SERVICE MANUAL

COLOUR TELEVISION
Chassis No. GA-7S

MODE L S 21AXS500
In the interes ts of us er-s afety (R equired by s afety regulations in s ome countries ) the s et s hould be res tored
to its origina l condition a nd only pa rts identica l to thos e s pecified s hould be us ed.

FEATURES
¨ Multi 21 Systems, 100-CH program Memory ¨ Blueback Function with Auto OFF
¨ Full Auto Search System ¨ OFF Timer & Child Lock
¨ NICAM/A2 STEREO ¨ Hotel Mode & AV Mode (Movie/Music/News)
¨ CATV (Hyperband) Ready ¨ SURROUND & AVL Function
¨ NTSC Colour Comb Filter Function ¨ Rear AV-IN/Out Terminal & Component In
¨ High Contrast Picture (Black Strecth Circuit) ¨ Front AV-In Terminal & Sub-Woofer Output
¨ White Temperature Select ¨ Sound Booter (Shakit)
¨ English Language OSD ¨ LNASI (Antenna Booter)

CONTENTS
Page Page
¨SPECIFICATIONS ............................................. 2 ¨MAIN UNIT ................................................... 24
¨IMPORTANT SERVICE NOTES ........................ 2 ¨REPLACEMENT PARTS LIST
¨ADJUSTMENT PRECAUTIONS ........................ 3 ¨ELECTRICAL PARTS .................................. 26
¨TROUBLE SHOOTING TABLE ....................... 14 ¨MISCELLANECOUS PARTS ....................... 30
¨WAVEFORMS .................................................. 16 ¨SUPPLIED ACCESSORIES......................... 30
¨SOLID STATE DEVICE BASE DIAGRAM ....... 17 ¨PACKING PARTS ......................................... 30
¨CHASSIS LAYOUT .......................................... 18 ¨CABINET PARTS ......................................... 30
¨BLOCK DIAGRAM ........................................... 19
¨DESCRIPTION OF SCHEMATIC DIAGRAM .. 22
¨SCHEMATIC DIAGRAM
¨CRT UNIT ..................................................... 23

WA R NING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug and power
receptacle, when servicing this chassis. To prevent electric shock, do not remove cover. No user - serviceable parts
inside. Refer servicing to qualified service personnel.

S HA R P C OR1 P OR A T ION
 SPECIFICATIONS
IMPORTANT SERVICE NOTES
Convergence ................................................................................................................ Self Convergence System
Focus ....................................................................................................................... Electro-Static Focusing
Sweep Deflection .........................................................................................................................................
Magnetic
Maintenance and repair of this receiver should be done by qualified
service personnel only.
Intermediate Frequencies
Picture IF Carrier ................................................................................................................................. 38.9MHz SERVICE OF HIGH VOLTAGE SYSTEM AND PIC-
Sound IF Carrier Frequency
6.5MHz ............................................................................................................................................. 32.4MHz TURE TUBE
6.0MHz ............................................................................................................................................. 32.9MHz
5.5MHz ............................................................................................................................................. 33.4MHz When servicing the high voltage system, remove static charge from it by
Colour Sub-Carrier Frequency ........................................................................................................... 34.47MHz Connecting a 10K ohm Resistor in series with an insulated wire(such as a
test probe) between picture tube dag and 2nd anode lead. (AC line cord
Power Input ..................................................................................................................... 110 ~ 240V AC 50/60 Hz should be disconnected from AC outlet.)
Power Consumption ...................................................................................................................................... 107W 1. Picture tube in this receiver employs integral implosion protection.
Audio Power Output Rating ............................................................................................................. 7.5W(rms) x 2
2. Replace with tube of the same type number for continued safety .
3. Do not lift picture tube by the neck.
Speaker
Size .............................................................................................................................................10cm+5cm(x2)
4. Handle the picture tube only when wearing shatterproof goggles and after discharging
the high voltage completely.
Voice Coil Impedance .............................................................................................................16 ohms at 400 Hz

X-RAY
Aerial Input Impedance This receiver is designed so that any X-Ray radiation is kept to an absolute
VHF/UHF .......................................................................................................................... 75 ohms Unbalanced
Receiving System ................................................................................... PAL I, B/G, D/K & SECAM B/G, D/K, K1,
Minimum. Since certain malfunctions or servicing may produce potentially
& NTSC M hazardous radiation with prolonged exposure at close range, the following
Receiving Channel precautions should be observed:

2
VHF-Channels ......................................................................................... E2(48.25MHz) thru E12(224.25MHz)
C1(49.75MHz) thru C12(216.25 MHz) 1. When repairing the circuit, be sure not to increase the high voltage to more than 26.0kV
.S1(105.25MHz) thru S41(463.25HMz) (at beam 0 m A) for the set.
UHF-Channels ..................................................................................... E21(471.25MHz) thru E69(855.25MHz) 2. To keep the set in a normal operation , be sure to make it function on 23.0kV ±1.0kV (at
C13(471.25MHz) thru C57(863.25MHz) beam 1000 m A) in the case of the set. The set has been factory - Adjusted to the above-
mentioned high voltage.
\ If there is a possibility that the high voltage fluctuates as a result of the repairs,
Dimensions ..................................................................................................................................... Width: 734mm
never forget to check for such high voltage after the work.
Height: 419.5mm
Depth: 353.8mm 3. Do not substitute a picture tube with unauthorizerd types and/or brands which may
Weight(approx): 22.5 kg cause excess X-ray radiation.

Cabinet material ..................................................................................................................................... All Plastics BEFORE RETURNING THE RECEIVER

Before returning the receiver to the user, perform the following safety Checks.
1. Inspect all lead dress to make certain that leads are not pinched or that hardware is not
Specifications are subject to change without prior notice lodged between the chassis and other metal parts in the receiver .
2. Inspect all protective devices such as non-metallic control knobs, insulating fishpapers,
cabinet backs, adjustment and compartment covers or shields, isolation resistor- ca-
pacity networks, mechanical insulators etc.

2-1 2-2
 ADJUSTMENT PRECAUTIONS ADJUSTMENT ITEM

***B elow are the adjus tment items that s hould be done, P L S F OL L OW T HE P R OC E DUR E .
T his model's s etting are adjus ted in two different ways : through the I2C bus control and in the
conventional analog manner. T he adjus tments via the I2C bus control include pres et-only items and Otherwis e s ome adjus tment items will not be accurate.
variable data.
NO *** ADJ US T ME NT IT E M E F F E C T IVE MODE L R E VIS ION
1. S etting the s ervice mode by the microproces s or. 1 B US S E T UP
2 R F -AG C
(1). P res s and hold the local key "V O L DO W N" & "C H UP " when power on the main s witch, 3 F OC US ADJ
T V will enter into the S E R V IC E MO DE in Adjus tment Mode.(T he initial value of E E P R OM
4 V-S LOP E
are automatically pres et when new E E P R OM is us ed).
5 V-S HIF T 50
S ervice Mode als o can be reached by pres s ing "S ervice" key (code: 81 Hex)
6 V-AMP -50
(2). P res s the C H DO W N / UP key on the remote controller to s elect the items 7 H-S HIF T-50
one by one in Adjus tment Mode. 8 E W-W-50
9 E /W-PAR -50
(3). Us ing the V O LUME UP / DOW N key on the remote controller, the data can be modified. 10 UP C OR -PAR
11 LOC OR -PAR
(4). W hen pres s the local key "V OL DOW N" & "C H UP " at the s ame time, 12 H-B OW
it will be releas ed from the s ervice mode.
13 H-PAR
(5) P res s the ME NU key on the remote controller to enter into NV M mode. 14 E W-T R AP
P res s ME NU key again to leave the NV M mode return to Adjus tment Mode. 15 SCREEN
( Not recommended to modify the data unles s as lis ted in B US S E T UP data) 16 WHIT E B ALANC E
17 S UB -B R IG HT NE S S
(6) P res s both C H-UP and V O L-DO W N buttons on the T V s et s imutaneous ly or pres s 18 S UB -C ONT R AS T
the "S E R V IC E " (81HE X ) key again, it will s witch to the NO R MAL mode pos ition, and 19 B E AM C UR R E NT C HE C K
the microproces s or is out of the S E R V IC E mode. 20 S UB -C OLOR
21 S UB -T INT
2. F actory P res etting.
22 HV P R OT E C TOR C HE C K
(1). P res s remote controller key of code "E D"for 4 s econds , the initial values are 23 OT HE R P R OT E C TOR C HE C K ALL MODE LS
automatically pres et. 24 AV OUT C HE C K

