SK210LC

WT 47,000 lb
HP 148 @ 2,000 RPM
BKT CAP .63-1.80 cu yd

Dynamic Acera Hydraulic Excavator

PRODUCTIVITY

CAB & CONTROLS

Large, Comfortable Cab
We’ve expanded the cab by 18%—making it the largest in the industry—to give the operator lots of elbowroom while
ensuring that each and every control is ergonomically positioned for maximum convenience and unrivaled productivity.
Our design specialists also increased the total cab glass surface area by 36% to make the operator feel
more connected with the world outside. A 2-speaker, AM/FM stereo radio, with operator pre-set station
selections, is standard. Viscous silicon-filled cab mounts help eliminate the shocks and vibrations that
can fatigue an operator and degrade his productivity over a long shift.
The climate-control air conditioning system can effortlessly generate an impressive 18,250 BTUs
(1.52 tons) of cool air in the summer or 20,200 BTUs of heat in the winter. Any time of the year, the
operator’s desired temperature can be rapidly reached and maintained.

Adjustability = Productivity
The adjustable, 7-position suspension seat lets any operator get completely comfortable regardless of
size or shape. You can even move the seat forward or backward completely independent of the control
lever consoles. We also designed an adjustable height feature into our pilot control levers. By adjusting
the lever height to three different heights, the operator doesn’t have to feel uncomfortable no matter if
he is short, average or tall.

Our NeuralNet Command System Reacts to the Operator

One of the most impressive innovations we have designed into the Dynamic Acera line is our NeuralNet
Command System. Its “fuzzy logic” software works much like the technology that makes advanced
military aircraft ultra-responsive to a pilot’s every wish: analyzing a simple hand movement and translat-
ing it into a series of coordinated control messages. All of which makes command automatic, intuitive
and extremely efficient.

Assist Mode
This mode leverages the “fuzzy logic” of our revolutionary NeuralNet Command System, available only on Dynamic
Acera excavators. During operation, constant engine RPM is maintained under varying load conditions for outstanding
production efficiency. It recognizes various tasks and automatically responds, assisting the operator by adjusting
the machine’s response to the job’s conditions. By eliminating the need for an operator to manually select from 6-10
individual work mode options per task, the Assist Mode helps him concentrate on his job, instead of pushing buttons.
That leads to easier operation and more productivity — every task, every day.

A graphic display on the monitor

screen of the command module
OK displays system performance,
DIGGING LEVELING SCATTERING COMPACTING STANDBY confirming each work mode setting.
Manual Mode
This default mode maximizes output for the heavy operations that require the excavator’s full performance. It delivers the
highest possible level of production for truck loading, mass excavation or any task requiring continuous maximum speed
and power.

Breaker Mode
This new hydraulic setting lets operators quickly adjust the pump flow rates for various auxiliary attachments, like break-
ers and nibbler/breakers, right from the cab. When the breaker mode is set, the flow volume is automatically controlled
by whatever setting the operator chooses.

Intelligent Total Control System (ITCS)

Rapid responsiveness is designed into the SK210LC. Our ITCS software improves productivity while ensuring that every
part of this excavator feels like it is a natural extension of the operator: precise, productive and high performance.

2
 SK210LC

Auto-Acceleration System
This advanced system ever-so-smoothly eases engine RPMs from 1,000 RPM to full speed in direct, proportional response to the operator’s
control lever movements. The result: either a very deliberate acceleration for extremely precise operations, or an instant surge to full power.

Auto Warm-Up System

We installed an automatic warm-up system that cuts the time necessary for the engine and the hydraulic systems to reach their
optimum performance levels.

EXCEPTIONAL ENGINE

Rock-Solid Reliable, Mitsubishi Engine meets TIER 2 Emissions Standards

We’ve chosen the rock-solid, reliable Mitsubishi 6D34-TLED engine to power the Dynamic Acera SK210LC. The mighty
Mitsubishi power plant generates 148 net horsepower, which is the industry's highest rating in this class. Since each
Kobelco dealer also offers certified Mitsubishi support, you enjoy one-stop repair and maintenance convenience that
helps you minimize downtime and keep your excavators on the job even longer. It’s this kind of performance that can
give you a competitive advantage over the long run. Each Mitsubishi engine comes with a tremendous support program:

• The base engine warranty, which includes parts, labor, and mileage, covers defects in materials and workmanship
for 1 year/unlimited hours or 2 years/2,000 hours, whichever comes first.
• Standard, extended coverage for major components, 3 years/10,000 hours.
• Extended warranty protection can be purchased beyond the base warranty period in variable years and hours through
Kobelco’s Ultracare program.

