SECTION 1

GENERAL

CONTENTS
Group 1 Specification
Specifications ...........................................T1-1-1
Working Ranges and
Machine Transportation Dimensions .......T1-1-4

Group 2 Component Layout

Main Components ....................................T1-2-1
Electrical System (Overall System)...........T1-2-4
Electrical System
(Monitor and Switches) ...........................T1-2-9
Pump Device ..........................................T1-2-13
Swing Device .........................................T1-2-13
Travel Device .........................................T1-2-14

Group 3 Component Specification

Engine......................................................T1-3-1
Engine Accessories ..................................T1-3-4
Hydraulic Component ...............................T1-3-4
Electrical Equipment.................................T1-3-7

152T-1-1
(Blank)

152T-1-2
 GENERAL / Specifications
SPECIFICATIONS
EX60-5
A
G C

E
P
M D N
O
K K
I J
L H

M152-11-005

Model Unit Standard With Blade

Type of Front-End Attachment - 1.62 m Standard Arm
Std. Bucket Capacity (Heaped) m (yd )
3 3
PCSA : 0.28(0.37), CECE : 0.25
Operating Weight kg(lb) 6300(13890) 6830(15060)
Basic Machine Weight kg(lb) 5050(11130) 5580(12300)
Engine - Nissan A-BD30 41 kW/2200 min-1(55 PS/2200 rpm)
A: Overall Width mm(ft in) 2340(7’ 8”) 2390(7’ 10”)
B: Cab Height mm(ft in) 2570(8’ 5”) 2570(8’ 5”)
C: Rear End Swing Radius mm(ft in) 1750(5’ 9”) 1750(5’ 9”)
D: Minimum Ground Clearance mm(ft in) *360(1’ 2”) *360(1’ 2”)
E: Counterweight Clearance mm(ft in) *760(2’ 6”) *760(2’ 6”)
F: Engine Cover Height mm(ft in) *1690(5’ 7”) *1690(5’ 7”)
G: Overall Width of Upperstructure mm(ft in) 2255(7’ 5”) 2255(7’ 5”)
H: Undercarriage Length mm(ft in) 2765(9’ 1”) 2765(9’ 1”)
I: Undercarriage Width mm(ft in) 2200(7’ 3”) 2200(7’ 3”)
J: Sprocket Center to Idler Center mm(ft in) 2140(7’ 0”) 2140(7’ 0”)
K: Track Shoe Width mm(ft in) 450(1’ 6”) 450(1’ 6”)
L: Blade Width mm(ft in) - 2300(7’ 7”)
M: Blade Height mm(ft in) - 420(1’ 5”)
N: Blade Bottom Height Position mm(ft in) - *425(1’ 5”)
O: Blade Bottom Lowest Position mm(ft in) - *290(11.5”)
P: Maximum Approach Angle Deg. - 25.4
Ground Pressure kPa(kgf/cm , psi) 2
30.4(0.31, 4) 33.0(0.34, 5)
Swing Speed min (rpm)
-1
15.0 15.0
Travel Speed (Fast / Slow) km/h(mph) 4.8/3.7(3.0/2.3) 4.8/3.7(3.0/2.3)
Gradeability %(Deg.) 70(35) 70(35)
*Dimensions with this mark do not include the shoe lug height.

T1-1-1
 GENERAL / Specifications

EX75UR-3

M190-11-001

Model Standard
Type of Front-End Attachment − Offset Type, 1.81 Standard Arm
3 3
Standard Bucket Capacity (Heaped) m (yd ) PCSA: 0.28 (0.37), CECE: 0.25
Operating Weight kg (lb) 7600 (16755)
Basic Machine Weight kg (lb) 6100 (13450)
Engine − NISSAN A-BD30 40.5 kW / 2000 min-1
(55 PS / 2000 rpm)
A: Overall Width mm (ft in) 2280 (7’ 6”)
B: Cab Height mm (ft in) 2700 (8’ 10”)
C: Rear End Swing Radius mm (ft in) 1140 (3’ 9”)
D: Minimum Ground Clearance mm (ft in) 380 (1’ 3”)
E: Counterweight Clearance mm (ft in) 785 (2’ 7”)
F: Engine Cover Height mm (ft in) 1705 (5’ 7”)
G: Undercarriage Length mm (ft in) 2895 (9’ 6”)
H: Undercarriage Width mm (ft in) 2300 (7’ 7”)
I: Sprocket Center to Idler Center mm (ft in) 2280 (7’ 6”)
J: Track Shoe Width mm (ft in) 450 (1’ 6”)
2
Ground Pressure kPa (kgf/cm ) 33 (0.34)
-1
Swing Speed (Fast / Slow) min (rpm) 12 / 5.5
Travel Speed km/h (mph) 3.4 (2.1)
Gradeability Degree (%) 35 (70)