3
25 AV IN C HE C K
(2). T he initial data are pres et as lis ted in page 5~8. 26 C OMP ONE NT IN C HE C K
27 C ONT R AS T C ONT R OL C HE C K
(3). Make s ure whether the data need to modify or not (Initial data). 28 C OLOR C ONT R OL C HE C K
( R efer to B US S E T UP DAT A) 29 B R IG HT NE S S C ONT R OL C HE C K
30 T INT C ONT R OL C HE C K
Note: O nce the chas s is has been as s embly together and in ready condition, pleas e make
s ure it's go through initialize proces s (s ee s ect 2 above) 31 S HAR P NE S S C ONT R OL C HE C K
32 C H DIS P LAY C OLOR C HE C K
33 S UR R OUND C HE C K
P rec aution: If haven't done this initialization, malfunction might be happen. 34 T R E B LE C HE C K
35 B AS S C HE C K
36 B ALANC E C HE C K
37 LOUDNE S S C HE C K
38 NOR MAL DIS P LAY C HE C K
39 WHIT E T E MP C ONT R OL C HE C K
40 C OLOR S Y S T E M C HE C K
41 S OUND S Y S T E M C HE C K
42 MP -IN C HE C K
43 NOIS E MUT E C HE C K
44 OS D LANG UAG E QUANT IT Y C HE C K
45 S HOC K T E S T C HE C K

3-1 3-2
 **AFTER INITIALIZED THE EEPROM (REFER TO FACTORY PRESETTING), READ DATA FROM
USER DATA IN SERVICE MODE EEPROM ADDRESS 00H ~ 03H,AND COMPARE TO THE LIST BELOW, IF DIFFERENT,
INITIALIZE THE EEPROM.

* While SERVICE mode ON, EEPROM DATA will switch to the service data.
ADDRESS DATA ADDRESS DATA
TA.
Also, once SERVICE mode OFF, EEPROM will also switch to service (default) data. 00H: 00H 02H: 03H
01H: 00H 03H: 13H

* In the service mode, the user data establish as below.

*** There are two stages of service mode. First stage is ADJUSTMENT MODE; data from 01~36.
To go into second stage of service mode , press MENU [Link] stage is NVM MODE data from 000~3FF
*1: For each CH, data is same as before switch to Service Mode.
ADJUSTMENT MODE (01~36)
1) Press CH UP/CH DOWN to select the item.
The flow of Mode lists as following.
1) Press VOL UP/VOL DOWN to modify/ adjust the data.
USER DATA
CONTRAST MAX (60)
COLOUR CENT (0) Item
BRIGHTNESS CENT (0) Setting Item Setting R ange IC Default (DEC) FI X/ADJ/ AUT O REM ARK
TINT CENT (0)
SHARPNESS CENT (0)
01 RF- AG C 0…63 UO C- T V 23 AUTO
WHITE TEMP CENTER 02 V- SLOP E 0…63 UO C- T V 31 ADJ
ANTENA BOOSTER OFF 03 V- SHI -50 0…63 UO C- T V 36 ADJ
S-VOLUME MIN 04 V- AMP- 50 0…63 UO C- T V 20 ADJ
SURROUND OFF 05 H-SHI -50 0…63 UO C- T V 30 ADJ PLS REFER TO ADJ
TREBLE +2 06 EW -W -50 0…63 UO C- T V 28 ADJ ITEM FOR
BASS +2 07 E/ W -PAR- 50 0…63 UO C- T V 36 ADJ HORIZONTAL,
BALANCE CENT (0)

4
08 H-PAR 0…63 UO C- T V 30 ADJ VERTICAL,
SOUND BOOSTER ON 09 H-BO W 0…63 UO C- T V 30 ADJ DEFLECTION LOOP
AVL ON 10 UPCOR- PAR 0…63 UO C- T V 42 ADJ
BLUE BACK OFF 11 LOCOR- PAR 0…63 UO C- T V 44 ADJ
C SYSTEM AUTO 12 E/ W T RAP 0…63 UO C- T V 30 ADJ
S SYSTEM *1 13 V- LI N 0…63 UO C- T V 32 FI X
14 S- COR 0…63 UO C- T V 32 FI X
* Direct Key-in Mode for Service Items in 15 DRI -RS 0…63 UO C- T V 32 ADJ
16 DRI -GS 0…63 UO C- T V 32 ADJ
Service Mode 17 DRI -BS 0…63 UO C- T V 32 ADJ
PLS R EFER T O ADJ
18 CUT -RS 0…63 UO C- T V 16 ADJ
ITE M F OR W HITE
RC (HEX) SERVICE-ITEM 19 CUT -GS 0…63 UO C- T V 16 ADJ
BALANCE
24 V-AMP-50 / V-AMP-60 20 CUT -BS 0…63 UO C- T V 16 ADJ
54 V-SHI-50 / V-SHI-60 21 SUB- BRI 0…63 UO C- T V 24 ADJ
22 SUB- CON 0…63 UO C- T V 59 ADJ
D4 V-SLOPE
23 SUB- COL 0…63 UO C- T V 10 ADJ
74 H-SHI-50 / H-SHI-60 24 SUB- T INT 0…63 UO C- T V 36 ADJ
BC EW-W-50 / EW-W-60 25 SUB- SHARP 0…63 UOC -T V 32 F IX BUS S ET UP
0C H-PAR 26 V- SHI -60 0…63 UO C- T V 31 FI X
64 V-LIN 27 V- AMP- 60 0…63 UO C- T V 31 FI X
E2 CUT-RS 28 H-SHI -60 0…63 UO C- T V 38 FI X
29 EW-W-60 0…63 UO C- T V 32 FI X
D6 SUB COLOR
30 E/ W -PAR- 60 0…63 UOC -T V 31 F IX
36 SUB-TINT 31 VSD 0/1 UOC -T V 0 FI X
1E VSD 32 CUT OFF 0…63 UO C- T V 25 FI X
0D SUB-BRI 33 DCXO 0…3 UOC -T V 2 FI X
34 IS P MODE 0/1 UOC -T V 0 FI X
35 BLOC 0…15 UO C- T V 4 F IX
36 SUB-VOL 0…60 UO C- T V 60 FI X