SIMPLE SERVICING

Self-Diagnostic Capabilities and 60-Event Fault Code Memory

The best way to deal with problems is to avoid them, which is why we’ve built a self-diagnostic function into the computer system. It constantly
gathers and displays up to 68 different service items, to help ensure small problems don’t turn into big expenses. This even includes checking
hydraulic pressures conveniently from the operators cab.
We’ve eliminated the need to use tools, gauges or laptop computers to remotely retrieve data for recent system faults. Now up to 60 fault
codes, trouble locations and hours of each event are all accessible from the cab’s control console, reducing downtime and keeping your
excavator operating longer.

Friction-Inhibiting Bushings
Kobelco engineering has substantially increased both the durability and longevity of the SK210LC’s
boom foot, arm pivot and boom-hoist cylinders. Our design engineers came up with special, wear-resis-
tant brass bushings fortified with graphite inserts: a long-lasting solid lubricant that inhibits friction and,
along with your routine maintenance procedures, helps maximize the life of these critical components.

Easy-Maintenance Radiator
Now you can remove the radiator without having to drain the hydraulic system, thanks to a new design that makes the radiator and oil cooler
systems independent of each other. We’ve built in adequate space — about four inches — between the radiator and the oil cooler so it’s easy
to access either component for servicing. Or to just hose off any debris that has accumulated on the protective dust screen separating them.

3
PERFORMANCE

HYDRAULIC PERFORMANCE

The Industry’s Best Lift Capacity

Nothing in its class out lifts our SK210LC—front or side—and we can prove it. We’ve increased the SK210LC’s
stability, both over the front and over the side over the side making the SK210LC rock solid.
We even bolstered our upper revolving frame and undercarriage so they could handle bigger loads, thereby
increasing the machines overall weight. And should you need it, the Heavy Lift system can be switched on for an
increased capacity at close radius with no time limit. These increases give the SK210LC the ability to handle large
pipe, trench boxes or your most demanding jobs—without breaking a sweat.

The Industry’s Highest Breakout Forces

The SK210LC excavator boasts higher arm and bucket forces than comparably equipped competitor machines in the
weight class. Furthermore, the operator can boost power by another 10% simply by pressing the Power Boost button
on the right-hand control lever, unleashing the industry’s highest breakout forces. Unlike competitive systems, Dynamic
Acera excavators are designed to operate at their highest power levels for as long as you need them to. Bottom line:
we give you all the power you need for as long as you need it.

Swing Priority
This exclusive system automatically and instantly delivers full swing power during combined swing/arm operations—
with no special switches to select—making quick work of jobs like side digging and backfilling.

Unique Travel System

The SK210LC’s travel motors give you a choice of a high-speed setting—at 3.7 mph (6.0 km/h), the world’s fastest for this
class—or a high torque setting—2.5 mph (4.0 km/h) for close-quarters movement. The drawbar pull has been increased
to 44,700 lbs. (199 kN): the highest in its class. When the operator selects Independent Travel, one pump becomes
dedicated to travel, ensuring a smooth constant propel speed without deviation during simultaneous travel/attachment
operations. Delicate operations like carrying a large pipe across the job site become simple because in Independent
Travel the operator can focus on the pipe without having to worry about his travel speed being affected.

Boom and Arm Holding Valves

Operators often have to hold pipe or other heavy objects stationary while other crew members complete their work.
To make sure these heavy loads don’t budge, we’ve engineered our boom and arm holding valves to minimize attach-
ment drift.

Standard Auxiliary Valve with Flow Control

The functionality of the SK210LC has been enhanced to include a two-way auxiliary valve as standard, making it easy
to install piping and controls for auxiliary hydraulics. So, in a matter of hours, you’ll be ready to add on your attachments.
• Optional auxiliary rotation system using independent bi-directional low-flow provides for use of thumbs, twist buckets
and other devices in multi-functioning applications.
• Flow to the bi-directional valve is switchable from single or double flow from the operator’s cab.
Every excavator in the Dynamic Acera line features a standard auxiliary valve. The maximum flow available to the
auxiliary attachment can be pre-set from inside the cab, so operators are less likely to damage your excavator or attach-
ment through over-aggrssive use.

