PG-SW023说明书 100G铜版纸双面印刷/单色印刷 尺寸：105x142mm

2. Press one or more buttons which need to be copied, for example,

Operation mode:
Electrical Parameters: PC wired connect mode: press one or combination buttons of "A / B / X / Y / L1 / L2 / R1 / R2 / L3 / R3 / UP /
N-S BT Gamepad Android System N-S console
DOWN / LEFT / RIGHT / +",
press the corresponding programming button again to confirm, and exit automatically,
1.
User Manual(PG-SW023) 1.Working voltage:DC3.7V Then complete the programming setting, and the mode indicator light will returns to the
Android wireless mode Android wired mode N-S wireless mode
Product Application: 2.Working current:<30mA Paired mode
display state before set.
（long press 3 seconds） Y+Home L+Home B+HOME 3. After set successfully, the programming button has the same function of a single
1.This controller is used for playing games on N-S console /P3/ Android and PC (Win 7 /8/10). 3.static current:<20uA Console assign button or multiple buttons programmed..
Indicator LED 1 LED 1 automatically Clear programming button function:
If NOT use it on the N-S console, the function on A and B buttons will be interchanged, the
4.Continuous gameplay time: about 15H Support vibration and
function on X and Y buttons will be interchanged. Remark Not support vibration and six axis function 1. Press and hold the programming button that need to be cleared (left or right ) and
six axis function
2.Function button of this gamepad is one-one corresponding with N-S_pro gamepad, and with 5.Input voltage/current:DC5V/500mA 2. press "+" button (start) at the same time. After the mode indicator lights LED1, LED4
TURBO continuous function. P3 Console PC and LED2, LED3 flash alternately, release the buttons.
6.Charging time:about 2 hours
3.This controller support vibration and six axis gyroscope function, provide better game 2. Press the programming button again to cancel the function, and exit automatically, and
7.BT 3.0,Transmission distance:≤8M Android Mode(Wireless) : P3 wireless mode P3 wired mode PC wired mode
the mode indicator light will return to the display state before set. The program button
experience for game player. 3. Paired mode function can be cleared.
4. With MACRO function, the button on the back can be set as commonly used buttons or 8.Battery capacity: 400mAh （long press 3 seconds） A+Home L+Home L+Home
combination buttons, easy to use. (for Android standard HID mode,Note:under Android mode, no PC P3 mode：LED2
9.Standby time:up to 30days once fully charged Indicator Console assign automatically Controller charging/Sleep/wake up/turn off function:
5.Ergonomic design, feels comfortable. vibration & six axis gyroscope function): P3 Mode(Wireless): PC 360 mode：LED3
Due to the official game platform software upgrades or source code changes and other not For wireless mode, should insert the USB cable to enter Controller charging/Sleep/wake up function
While the controller is off, press Y + HOME key at same time for 2 seconds to enter Android Remark searching status,once paired successfully,unplug the Support vibration but
resist factors caused some of the game can not be played or connected with our Gamepad, 1.While controller is turn off, long press A + HOME USB cable, then the gamepad enter the 1.Charging the controller when the controller is turned off : LED 1-LED 4 indicators flash
N-S Mode: standard paired mode. The LED1 light flash quickly, when the Android phone/Android tablet/ not six axis function simultaneously, LED 1-LED 4 indicators will be turned off after fully charge.
combination key for 2 seconds to turn on the wireless connection mode.
iPega company has no responsibility.iPega reserve the right of final interpretation for this. 2. Charging under connecting mode, LED indicator light will flash and will be always on after fully
Android smart TV search the "PG-SW023" buletooth name, select paired ! After pairing gamepad , the 4 LED indicators will flash simultane-
charged.
Button Illustration 1.Pair the controller to the console (for the first time)：Turn on the Switch Console, from the HOME successfully， LED1 will be always on. once successfully paired,press the HOME button, ously. Turn on/off for TURBO Fuction: 3.Sleep/wake up function: the controller will enter into sleeping mode automatically, if there are
Menu, select Controllers, then Change Grip and Order. LED1 flash slowly , reconnect automatically. 2. Connect the controller with the P3 console via a no operation within 5 minutes, press the HOME key to wake up and reconnect when need to restart.
1.Action keys include (A/B/X/Y/L/ZL/R/ZR) 8 keys, any action keys can set TURBO function by
Capture Button HOME Button USB cable , press the HOME key to paired. 4.When the power is low, the correspnding LED falsh quickly;
2.While the controller is turned off, press the B + HOME key for 2 seconds to turn on controller manual operation.
3.Once paired successfully, the corresponding 2.Setting method: long press action key, and then press the TURBO key to enable TURBO function.
“-”Button and enter into paired mode, LED2 will be cycle flash quickly, when the one or several LED lights Notes:
“+”Button channel LED will be always on, it showing gamepad Long press the action key, and then press the TURBO key to disable TURBO function
(SELECT） (START) always on (console automatically assigned), paired successfully, and then press A button to operate enter into P3 operation mode . P3 Game console 3.When gamepad are turn off, power off, slept, or restart, TURBO function will be closed 1. Please do not store this product in wet or high-temperature areas.
Left 3D& Pic 1
downward L3 4.Unplug the USB cable, controller enter into wireless automatically. If want to enable TURBO function again, need to reset to satrt TURBO function. 2. Don't knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary
A/B/X/Y Button 3.Once gamepad paired successfuly before :By long press the HOME key for 2 seconds to turn
connection mode. damage to the product.
on gamepad ,the gamepad will automatically paried the console, then press the A button to operate.
Programming function: 3. The product has built-in batteries, and please don’t discard them together with the garbages.
D-pad Right 3D& 4. Non professional personnel should not disassemble the product, otherwise it will not be
downward R3
Android device/P3 console wired connnection mode: covered in the after-sales warranty service.
Pic 2 Right programmable key Left programmable key
5. Due to the official game platform software upgrade or source code changes and other not
1.While the controller is turn off, long There are programmable buttons on the left and right sides at the bottom of the gamepad. resist factors caused of some games can not be played or connected with our gamepad. Our
Turbo Button Each programming button can map the function of a single button or program multiple buttons, company has no responsibility, we reserves the right of final interpretation for this.
press L+HOME combination key for 2
such as A / B / X / Y / L1 / L2 / R1 /R2 / L3 / R3 / UP / DOWN / LEFT / RIGHT / +" buttons, each
LED Indicator seconds to turn on the gamepad, LED4
Pic 3 PG-SW023
can be programmed.
flash quickly ,connected gamepad to A single programming button allows combinations buttons to be set (up to 12 buttons). Accessories List
Android devices/P3 console via the The program button DON’T support TURBO function.
R L USB cable, the LED will be always The programming button has the memory function. No matter what state the controller is in
P3 Game console (sleep, shuts down or restarts), the gamepad will save the setting set last time.
ZR on(console automatically assigned),
Programming method:
ZL paired successfully. 1. Press and hold the (left or right) programming button need to be set and press "+" button at
2.Note :for Android devices no vibration the same time. After the indicators LED1, LED4 and LED2, LED3 flash alternately,release the
Type-C port Pic 2 Pic 1
and six-axis gyroscope functions. buttons to enter the programming mode; Wireless gampad x1 Type-C cable x1