T1-1-2
 GENERAL / Specifications

EX75URLC-3

M195-11-001

Model Standard
Type of Front-End Attachment − Offset Type, 1.62 Standard Arm
3 3
Standard Bucket Capacity (Heaped) m (yd ) PCSA: 0.28 (0.37), CECE: 0.25
Operating Weight kg (lb) 6850 (15100)
Basic Machine Weight kg (lb) 5610 (12370)
Engine − NISSAN A-BD30 40.5 kW / 2000 min-1
(55 PS / 2000 rpm)
A: Overall Width mm (ft in) 2280 (7’ 6”)
B: Cab Height mm (ft in) 2710 (8’ 11”)
C: Rear End Swing Radius mm (ft in) 1140 (3’ 9”)
D: Minimum Ground Clearance mm (ft in) *360 (1’ 2”)
E: Counterweight Clearance mm (ft in) *760 (2’ 6”)
F: Engine Cover Height mm (ft in) *1680 (5’ 6”)
G: Undercarriage Length mm (ft in) 2920 (9’ 7”)
H: Undercarriage Width mm (ft in) 2300 (7’ 7”)
I: Sprocket Center to Idler Center mm (ft in) 2290 (7’ 6”)
J: Track Shoe Width mm (ft in) 450 (1’ 6”)
2
Ground Pressure kPa (kgf/cm ) 30.4 (0.31)
-1
Swing Speed (Fast / Slow) min (rpm) 12 / 5.5
Travel Speed km/h (mph) 4.3 (2.7)
Gradeability % (Degree) 70 (35)
*Dimensions with this mark do not include the shoe lug height.

T1-1-3
 GENERAL / Specifications
WORKING RANGES AND MACHINE TRANSPORTATION DIMENSIONS
EX60-5

Backhoe Face Shovel (Reversed Hoe Bucket)

M152-11-004
M152-11-003

Category 1.62 m Standard Arm 2.12 m Long Arm

Item Backhoe Face Shovel Backhoe Face Shovel
A: Max. Digging Reach mm(ft in) 6310(20’ 8”) 6480(21’ 3”) 6800(22’ 4”) 6950(22’ 10”)

B: Max. Digging Depth mm(ft in) 4150(13’ 7”) 4310(14’ 2”) 4660(15’ 4”) 4810(15’ 9”)

C: Max. Cutting Height mm(ft in) 7150(23’ 6”) 7330(24’ 1”) 7550(24’ 9”) 7720(25’ 4”)

D: Max. Dumping Height mm(ft in) 5070(16’ 8”) 5420(17’ 9”) 5470(17’ 11”) 5860(19’ 3”)

E: Transport Height mm(ft in) 2570(8’ 5”) 2570(8’ 5”) 2690(8’ 10”) 2690(8’ 10”)
[W/O Bucket] [W/O Bucket]
2850(9’ 4”) 2850(9’ 4”)
[With Bucket] [With Bucket]
F: Overall Transport Length mm(ft in) 6080(19’ 11”) 6080(19’ 11”) 6120(20’ 1”) 6120(20’ 1”)
F’: (With Blade) 6330(20’ 9”) 6330(20’ 9”) 6370(20’ 11”) 6370(20’ 11”)
G: Minimum Swing Radius mm(ft in) 1700(5’ 7”) 1700(5’ 7”) 2060(6’ 9”) 2060(6’ 9”)
NOTE: “E: Transport Height” includes the shoe lug height. Other dimensions do not include the shoe lug height.

T1-1-4
 GENERAL / Specifications
EX75UR-3

M192-11-002

M192-11-001

Backhoe

1.81 m Standard Arm

Item
A: Maximum Digging Reach mm (ft in) 6360 (20’ 10”)
B: Maximum Digging Depth mm (ft in) 4250 (13’ 11”)
C: Maximum Cutting Height mm (ft in) 7250 (23’ 9”)
D: Maximum Dumping Height mm (ft in) 5210 (17’ 1”)
E: Overall Transport Height mm (ft in) 2700 (8’ 10”)
F: Overall Transport Length mm (ft in) 6110 (20’ 1”)
G: Minimum Swing Radius mm (ft in) 1140 (3’ 9”)
H: Blade Bottom Highest Position mm (ft in) 420 (1’ 5”)
I: Blade Bottom Lowest Position mm (ft in) 270 (1”)
J: Maximum Offset mm (ft in) Left (Cab Side) 1060 (3’ 6”)
(From the center of front-end attachment) Right 1100 (3’ 7”)
K: Maximum Approach Angle (Degree) 31

