or metallic paints it is applied with the vehicle beforehand
wiping the entire surface with a clean cloth or rag and leaving it to dry for a few
minutes to enjoy a shiny finish and on paintings in poor condition of a
new car.

9. Formula:

1 liter of water (vehicle)

3 grams Mergal (bactericide)

500 grams of silicone emulsified at 60% (active substance)

20 grams of Carbopol 940 (thickener)

8 grams Triethanolamine (emulsifier)

Preparation:
In a plastic container, water and silicone are mixed for 2 minutes, then it
we add the mergal the carbopol 940 and the triethanolamine and mix for another 2
minutes to let it rest for 2 hours to turn into gel and package it,
the consistency of the gel depends on the carbopol, it can be added more or reduced
it's a matter of testing, this is a new formula that does not exist in the market
still ahead.
Production costs are low, and demand depends on management of the
advertising and the presentation we give to the product.

37. - DEGREASER FOR METALS

An excellent non-caustic degreaser is achieved, which can be used with the
hands and a sponge, as it does not irritate the skin, leaving the product ready to be
painted or chemically treated.
FOR 100 Kg. DEGREASER
WATER 96.00 Kg.
TRISODIUM PHOSPHATE 4.00 Kg.

38. - ANOTHER DEGREASING CREAM FOR HANDS

INGREDIENTS:
1) VARSOL, DEODORIZED – 350 GRAMS.
STEARIC ACID (DOUBLE OR TRIPLE) - 75 GRAMS.
NEODOL - 43 GRAMS.
4) ANHYDROUS LANOLIN - 5 GRAMS.
TRIATONALAMINE (TEA) – 34 GRAMS.
GLYCERIN - 20 GRAMS.
Methylparaben sodium - 2 grams.
8) H2O (WATER) – 73 LITERS
9) VEGETABLE DYE AND FRAGRANCE (TO TASTE)
PREPARATION:
In a tin or aluminum container, we add the first four ingredients.
we mix well and put on low heat until the products melt: to
At the same time, in another enamel or aluminum container, we add the remainder of
the ingredients, except for the perfume and the color, and we also bring to a simmer
until it reaches a temperature of 80º (that is, it is about to boil), once
having achieved this process, we combine the two mixtures under continuous agitation, until the point

of cream finally we add the fragrance and color, test the pH, which should
to be from 9 to neutral.
NOTE:
If the pH is exceeded, lower it with muriatic acid, Detersin-CR is used in
hospitals and clinics as an excellent disinfectant, bactericide, and germicide, use it
also in the washing of clothes, dishes, floors, bathrooms, swimming pools, etc.

CAUTION:
In the manufacturing of this product, use gloves, masks, glasses, and clothing.
suitable; keep out of reach of children.
39. - ENGINE AND PARTS DEGREASER
INDUSTRIALS IN CREAM

INGREDIENTES:
1) ARKOPAL No. – 3000 GRMS.
2) DEODORIZED VARSOL – 6000 GRMS.
DETERSIN-K 1000 GRMS.
4) NEODOL – 150 GRMS.
PREPARATION:
In a plastic container, mix the arkopal with the detergent-k until achieving its
homogenization, meaning that the products can be well mixed, then we add
the deodorized varsol under continuous agitation (preferably with a mixer).
Finally, we add the neodol while continuing to stir, we package it and store it in a
cool place.
NOTE:
This product has no pH, as it is for purely industrial use.
In hot climates, the product tends to separate a little; if this happens, increase
the amount of arkopal is about 100 grams more.

MODE OF USE:
This product should be applied to the surface with a brush and left to act for
space of 10 to 20 minutes, then proceed to remove the product with
abundant water under pressure or wash it with steam.

CAUTION:
Keep out of reach of children.

5. FORMULAS FOR THE GUM

INGREDIENTS:
POLYVINYL ACETATE 290 (PVA) – 100 GRAMS.
2. DIBUTYL TALATE - 12 GRMS.
3. SODIUM CARBOXYMETHYL CELLULOSE - 1 G.
PREPARATION: In a plastic container, mix these three ingredients in order,
under continuous agitation, preferably with a mixer if it is in small amounts
quantities, for large amounts use a 2 horsepower agitator motor
fuerza; esto es con el fin de hacer una mezcla homogénea y sin residuos, envasamos
quickly in plastic containers and we package.
NOTE: This glue is slow-drying, it is used for sticking wood.
CAUTION: Keep out of reach of children.