产品特性参数： 无线连接安卓设备 无线连接P3主机： P3主机 PC电脑

手柄充电/休眠/唤醒/关机功能:
P3无线模式 P3有线模式 PC有线模式
1.工作电压：DC3.7V （安卓标准HID模式，备注：安卓模式下，无震动功能、无六轴功能） 1. 在手柄关机状态下，长按A+HOME
N-S无线手柄 2.工作电流：<30mA 组合键2秒开机，手柄4个LED指示灯
模式配对(长按3秒) A+Home L+Home L+Home
PC P3模式：LED2
手柄充电/休眠/唤醒功能
产品说明书(PG-SW023)中文版 3.静态电流: <20uA 在手柄关机状态下，同时按Y+HOME键2秒进入安卓标准游戏配对模式，手柄LED1灯快闪，当安卓 1. 关机状态下充电时LED1-LED4指示灯灯同时闪烁，充满熄灭。
同时闪烁。 指 示 灯 主机自动分配 PC 360模式： LED3
4.满电持续使用时间: 约15H 手机/安卓平板/安卓智能电视搜索到“PG-SW023”设备名时，选择连接。连接成功后，手柄LED1 2. 开机连接设备时充电当前LED指示灯闪烁，充满长亮。
产品适用说明: 2. 使用一条USB数据线将手柄与P3主
无线模式下进入搜索状态时需插USB数据线，
5.输入电压/电流：DC5V/500mA 灯常亮；已成功连接过，可以直接按HOME键，LED1灯慢闪，自动回连。 备 注 支持震动、不支持六轴 3. 睡眠/唤醒功能：手柄在5分钟内不使用会进入休眠状态。当需要重新使用时需按HOME键唤醒
机连接，按HOME键配对。 连接成功时拔掉USB线，手柄进入无线连接
1.本手柄适合操作N-S/P3/安卓及电脑(Win7以上系统)设备上的游戏。（若用于N.S外的设备， 6.充电时间：约2小时 推荐下载游戏平台：手机扫描说明书首页二维码关注艾派格官方公众号, 按提示下载并安装游戏平台 即可回连。
3. 配对成功后，对应的通道LED长亮
A与B键交换，X与Y键交换）。 （葡萄游戏厅），进入平台下载所需要的游戏。
7.无线3.0，传输距离：≤8M 4. 电池电量不足时，对应的指示灯将快闪提示，请及时充电。
2.本手柄的功能按键一一对应N-S_pro手柄的按键功能，并且支持TURBO连打功能。 ，手柄进入P3模式操作。
8.电池容量：400mAh TURBO功能开启/关闭：
3.本手柄支持震动及六轴功能，使玩家得到更好的游戏体验。 4. 拔掉USB线，手柄进入无线连接。
9.待机时间：满电放置30天 图1
4.结构符合人体工程学,手感舒适。
1. 动作键包括(A/B/X/Y/L/ZL/R/ZR) 8个按键，均可手动设置TURBO功能。
注意事项：
5.支持按键编程功能，可把常用的功能键或组合键设置到底部
的编程键上，方便使用。 2. 设置方法：长按动作键，同时再轻按TURBO键，TURBO功能开启；长按动作键，同时轻按
产品使用说明: 1. 请不要把本产品在潮湿或高温地方存储。
因官方游戏平台软件升级或源代码变更等不可抗拒的因素 TURBO键，TURBO功能关闭。
造成部分游戏无法与本产品连接操作，我公司不负任何责任。 2. 不要敲击、摔打、刺穿、或试图去分解本产品，以免对产品造成不必要的损害。
N-S主机连接： 图2 3. 产品断开连接后，之前设置TURBO功能自动清除，若启用TURBO功能时，必须重新设置。
对此我公司保留最终解释权。 3.产品内置电池，请勿和垃圾一起丢弃。