T1-1-5
 GENERAL / Specifications
EX75URLC-3

A
T195-01-01-001

Backhoe

Category 1.62 m Standard Arm

Item Backhoe
A : Max. Digging Reach mm(ft in) 6530(21’ 5”)
B : Max. Digging Depth mm(ft in) 4600(15’ 1”)
C : Max. Cutting Height mm(ft in) 7250(23’ 9”)
D : Max. Dumping Height mm(ft in) 5190(17’ 0”)
E : Transport Height mm(ft in) 2730(8’ 11”)
F : Overall Transport Length mm(ft in) 6020(19’ 9”)
G : Minimum Swing Radius mm(ft in) 1680(5’ 6”)
NOTE: “E: Transport Height” includes the shoe lug height. Other dimensions do not include the shoe lug height.

T1-1-6
 GENERAL / Component Layout
MAIN COMPONENTS
EX60-5

3
4
5
6
7
8
9
10

19

11

12
18
13
17 14

16

15 T152-01-02-001

1- Bucket Cylinder 6- Control Valve 11 - Pump Device 16 - Swing Bearing

2- Arm Cylinder 7- Fuel Tank 12 - Engine 17 - Shockless Valve
3- Boom Cylinder 8- Hydraulic Oil Tank 13 - Radiator 18 - Pilot Shut-Off Vale
4- Center Joint 9- Air Cleaner 14 - Oil Cooler 19 - Front/Swing Pilot Valve
5- Swing Device 10 - Muffler 15 - Travel Device

T1-2-1
 GENERAL / Component Layout

EX75UR-3

8
3
7
1

4
5
23 6

22
9

10

11

21
20

19
18
17
16
15 12
14 13

T192-01-02-001

1- Bucket Cylinder 7- Hydraulic Oil Tank 13 - Radiator 19 - Pilot Shut-Off Valve

2- Arm Cylinder 8- Fuel Tank 14 - Oil Cooler 20 - Blade Pilot Valve
3- Boom Cylinder 9- Control Valve 2 15 - Travel Device 21 - Blade Cylinder
4- Control Valve 1 10 - Swing Device 16 - Center Joint 22 - Front/Swing Pilot Valve
5- Swing Mode Selection 11 - Pump Device 17 - Swing Bearing 23 - Offset Pilot Valve
Valve
6 - Pilot Filter 12 - Engine 18 - Shockless Valve

T1-2-2
 GENERAL / Component Layout

EX75URLC-3

4 8
5
6 7

20 9
10

11

19
18
17
16
15
12
13 T195-01-02-001
14

1- Bucket Cylinder 6- Pilot Filter 11 - Pump Device 16 - Center Joint

2- Arm Cylinder 7- Hydraulic Oil Tank 12 - Engine 17 - Swing Bearing
3- Boom Cylinder 8- Fuel Tank 13 - Radiator 18 - Shockless Valve
4- Control Valve 1 9- Control Valve 2 14 - Oil Cooler 19 - Pilot Shut-Off Valve
5- Swing Mode Selection 10 - Swing Device 15 - Travel Device 20 - Front / Swing Pilot Valve
Valve

T1-2-3
 GENERAL / Component Layout
ELECTRICAL SYSTEM (Overall System)
EX60-5 1 2 3 4 5 6 7 8 9 10 11

12

26

25

24

13

14

23
15

22 21 20 19 18 17 16
T152-01-02-002

1 - MC(Main Controller) 8 - Work Light Relay(R3) 15 - Pump Control Solenoid 22 - Battery Relay
Valve
2 - QHS Controller 9 - Load Dump Relay(R1) 16 - Engine Oil Pressure Switch 23 - Battery
3 - Wiper Relay(R9) 10 - Pressure Switch 17 - Coolant Temperature 24 - Learning Plug Connector
(Front/Swing) Sensor(QHS Controller)
4 - Wiper Relay(R8) 11 - Pressure Relay(Travel) 18 - Overheat Switch 25 - [Link] Connector
5 - Wiper Relay(R7) 12 - Fuel Sensor 19 - Coolant Temperature 26 - Fuse Box
Sensor(Coolant Tempera-
ture Gauge)