Standard
Auxiliary
Valve

4
 SPECS SK210LC
A
M

C
E
C
I F
L
K
G
H J
D B

DIMENSIONS Unit ft-in (m)

ARM LENGTH 9'8" (2.94) 11' 6" (3.50)
A Overall length 30' 10" (9.41) 31' 1" (9.47)
B Overall width (with 800 mm shoe) 10' 6" (3.19) 10' 6" (3.19)
C Overall height (to top of boom) 9' 7" (2.91) 10' 5" (3.17)
D Basic machine length 16' 3" (4.96) 16' 3" (4.96)
E Overall height (to top of cab)* 9' 7" (2.93) 9' 7" (2.93)
F Ground clearance of rear end* 3' 6" (1.06) 3' 6" (1.06)
G Center distance of tumblers 12' 0" (3.66) 12' 0" (3.66)
H Overall length of crawler 14' 7" (4.45) 14' 7" (4.45)
I Crawler height at tumbler center* 36.8" (935 mm) 36.8" (935 mm)
J Track gauge 7' 10" (2.39) 7' 10" (2.39)
K Width of crawler shoe 31.5" (800 mm) 31.5" (800 mm)
L Ground clearance of undercarriage* 17.7" (450 mm) 17.7" (450 mm)
M Tail swing radius 8' 11" (2.73) 9' 0" (2.73)

*Excludes height of grouser bar.

HYDRAULIC SYSTEM
Pump 2 variable displacement
WEIGHTS Bucket weight: 1,430 lbs (650 kg)
Max discharge flow 2 x 55 US gal/min (2 x 210 L/min)
Shoe width in (mm) 27.6" (700) 31.5" (800) 35.4" (900)
Operating pressure:
Machine overall width ft-in (mm) 10' 2" (3.090) 10' 6" (3.190) 10'10" (3.290)
Implement 4,980 psi (34.3 MPa)
Ground pressure psi (kg/cm2) 5.40 (0.38) 4.83 (0.34) 4.27 (0.30)
Travel 4,980 psi (34.3 MPa)
Operating weight lb (kg) 46,300 (21,000) 47,000 (21,315) 47,400 (21,500)
Swing 4,050 psi (27.9 MPa)
Power Boost/Heavy lift 5,470 psi (37.8 MPa)
Pilot control circuit 710 psi (4.9 MPa)
Control valves 6 spool
BUCKET SELECTION CHART
Bucket Duty Capacity (SAE) Width Bucket Arm ft-in (m)
Cubic Yard (m3) Inches (m) Weight lb (kg) 10' 6" (3.2) 11' 6" (3.5)
General Purpose .91 (.695) 30 (.762) 1,325 (601) H H
1.14 (.871) 36 (.914) 1,450 (658) H M
1.37 (1.047) 42 (1.066) 1,651 (749) M L
1.6 (1.223) 48 (1.219) 1,780 (807) L X
1.8 (1.38) 54 (1.371) 2,019 (916) L X H - Used with material
weight up to 3,000
Heavy Duty .68 (.519) 24 (.609) 1,250 (567) H H lbs/cu yd (1,780 kg/m3)
.91 (.695) 30 (.762) 1,420 (644) H M M - Used with material
weight up to 2,500
1.14 (.871) 36 (.914) 1,560 (708) M L lbs/cu yd (1,483 kg/m3)
L - Used with material
1.37 (1.04) 42 (1.066) 1,730 (785) L X
weight up to 2,000
1.6 (1.223) 48 (1.219) 1,905 (864) X X lbs/cu yd (1,186 kg/m3)
X - Not recommended
Severe Duty .63 (.481) 26 (.66) 1,455 (660) H H
.75 (.573) 31 (.787) 1,590 (721) H H
.88 (.672) 37 (.939) 1,790 (812) M M
1.13 (.871) 43 (1.092) 2,000 (907) L X
5
SPECS
A

A Reach swing centerline to bucket hook

B Bucket hook height above/below ground

C Lifting capacities in pounds and kilograms

• Max discharge pressure:

5,470 psi (385 kg/cm2)

C B • Track shoe: 31.5" (800 mm) Triple grouser

• Boom: 20'4" (6.2 m)