4-1 4-2
 NVM MODE ITEM (5/5) NVM MODE ITEM (5/5)
REMARK REMARK
ADDRESS DATA MICON EEPROM ADDRESS DATA MICON EEPROM
DEFAULT(hex) RANGE(hex) (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT(hex) RANGE(hex)
(HEX) D7 D6 D5 D4 D3 D2 D1 D0
TUNER 0001
00CD TUNER_SELECTION 21 00-83 FIX LOCKING PASSWORD 0000 0000-270F FIX
BAND 0001
00CF 0002 PACKAGE NUMBER (MSB) 03 00-FF FIX
00D0 0003 PACKAGE NUMBER (LSB) 13 00-FF FIX
00D1 0008 RF-AGC (01) 17 00-3F AUTO
00D2 YD SECAM YD PAL 21 00-FF FIX 0009 V-SLOPE (02) 1F 00-3F ADJ
00D3 YD N443 YD N358 11 00-FF FIX 000A V-SHI-50 (03) 24 00-3F ADJ
00D4 YD AV-SECAM YD AV-PAL 40 00-FF FIX 000B V-AMP-50 (04) 14 00-3F ADJ
00D5 YD AV_N443 YD AV_N358 00 00-FF FIX 000C H-SHI-50 (05) 1E 00-3F ADJ
00D6 CL3-0 YD COMP 67 00-FF FIX 000D EW-W-50 (06) 1C 00-3F ADJ
00D7 PW-TIME SVM2-0-PAL 35 00-37 FIX 000E EW-PAR-50 (07) 24 00-3F ADJ
00D8 WBR-50-C-F-P WBF-50-C-F-P 66 00-FF FIX 000F H-PAR (08) 1E 00-3F ADJ
00D9 WBR-60-C-F-P WBF-60-C-F-P 84 00-FF FIX 0010 H-BOW (09) 1E 00-3F ADJ
0011 UPCOR-PAR (10) 2A 00-3F ADJ
00DA BLOC (35) LOUDNESS-LDS0-2 41 00-F7 FIX
0012 LOCOR-PAR (11) 2C 00-3F ADJ
00DB FTUN_OFFSDEM IF PWLDSC 04 00-0F FIX
0013 E/W-TRAP (12) 1E 00-3F ADJ
00DC WBR-60-C-F-P (during Blue Black) WBF-50-C-F-P (during Blue Black) 0B 00-FF FIX
0014 V-LIN (13) 20 00-3F FIX
00DD LOUDNESS_LD2 (SHAKIT only) LOUDNESS_LD1 (SHAKIT only) 45 00-77 FIX
0015 S-COR (14) 20 00-3F FIX
00DE LOUDNESS_LD4 (SHAKIT only) LOUDNESS_LD3 (SHAKIT only) 13 00-77 FIX
0016 DRI-RS (15) 20 00-3F ADJ
00DE WHITE TEMP (MUSIC) FZOM_ZOOM_MODE 16 26 FIX
0017 DRI-GS (16) 20 00-3F FIX
00E0 WHITE TEMP (MOVIE) LANGUAGE 10 22 FIX 0018 DRI-BS (17) 20 00-3F ADJ
0019 CUT-RS (18) 10 00-3F ADJ
00E1 WHITE TEMP (NEWS) 01 02 FIX 10
001A CUT-GS (19) 00-3F ADJ
00E2 001B SUB-BRI (21) 18 00-3F ADJ
00E3 001C SUB-CON (22) 3B 00-3F ADJ
00E4 001D SUB-COL (23) 0A 00-3F ADJ
00E5 001E SUB-TINT (24) 24 00-3F ADJ
00E6 PEAKFREQPALN PEAKFREQPALM PEAKFREQPAL443 COR1_0 04 00-FF FIX 001F SUB-SHARP (25) 20 00-3F BUS SETUP
00E7 PEAKFREQDVD PEAKFREQSECAM PEAKFREQNTSCM PEAKFREQNTSC443 D1 00-FF FIX 0020 DRI-RS-DVD 21 00-3F FIX
00E8 PW-LAST AUDIO_CFG PHI H-POS-FINE 5D 00-AF FIX 0021 DRI-GS-DVD 20 00-3F FIX
00E9 PRESET_WS_NEWS PRESET_COR_NEWS PRESET_WS_MUSC PRESET_COR_MUSC 77 00-FF FIX 0022 DRI-BS-DVD 21 00-3F FIX

5
00EA PRESET_WS_CTM PRESET_COR_CTM PRESET_WS_MOV PRESET_COR_MOV 77 00-FF FIX 0023 CUT-RS-DVD 21 00-3F FIX
00EB PRESET_SURRAUND_NEWS PRESET_SURROUND_MUSIC TREBLE_FREQ_SELECTION BASS_FREQ_SELECTION 02 00-AF FIX 0024 CUT-GS-DVD 29 00-3F FIX
00EC PRESET_SOUROUD_MOV 00-BE 0025 SUB-BRI-DVD 1C 00-3F FIX
RPA SOC ASS0_1 90 FIX
PSYS_CHSE_COLOR FSND_AGNE_SELECTION
0026 SUB-CON-DVD 1F 00-3F FIX
00ED LANGUAGE_OPTION RPO 04 00-1F FIX
0027 SUB-TINT-DVD 1A 00-3F BUS SETUP
AVL Normal default OPTION_SHAKIT
00EE DSGLS option 50 00-52 BUS SETUP 0028 DRI-RC 1F 00-3F FIX
setting option LOUDNESS_DSP
0029 DRI-GC 20 00-3F FIX
00EF SURROUND(NEWS) SURROUND(MUSIC) DIGIT ENTRY MODE DIGIT ENTRY MODE 04 A6 FIX
002A DRI-BC 28 00-3F FIX
00F0 AIR / CABLE SURROUND(MOVIE) 00 02 FIX
002B CUT-RC 20 00-3F FIX
00F1 002C CUT-GC 20 00-3F FIX
00F2 002D DRI-RW 22 00-3F FIX
00F3 002E DRI-GW 20 00-3F FIX
00F4 DSK_NOT 002F DRI-BW 1D 00-3F FIX
PWL VSD(31) VIRGIN BPB2 FMI MUS PHI FORCE PAL_AV 92 00-FF FIX
LCKEY_SRV
0030 CUT-RW 20 00-3F FIX
00F5 DSK-NOT- DSK-PAL DSK_PAL_AV INCL_AV
BKS GAM BSD ENTER
1B 00-FF FIX FIX
PAL-DVD DVD 0031 CUT-GW 20 00-3F
ISP-MODE AEVS-ITEM EER- 0032 DRI-RC-DVD 1F 00-3F FIX
AVL_GAIN AVL EER_VERTG ERR_XRAY EER-1-8-SUP 0C 00-BF FIX
00F6 (34) POR SUPVOL
0033 DRI-GC-DVD 20 00-3F FIX
00F7 OPTION_ OPTION LOUDNESS
TFR HIGH_BOOST DTR AGN DSG 49 00-7D FIX 0034 DRI-BC-DVD 28 00-3F FIX
SMUTE_L CP-TUNER HOTEL
00F8 OPTION OPTION- MULTI21_SYS DMP50_ DSGLS_SEL 0035 CUT-RC-DVD 20 00-3F FIX
OPTION_AV2 CB CBS E4 00-F5 BUS SETUP
SUROUND DVD OPTION SELECTION TION 0036 CUT-GC-DVD 20 00-3F FIX
OPTION OPTION_TREBLE OPTION_AVL
00F9 OPTION OPTION_LNA OPTION OPTION
_ON_VOL 45 00-7F BUS SETUP 0037 DRI-RW-DVD 22 00-3F FIX
AVL_OSD _LIMIT BASS_LIMIT _TBL _BOOSTER SHAKIT _MPIN
LAST 0038 DRI-GW-DVD 20 00-3F FIX
00FA AUTO_ PICTURE_NR
[Link] BLUE BACK LOCK_TV AVL SAVE MODE F0 00-7D BUS SETUP
SELECT POWER (MUISIC) 0039 DRI-BW-DVD 1D 00-3F FIX
PICTURE_NR PICTURE_NR 003A CUT-RW-DVD 20 00-3F FIX
S-BOOSTER LOUDNES 01 00-33 FIX
00FB (NEWS) (MOVIE)
003B CUT-GW-DVD 20 00-3F FIX
00FC
003C VER-SHI-P50 27 00-3F FIX
00FD
003D VER-AMP-P50 23 00-3F FIX
00FE 003E H0R-SHI-P50 1F 00-3F FIX
00FF 003F EW-W-P50 0B 00-3F FIX

Note: Highlighted item cannot be adjusted due fixed by software.(if adjusted it will has no effect) Note: Highlighted item cannot be adjusted due fixed by software.(if adjusted it will has no effect)

5-1 5-2
 NVM MODE ITEM (2/5) NVM MODE ITEM (3/5)
REMARK REMARK
ADDRESS DATA MICON EEPROM ADDRESS DATA MICON EEPROM
DEFAULT(hex) RANGE(hex) (HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT(hex) RANGE(hex)
(HEX) D7 D6 D5 D4 D3 D2 D1 D0
0040 E/W-PAR-P50 20 00-3F FIX 0080 U-CON-MUSC 3C 00-3C FIX
0041 V-SHI-60 (26) 1F 00-3F FIX 0081 U-CON-NEWS 32 00-3C FIX
0042 V-AMP-60 (27) 1F 00-FF FIX 0082 U-CON-MOV 3C 00-FC FIX
0043 H-SHI-60 (28) 26 00-FF FIX 0083 U-SHP-MUSC 1E 00-FE FIX
0044 EW-W-60 (29) 20 00-3F FIX 0084 U-SHP-NEWS 18 00-3E FIX
0045 E/W-PAR-60 (30) 1F 00-3F FIX 0085 U-SHP-MOV 24 00-3E FIX
0046 VER-SHI-P60 24 00-FF FIX 0086 OSD-BRIGHTNESS 1F 00-1F BUS SETUP