6 - Wiper Relay(R6) 13 - EC Motor･EC Sensor 20 - Starter Relay

7 - Horn Relay(R5) 14 - Air Restriction Switch 21 - Air Heater Relay

T1-2-4
 GENERAL / Component Layout
EX75UR-3

2
1 3

4
5 7

6 8

9
10

A 11

12
13

24 25
View A

24
23
Relay
22
21

27 14
15
16
17
18 19
T192-01-02-002

26
T192-01-02-008

1 - Arm Angle Sensor 8 - Starter Relay 15 - Engine Oil Pressure Switch 22 - Auto-MARCCINO Control
Unit
2 - Offset Angle Sensor 9 - Intake Air Heater Relay 16 - Coolant Temperature 23 - Engine Speed Control
Sensor Sensor
(For Engine Preheat)
3 - Work Light 10 - Fuel Sensor 17 - Overheat Switch 24 - Pressure Switch
(Front⋅Swing)
4 - Boom Angle Sensor 11 - Emergency Stop Solenoid 18 - Coolant Temperature 25 - Pressure Switch (Travel)
Valve Sensor (For Coolant
Temperature Gauge)
5 - Electrolyte Level Switch 12 - EC Motor,⋅EC Sensor 19 - Alternator 26 - Solenoid Valve
(For Precise Swing Mode)
6 - Battery 13 - Horn 20 - MC (Main Controller) 27 - Pressure Switch (Swing)
7 - Battery Relay 14 - Pump Control Solenoid 21 - Heater
Valve

T1-2-5
 GENERAL / Component Layout

Relay and QHS Controller

1
2
3
4

9
8
7
6
5
T192-01-02-007

1 - Horn Relay 4 - Swing Relay 6 - Work Light Relay 8 - Load Dump Relay
2 - Wiper Relay 5 - Solenoid Valve Relay 7 - IC/U Relay 9 - QHS Controller
3 - Washer Relay

T1-2-6
 GENERAL / Component Layout
EX75URLC-3

4
2
3 5
6

7
A

8
9

18
Relay
17
16
10
11
12, 13, 14
15
T195-01-02-002

1 - Work light 6 - In take Air Heater Relay 11 - Engine Oil Pressure Switch 16 - MC(Main Controller)
2 - Electrolyte Level Switch 7 - Fuel Sensor 12 - Coolant Temperature 17 - Heater
Sensor (For Engine Pre-
heat): Pump Side
3 - Battery 8 - EC Motor, EC Sensor 13 - Overheat Switch 18 - Engine Speed Control
: middle Sensor
4 - Battery Relay 9 - Horn 14 - Coolant Temperature
Sensor (For Coolant
Temperature Gauge)
: Radiator Side
5 - Starter Relay 10 - Pump Control Solenoid 15 - Alternator
Valve

T1-2-7
 GENERAL / Component Layout

19 20
View A

21

22

T192-01-02-008

Relay and QHS Controller

23
24
25
26

30

29
28
27

T195-01-02-003
19 - Pressure Switch 22 - Pressure Switch (Swing) 25 - Washer Relay 28 - Work Light Relay
(Front ⋅ Swing)
20 - Pressure Switch (Travel) 23 - Horn Relay 26 - Swing Relay 29 - Load Dump Relay
21 - Solenoid Valve 24 - Wiper Relay 27 - Solenoid Valve Relay 30 - QHS Controller
(For Precise Swing Mode)

T1-2-8
 GENERAL / Component Layout
ELECTRICAL SYSTEM (Monitor and
Switches)
EX60-5

2
3
4
5
6

7
2 8

M152-01-014
Monitor Panel (5) Switch Panel (6)

11 12 13 14 15
18 19 20 21 22 23 24 25 26 27 28 29

10

M152-01-016 M152-01-002

17 16

1 - Radio 9 - Coolant Temperature 16 - Hour Meter 23 - Slow Speed Mode Indicator

Gauge
2 - Horn Switch 10 - Warm Up Complete Indi- 17 - Fuel Gauge 24 - Travel Mode Switch
cator
3 - Key Switch 11 - Alternator Indicator 18 - Auto-Idle Indicator 25 - Buzzer Deactivation Switch
4 - Engine Control Dial 12 - Engine Oil Pressure Indi- 19 - Auto-Idle Switch 26 - Work Light Indicator
cator
5 - Monitor Panel 13 - Preheat Indicator 20 - Ｅ Mode Indicator 27 - Work Light Switch
6 - Switch Panel 14 - Overheat Indicator 21 - Ｅ Mode Switch 28 - Wiper Indicator
7 - Optional Switch 15 - Air Filter Restriction Indi- 22 - Fast Speed Mode Indicator 29 - Wiper Switch
cator
8 - Optional Switch