LIFTING CAPACITIES Shoe: 31.5" (800 mm) triple grouser

SK210LC Arm: 9' 8" (2.94 m) Bucket: 1.05 yd3 (.080 m3) SAE heaped Bucket Weight: 1,430 lb (650 kg)
A 5' (1.5 m) 10' (3.0 m) 15' (4.6 m) 20' (6.1 m) 25' (7.6 m)
Over Over Over Over Over Over Over Over Over Over
B Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 C
25' *7,370 *7,370 lb
(7.6 m) *3,340 3,340 kg
20' lb
(6.1 m) kg
15' *12,090 10,630 *9,580 7,210 lb
(4.6 m) *5,480 4,820 *4,340 3,270 kg
10' *27,130 *27,130 *17,710 15,960 *14,100 10,090 11,110 6,970 lb
(3.0 m) *12,300 *12,300 *8,030 7,240 *6,390 4,570 5,040 3,160 kg
5' *17,530 *17,530 *22,100 14,760 15,480 9,520 10,810 6,690 lb
(1.5 m) *7,950 *7,950 *10,020 6,690 7,020 4,320 4,900 3,030 kg
Ground *18,180 *18,180 24,140 *14,000 14,990 9,090 10,580 6,460 lb
Level *8,240 *8,240 10,950 *6,350 6,800 4,120 4,790 2,930 kg
-5' *15,470 *15,470 *25,200 *25,200 23,800 13,710 14,740 8,870 10,450 6,360 lb
(-1.5 m) *7,010 *7,010 *11,420 *11,420 10,790 6,210 6,680 4,020 4,740 2,880 kg
-10' *23,680 *23,680 *34,920 27,360 23,860 13,760 14,770 8,890 lb
(-3.0 m) *10,740 *10,740 *15,830 12,410 10,820 6,240 6,690 4,030 kg
-15' *28,080 *28,080 *19,720 14,150 lb
(-4.6 m) *12,730 *12,730 *8,940 6,420 kg

LIFTING CAPACITIES Shoe: 31.5" (800 mm) triple grouser

SK210LC Arm: 11' 6" (3.5 m) Bucket: 0.89 yd3 (.068 m3) SAE heaped Bucket Weight: 1,390 lb (630 kg)
A 5' (1.5 m) 10' (3.0 m) 15' (4.6 m) 20' (6.1 m) 25' (7.6 m)
Over Over Over Over Over Over Over Over Over Over
B Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 C
25' *6,480 *6,480 lb
(7.6 m) *2,940 *2,940 kg
20' *10,940 10,790 *9,610 7,300 lb
(6.1 m) *4,960 4,890 *4,360 3,310 kg
15' *15,910 *15,910 *13,040 10,200 11,170 7,010 lb
(4.6 m) *7,210 *7,210 *5,910 4,620 5,060 3,180 kg
10' *28,150 *28,150 *20,620 14,940 *15,390 9,570 10,820 6,690 lb
(3.0 m) *12,760 *12,760 *9,350 6,770 *6,980 4,340 4,900 3,030 kg
5' *8,720 *8,720 *21,280 *21,280 *23,960 14,000 14,970 9,070 10,520 6,410 lb
(1.5 m) *3,950 *3,950 *9,650 *9,650 *10,860 6,350 6,790 4,110 4,770 2,910 kg
Ground *15,190 *15,190 *25,630 *25,630 23,650 13,570 14,640 8,770 10,340 6,250 lb
Level *6,890 *6,890 *11,620 *11,620 10,720 6,150 6,640 3,970 4,690 2,830 kg
-5' *22,080 *22,080 *33,850 26,860 23,590 13,520 14,570 8,710 lb
(-1.5 m) *10,010 *10,010 *15,350 12,180 10,700 6,130 6,610 3,950 kg
-10' *30,390 *30,390 *30,930 27,480 *21,350 13,790 14,830 8,930 lb
(-3.0 m) *13,780 *13,780 *14,020 12,460 *9,680 6,250 6,720 4,050 kg
-15' lb
(-4.6 m) kg
Notes:
1. Do not attempt to lift or hold any load that exceeds these rated values at their specified load radii and heights. Weight of all accessories must be deducted from the above lifting capacities.
2. Lifting capacities assume a machine standing on a level, firm, and uniform supporting surface. Operator must make allowance for job conditions such as soft or uneven ground, out of level
conditions, side loads, sudden stopping of loads, hazardous conditions, inexperienced personnel, weight of various other buckets, lifting slings, attachments, etc.
3. Ratings at bucket lift hook.
4. The above rated loads are in compliance with SAE Hydraulic Excavator Lift Capacity Standard J 1097. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Rated
loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Manuals before operating this machine. Rules for safe operation of equipment should be followed at all times.
6. Capacities apply only to the machine as originally manufactured and normally equipped by KOBELCO Construction Machinery America LLC.

