Scribd
Upload
45 views2 pages

Request for Quotation: Steel Standards

Peoples Steel Mills Limited is requesting quotations for various standard reference materials, including Ni-alloy and Ti-alloy, with specific requirements for certificates of analysis and traceability. The quotations are due by April 14, 2025, and must be sent to the procurement office, with delivery expected within 30 days after the purchase order. The validity of the quotations is set for 45 days, and payment will be made within 45 days of receipt.

Uploaded by

eastern.boy007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views2 pages

Request for Quotation: Steel Standards

Peoples Steel Mills Limited is requesting quotations for various standard reference materials, including Ni-alloy and Ti-alloy, with specific requirements for certificates of analysis and traceability. The quotations are due by April 14, 2025, and must be sent to the procurement office, with delivery expected within 30 days after the purchase order. The validity of the quotations is set for 45 days, and payment will be made within 45 days of receipt.

Uploaded by

eastern.boy007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

PEOPLES STEEL MILLS LIMITED

Manghopir, Karachi.
REQUEST FOR QUOTATION
R
RFQ NO. PSM/LP-55/PR-24358/24201
M/s.
. ISSUED ON 07-APR-25
.
.- DUE ON 14-APR-25

Dear Sirs,
We invite you to quote for the following material on F.O.R PSM site basis inclusive of all Goverment taxes and levies
on the terms and conditions attached herewith valid for 45 days. Your offer must reach the office of the undersigned by
the date mentioned above.

S. NO. DESCRIPTION QUANTITY RATE


1 STANDARD REFERENCE MATERIAL OF NI-ALLOY 1 BTL
STANDARD # IARM-191A, NOTE: SUPPLIER SHOULD
PROVIDE CERTIFICATE OF ANALYSIS WITH
TRACEBILITY. THE STANDARDS SHOULD BE IN CHIPS
FORM.

2 STANDARD REFERENCE MATERIAL OF TI-ALLOY 1 BTL


STANDARD # IARM-311A, NOTE: SUPPLIER SHOULD
PROVIDE CERTIFICATE OF ANALYSIS WITH
TRACEBILITY. THE STANDARDS SHOULD BE IN CHIPS
FORM

3 STANDARD REFERENCE MATERIAL OF TI-ALLOY 1 BTL


STANDARD # IARM-271A, NOTE: SUPPLIER SHOULD
PROVIDE CERTIFICATE OF ANALYSIS WITH
TRACEBILITY. THE STANDARDS SHOULD BE IN CHIPS
FORM.

4 STANDARD REFERENCE MATERIAL OF STEEL STANDARD 1 BTL


# IARM-308A, NOTE: SUPPLIER SHOULD PROVIDE
CERTIFICATE OF ANALYSIS WITH TRACEBILITY. THE
STANDARDS SHOULD BE IN CHIPS FORM.

5 STANDARD REFERENCE MATERIAL OF STEEL STANDARD 1 BTL


# IARM-309A, NOTE: SUPPLIER SHOULD PROVIDE
CERTIFICATE OF ANALYSIS WITH TRACEBILITY. THE
STANDARDS SHOULD BE IN CHIPS FORM.

6 STANDARD REFERENCE MATERIAL OF STEEL STANDARD 1 BTL


# MBH-13X14935T, NOTE: SUPPLIER SHOULD PROVIDE
CERTIFICATE OF ANALYSIS WITH TRACEBILITY. THE
STANDARDS SHOULD BE IN CHIPS FORM.

7 STANDARD REFERENCE MATERIAL OF STEEL STANDARD 1 BTL


# ECRM-285-2C, NOTE: SUPPLIER SHOULD PROVIDE
CERTIFICATE OF ANALYSIS WITH TRACEBILITY. THE
STANDARDS SHOULD BE IN CHIPS FORM.

Factory & Procurement Office: Javedan Nagar, Manghopir, Karachi-75890, Pakistan PABX: (92-21) 36770126-27-28-29
Proc.: (92-21) 36770121, Fax: (92-21) 36770112, Email: procurement@[Link] Web [Link]
Form # 81180009
Revision # 0
PEOPLES STEEL MILLS LIMITED
Manghopir, Karachi.
REQUEST FOR QUOTATION

NOTE : (I)OFFER ON F. O. R. BASIS MUST BE SENT TO THE ATTENTION


OF HEAD (PROCUREMENT) ON FAX NO. 36770112, 35206764 OR
BY COURIER SERVICE AT THE FACTORY ADDRESS.
(E-[Link] & [Link]@[Link])

(II) DELIVERY LEAD TIME SHOULD BE WITHIN 30 DAYS AFTER RECEIPT OF P.O.

(III) PAYMENT WILL BE MADE WITHIN 45 DAYS.

(IV) QUOTATION VALIDTY UPTO 45 DAYS

Yours Sincerely
for PEOPLES STEEL MILLS LIMITED

Factory & Procurement Office: Javedan Nagar, Manghopir, Karachi-75890, Pakistan PABX: (92-21) 36770126-27-28-29
Proc.: (92-21) 36770121, Fax: (92-21) 36770112, Email: procurement@[Link] Web [Link]
Form # 81180009
Revision # 0

You might also like