0047 VER-AMP-P60 25 00-FF FIX 0087 V-POS-OSD 30 00-3F FIX

0048 HOR-SHI-P60 25 00-3F FIX 0088 H-POS-OSD 01 00-3F FIX
0049 EW-W-P60 0A 00-3F ADJ 0089 AUTO-AGC-MAX 0F 00-20 FIX
004A E/W-PAR-P60 1E 00-3F ADJ 008A SVM2-0-NTSC 05 00-07 FIX
004B CUT OFF (32) 19 00-3F ADJ 008B VER-AMP-START 19 00-3F FIX
004C DCXO (33) 02 00-04 ADJ 008C OFFSET_OF_COL_DVD_FIELD_FREQ_50HZ 1F 00-3E FIX
004D DRI-RLC (40) 20 00-3F ADJ 008D V-POS-OSD60HZ 1A 00-3F FIX
004E DRI-GLC (41) 20 00-3F ADJ 008E SMEL-GAIN B0 00-FF FIX
004F DRI-BLC (42) 20 00-3F ADJ 008F FDAC-VOL1 0F 00-3C FIX
0050 CUT-RLC (43) 20 00-3F ADJ 0090 FDAC-VOL2 1E 00-3C FIX
0051 CUT-GLC (44) 20 00-3F ADJ 0091 FDAC-VOL3 2D 00-3C FIX
0052 DRI-RLW (30) 20 00-3F ADJ 0092
0053 DRI-GLW (31) 20 00-3F ADJ 0093 OFFSET_TINT_N443 1F 00-3E FIX
0054 DRI-BLW (32) 20 00-3F FIX 0094 SHAKIT _MEL 46 00-FF FIX
0055 CUT-RLW (33) 20 00-3F FIX 0095 SHAKIT_MER1 96 00-FF BUS SETUP

0056 CUT-GLW (34) 20 00-3F ADJ 0096 SHAKIT_MER2 9C 00-FF BUS SETUP

0057 DRI-RLC-DVD (67) 20 00-3F FIX 0097 SHAKIT_MER3 A3 00-FF BUS SETUP

0058 DRI-GLC-DVD (68) 20 00-3F ADJ 0098 SHAKIT_MER4 A5 00-FF BUS SETUP

0059 DRI-BLC-DVD (69) 20 00-3F ADJ 0099 OPTION_HOTEL_MAX_VOL 05 00-3C FIX

005A CUT-RLC-DVD (70) 20 00-3F ADJ 009A OPTION_HOTEL_PRG 02 00-63 FIX
005B CUT-GLC-DVD (71) 20 00-3F ADJ 009B SUB-VOL (36) 3C 00-3C FIX
005C DRI-RLW-DVD (57) 20 00-3F ADJ 009C OFFSET_SHARPNESS_LNA 14 00-3F FIX
005D DRI-GLW-DVD (58) 20 00-3F ADJ 009D STARTMER1 CF 00-FF FIX
005E DRI-BLW-DVD (59) 20 00-3F ADJ 009E STOPMER 00 00-FF FIX
005F CUT-RLW-DVD (60) 20 00-3F FIX 009F CUT-BS(20) 10 00-3F FIX
0060 CUT-GLW-DVD (61) 20 00-3F FIX 00A0 CUT-BS-DVD 20 00-3F FIX
0061 OF-COL-TV 1C 00-3E FIX 00A1 STARTMER2 A9 00-FF FIX
0062 OF-COL-AV 27 00-3E BUS SETUP 00A2 OFF_CON 20 00-3F FIX

6
0063 OF-COL-DVD 2D 00-3E BUS SETUP 00A3 OFF_BRI 20 00-3F FIX
0064 OF-COL-P 28 00-3E FIX 00A4 AV2_BRI 23 00-3F BUS SETUP

0065 OF-COL-S 24 00-3E FIX 00A5 FTUN_OFFSDEM_IF 16 00-3F FIX

0066 OF-COL-N4 27 00-3E FIX 00A6
0067 OF-COL-N3 27 00-3E FIX 00A7
0068 OF-SHP-TV 21 00-3E FIX 00A8 CONTRAST (MUSIC) 3C 00-3C FIX
0069 OF-SHP-AV 2B 00-3E FIX 00A9 COLOUR (MUSIC) 1E 00-3C FIX
006A OF-SHP-DVD 2B 00-3E FIX 00AA BRIGHTNESS (MUSIC) 1E 00-3C FIX

006B OF-SHP-P 23 00-3E FIX 00AB TINT (MUSIC) 1E 00-3C FIX

006C OF-SHP-S 1F 00-3E FIX 00AC SHARPNESS (MUSIC) 1E 00-3C FIX
006D OF-SHP-N4 1F 00-3E FIX 00AD BASS (MUSIC) 0F 00-14 FIX
006E OF-SHP-N3 28 00-3E BUS SETUP 00AE TREBLE (MUSIC) 10 00-14 FIX
006F OF-TINT-TV 14 00-3E FIX 00AF CONTRAST (NEWS) 32 00-3C FIX
0070 OF-TINT-AV 1E 00-3E FIX 00B0 COLOUR (NEWS) 18 00-3C FIX
0071 OFFSET_OF_COL_DVD_FIELD_FREQ_60HZ 1F 00-3E FIX 00B1 BRIGHTNESS (NEWS) 1E 00-3C FIX
0072 OF-TINT-ADJ 1F 00-3E FIX 00B2 TINT (NEWS) 1E 00-3C FIX
0073 BB-TINT 20 00-3F FIX 00B3 SHARPNESS (NEWS) 18 00-3C FIX
0074 U-BASS_MUSC 0F 00-3C FIX 00B4 BASS (NEWS) 0A 00-14 FIX
0075 U-BASS_NEWS 0A 00-3C FIX 00B5 TREBLE (NEWS) 0A 00-14 FIX
0076 U-BASS_MOV 0F 00-3C BUS SETUP 00B6 CONTRAST (MOVIE) 3C 00-3C FIX
0077 U-TREBLE_MUSC 10 00-3C BUS SETUP 00B7 COLOUR (MOVIE) 24 00-3C FIX
0078 U-TREBLE_NEWS 0A 00-3C FIX 00B8 BRIGHTNESS (MOVIE) 1E 00-3C FIX
0079 U-TREBLE_MOV 10 00-3C BUS SETUP 00B9 TINT (MOVIE) 1E 00-3C FIX
007A U-BRI-MUSC 1E 00-3E FIX 00BA SHARPNESS (MOVIE) 24 00-3C FIX
007B U-BRI-NEWS 1E 00-3E FIX 00BB BASS (MOVIE) 0F 00-14 FIX
007C U-BRI-MOV 1E 00-3E FIX 00BC TREBLE (MOVIE) 10 00-14 FIX
007D U-COL-MUSC 1E 00-3E FIX 00BD VOLUME 00 00-3C FIX
007E U-COL-NEWS 18 00-3E FIX 00BE BALANCE 1E 00-3C FIX
007F U-COL-MOV 24 00-3E FIX 00BF LAST PROGRAM 01 00-66 FIX

Note: Highlighted item cannot be adjusted due fixed by software.(if adjusted it will has no effect) Note: Highlighted item cannot be adjusted due fixed by software.(if adjusted it will has no effect)