ipega官方微信公众号 1.首次连接手柄到主机：打开N-S 主机，在N-S主机主界面，用手指触摸点击：手柄 有线连接安卓设备/P3主机：
技术支持QQ群：837350687 客服电话：0755-27918998 （关注微信号 下载游戏大厅） 4. 非专业人员误拆卸本产品,否则不在售后保修服务内。
在线时间：周一至周五9:30-17:30 →更改握法/顺序，进入到主机配对模式界面。 编程功能： 5. 因官方软件升级或源代码变更等不可抗拒的因素造成部分游戏无法与本产品连接操作，我公
2.在手柄关机状态下，按B+HOME组合键2秒开启手柄并进入配对模式，手柄上的LED2灯开始快 图3 右编程按键 左编程按键
1. 在手柄关机状态下，长按L+HOME组 司不负任何责任。对此我公司保留最终解释权。
功能按键图示 速循环闪烁，当单个或多个LED常亮时（主机自动分配），手柄与主机配对成功，然后按A键操作。 PG-SW023
合键2秒开机，手柄LED4灯快闪，用
手柄底部左右两侧各配备一个可编程按键。
截屏键 HOME键 3.已成功连接过：通过长按HOME键2秒开启手柄，手柄与主机自动连接，然后按A键进行操作。 每个编程键可以对单个或多个按键进行功
USB数据线将手柄连接到安卓设备/P3主 能映射编程，如A/B/X/Y/L1/L2/R1/R2/L3/ 产品清单
“-”键 机时，手柄LED灯长亮（主机自动分配 手柄底部编程按键
“+”键（START) R3/上/下/左/ 右/+键均可设置编程。
(SELECT)
），连接成功。 单个编程键对应允许最多可设置12个键组合。
左3D及下压L3键 2 编程键无TURBO连打功能。
A/B/X/Y功能键 2. 安卓设备下不支持振动、六轴功能。
编程键具有记忆功能，无论手柄休眠，关机，重启，手柄都会保存最后一次的设置。

有线连接PC设备：
十字方向键 右3D及下压R3键 编程方法：
1. 同时按住需要设置的（左或右）编程键和“+”键，模式指示灯LED1、LED4和LED2、LED3
1. 在手柄关机状态下，长按L+HOME组合 无线手柄 x1 说明书 x1 Type-C线 x1
交替快闪后，松开按键，进入编程设置模式；
键2秒开机，手柄LED4灯快闪，用USB数 操作使用模式：
Turbo键 2. 按下需要复制的一个或多个常规功能键，如按下"A/B/X/Y/L1/L2/R1/R2/L3/R3/上/下/左/右/+"
据线将手柄。 中的一个或多个键成组合键后，再次按下对应的编程键确认并自动退出，即完成编程设置，模
状态指示LED灯
连接到PC设备，此时为PC/P3有线模式， 安卓系统 N-S主机 式指示灯又回到设置前的显示状态。
手柄LED2灯长亮。
3. 设置成功后，编程键则具有编程复制的某单个键或多个键相同的功能。
安卓无线模式 安卓有线模式 N-S无线模式
R1键 L键
2. 通过长按home键3秒可切换PC Xb 360
模式配对(长按3秒) Y+Home L+Home B+HOME 清除编程键功能：
ZR键 模式，此时手柄LED3灯长亮； 1. 同时按住需要清除的编程按键（左边编程键或者右编程键）和“+”键（START），模式指
ZL键 指 示 灯 LED 1 LED 1 主机自动分配
3. 备注：有线连接的模式下，支持振动功 示灯LED1、LED4和LED2、LED3交替快闪后，松开按键.
Type-C 接口 备 注 不支持震动、六轴 支持震动、六轴
能、无六轴功能。 2. 再次按下需取消功能的编程键后自动退出，模式指示灯回到设置前的显示状态。即可清除编
程键功能。