T1-2-9
 GENERAL / Component Layout
EX75UR-3
Right Console
Left Console 1
8 9

System
Monitor

23
2
22

21 10
3
20
4 19
11
5
18 12
6
17 13
16 14

M192-01-001

15
M192-01-002

System Monitor
Seat Rear Side

24
25

26
35 36
27 37

28
34
29
33

M191-01-052
32 31 30 T191-01-02-008

T1-2-10
 GENERAL / Component Layout

Seat Right-Front Side Seat Left-Rear Side

40

38

39

M191-01-037

T191-02-02-001

1 - Horn Switch 11 - Alternator Indicator 21 - Auto-Idle Switch 31 - Offset Limit Switch

2 - Hour Meter 12 - Preheat Indicator 22 - Wiper Switch 32 - System Failure Indicator
3 - E Mode Switch 13 - Air Filter Restriction Indi- 23 - Work Light Switch 33 - Monitor Selection Switch
cator
4 - Precise Swing Mode 14 - Battery Level Indicator 24 - Liquid Crystal Display 34 - Monitor Selection Indicator
Switch
5 - Auto-MARCCINO Mode 15 - Overheat Indicator 25 - Absolute/Relative Distance 35 - Zero-Point Set Switch
Switch Selector
6 - Radio 16 - Fuel Gauge 26 - Height Limit Indicator 36 - Cab Heater Control Panel
7 - Work Range Restriction 17 - Fuel Level Indicator 27 - Height Limit Switch 37 - Fuse Box
Cancel Switch
8 - Left Offset Switch 18 - Coolant Temperature 28 - Depth Limit Indicator 38 - Collision Prevention Sys-
Gauge tem Emergency Deactiva-
tion Switch
9 - Right Offset Switch 19 - Engine Oil Pressure Indi- 29 - Depth Limit Switch 39 - Engine Stop Handle
cator
10 - Key Switch 20 - Washer Switch (Optional) 30 - Offset Limit Indicator 40 - Emergency Redundant
Switch

T1-2-11
 GENERAL / Component Layout
EX75URLC-3

Left Console Right Console

1 7

8
9
10
11

14
2
12 15
16
3 17
13
4 18

19
5
20
6
T195-01-02-004
M192-01-001

Seat Rear Side

T191-01-02-008

21 22

1 - Hour Switch 7 - Key Switch 13 - Fuel Gauge 19 - Overheat Indicator

2 - Hour Meter 8 - Work Light Switch 14 - Engine Oil Pressure Indi- 20 - Battery Level Indicator
cator
3 - E Mode Switch 9 - Wiper Switch 15 - Alternator Indicator 21 - Cab Heater Control Panel
4 - Precise Swing Mode 10 - Auto-Idle Switch 16 - Fuel Level Indicator 22 - Huse Box
Switch
5 - Auxiliary Switch 11 - Washer Switch (Optional) 17 - Preheat Indicator
6 - Radio 12 - Coolant Temperature 18 - Air Filter Restriction Indi-
Gauge cator

T1-2-12
 GENERAL / Component Layout

Pump Device Swing Device

EX60-5 EX60-5
5 7
1 2

T152-01-02-003

T152-01-02-003

EX75UR-3, EX75URLC-3 EX75UR-3, EX75URLC-3

4 2

1 5

7
3

T192-01-02-005

T192-01-02-004

1 - Main Pump 3 - Pump Control Solenoid 5 - Make-Up Valve 7 - Swing Relief Valve
Valve
2 - Pilot Pump 4 - Main Pump 2 6 - Parking Brake Switch
Valve

T1-2-13
 GENERAL / Component Layout
Travel Device

9
T192-01-02-003

8 - Control Balance Valve 9 - Travel Relief Valve

T1-2-14
 GENERAL / Component Specifications
ENGINE

MAIN SPECIFICATION
Model................................................................................ BD30
Type ................................................................................. Diesel, 4 cycle, vertical, 4-cylinder, inline, water-cooled,
direct Injection type
Cyl. no.-bore × stroke....................................................... 4-96 mm×102 mm (3.78 in×4.02 in)
Piston displecement ......................................................... 2953 cm3 (180 in3)
Rated output..................................................................... 40.5 kW/2200 min-1 (55 PS/2200 rpm)
Compression ratio ............................................................ 18.5
Dry weight ........................................................................ 280 kg (617 lb)
Firing order ....................................................................... 1-3-4-2
Rotation direction ............................................................. Clockwise (view from fan side)

COOLING SYSTEM (EX60-5)

Cooling fan ....................................................................... Dia. 430 mm (17 in), F type 7 blades, draw-in type
Fan pully ratio................................................................... Engine rpm × 1.18
Thermostat ....................................................................... Cracking temp.: 82 °C (180 °F)
Full open temp.: 95 °C (203 °F)
Water pump...................................................................... Centrifugal type, belt driven

COOLING SYSTEM (EX75UR-3)