6-1 6-2
 NVM MODE ITEM (4/5) SHIPPING SETTING & CHECKING
REMARK
ADDRESS DATA MICON EEPROM
(HEX) D7 D6 D5 D4 D3 D2 D1 D0 DEFAULT(hex) RANGE(hex)
* The following default data has been factory-set for the E2PROM follow by pressing MODEL SET key.
0 0 C0 APRV_FAVOURITE_KEY_RED 0A 00-66 FIX
00C1 APRV_FAVOURITE_KEY_GREEN 14 00-66 FIX
00C2 APRV_FAVOURITE_KEY_YELLOW 1E 00-66 FIX LANGUAGE SOUND SYSTEM
00C3 APRV_FAVOURITE_KEY_CYAN 28 00-66 FIX ENGLISH B/G
00C4 APRV_USER_FE_PROGRAM 01 00-66 FIX
00C5 APRV_USER_AV_PROGRAM 64 00-66 FIX
00C6 AVL_VOL_STEPDOWNLEVEL0 03 00-FF FIX
00C7 AVL_VOL_STEPDOWNLEVEL1 08 00-FF FIX ITEMS DATA SETTING
00C8 AVL_VOL_STEPDOWNLEVEL2 0A 00-FF FIX
LAST POWER ON
00C9 SHAKIT MER5 AA 00-FF BUS SETUP
LAST TV/AV MODE TV MODE
00CA SHAKIT MER6 B4 00-FF BUS SETUP

00CB SHAKIT_START 15 00-3C FIX LAST POSITION CH 1

00CC SHAKIT_STOP 3C 00-3C FIX FLASHBACK CHANNEL CH 1
00CE SHAKIT_STEP 7 00-3C FIX 1/2 DIGIT ENTRY 2 DIGIT ENTRY
Note: Highlighted item cannot be adjusted due fixed by software.(if adjusted it will has no effect) VOLUME 0 (Min)
BLUE BACK OFF
BUS S ET UP (E EPRO M DAT A) OFF TIMER -:-
Address Da ta CHILD LOCK OFF
EEPROM IT EM S REM ARK
(HEX ) (HEX ) PASSWORD 0000
FIX ANTENNA BOOSTER OFF
01F SUB-SHARP (25) 1E (D ata s ame as adjustment item
AFT ALL CH ON
25 SUB-SHARP = 30 (dec imal)
COLOR SYSTEM ALL CH AUTO
027 SUB-TINT -DVD 24 F IX
SKIP ALL CH OFF
062 OF-COL-AV 21 FIX CH 10
FAVOURITE PROGRAM A
063 OF-COL-DVD 2A FIX FAVOURITE PROGRAM B CH 20
06E OF-SHP-N3 1F F IX FAVOURITE PROGRAM C CH 30
076 U-BASS_MOV 0C FIX FAVOURITE PROGRAM D CH 40
077 U-TREBLE_MUSC 0D FIX AV MODE MOVIE
079 U-TREBLE_MOV
- 0C F IX CONTRAST 60
086 OSD BRIGHTNESS 0D FIX COLOUR +6

095 SHAKIT_MER1 71 FIX BRIGHTNESS 0

7
TINT 0
096 SHAKIT_MER2 76 F IX
097 SHAKIT_MER3 78 FIX SHARPNESS +6
PICTURE NR OFF
098 SHAKIT_MER4 82 FIX
WHITE TEMP 0
0A4 AV2_BRI 24 FIX
SURROUND OFF
0BF LAST PROGRAM 05 F IX +2
TREBLE
0C9 SHAKIT_MER5 8A FIX BASS +2
0CA SHAKIT_MER6 91 FIX S-BOOSTER ON
AVL ON
DSGLS OPTION/ AVL NORMAL DEFAULT
0EE SETTING OPTION/ 52 FIX
OPTION_SHAKIT_LOUDNESS_DSP FACTORY SETTING BY MODEL
0EF SURROUND(NEWS)/ SURROUND(MUSIC)/ (Reference : Geomagnetism Adjustment)
00 FIX
DIGIT ENTRY/ AV MODE
MODEL MAGNETIC FIELD (V, H) nT BACKGROUND LANG S-SYS LANG QTY
PWL/ VSD(31)/ VIRGIN/ BPB2/ FMI/ MUS/
0F4 D2 FIX INDONESIA -20,000 40,000 12300 o K ENGLISH B/G 1
PHI FORCE/ DSK-NOT-PAL-AV

0F8 SURROUND OPTION/ DVD OPTION/ AV2 F4 FIX

OPTION/ MULTI21 SYS. OPTION/ CB/ CBS/ 1: EGLISH
AVL OSD OPTION/ TREBLE LIMIT OPTION/
BASS LIMIT OPTION/ LNA BOOTER OPTION/ 4C FIX
0F9 AVL ON VOL TABLE OPTION/ SHAKIT
OPTION/ MP IN OPTION
AUTO SELECT/ [Link]/ BLUEBACK/ LAST
0FA POWER/ LOCK TV/ AVL/ SAVE MODE/ B0 FIX

PICTURE NR (NEWS)/ PICTURE NR (MOVIE)/ 00

0FB FIX
S-BOOTER/ LOUDNESS
6FE FACTORY SHIPOUT SOUND SYSTEM 01 FIX
6FF FACTORY SHIPOUT LANGUAGE 00 FIX

7-1 7-2
 ADJUSTMENT PRECAUTION: Makesure TV Set is in “Normal Condition” before switch to Service Mode for Adjustment. 3. HORIZONTAL, VERTICAL, DEFLECTION LOOP ADJUSTMENT

1. PIF ADJUSTMENT CHECKING

NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS

NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS 1 V-SLOPE (1) Receive Monoscope Pattern Signal
(I2C BUS CONTROL) (PAL 50 Hz).
1 RF-AGC TAKE OVER (1) Receive "PAL COLOR BAR" signal. * for Auto ADJ (2) Choose the service data 02 V-SLOPE.
POINT ADJUSTMEN T Signal Strength: 56 ± 1dBµV (75 ohm open) (1) Receive "PAL COLOR BAR" (3) Adjust the V-SLOPE as shown in Figure 1.1 A
B
(I2C BUS CONTROL) (2) Connect the oscilloscope to JA402 (Tuner's signal C
AGC Terminal) as shown in figure 3-1. signal strength :
(AUT O & MANUAL ADJ ) 56 ± 1 dBµV (75 ohm open).
OSCILLOSCOPE (1) Go to service mode. CAUTION:- PLEASE AGING TV MORE THAN
+ 10 MINUTES BEFORE ADJUSTMENT.
TV SET (2) Go to service data 01 RF-AGC, A = Out of spec
0.1V TP201 press R/C to operate auto key B = OK
1.0V - (Hex C1). Blue display with OK C = Out of spec
sign indicates the adjustment is
+ working properly Figure 1.1
(3) If appear red display with NG
-
BIAS BOX sign, increase data some step
2 V-SHIFT50 (1) Receive Monoscope Pattern Signal Figure:
and please repeat step 2.
(I2C BUS CONTROL) (PAL 50 Hz).
(4) Proceed step 4 & 5 in manual
(3) Call "01 RF-AGC" mode in service mode. (2) Choose the service data 03 V-SHI-50 A B
mode.
Adjust the "01RF AGC" bus data to obtain (3) Adjust V-SHI-50 bus data to have a most
the Tuner output pin drop 0.1~1.0V below acceptable vertical position, the monoscope
maximum voltage. pattern should be Balance in vertical position.
(4) Change the antenna input signal to Note: B line (Monoscope middle line) must
63 ~ 67dBµV , and make sure there is same or nearest higher position to the A

8
OK OK NG
no noise. mark (Tube middle mark),refer to the attach
(5) Turn up the input signal to 90 ~ 95 dBµV to drawing.
be sure that there is no cross modulation beat.

3 V-AMP-50 (1) Receive Monoscope Pattern Signal

(12C BUS CONTROL) (PAL 50 Hz).
(to be done (2) Choose the service data 04 V-AMP-50.
V-shift adj) (3) Adjust V-AMP-50 bus data until the overscan
become 10 ± 1.5 %.
2. FOCUS ADJUSTMENT Caution 1: Pls aging TV more than
10 minutes before adjustment

NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS 4 H-SHIFT-50 (1) Receive Monoscope Pattern Signal
(I2C BUS CONTROL) (PAL 50 Hz).
1 FOCUS (1) Receive the "Monoscope Pattern" signal. Focusing (2) Choose the service data 05 H-SHI-50 . A B
(2) Press R/C to set Picture NORMAL condition. Point (3) Adjust the H-SHI-50 bus data to have a
(3) Adjust the focus control to get the best (middle of balance position to spec of A=B
center and
focusing. (as attach drawing).
edge of
monoscope (4) If cannot make it to A=B , adjust from the
pattern) best point so that B slightly smaller than A.

