E27 base

Camera introduction Q1:What should I pay attention to before WiFi conne ction?
Sign up & Login WiFi connection [Link] the APP： click"+"> select"WiFi connection" [Link] the Tips Shown in the APP(pls connect WiFi to JA- 4. Enter the right password of the WiFi that your phone conne Bluetooth configuration 4. Select the Bluetooth signal of the camera, input the WiFi
[Link] "configure the network when you hear the device *** or JAA-***, and then back to Cam720 APP)to find the cted to, Tap"Next Step) password and click Next.
Quick User Guide Note: The reset button position will be different for different
A1:APP permission：Pls turn on GPS and all permissionsselect"allow";
iOS iphone:pls enable location action by setting>privacy>location ser [Link] an account: Click"sign up"> enter Email, set your Power and Reset the camera: Pls plug the adapter for the camera,
Reset the camera by long press the reset button fo r 5 seconds until
tone" > Tap"next step" Camera's WiFi(namedJA-** / JAA-***),after connected it 5. When the device is connected, pls wait patiently until camera 1. Please confirm that the Bluetooth function is turned on. 5. Wait patiently during Bluetooth network configuration, please
models, and the picture is for reference only vices>cam720 APP>enablepreciselocation,select"always" APP pass word, check the verified code 2. After resetting the camera, wait for it "Di" two sounds, until do not exit halfway.
WiFi Camera you hearing "Di-",camera will do self-inspection after "Di-"2 times pls back to cam720 APP is online",then click the video to view
WiFi requirement: Pls ensure the Name and password ofthe router are [Link] camera completes self-test.
Lens Requirement Before WiFi connection: pls read Q1 above: Don't ban
Antenna not more than 16 characters Note: Please ignore if you don't need for Bluetooth network
Note: if you don't want register an account, it can't remote, permissions of the APP 3. In the APP: Click "+" and wait for 1-2 seconds for the APP to
Note: pls take the camera near the router for first connection,cellphone configuration. If you need to use it again, please close APP then
but you canuse stand alone mode to view the camera. This NOTE: some models only support 2.4Ghz WiFi, cellphone connected automatically search for the camera Bluetooth signal.
Microphone connected the same wifi
Mic mode only support Local view 2.4G WiFi for first connection; if camera support 2.4G/5G dual-band re-open.
Reset Key
Q2:What should I pay attention to before Wiredconnection? WiFi, pls choose the right WiFi accordingto the place you want to install
Lens Lens (2.4Ghz signal transfer distanceis longer, 5Ghz is shorter but faster in
A2:Ethernet cable:pls check the cable is working and check the indica
SD card slot speed).
tor of the network port is always on
White LEDs Speaker NOTE：pls confirm the cellphone connected the same wifi of the router
Reset button
MIC Speaker that camera connected.
SD card slot Reset button Network port
lens
SD card slot Q3:How to do if the camera is often offline?
lens
Call buttons Power port A3:Adapter: pls check the adapter and outlet for the camera,or check
Reset button
the camera's record, if there are some broken records, the problem is Keep the camera and router
Reset button White LEDs in power;camera can record without wifi
Power supply Power port White LEDs at a distance of two meters
SD card slot
SD card slot Network: pls check the network,is it normal
Lens Infrared LEDs Card cover APP permission: pls check mobile network permission on the APP is
Download CAM720 APP from APP store or Google play, enable, otherwise, the APP can't work under mobile network. The device connects to the router via WiFi
or by Scanning the QR code above. Reconfigure the camera: delete the camera from the APP> add the
camera after reset the camera as the first connection
Sign up an account by email and login, please read the
instructions carefully before use.
1 2 3 4 5 6 7 8 9 10 11