Cooling fan ....................................................................... Dia. 400 mm (16 in), 8 blades, draw-in type
Fan pully ratio................................................................... Engine rpm × 1.18
Thermostat ....................................................................... Cracking temp.: 82 °C (180 °F)
Full open temp.: 95 °C (203 °F)
Water pump...................................................................... Centrifugal type, belt driven

COOLING SYSTEM (EX75URLC-3)

Cooling fan ....................................................................... Dia. 430 mm (17 in), 8 blades, draw-in type
Fan pully ratio ................................................................... Engine rpm × 1.18
Thermostat ....................................................................... Cracking temp.: 82 °C (180 °F)
Full open temp.: 95 °C (203 °F)
Water pump ...................................................................... Centrifugal type, belt driven

LUBRICATION SYSTEM
Lubrication pump type ...................................................... Gear pump
Oil filter ............................................................................. Full-flow paper element type
Oil cooler .......................................................................... Water-cooled, built-in

STARTING SYSTEM
Motor ................................................................................ Magnetic pinion shift system, reduction type
Voltage · Output ............................................................... 24 V · 3.5 kW

PRE-HEAT SYSTEM
Heating method ................................................................ Air heater

ENGINE STOP SYSTEM

Stop method ..................................................................... Fuel cut

ALTERNATOR
Type.................................................................................. AC type (With IC regulator)
Voltage · Output ............................................................... 24 V · 25 A

T1-3-1
 GENERAL / Component Specifications

FUEL SYSTEM
Type ................................................................................. Bosch A type
Governor .......................................................................... Centrifugal all speed control RSV
Injection nozzle ............................................................... Multihole nozzle

PERFORMANCE (EX60-5)
Lubrication oil consumption ............................................. Less than 20 mL/hr(New engine, at rated horsepower)
Fuel consumption ratio..................................................... Less than 235 g/kW⋅h (173 g/PS·h)
Injection timing ................................................................. 16° before T.D.C.
Max. Output torque .......................................................... 181 N⋅m (18.5 kgf⋅m, 135 lbf·ft) or more at 1500 min-1
Injection pressure............................................................. 14.7 MPa (150 kgf/cm2, 2133 psi)
Cylinder compression ...................................................... 2.94 MPa (30 kgf/cm2, 427 psi) at 200 min-1
Valve clearance (inlet / exhaust)...................................... 0.4/0.4 mm (when cool)
No load speed ................................................................. Min.: 950 +500 min-1, Max.: 2350 +30-20 min-1

PERFORMANCE (EX75UR-3, EX75URLC-3)

Lubrication oil consumption ............................................. Less than 20 mL/hr(New engine, at rated horsepower)
Fuel consumption ratio..................................................... Less than 238 g/kW⋅h (175 g/PS·h)
Injection timing ................................................................. 16° before T.D.C.
Max. Output torque .......................................................... 193 N⋅m (19.7 kgf⋅m, 142 lbf·ft) or more at 1800 min-1
Injection pressure............................................................. 14.7 MPa (150 kgf/cm2, 2133 psi)
Cylinder compression ...................................................... 2.45 MPa (25 kgf/cm2, 356 psi) at 200 min-1
Valve clearance (inlet/exhaust)........................................ 0.4 / 0.4 mm (when cool)
No load speed ................................................................. Min.: 950 +500 min-1, Max.: 2150 +30-20 min-1

T1-3-2
 GENERAL / Component Specifications
Engine Performance Curve (BD3004)

Test conditions
1. In conformity with JIS D1005 (Performance test method foe diesel engines used for construction macynary),
under standard atmospheric pressure.
2. With fan and generator.

Torque

20
195
kW
PS
50
18
175
53 PS/2200 min-1 (rpm)
60

16
155
40
50

30 40 0 0
kgf·m N·m

Horse Power
Fuel
30 Consumption
173 g/PS·h (EX60-5 ) Ratio
20 175 g/PS·h
200 275
(EX75UR-3 , EX75UR-3 )

20

180 245
10
10

160 215

0 g/PS·h g/kW·h
1000 1200 1400 1600 1800 2000 2200 T190-01-05-001

Engine Speed min-1 (rpm)

T1-3-3
 GENERAL / Component Specifications
ENGINE ACCESSORIES
RADIATOR ASSEMBLY
Type ................................................................................. Radiator/Oil cooler tandem type assembly
Weight.............................................................................. 35 kg (77 lb)

Radiator Oil Cooler

Capacity ........................................................................... 3.8 L (1.0 US gal) 2.7 L (0.7 US gal)
Air-tight testing pressure .................................................. 68.6 kPa (0.7 kgf/cm2, 10 psi) −
Cap opening pressure...................................................... 49 kPa (0.5 kgf/cm2, 7 psi) −