8-1 8-2
 4. SCREEN, WHITE BALANCE, SUB-BRIGHTNESS & SUB-CONTRAST ADJUSTMENT
NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS
5 EW -W-50 (1) Receive Monoscope Pattern Signal
(I2C BUS CONTROL) (PAL 50 Hz). NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS
(2) Choose the service data 06 EW -W-50.
1 SCREEN (1) Make sure the following items are in INITIAL Note 1:
(3) Adjust EW -W-50 bus data until the overscan
ADJUSTMENT DATA before adjust CR T cutoff During service mode select 31VSD
becomes 10 ± 1.5 %.
(I2C BUS CONTROL) (a) 15 DRI-RS = 32 (Dark Screen Display), If the vertical line
6 E/W -PAR-50 (1) Receive CrossHatch Pattern Signal (b) 16 DRI-GS = 32 does not appear, Please press vol up key.
(I2C BUS CONTROL) (PAL 50 Hz). (c) 17 DRI-BS = 32
(2) Choose the service data 07 E/W -PAR-50. (d) 18 CUT -RS = 16
(3) Adjust the 2nd vertical line from the right (e) 19 CUT -GS = 16
end of the crosshatch pattern so that the (f) 20 CUT -BS = 16
middle 4 blocks are straight. (f) 21 SUB BRI = 24
(g) 22 SUB CON = 59
(h) 32 CUT OFF = 25
7 UPCOR-P AR (1) Receive CrossHatch Pattern Signal (i) 35 BLOC= 4
(I2C BUS CONTROL) (PAL 50 Hz). (2) Switch TV to video mode, blue back off, with
(2) Choose the service data 10 UPCOR-P AR. no signal and press R/C to set picture into
(3) Adjust the 2nd upper vertical line from the normal condition.
right end of the crosshatch pattern so that the (3) G o to service mode, select item 31 VSD
upper line are straight. (dark screen display)
(4) Adjust the Screen so that cut-off line appear in
low bright, then judge that whether the cut-off
8 LOCOR-P AR (1) Receive CrossHatch Pattern Signal line appear in Red or Green or Blue color, in
(I2C BUS CONTROL) (PAL 50 Hz). this condition between CUT -RS & C UT -GS &
(2) Choose the service data 11 LOCOR-P AR. cut-BS, fix the data of the color appear in
(3) Adjust the 2nd lower vertical line from the right cut-off line and adj the other two cut-off data
end of the crosshatch pattern so that the (Note 1) so that cut-off line color become white.
bottom line are straight. (5) Turn the screen VR of FBT so that cut-off line

9
just disappear

9 H-BOW (1) Receive CrossHatch Pattern Signal 2 WHITE BALANCE ADJ (1) WHITE (HIGH BEAM) WINDOW PATTERN SIGNAL
(I2C BUS CONTROL) (PAL 50 Hz). (to be done after (In Window Pattern Signal)
(2) Choose the service data 9 H-BOW . H-BOW
screen adj) First use Minolta Color Analyzer CA100, let the Dark
(3) Adjust the 2nd vertical line from the end of the White
(I2C BUS CONTROL) gun point at Dark White position (as drawing White
crosshatch pattern until line is straight attach), Adj SUB-BRI until LUMINANCE Y
(4) Please refer Figure 9.1 become 4 cd/m2 , then let the gun point at
Figure 9.1 White position (as drawing attach), Adj SUB-
10 H-P AR (1) Receive CrossHatch Pattern Signal CON until LUMINANCE Y become: 150 cd/m2.
Adj the DRI-RS & DRI-BS until the axis of color 5.5% IRE 50% IRE 9.5% IRE
(I2C BUS CONTROL) (PAL 50 Hz).
(2) Choose the service data 8 H-PAR. H-P AR temperature become
(3) Adjust the 2nd vertical line from the end of the *Note : Signal using W/B Pattern
crosshatch pattern line is straight 12300 °K X : 0.272 , Y : 0.275 Generator SX-1006 (IW ATSU)
(4) Please refer Figure 10.1 or equivalent.
(2) DARK WHITE (LOW BEAM) Window Pattern Signal output
Figure 10.1
Let the gun point at Dark White position, if level are as above:
11 EW -TRAP (1) Receive CrossHatch Pattern Signal the color temperature data shift away from
(I2C BUS CONTROL) (PAL 50 Hz). D2 the data adjusted in Item 1 Screen
(2) Choose the service data 12 EW -TRAP . adjustment, adjust CUT -RS, CUT GS
(3) Adjust the 2nd vertical line from the right & C UT -BS.
end of the crosshatch pattern so that the D1 Please fix the first colour appears in Screen
D1 (center area of the second vertical adj item step (4) is fixed, adj the other two
line - edge of screen) and D2 (top area of so that to obtain the similar axis as above.
the second vertical line - edge of screen) ** R epeat s tep 1 & 2 t o get a regulated
are same. position

9-1 9-2
 5. PAL CHROMA ADJUSTMENT
NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS

3 SUB-BRIGHTNESS (1) In Window Pattern Signal condition. WINDOW PATTERN SIGNAL NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS
(to be done after (2) Using Minolta Color Analyzer CA-100,
screen, white let the gun point at Dark White position 1 SUB COLOUR 1. Receive the "PAL Split Color Bar" signal.
balance adj) (as attach drawing), adjust SUB-BRI Bus
(I2C BUS CONTROL) data until : (I2C BUS CONTROL) 2. Make the image normal with the remote R
100% WHITE
controller.
S ervice Luminanc e Toleranc e (cd/m2)
3. Connect the oscilloscope to TP47R (R863)
mode (cd/m2) Upper limit Lower limit
Dark White RED-OUT .
E nable 4.0 +0.5 -0. 5
Disa ble 4.0 +2.5 -1.0 Range : 500mV/Div (AC)
(Use Probe 10:1) Cy G
Sweep time : 10µsec/Div

4 SUB-CONTRAST (1) In Window Pattern Signal condition. WINDOW PATTERN SIGNAL 4. Set the sub color adjustment mode with the W Y Mg B
(to be done after (2) Using Minolta Color Analyzer CA-100, let remote controller, and vary the sub color data
screen, white the gun point at White position (as attach to make 100% W of the color bar and RED Fig 1-1
balance adj, drawing), adjust SUB-CON Bus data until : at the same level for adjustment shown in
sub-brightness adj) Fig. 1-1.
(I2C BUS CONTROL) S ervice Luminanc e Toleranc e (cd/m2)
mode (cd/m2) Upper limit Lower limit
E nable 150. 0 +10 -10
Disable 150. 0 +20 -10 White

10
6. NTSC CHROMA ADJUSTMENT
5 BEAM (1) Receive the "Monoscope Pattern" signal.
CURRENT (2) Press R/C to set Picture NORMAL condition.
CHECK (3) Connect the DC miliammeter between T P 603
( + ) & T P 602 ( - ) (Full Scale: 3mA Range). NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS
(4) Beam current must be within : 1000 ± 100µA
1 SUB-TINT (1) Receive the "NTSC 3.58 Colour Bar" signal
through AV IN from IWATSU SX1006 pattern
(I2C BUS CONTROL) generator.
(to be done after
sub colour adj) (2) Connect the oscilloscope to TP47B (R865) Same Level
BLUE-OUT

Range : 500mV/Div (AC)

(Use Probe 10:1)
Sweep time : 10µsec/Div W Y Cy G Mg R B

(3) Select the "SUB-TINT" item in the Fig 1-2

ADJUSTMENT MODE.. Adjust the "SUB -
TINT" data to obtain the waveform shown
as Figure 1.2 (W and Mg same level)

