TOPAZ DIFFERENTIAL
PRODUCT INFO
Description
Topaz Differential valves are ideal for use in water tanks which are filled by a pressure system controlled water pump. The valve
gives a level difference which is adjustable from 50mm up to 2.5m to minimise starting and stopping of the pumping system.
Applications Principle of Operation
Maintaining Water Levels in: • The valve mounts at the top of the tank.
• Water Storage Tanks It fits easily through a thin walled tank or
• Water Cisterns screws into a threaded tank inlet.
• Irrigation Applications • As the tank empties the weighted float
travels down the cord until it hits the
Flow Graph bottom stop. The valve then opens
Gallons/Minute
immediately to give a full flow.
• The valve now runs constantly and the
weighted float rises until it hits the upper
float [Link] lifts the arm and the
valve shuts down.
Valve Inlet Pressure
• Observe the pressure that your pump
runs at while the tank is filling. Set the
pressure switch to turn the pump off
at a pressure at least one bar above the
running pressure.
Flow Litres/Minute
Key Pressure Range
15mm (½’’) 1 Bar – 10 Bar
20mm (¾”)
25mm & 32mm (1’’ & 1 ¼”) (15psi-150 psi)
Features
• High flow
• Start and stop levels Typical Installation
can be easily adjusted
to give water level
differentials from
50mm to 2.5 m.
• Keeps pump operation
to a mininum.
• DetachTM Valve Seal
Access System for
quick access to valve
seal (Patented).
• Ideal for all makes and
models of tanks.
Available Inlet Sizes
15mm (1/2”)
20mm (3/4”)
25mm (1”)
32mm (1 ¼”)
All supplied in Detach long
tail thread with back nut.
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@[Link] W: [Link]
TOPAZ DIFFERENTIAL
DIMENSIONS & MATERIALS
Topaz Dimensions Float & Weight
Dimensions
3 ½”
88mm
2 7/16”
62mm
8 15/16”
227mm
208mm
8 3/16”
A
See “Tail Dimensions”
35mm
1 ⅜”
3 17/32”
3 17/32”
90mm
90mm
Tail Dimensions
Dimension A mm inches
15mm (1/2”) Long Tail 100 3 15/16
72mm
2 3/4”
20mm (3/4”) Long Tail 46 1 13/16
25mm (1” ) Long Tail 62 2 7/16
32mm (1 1/4”) Long Tail 67 2 21/32
Part Material Part Material
Valve Body Glass Filled Nylon O’Rings Nitrile
Yellow & White Acetal Float HDPE
Internal Parts
Float Cord Polyester
Filter PP/Nylon
Actuator / Arms ABS
Diaphragm EPDM & Caps
Seal TPU
Springs, Bolts, Nuts, 304 Stainless Steel
Pin, Screws
Maximum Operating Temperature 60ºC, 140ºF
NB: High Temperature models on request.
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@[Link] W: [Link]
TOPAZ DIFFERENTIAL
PARTS IDENTIFICATION SHEET
CODE DESCRIPTION
3 1 TPPD1 Float, Arm & Weight Assembly
2 2 TPPD2 Cap & Actuator Assembly
3 TPP3 Diaphragm Assembly
4 Detach Base Assembly
4
1
CODE: TPVD
1 CODE DESCRIPTION 2 CODE DESCRIPTION
6
1 TPPD1010 Weighted Tube Stop 1 TPPD2011 Actuator Cap
2 TPPD1040 Weighted Float 2 TPP2020 6g x 10 S/S Screw
3 TPPD1030 Upper Float Stop 3 TPP2030 Frost Pro Plug
5
4 4 TPPD1020 Cord 1 4 TPP2040 Frost Pro O’ring
3
3 5 TPPD1050 Arm Extension 5 TPP2050 Valve Cap Assembly
6 TPP1040 M5 x 12 Bolt 6 TPPD2061 Damping Spring
2 4
2 7 TPP2080 Bearings (set of two)
8 TPP2090 Actuator Arm
5
9 TPP2100 6g x 25 S/S Screw
8
9
3 4 CODE DESCRIPTION
1 DTP1 Detach Base
2 BSP Tails
Short Tail Assembly (BSP)
DTP020 Detach Tail 20mm(3/4”) Short
DTP025 Detach Tail 25mm(1”) Short
DTP032 Detach Tail 32mm(1 1/4”) Short
Long Tail Assembly (BSP)
DTP015L Detach Tail 15mm (1/2”) Long
2
DTP020L Detach Tail 20mm (3/4”) Long
DTP025L Detach Tail 25mm (1” bsp) Long
1 DTP032L Detach Tail 32mm (1 1/4” bsp) Long
NPT Tails
Short Tail Assembly (NPT)
2 1 DTP0075 Detach Tail 3/4” npt
DTP0100 Detach Tail 1” npt
DTP0125 Detach Tail 1 1/4” npt
CODE DESCRIPTION
Long Tail Assembly (NPT)
1 TPP3 Diaphragm Assembly DTP0050L Detach Tail 1/2” npt Long
2 TPP3010 Pilot Flow Filter (Fine) DTP0075L Detach Tail 3/4” npt Long
TPP3011 Pilot Flow Filter (Coarse) DTP0100L Detach Tail 1” npt Long
NB: All Long Tail Assemblies are supplied with
a Seal Washer and Backnut included DTP0125L Detach Tail 1 1/4” npt Long
© Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@[Link] W: [Link]