6
 SK210LC
WORKING RANGES Unit: ft-in (m)
Standard Arm Optional Arm
ATTACHMENTS
9' 8" (2.94) 11' 6" (3.5)
A Max digging reach 32' 6" (9.90) 33' 10" (10.30)
A1 Max digging reach at ground level 32' 0" (9.75) 33' 4" (10.15)
B Max digging depth 22' 0" (6.70) 23' 10" (7.26)
C Max digging height 31' 6" (9.60) 31' 3" (9.52)
D Max dumping clearance 22' 3" (6.79) 22' 2" (6.76)
E Min dumping clearance 7' 8" (2.33) 5' 10" (1.77)
F Max vertical wall digging depth 19' 10" (6.04) 20' 9" (6.33)
G Min front swing radius 11' 8" (3.56) 11' 8" (3.56)
H Height at min swing radius 24' 9" (7.54) 24' 11" (7.59)
I Digging depth for 8' (2.4 m) flat bottom 21' 5" (6.53) 23' 3" (7.08)

DIGGING FORCE Unit: lb (kg)

9' 8" (2.94 m) Arm 11' 6" (3.5 m) Arm
SAE ISO SAE ISO
Bucket digging force *31,700 (*14,379) 35,398 (*16,056) 28,800 (13,063) 32,160 (14,587)
Arm crowding force *23,200 (*10,523) 24,000 (10,886) 19,300 (8,754) 19,960 (9,053)
*Power boost engaged.
This chart is a graphic representation of the working ranges for
the SK210LC equipped with a 9'8" (2.94 m) arm.

REFILLING CAPACITIES Unit: US gal (liters)

PERFORMANCE Fuel tank 89.8 (340)
Travel speed 3.7/2.5 mph (6.0/4.0 km/h)
Hydraulic oil reservoir 41.2 (156)
Swing speed 11 rpm
Hydraulic system including oil reservoir 65 (246)
Gradeability 35˚ (70%)
Cooling system 5 (19)
Drawbar pulling force 44,700 lbs (199 kN)
Lubrication: Engine oil 6.3 (24)

SPECIFICATION SUMMARY
GENERAL Travel-psi (MPa) 4,980 (34.3)
Operating weight with Bucket lb (kg) 47,000 (21,300) Swing-psi (MPa) 4,050 (27.9)
Bucket Capacity Range cu yd (m3) .63~1.8 (.48~1.4) Heavy Lift-psi (MPa) 5,470 (37.8)
ENGINE UNDERCARRIAGE
Make and Model Mitsubishi 6D34-TLED Track Overall Length ft-in (m) 14' 7" (4.45)
Displacement cu in (L) 358 (5.861) Track Overall Width w/Std. Shoe ft-in (m) 10' 6" (3.19)
Bore and Stroke in (mm) 4.09" x 4.53" (104 x 115) Track Shoe Selection in (mm) 31.5" (800)
Horsepower SAE NET HP/RPM (KW/RPM)) 148@2,000 (110@2,000) Travel Speed mph (km/h) 3.7/2.5 (6.0/4.0)
WORKING RANGES (Std. Arm) Draw Bar Pull lbs (kN) 44,700 (199)
Standard Arm ft-in (m) 9' 8" (2.94) Ground Bearing Pressure psi (kg/cm2) 4.83 (0.34)
Bucket Digging Force lb (kg) 31,700 (14,379) Ground Clearance in (mm) 17.7" (450)
Arm Digging Force lb (kg) 23,200 (10,523) SWING
Ground Level Reach ft-in (m) 32' 0" (9.75) Swing Speed rpm 11
Digging Depth ft-in (m) 22' 0" (6.70) Tail Swing Radius ft-in (m) 9' 0" (2.73)
Dumping Height ft-in (m) 22' 3" (6.79) Swing Torque lb-ft (kN • m) 48,077 (65.2)
Vertical Wall Digging Depth ft-in (m) 19' 10" (6.04) SHIPPING DIMENSIONS
Max. Lift Capacity-Side lb (kg) 9,090 (4,120) Height ft-in (m) 9' 7" (2.93)
@ 20’ Radius & Ground Level-Front lb (kg) 14,990 (6,800) Width w/Std. Shoe ft-in (m) 10' 6" (3.19)
HYDRAULIC SYSTEM Length ft-in (m) 30' 10" (9.41)
Hydraulic Pump No & type 2VP+1FG REFILL CAPACITIES
Rated Oil Flow gpm (L/m) 2 x 55.5 (2 x 210) Fuel Tank gal (L) 89.8 (340)
Operating Pressure Implement-psi (MPa) 4,980 (34.3) Hydraulic Reservoir gal (L) 41.2 (156)