10-1 10-2
 7. PROTECTOR OPERATION CHECKING 9. FUNCTION OPERATION CHECKING (VIDEO & AUDIO)

NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS

NO ADJUSTMENT POINT ADJUSTMENT CONDITION / P ROCEDURE WAVEFORM OR OTHERS
1 CONTRAST Key (1) Receive "Monoscope Pattern" signal.
1 H, V PROTECT OR (1) Receive "Monoscope Pattern" signal.
(2) Press to Menu mode, then select Picture Mode and
(2) Connect output of Bias Box to D602 cathode set to select CONTRAST .
(C602 positive). (3) Press Volume Up/Down key to check whether the
(3) Set voltage of Bias Box to 18V and make sure CONTRAST effect is OK or not.
the protector is not working.
(4) Set voltage of Bias Box to 28.5V . The tv will 2 COLOUR Key (1) Receive "Colour Bar" signal.
four times in "ON" and "OFF"condition before
(2) Press to Menu mode, then select Picture Mode and
set to select COLOUR.
the protector ON and switch to standby mode.
(3) Press Volume Up/Down key to check whether the
COLOUR effect is OK or not.
2 OTHER PROTECT OR (1) Once finish rectified Electrolytic Capacitor 3 BRIGHTNESS Key (1) Receive "Monoscope Pattern" signal.
short testing in + B line, check all possible (2) Press to Menu mode, then select Picture Mode and
damaged components on +B line. set to select B RIGHTNESS.
(Use random selected set for inspection) (3) Press Volume Up/Down key to check whether the
BRIGHTNESS effect is OK or not.
11-2 4 TINT Key (1) Receive the "NTSC C olour Bar" signal thru AV in.
(2) Press to Menu mode, then select Picture Mode and
select TIN T.
(3) Press Volume Up/Down key to check TIN T, UP for
GREEN direction and DOWN for R ED direction
whether is OK or not.
5 SHARPNESS Key (1) Receive "Monoscope Pattern" signal.
8. A/V INPUT & OUTPUT CHECKING (2) Press to Menu mode, then select Picture Mode and
set to select S HARPNESS.
(3) Press Volume Up/Down key to check whether the
S HAR P NE S S e ffect is O K o r NOT.
NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS CH DISPLAY (1) All C h (1~99) will have an OSD display of the channel
6
COLOUR number in green colour under AF T ON condition.
1 VIDEO AND AUDIO (1) Receive the "PAL Color Bar" signal (100% (1) Receive "music" sound signal. *Note:
7 SURROUND
OUTPUT CHECK White Color Bar , Sound 400 Hz 100% Mod). (2) Set MENU, then go into SOUND MENU to select 1)If SURROUND I/II ON, Balance
(2) Terminate the Video output with a 75 ohm SURROUND. function cannot be adjust.
impedance.

11
(3) Press VOLUME UP/DOWN key to check 3) SURROUND I: During stereo signal
Make sure the output is as specified SURROUND I, II and OFF effect. reception produces a spacious
(1.0 Vp- p ± 3 dB). sound, making the most of the
(3) Terminate the Audio output with a 10K ohm speaker's performance.
impedance. 2) SURROUND II :
Make sure the O/P is as specified During monaural signal reception
(1.76 Vp- p ± 3 dB). creates monaural sound that is similar
to stereophonic sound.
8 TREBLE (1) Receive "music" sound signal.
2 VIDEO AND AUDIO (1) Using the TV/VIDEO key on the remote Caution:
(2) Set MENU, then go into SOUND MENU to select
INPUT CHECK controller, make sure that the modes change AV 1 share with YU V. Therefore,
TREBLE.
in order of T V, AV1,A V2 & T V again and the if YUV signal is connected to (3) Press VOLUME UP/DOWN key to check TREBLE
video & audio output are according to the Component In terminal, only effect is OK or not.
input terminal for each mode. component is will detected.
9 BASS (1) Receive "music" sound signal.
(2) Video cross-talk AV to TV checking :
(2) Set MENU, then go into SOUND MENU to select
a) When connect AV 1 input, check TV als o BASS.
b) When connect AV 2 input, check TV als o (3) Press VOLUME UP/DOWN key to check B ASS
effect is OK or not.
(1) Connect YUV & Audio signal to Component 10 BALANCE (1) Receive mono-tone signal.
3 COMPONENT IN
In terminal and Audio terminal.
(2) Set MENU, then go into SOUND MENU to select
CHECK
BALANCE.
(2) Using the TV/VIDEO key on the remote
(3) Press VOLUME UP/DOWN key to check whether
controller, press it until the modes change to
the left to right BALANCE effect is OK or not.
COMPONENT , confirm output is appear .
(3) Audio source is share with AV 1 11 LOUDNESS (1) Receive "music" sound signal. *Note:
(2) Adjust volume to 10. Please make sure SURROUND is set
(3) Set MENU, then go into S OUND MENU to select to OFF .
LOUDNESS. If SURROUND I/II ON, Balance
(4) Press VOLUME UP/DOWN key to check LOUDNESS function cannot be adjust
effect is OK or not.

11-1 11-2
 NO ADJUSTMENT POINT ADJUSTMENT C ONDITION / PROCEDURE WAVEFORM OR OTHERS NO ADJUSTMENT POINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR REMARKS

12 NORMAL K EY (1) Once in Picture Mode,and the NORMAL key is Note 1: 14 COLOUR SYSTEM (1) Receive the " PALCOLOUR BAR" signal, press the COLOUR SYSTEM
pressed, all the settings will be present to In NORMAL Mode, when press NORMAL key to select modes except PAL, check the COLOUR is not working . properly.
Then, select the " PAL" mode. Check again its colour so that it is working
. properly.
normal setting. (Normal setting of selected AV key, will appear NORMAL OSD and all
mode) setting will set to normal of the AV mode (2) Receive "SECAM COLOUR BAR" signal, press COLOUR SYSTEM
selected. key to select modes except SECAM, check the COLOUR is not working . properly
Then, select the "SECAM" mode. Check again its colour so that it is working
MOVIE MODE MUSIC MODE
properly.
CONTRAST 60 CONTRAST 60
(3) Receive "NTSC 4.43" signal, press COLOUR SYSTEM key to select
COLOUR +6 COLOUR 0
modes except NTSC 4.43, check the COLOUR is not working properly.
BRIGHTNESS 0 BRIGHTNESS 0 Then, select the "NTSC 4.43" mode. Check again its colour so that it is working
TINT 0 TINT 0 properly.
SHARPNESS +6 SHARPNESS 0 (4) Receive "NTSC 4.43/3.58 COLOUR BAR" signal thru AV, press COLOUR
WHITE TEM P Mid WHITE TEM P Mid SYSTEM key to select modes except N4.43/3.58, check the COLOUR is not
working properly. Then, select the "NTSC 4.43/3.58" mode. Check again its
NEWS MODE colour so that it is working properly.
.
CONTRAST 50
COLOUR -6 15 SOUND SYSTEM (1) Receive "PAL-D/K" signal, press the "SOUND SYSTEM"
BRIGHTNESS 0 to select B/G, I. Check the sound output is not working properly.
TINT 0 Select D/K and check the sound output to make sure it is working properly.
SHARPNESS -6 (2) Receive "PAL-I" signal, press the "SOUND SYSTEM"
WHITE TEM P Mid to select B/G, D/K. Check the sound output is not working properly.
Select I and check the sound output to make sure it is working properly.
(2) Once in Audio Menu,and the NORMA L key is (3) Receive "PAL-B/G" signal, press the "SOUND SYSTEM"
to select I, D/K. Check the sound output is not working properly.
pressed, all the settings will be present to Select B/G and check the sound output to make sure it is working properly.
normal setting (Normal setting of the selected
AV mode)
16 [Link] (1) Turn up the volume control to maximum, make sure the sound is heard from *Note:
CHECKING speakers. For model with [Link] feature
MOVIE MODE MUSIC MODE (2) Make sure M.P. IN feature is set to ON.
SURROUND ONII SURROUND OFF (3) Plug in stereo cable in [Link] terminal.
TREBLE +2 TREBLE +3 (4) '[Link] ' OSD will appear at bottom right corner TV screen, RF channel sound will
BASS +2 BASS +5
be switched to [Link] sound.
BALANCE 0 BALANCE 0 (5) Check the sound is normal.
AVL ON AVL ON
LOUDNESS ON LOUDNESS ON

