Scribd
Upload
93 views3 pages

Overview of Cathode Ray Tube (CRT)

The cathode ray tube (CRT) is the core component of an oscilloscope. It generates and accelerates an electron beam that is deflected towards a fluorescent screen, where it produces a visible spot. The CRT consists of an electron gun that produces the beam, deflection plates that control where the beam hits the screen, and a fluorescent screen that glows when struck by electrons. All components are enclosed in an evacuated glass tube.

Uploaded by

Geetha Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views3 pages

Overview of Cathode Ray Tube (CRT)

The cathode ray tube (CRT) is the core component of an oscilloscope. It generates and accelerates an electron beam that is deflected towards a fluorescent screen, where it produces a visible spot. The CRT consists of an electron gun that produces the beam, deflection plates that control where the beam hits the screen, and a fluorescent screen that glows when struck by electrons. All components are enclosed in an evacuated glass tube.

Uploaded by

Geetha Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CATHODE RAY TUBE (CRT)

DISPLAY

The device which allows, the amplitude of such signals, to be displayed primarily

as a function of time, is called cathode ray oscilloscope. The cathode ray tube

(CRT) is the heart of the C.R.O. The CRT generates the electron beam, accelerates

the beam, deflects the beam and also has a screen where beam becomes visible as a

spot. The main parts of the CRT are

i) Electron gun

ii) Deflection system

iii) Fluorescent screen

iv) Glass tube or envelope

v) Base

(fig) cathode ray tube


Electron Gun

 The electron gun section of the cathode ray tube provides a sharply focused,

electron beam directed towards the fluorescent-coated screen.

 This section starts from thermally heated cathode, emitting the electrons.

 The control grid is given negative potential with respect to cathode.

 This grid controls the number of electrons in t beam, going to the screen.

 The momentum of the electrons (their number x their speed) determines the

intensity, or brightness, of the light emitted from the fluorescent screen due

to the electron bombardment.

 The light emitted is usually of the green colour.

Deflection System

 When the electron beam is accelerated it passes through the deflection

system,

 with which beam can be positioned anywhere on the screen.

Fluorescent Screen

 The light produced by the screen does not disappear immediately when

bombardment by electrons ceases, i.e., when the signal becomes zero.


 The time period for which the trace remains on the screen after the signal

becomes zero is known as “persistence or fluorescence”.

 The persistence may be as short as a few microseconds, or as long as tens of

seconds or even minutes.

 Medium persistence traces are mostly used for general purpose applications.

 Long persistence traces are used in the study of transients.

 Long persistence helps in the study of transients since the trace is still seen

on the screen after the transient has disappeared.

Glass Tube

 All the components of a CRT are enclosed in an evacuated glass tube called

envelope.

 This allows the emitted electrons to move about freely from one end of the

tube to the other end.

Base

 The base is provided to the CRT through which the connections are made to

the various parts.

Source: [Link]

You might also like