40. - FORMULA FOR CLEAR LACQUER FOR

VEHICLES

INGREDIENTS:
1. NITROCELLULOSE RESIN - 700 GRAMS
2. ACRYLIC THINNER SOLVENT – 300 GRMS

PREPARATION:
Mix these two ingredients in order, under continuous agitation after this.
pack quickly.
NOTE:
Normally this lacquer is applied with a compressor, the solvent may vary from
according to the viscosity that the manufacturer wants to give it.

PRECAUTIONS:
When manufacturing this product, use glasses, masks, and gloves, and keep in a safe place.
fresh and dry, out of reach of children.
41. - LIQUID WAX FOR AUTOMOBILES 'NEUTRAL'

INGREDIENTS:
YELLOW BEE WAX - 1,500 GRMS
2. CARNAUBA WAX – 600 GRAMS
3. EMULSIFIED SILICONE AT 60% - 47.5 GRMS
4. Pine Turpentine – 1,650 grams
5. PINE OIL - 50 GRAMS
PREPARATION:
In an enamel or aluminum container, we melt the waxes, without allowing them to burn;
we remove from the heat and add the silicone while stirring, finally the
turpentine, mix well until achieving a homogeneous mixture, we proceed to bottle it.
and done.
NOTE:
Apply this wax to a clean and dry surface and let it sit for a few minutes.
before proceeding to shine.
PRECAUTIONS:
When manufacturing this product, use goggles, masks, and gloves. Stay away from
children's reach.

42. - PASTE WAX FOR AUTOMOBILES 'NEUTRAL'

INGREDIENTES:
MINERAL OIL - 1.816 GRAMS
2. CERA LICOWAX – 200 GRMS
3. PINE TURENTE – 200 GRAMS
4. CARNAUBA WAX – 933 GRMS
PINE OIL - 500 GRMS
BEE WAX - 133 GRMS
PREPARATION:
In an enamel or aluminum container, we add the waxes and the oils and the
we cook over low heat until melted. Once this is done, we remove from
fire and immediately we add the turpentine under strong agitation until
Start to bring to the point of creaminess, we proceed to jar it and that's it.

NOTE:
This wax is applicable to all types of vehicles, leaving a lasting shine.
waterproofing
PRECAUTIONS:
When making this product, use glasses, a mask, and gloves. Stay away from
reach of children.

43. - . FORMULA FOR ANTICORROSIVES IN OIL

INGREDIENTES:
1. ALKYD RESIN - 1,260 GRAMS
2. ZINC CHROMATE - 20 GRAMS OR TO TASTE (NORMALLY THIS
PRODUCT COMES IN COLORS SELECTED ACCORDING TO
MANUFACTURER.
3. COBALT NAPHTHENATE – 40 GRAMS.

44. - ANOTHER ANTICORROSIVE FORMULA

INGREDIENTS:
ALQUID RESIN - 1260 GRAMS
2. IRON OXIDE – 20 GRAMS OR TO TASTE (THIS PRODUCT
USUALLY COMES IN GRAY AND BLACK, IT DEPENDS ON YOUR TASTE
MANUFACTURER YOUR APPLICATION).

3. COBALT NEFENATE – 40 GRAMS

45. - DEGREASING SOAP:

INGREDIENTS:
1) Powder detergent (unbranded base) 2 kilos
500 grams of pumice powder or silica
Corn or cassava starch 100 or 500 grams
Glycerin 800 grams
Calcium carbonate 22 grams
6) Water 1 liter
7) Soap fragrance 20 grams or to taste
Colorant to fat 1 gram or to taste
PREPARATION: In an aluminum container, the glycerin, the corn starch and
we put it on low heat without stopping to stir, until a jelly forms during
15 minutes in the fire. Aside, we soak the laundry detergent powder in
the liter of water, we add the calcium carbonate, the pumice stone, the color to the
fat and 60 grams of salt and we also put this mixture on low heat and it will
by adding water proportionally it can reach up to 6 cups, until the
mix it and cook. Then remove from heat and add the first mixture but
that it is hot and we stir well until the products are well mixed and
finally the fragrance.
NOTE: This soap is a cream soap, used industrially as soap.
Degreaser. Adjust the pH with glycerin from 7 to 11 with a thermometer to
chemical products.