Wired Connection 1. In the APP,click"+"> select "network cable connection" 1. Return to the device list 1
Share Playback Installation Outdoor camera Important Use Notice Important Use Notice After-sale Service & Tech Support
2. Search and select the IP of the camera,click to add 1 2 3
2. Share the device
1. Back to the device list [Link] the other end of bracket A together with the slot of bracket B, and
Plug the power supply and Ethernet cable to the router: Pls plug the 2
Share your camera with your friends and families [Link] on the playback function and two Record method ava Indoor Camera-stent assembly [Link] camera can be placed on the desktop, or do ceil or Wall mounted. then just push it down. 1. The use of unapproved or incompatible power adaptersmay cause We offer a one-year warranty and lifetime technical support! As long
3. Click the video to view until hearing "camera is online" 3. More function settings
2. Modify the device name [Link] in connection at first connection？
adapter for the camera, and connect the camera with the Ethenet ilable: SDcard record(8-128G) and Cloud Record. [Link] the bracket to the wall and make a mark on the hole to ponch fire, explosion or other dangers. as there is any problem, please feel free to contact thepurchase store,
3. Share equipment [Link] friend should have an account of cam720 APP. [Link] camera can be placed on the desktop, or do ceil or Wall mounted. [Link] a suitable location and install expansion screws on the wall. Pls view the operation video at last page(Scan the QR code toview),
cable to the router 4. Switch image effects
3
holes, and use a 6mm drill bit to get the holes,then Stuff the rubber we will quickly provide an effective solution.
4
[Link] main account, enter the Email of the friend APP account [Link] users can get a trial cloud storage for free,pls don't [Link] the bracket to the wall and make a mark on the hole to ponch for example, if it's a wooden wall,expansion screws are not and pls view wifi connection steps from Page6, if still failed, pls message
Reset the camera: Long-press the reset button about 5-8s until you
4 5 6 7
4. SD card setup holes, and use a 6mm drill bit to get the holes,then Stuff the rubber stopper into the hole. [Link] product and accessories contain some small parts to avoid
5. Turn on the microphone 5 miss it. requirement. seller to get support,we also offer online support if you need.
hearing Prompted, select wired connection to connect it. or scanthe QR code of the account to share it. stopper into the hole. hildren contact and cause swallowing small parts, causing E-mail: technicalreply@[Link] market@[Link]
8
6. Screenshot to save the image 6 5. Detection alarm settings [Link] card record supports 3 record modes: 24/7 continuous, [Link] the bracket with the hole position and tighten the screws.
[Link] the bracket with the hole position and tighten the screws. Fix the [Link] the bracket with the hole position and tighten the screws. suffocation or other hazards, in addition, this product is not a toy, [Link] a router,camera is offline？
NOTE: pls read Q2 above if there is a problem in wired connection if 9 10
6. Buy cloud storage [Link] set the permission on this shared account. motion-triggered, scheduled record. Fix the body, hold the body and turn it tightly. children should be used under adult supervision.
7. Swich into Full-screen image
7
body, hold the body and turn it tightly. By scanning the QR code below to access Youtube,Selectthe right
the camera has a Network port, it supports wired/WiFi connection, pls delete the camera from the APP, and take the camera to near the
8
7. Image Flip: upside down operation video for your camera according to APPand Model of the
otherwise, pls select wifi connection to connect. [Link] (SD card Playback | Cloud Playback) 3. Please use this product within the appropriate temperature range. new router,power and reset it, search and add it.
11
9
camera Or message seller to get the operation video directly.
12 9. Setting of cruise 10 8. Choose a call mode When the ambient temperature is too high or too low,it may cause [Link] record？
13
11
9. Enable/Disable Auto tracking errors, avoid rain or moisture on the product and its accessories,
10. Preset point settings 1,Check the status of the SD card in the APP
so as not to affect the use of the product.
11. TZP rotation control 10,Indicator light switch 2,Check the record setup support
4 6 Plastic Bracket
bracket B

4. Suitable for equipment, suitable for areas with an altitude of 2000 3,format SD card
5 2 12. Turn on voice intercom 11. Choose night vision mode expansion pipe Screws
3 bracket A
meters and below. 4,change a SD card to test
12. Set the time zone Bracket Plastic expansion pipe 5,message Seller to get
13. Turn on screen record function
1

1. Start Live video 13. Switch WIFI network Screws [Link] device should be under a good wifi signal area,pls avoid choosing [Link] is offline？ Operation videos
14. Camera information a closed environment installation which may cause bad signal.
2. Subscribe Cloud storage Read the Q3 at page4 and follow it to check, if there is further question, (Scan the QR code to view)
12

3. More functions setup 13 15. Camera version number pls message seller to get support
4. User information 14
16. Delete the camera
15 [Link] instructions are not detailed enough？
5. Modify the device name [Link] the camera to
It's general quick user guide,so less many details,pls contact seller to
6. Add more cameras
16
another account Note: Different models will have different appearance
get the E-user manual and operation video accordingto your order.
Connect to the router LAN port through a network cable 17 and installation method, the picture is for reference only

12 13 14 15 16 17 18 19 20 21 22 23