Scribd
Upload
526 views2 pages

MR3461 Sensors Lab Exam Guide

The document provides instructions for a practical exam on sensors and instrumentation laboratory for a mechatronics engineering course. It lists 20 experiments to be performed involving topics like sample and hold circuits, instrumentation amplifiers, load cells, strain gauges, frequency to voltage conversion, sound level measurement, analog to digital conversion, RTDs, digital signals, transducers, thermocouples, LVDTs, and humidity measurement. Students will be evaluated on apparatus used, circuit diagrams, procedures, results, viva voce, records, and total marks.

Uploaded by

Scientist Sakthivel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
526 views2 pages

MR3461 Sensors Lab Exam Guide

The document provides instructions for a practical exam on sensors and instrumentation laboratory for a mechatronics engineering course. It lists 20 experiments to be performed involving topics like sample and hold circuits, instrumentation amplifiers, load cells, strain gauges, frequency to voltage conversion, sound level measurement, analog to digital conversion, RTDs, digital signals, transducers, thermocouples, LVDTs, and humidity measurement. Students will be evaluated on apparatus used, circuit diagrams, procedures, results, viva voce, records, and total marks.

Uploaded by

Scientist Sakthivel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CHENNAI INSTITUTE OF TECHNOLOGY

(An Autonomous Institution, Affiliated to Anna University, Chennai)


CHENNAI -600 069
B.E/[Link] DEGREE END SEMESTER PRACTICAL EXAMINATIONS
APRIL/MAY- 2023
IV - Semester
MR3461 – SENSORS AND INSTRUMENTATION LABORATORY

(B.E/[Link] – Mechatronics Engineering)


(Regulations 2021)
Time : Three hours Maximum : 100
Marks

Apparatus Circuit
Aim Procedure Result Viva voce Record Total
Required Diagram

10 10 25 25 10 10 10 100

1. Demonstrate the operation of sample and hold circuit.

2. Design and an Instrumentation amplifier using an op-amp.

3. Compare the characteristics of load cell and strain guage with its calibration.

4. Convert the given frequency 50Hz into its equivalent voltage using frequency to voltage
converter.

5. Demonstrate the operation of sound level meter and design and implement a circuit to
measure the sound.

6. Design a flash type analog to digital converter and test its output.

7. Conduct an experiment to obtain the step response of RTD by suddenly inserting RTD
to 60 degree Celsius. Comment on the sensitivity of RTD.

8. Using SCILAB convert audio signal into frequency domain signal (FFT).

9. Experimentally Compare the two digital inputs 1011 and 1100 using digital comparator.
10. Compare the performance of resistive and capacitive type transducer for humidity
measurement.

11 Convert the given analog voltage of 10V to its equivalent digital using flash type ADC.

12 Obtain the characteristics of any one type of thermocouple from room to 100 degree
Celsius. Comment on its linearity around 50 degree Celsius.

13 Obtain the characteristics of LVDT with positive and negative displacement. Comment
on the linearity and symmetry of LVDT for the positive and negative displacement.

14 With the help of Labview convert the audio signal of 50 Hz into its frequency domain
signal (FFT).

15 Demonstrate how the linear displacement is converted into voltage using LVDT.

16 Design and implement an Instrumentation amplifier for the output voltage Vo = 20V.

17 Design and implement a digital comparator and test its output.

18 Conduct a suitable experiment to obtain the calibration curve for strain gauge. Obtain
the sensitivity, Young’s modulus and gauge factor of the given strain gauge from the
graph.

19 Demonstrate how humidity can be measured using resistive type tranducer.

20 Demonstrate how the continuous varying signal is converted into pulse signal? Explain
the operation with the help of circuit diagram.

**********

You might also like