Certainly!
Based on the information available, here are some important questions for
CP4291 – Internet of Things (IoT), specifically tailored for the Internal Assessment Test
II (IAT-II) under Anna University's Regulation 2021 syllabus:
🧾 CP4291 – Internet of Things (IAT-II) Important Questions
📘 Part A – 2 Marks Questions
1 What are the characteristics of Io? 2 Differentiate between IoT and M2. 3 List the
purposes of IETF working group. 4 Classify the applications of integrated IoT sensor. 5
Write the purpose of different headers of 6LoWPA. 6 Give the advantages of energy
storage module. 7 What types of applications can benefit from cloud computin? 8
Illustrate the most common scenario for a private clou. 9 Define Raspberry P. 10
Outline the analog and digital I/O pins in Raspberry P.
📗 Part B – 13 Marks Questions
. Explain M2M service layer standardizatin. . Explain different types of sensors used
for IoT applicatios. . Categorize the functionalities of IoT reference architecture with a
neat diagrm. . Compare the characteristics of first-generation and advanced-generation
IT.
For more detailed information and additional resources, you may refer to the following:
CP4291 Internet of Things - Question Paper
CP4291 - IoT - Answer Key
If you need further assistance or specific topics explained, feel free to ask!
Write the purpose of different headers of 6LoWPAN
In 6LoWPAN (IPv6 over Low-Power Wireless Personal Area Networks), headers are
designed to make IPv6 feasible on constrained networks like IEEE 802.15.4. These headers
compress and optimize the data transmission process.
Compare ZigBee and ZigBee IP.
Feature ZigBee ZigBee IP
ZigBee Protocol Stack
Based on IP (IPv6) over IEEE
Protocol Stack (Proprietary layers over IEEE
802.15.4 using 6LoWPAN
802.15.4)
IP Compatibility ❌ Not IP-based ✅ Fully IP-based (specifically IPv6)
Uses short (16-bit) and long (64-
Addressing Uses standard IPv6 addressing
bit) addresses
ZigBee’s own AODV-based mesh RPL (Routing Protocol for Low-
Routing Protocol
routing Power and Lossy Networks)
Limited to ZigBee-certified High interoperability with other IP-
Interoperability
devices based systems (e.g., IoT cloud)
Gateway Requires a gateway to connect to Direct IP connectivity
Requirement IP-based networks needed
ZigBee security based on AES- IP-layer and transport-layer security
Security
128 (e.g., IPSec, DTLS)
Complexity Less complex, simpler stack More complex due to IP-based stack
Home automation, industrial Smart grid, energy management, IoT
Use Cases
control, remote sensing applications
Give the advantages of Energy storage module