7
 STANDARD EQUIPMENT
• AM/FM radio • Self-lubricating bushings in boom foot and boom hoist cylinders
• Arm: 9' 8" (2.94 m) with vertical ribbed rock guard, tapped blocks, • Service diagnostics:
breaker ready Computer system displays 68 service items 60 event fault code
• Audible warning system for high coolant temperature, low engine memory, accessible from cab
oil pressure, clogged air filter and oil replacement interval • Starting motor (24 v/5.0 KW) 35 amp alternator
• Auxiliary valve with flow control • Straight travel system
• Boom, 18' 6" (5.65 m) • Suspension seat — 7-way adjustable with safety belt
• Boom and arm holding (anti-drift) valves • Swing and travel automatic parking brakes
• Cab is die formed, modular steel full-vision, sound insulated, • Swing flashers recessed into counterweight. Off/on switch
with viscous silicon-filled mounts, windshield wiper, heater and located on multi-function console in cab
defroster, cigarette lighter, ashtray, floor mat, cab light, control • Swing priority (trenching system) functions automatically
lever lock, tinted skylight with damper cylinder • Swing shockless valve
• Climate control air conditioning/heating system • Track shoes: 31.5" (800 mm) semi-triple grouser shoes
• Display monitor mounted on multi-function console provides • Travel—two speed with automatic shift
status of following: aging of engine oil, fuel and hydraulic filters, • Two lever control for boom, arm, bucket and swing; pilot
system status, engine preheat, low engine oil pressure, engine operated wrist controls and foot pedals
coolant temperature, air cleaner restriction, battery charging, • Warm up function of engine and hydraulic system functions
fuel level, CPU error and tachometer. Beneath monitor are automatically
switches for auto-decel, windshield washer and wiper, mode • Work lights —three front and two rear
selector, one/two pump auxiliary hydraulics and swing flashers
• Double pump flow for bucket in
• Dual element air cleaner OPTIONAL EQUIPMENT
• Electric horn
• Emergency electronic bypass • Arm: 11' 6" (3.5 m) with rock guard
• Engine shuts down automatically for low oil pressure • Belly pan guard
• Heavy duty batteries (2 x12 volt 136 AH) • Boom and arm load (lock) valves
• Heavy Lift and Power Boost • Combined one-way or two-way auxiliary hydraulic piping
• Hydraulic track adjusters (one or two pump) with hand or foot controls.
• Independent travel • Control pattern changer (ISO/BHL)
• Lifetime lubricated track rollers, idlers and sprockets • Front rain visor
• Mitsubishi engine, model 6D34-TLED • High & wide lower
• Mode selection: • Independent low-flow rotation system
Manual Mode — full performance, default mode • Large selection of buckets
Assist Mode — simplified and useful economy mode • Long reach (50’) with heavier counterweight
Breaker Mode — Electronic breaker flow control • Track shoe: 27.6" (700 mm) double bar
• Power outlet, 24 volt to 12 volt converter • Track shoe: 35.4" (900 mm) triple bar grouser
• Proportional auto accel system • Vandalism guards
• Removable clean out screen for radiator
• Removable travel levers with toe tabs

NOTE: Due to our policy of continual product improve-

ment, all designs and specifications are subject to
change without advance notice.

Kobelco Construction Machinery America LLC

245 E. North Avenue
Carol Stream, IL 60188-2021
866-726-3396 Toll Free
630-260-4000

SK210LC
630-260-4304 Fax
E-mail: [email protected]
Website: www.kobelcoamerica.com

© 2002 Kobelco Construction Machinery America LLC Bulletin No. SK210LC-US-12/02-10M-SAM-104