BATTERY
Capacity ........................................................................... 52 Ah (5 hours), 65 Ah (20 hours)
Voltage............................................................................. 12 V
Weight.............................................................................. 17.5 kg (39 lb) × 2 (EX60-5)
17.7 kg (39 lb) × 2 (EX75UR-3, EX75URLC-3)

HYDRAULIC COMPONENT
MAIN PUMP (EX60-5)
Type.................................................................................. Swash plate type, variable displacement axal plunger
pump
Model................................................................................ AP2D36LV1RS6
Max. flow (Theoritical value)............................................. 79.2 L/min (20.9 US gpm)

MAIN PUMP1 (EX75UR-3, EX75URLC-3)

Type.................................................................................. Swash plate type, variable displacement axal plunger
pump
Model................................................................................ AP2D36LV1RS6-991
Max. flow (Theoritical value)............................................. 72 L/min (19 US gpm)

MAIN PUMP2 (EX75UR-3: for brade, EX75URLC-3: for precise swing)

Type.................................................................................. Fixed displacement gear pump
Model................................................................................ G2-C1S12T
Max. flow (Theoritical value)............................................. 24.2 L/min (6.4 US gpm)

GEAR PUMP (PILOT PUMP)

Type.................................................................................. Fixed displacement gear pump
Max. flow (Theoritical value)............................................. 23.5 L/min (6.2 US gpm)

CONTROL VALVE (EX60-5, EX75URLC-3)

Model................................................................................ KVMM-80
Type.................................................................................. Pilot pressure operated type (5-spool+4-spool)
Main relief pressure .......................................................... Front and swing: 26.0 MPa (265 kgf/cm2, 3770 psi) at
54 L/min
Travel: 31.4 MPa (320 kgf/cm2, 4550 psi) at 42 L/min
Overload relief pressure ................................................... 27.9 MPa (285 kgf/cm2, 4055 psi) at 20 L/min

CONTROL VALVE (EX75UR-3)

Model................................................................................ KVMM-80
Type.................................................................................. Pilot pressure operated type (5-spool+4-spool)
Main relief pressure .......................................................... Front and swing: 26.0 MPa (265 kgf/cm2, 3770 psi) at
54 L/min
Travel: 22.6 MPa (230 kgf/cm2, 3270 psi) at 48 L/min
Overload relief pressure ................................................... 27.9 MPa (285 kgf / cm2, 4055 psi) at 20 L/min

T1-3-4
 GENERAL / Component Specifications
CONTROL VALVE (for brade)(EX75UR-3)
Main relief pressure.......................................................... 22.6 MPa (230 kgf/cm2, 3270 psi) at 24 L/min
Overload relief pressure................................................... 27.9 MPa (285 kgf/cm2, 4055 psi) at 18 L/min

CONTROL VALVE (for precise swing)(EX75URLC-3)

Main relief pressure.......................................................... 21.6 MPa (220 kgf/cm2, 3130 psi) at 24 L/min
Overload relief pressure................................................... 24.5 MPa (250 kgf/cm2, 3560 psi) at 18 L/min

SWING DEVICE (EX60-5)

Type ................................................................................. Two-stage planetary reduction type
Reduction gear ratio......................................................... 14.236

SWING DEVICE (EX75UR-3, EX75URLC-3)

Type ................................................................................. Two-stage planetary reduction type
Reduction gear ratio......................................................... 13.8

SWING MOTOR (EX60-5)

Model................................................................................ MFB50
Type ................................................................................. Swash plate type, fixed-displacement plunger motor

SWING MOTOR (EX75UR-3, EX75URLC-3)

Model................................................................................ MFF52P
Type ................................................................................. Swash plate type, fixed-displacement

SWING BRAKE VALVE

Type ................................................................................. Non counter balance valve type
Relief pressure ................................................................. 25 MPa (255 kgf/cm2, 3625 psi) at 63 L/min

SWING PARKING BRAKE (EX60-5)

Type ................................................................................. Multiple-wet-plate negative type
Cracking pressure for release(full stroke)........................ 1.18± 0.15 MPa (12±1.5 kgf/cm2, 171±21 psi)

SWING PARKING BRAKE (EX75UR-3, EX75URLC-3)

Type ................................................................................. Multiple-wet-plate negative type
Cracking pressure for release(full stroke)........................ 1.5 MPa (15 kgf/cm2, 210 psi)

TRAVEL DEVICE (EX60-5, EX75URLC-3)

Type.................................................................................. Two-stage planetary reduction gear
Reduction gear ratio ......................................................... 32.0