12
17 NOISE MUTE (1) Receive mono-tone signal.
CHECKING (2) Turn up the volume control to maximum, make sure the sound is
NEWS MODE
heard from the speakers. Then put the unit in no signal state.
SURROUND OFF
(3) Check the sound mute is effective.
.
TREBLE 0
(4) Finally turn sound level of CTV to minimum.
BASS 0
BALANCE 0
AV L ON 18 OSD LANGUAGE (1) Check OSD LANGUAGE quantity and type for respective model.
LOUDNESS ON QUANTITY CHECK
MODEL QUANTITY ENGLISH CHINESE MALAY
13 WHITE TEMP (1) Receive "Monoscope Pattern" signal.
21S-FX10M 3 O O O
(2) Set FUNCTION to select WHITE TEM P.
(3) Press Volume Up/Down key to check WHITE
TEMP Option, ST ANDARD:
NORMAL SETTING, WARM for more
REDDISH direction changing, COOL for
more BLUISH direction changing.

12-1 12-2
 10. SHOCK TEST CHECKING

NO ADJUSTMENTPOINT ADJUSTMENT CONDITION / PROCEDURE WAVEFORM OR OTHERS

1 SHOCK TEST (1) Hit at the top of TV set for two time.
(2) Check TV set not damage and TV operation operate correctly.

13
13-1 13-2
 CIRCUITS TO BE CHECKED:
Tuner. NO PICTURE, NO SOUND
NO RASTER PIF.
Automatic Gain Control.
(5V), (32V) Power Source. Does the noise level increase at max.
Check F701. Blown out. Contrast, Brightness and Sound controls ?

Replace the fuse. Noise increases but no signal is

No snow noise.
received.

Check T701 pin (8) voltage

The fuse is blown out again. Does noise or signal appear at pin (34)
(Approx. 310V at 220V AC) Check the tuner supply voltage LB must
of IC1001 ?
approx. 5V. BT must be approx. 33V.
Check NR701. And check the CH preset data.
Check IC701, D701 and
C705.

Check Secondary Main+B

(Approx. 125V) Normal
Check the tuner AGC at Does noise or Check IC1001 and
JA402. signal appear at related circuit.
Check D751, Check D760 for 8V regulator pin (45) and (46)
IC702 and IC703 Check CRT connector K- circuit, IC751 for 3.3V regulator of IC1001 ?
wire and the signal on it. circuit and IC752, D724, D725
for 5V regulator circuit.
Check pin (40) of
IC1001, Tuner and
related circuit.

14
Check pin (1) of
Check 185V SF201, Tuner and Check pin (40) at
Check related circuit. IC1001 and related
Bias on IC1001.
CRT board. Checking the circuit.
protector circuit.

Does horizontal circuit

oscillate ?
NO V E R T IC A L S C A N
Check Q601,
Check IC1001 pin 20. Normal Q602 and Q803

C heck IC 501 bias .

C heck C 511 and C 516. C heck IC 501.

14-1 14-2
 C IR C UIT S T O B E C HE C K E D:
S ound Detector C ircuit. NO S OUND
S ound S witch and Att. NO S P E C IF IC C OL OUR
C ontrol.
Audio Output C ircuit.
Does s ignal appear at pins C heck T V s ound from pin (25) &
(11) and (12) of IC 3801 ? pin (26) of IC 1001.
Is s ome colour produced in
YES (S ignal) B /W broadcas t reception ?
Does s ignal appear at pins
(2) and (4) of IC 301 ?
C heck IC 1001. Is the white balance properly
adjus ted ?

C heck S peaker. C heck IC 301 and

peripheral circuit.
R e-adjus t the white balance.

NE IT HE R V E R T IC A L NOR
T he picture colour is cyan. T he picture colour is magenta. T he picture colour is yellow.
HOR IZONT A L S Y NC HR ONIZA T ION
C IR C UIT T O B E C HE C K E D:

15
S ync. S eparator C ircuit. C heck IC 851 pin (9) and its C heck IC 851 pin (8) and its C heck IC 851 pin (7) and its
C heck pins (20), (21), (47) adjacent circuits . adjacent circuits . adjacent circuits .
and (48) of IC 1001.

DE F E C T IV E V E R T IC A L A MP .
A ND V E R T IC A L L INE A R IT Y NO C OL OUR
“ P A L / S E C A M / NT S C ”
(NO C OL OUR S Y NC HR ONIZA T ION)
R e-adjus t vertical s ize.
(B us Data)

C heck IC 1001 and bias

V ertical linearity and s ize are control circuit.
abnormal.

C heck R 503, R 506 and

R 521.

C heck X801 (24.576MHz)

15-1 15-2
 WAV E F OR MS

(1) 1.9 Vp-p (H) (2) 2.34 Vp-p (H) (3) 2.09 Vp-p (H) (4) 2.44 Vp-p (H)

(5) 4.43 Vp-p (H) (6) 5.99 Vp-p (H) (6) 0.944 Vp-p (V) (8) 3.97 Vp-p (H)

(9) 42.1 Vp-p (H) (10) 1.102 KVp-p (H) (11) 64.9 Vp-p (V) (12) 1.94 Vp-p (V)

(13) 156.5 Vp-p (H) (14) 525 Vp-p (15) 5.99 Vp-p (V) (16) 2.52 Vp-p (H)

(17) 2.32 Vp-p (H) (18) 2.63 Vp-p (H) (19) 131.5 Vp-p (H) (20) 112.5 Vp-p (H)

(21) 126 Vp-p (H)

16
S OL ID S TAT E DE V IC E B A S E DIA G R A M

17
18
B L OC K DIA G R A M
C R T UNIT

S HA K IT UNIT

19
B L OC K DIA G R A M
MA IN UNIT

20 21
 DESCRIPTION OF SCHEMATIC DIAGRAM
NOTES:
SAFETY NOTES: 1. The unit of resistance "ohm" is omitted.
1. DISCONNECT THE AC PLUG FROM THE AC OUTLET BEFORE
(K = 1000 ohms, M = Mega ohm).
REPLACING PARTS.
2. All resistors are 1/16 watt, unless otherwise noted.
2. SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS
3. All capacitors are mF, unless otherwise noted. (P = mmF).
POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS OP-
ERATING.

VOLTAGE MEASUREMENT CONDITIONS:

IMPORTANT SAFETY NOTICE:
1. Voltages in parenthesis measured with no signal.
PARTS MARKED WITH " " ( ) ARE IMPORTANT FOR
2. Voltages without parenthesis measured with 3mV B & W or Col-
MAINTAINING THE SAFETY OF THE SET. BE SURE TO RE-
our signal.
PLACE THESE PARTS WITH SPECIFIED ONES FOR MAINTAIN-
3. All the voltages in each point are measured with VTVM.
ING THE SAFETY AND PERFORMANCE OF THE SET.

SERVICE PRECAUTION:
THE AREA ENCLOSED BY THIS LINE ( ) IS DIRECTLY WAVEFORM MEASUREMENT CONDITIONS:
CONNECTED WITH AC MAINS VOLTAGE. 1. The colour bar generator signal of 1.0V peak applied at pin (24)
WHEN SERVICING THE AREA, CONNECT AN ISOLATING TRANS- of IC201.
FORMER BETWEEN TV RECEIVER AND AC LINE TO ELIMINATE 2. Approximately 4V AGC bias .
HAZARD OF ELECTRIC SHOCK.

22
 S C HE MATIC DIAG R AM: C R T UNIT
J

1 2 3 4 5 6 7 8 9 10

23
 SCHEMATIC DIAGRAM: MAIN UNIT
J

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

24 25
 S C HE MATIC DIAG R AM: S HAK IT UNIT
J

1 2 3 4 5 6 7 8 9 10

26