TRAVEL DEVICE (EX75UR-3)

Type.................................................................................. Two-stage planetary reduction gear
Reduction gear ratio ......................................................... 32.5

TRAVEL MOTOR (EX60-5, EX75URLC-3)

Model................................................................................ HMF054AF
Type.................................................................................. Radial plunger motor

TRAVEL MOTOR (EX75UR-3)

Model................................................................................ HMF070CC
Type.................................................................................. Radial plunger motor

T1-3-5
 GENERAL / Component Specifications
TRAVEL BRAKE VALVE (EX60-5, EX75URLC-3)
Type................................................................................Counter balance type
Relief pressure ...............................................................31.9 MPa (325 kgf/cm2, 4620 psi)

TRAVEL BRAKE VALVE (EX75UR-3)

Type................................................................................Counter balance type
Relief pressure ...............................................................28.9 MPa (295 kgf/cm2, 4190 psi) at 40 L/min

TRAVEL PARKING BRAKE (EX60-5, EX75URLC-3)

Type................................................................................Multi-wet-palte negative type
Cracking pressure for release .......................................0.88 MPa (9.0 kgf/cm2, 128 psi)

TRAVEL PARKING BRAKE (EX75UR-3)

Type................................................................................Multi-wet-palte negative type
Cracking pressure for release .......................................0.78 MPa (8.0 kgf/cm2, 115 psi)

CYLINDER (EX60-5, EX75URLC-3) ...............................Boom Arm Bucket

Rod Dia...........................................................................65 mm(2.6 in) 60 mm(2.4 in) 55 mm(2.2 in)
Cylinder bore ..................................................................115 mm(4.5 in) 95 mm(3.7 in) 85 mm (3.3 in)
Stroke .............................................................................885 mm(34.8 in) 900 mm(35.4 in) 730 mm(27.8 in)
Fully retracted length ......................................................1311 mm (51.6 in) 1300 mm(51.2 in) 1120 mm(44.1 in)
Plating thickness.............................................................30 µm 30 µm 30 µm

CYLINDER (EX75UR-3) .................................................Boom Arm Bucket

Rod Dia...........................................................................70 mm(2.8 in) 65 mm(2.6 in) 55 mm(2.2 in)
Cylinder bore ..................................................................115 mm(4.5 in) 105 mm(4.1 in) 85 mm(3.3 in)
Stroke .............................................................................945 mm(37.2 in) 748 mm(29.4 in) 730 mm(27.8 in)
Fully retracted length ......................................................1370 mm(53.9 in) 1200 mm(47.2 in) 1120 mm(44.1 in)
Plating thickness.............................................................30 µm 30 µm 30 µm
Weight ............................................................................95 kg(210 lb) 85 kg(190 lb) 54 kg(120 lb)

Offset Blade
Rod Dia...........................................................................60 mm(2.4 in) 70 mm(2.8 in)
Cylinder bore ..................................................................105 mm(4.1 in) 120 mm(4.7 in)
Stroke .............................................................................350 mm(13.8 in) 145 mm(5.7 in)
Fully retracted length ......................................................725 mm(28.5 in) 568 mm(22.4 in)
Weight ............................................................................45 kg(99 lb) 46 kg(101 lb)

FRONT ATTACHMENT PILOT VALVE

Type................................................................................HVP04D-040-101

OFFSET PILOT VALVE (EX75UR-3)

Type................................................................................RCV8C1021

7-SPOOL SOLENOID VALVE (EX75UR-3)

Specified pressure..........................................................3.7 Mpa (38 kgf/cm3, 54 psi)

SHOKELESS VALVE
Type................................................................................Flow regulator

PILOT SHUT-OFF VALVE

Type................................................................................Rotary type

OIL COOLER BYPASS CHECK VALVE

Cracking pressure ..........................................................294 kPa (3.0 kgf/cm2, 43 psi) at 5 L/min

T1-3-6
 GENERAL / Component Specifications
ELECTRICAL COMPONENT

BATTERY RELAY
Voltage · Current............................................................24 V • 100 A

HEATER RELAY
Voltage ...........................................................................24 V

HORN
Specification ...................................................................24 V•1.5 A, 113 dB(A)

LIGHT
Specification ...................................................................Work light: Halogen 24V•70 W
Dome light: 24 V•10 W

HEATER
Type ............................................................................... WH20-R
Output ............................................................................ DC 24 V• 35W
Heating capacity............................................................. 8372 J/min (2000 kcal/min)
Air flow............................................................................ 2.5 m3/min

T1-3-7
 GENERAL / Component Specifications
(Blank)

T1-3-8