WORLD BRAND SLEF-PROPELLED FULL

FEEDING COMBINE HARVESTER

PART CATALOGUE
(RUILONG SERIES)

Jiangsu World Agriculture Machinery CO.,LTD

(Version 2019)
 Prologue

The World Ruilong series combine harvester was designed and produced by
Jiangsu World Agriculture Machinery Co., Ltd. With decades of research,
development and practice, this series combine harvester has the
characteristics of simple structure, convenient maintenance, high work
efficiency, low failure rate, high cleanliness rate of grain and so on. It is
suitable for harvesting rice, wheat, corn, soybeans, millet, sunflower seeds
and other crops.

This manual is made according to the product drawings of World Ruilong

series combine harvester, which can be used by the user to maintain and
repair the harvester, select and purchase the spare parts, and can also help the
user to understand the internal and external structure of the harvester.

This manual describes the components of the spare parts through illustrations.
Each illustration is attached with a detailed parts list with the name and
quantity of the parts. About the spare parts code, "GB" is the national
standard of China, and "JB" is the standard issued by the former Ministry of
Mechanical Industry of China. Therefore, when ordering spare parts, please
write down the standard of the spare parts.

When purchasing the spare parts of World Ruilong series combine harvester,
please indicate the harvester model, production date and factory number.
According to this drawing book, you can find the spare parts name and its
code, then describe the spare parts which you need accurately and completely,
so that we can better serve you. Please comply with the following
requirements to place an order for spare parts:

Page Number + Serial Number + Part Number + Part Name + Quantity

With the development of science and technology and the practical using
requirements, the World Ruilong series combine harvester will be
continuously improved and perfected, which may cause a little difference
between the products and the catalog. Please take the actual object of the
harvester product as the standard. If it is unclear, please contact Jiangsu
World Agriculture Machinery Co., Ltd. (Tel: +86-0511-8801 2230) or our
local dealer. Changes made to the product after its improvement will be
revised in new parts catalog. Please understand us if there has no prior notice.
As this book involves a lot of contents, it is inevitable that there are
deficiencies. We sincerely hope that our customers will give us your
suggestions on product quality, performance and structure in a timely manner,
so that we can further improve our products and perfect the using technology.

Jiangsu World Agriculture Machinery Co., Ltd. owns the copyright, change
and interpretation rights of this spare parts catalog. No unit or individual may
reprint, publish or copy this parts catalog without authorization.

Jiangsu World Agriculture Machinery Co., Ltd.

2019-01-01
 Content
Page
No. Description No.

1 Header and Conveyor 1

Header & Conveyor Assy 2

Header Assy 4

Reel Assy 6

Eccentric Roller Assy and Reel Pulley Assy 8

Header Auger Assy (Header 2.2m ) 10

Cutter Assy (Header 2.2 m) 14

Reel Transmission Assy 16

Blade Driving Assy 20

Header Transmission Tension Pulley and Chain Tension Pulley Assy 24

Header Divider Assy , Left & Right 26

Conveyor Assy 28

Conveyor Tension Pulley Assy 32

Conveyor Driven Wheel Assy 34

2 Thresher Part 36

Thresher Assy(Canopy ) 37

Thresher Assy (Cabin) 43

Threshing Cylinder 49

Main Tension Assy 51

Threshing Cover Assy (Round) 53

Threshing Cover Assy (Adjustable) 55

Straw Guide Plate 57

 Page
NO. Description No.

Cover Plate Assy 59

Double Transmission Gearbox Assy (2SB Type 1465 Belt Only) 61

Double Transmission Gearbox Assy (SC Type 1496 Belt Only) 65

Handle Assy 69

Fan Assy 71

Impurity Assy 73

Impurity Lifting Assy 75

Re-thresher Housing Assy 77

Horizontal Auger Assy 79

Impurity Gearbox Assy 81

Vibration Sieve Assy 83

Vibration Sieve Assy 85

Vibration Sieve Assy 87

Upper Sieve Assy 89

Rear Sieve Assy 91

Lower Separating Plate Assy 93

Tesion Pulley Assy 95

Main Clutch Tension Assy 97

Support Frame Assy 99

Horizontal Grain Auger Assy (Sack Type) 101

Grain Auger Assy (Grain Tank Type) 104

Vertical Lifting Auger Assy 107

Tension Pulley Assy 109

 Page
NO. Description No.

Tension Chain Wheel Assy 111

Gearbox Assy 113

3 Straw Chopper 115

Transition Wheel Assy 118

Tension Assy 120

Straw Chopper Assy 122

Tension Frame Assy 124

Fixed Chopper Assy 126

Straw Chopper Shaft Assy 128

Blade Fixing Plate Assy 130

Rear Plate Assy 132

Anti-tangle Assy 134

Straw Separating Plate Assy 136

4 Chassis 138

Chassis Assy (Ruilong Plus, Cabin Type) 139

Chassis Assy (Ruilong Plus, Canopy，Big Grain Tank) 141

Chassis Assy (Ruilong Plus, Sack Type) 143

Gearbox Assy 147

HST Assy 149

HST Connector (Canopy Type) 151

HST Connector (Cabin Type) 153

Working Tension Pulley Assy 155

 Page
NO. Description No.

Safety Railing Assy 157

Pedal Assy (Cabin Type) 159

Pedal Assy (Canopy) 161

Support Roller Assy 163

Balance Roller Assy 165

Support Roller Assy 167

Tension Pulley Assy 169

Middle Support Assy 171

5 Engine (Sack Type) 173

Engine Assy W3.5H-09X-01-00 (Sack Type) 174

Fuel Tank Assy W2.5DA-03H-04-00SP 176

6 Engine (Canopy, Grain Tank Type) 178

Engine Assy W3.5H-09-01-00SP (Upper Exhaust) 179

Engine Assy ,102HP, Grain Tank (Lower Exhaust) 183

Fuel Tank Assy 185

7 Engine (Cabin Type) 187

Engine Assy W3.5H-09F-01-00SP(Upper Exhaust) 188

Engine Assy W3.5H-09F-01-00(Lower Exhaust) 192

Radiator Assy (Cabin) 196

Fuel Tank Assy W2.5DA-03H-04-00SP 198

8 Hydraulic part (Sack Type) 200

 Page
NO. Description No.

Hydraulic Valve Assy W2.5DD-05DX-00 (Sack Type) 201

9 Hydraulic part (Canopy, Grain Tank Type) 206

Hydraulic System W2.5DD-05TC-00(40 Grain Unloading Cylinder) 207

10 Hydraulic part (Cabin Type) 212

Hydraulic Valve Assy W2.5E-05GW-00 (Cabin Type) 213

11 Operation Part (Canopy Type) 218

Operation Assy 219

Operation Platform Assy 221

Engine Shield Assy 223

12 Operation Part (Canopy, Auto Unloading Type) 225

Operation Assy 226

Operation Platform Assy 228

Main/Auxiliary Shift Handle W3.5H-07D-04-00 230

Engine Shield Assy W3.5H-07D-06-00 234

13 Handle Part (Cabin Type) 236

Handle Assy (With Cabin) W3.5H-07F-00 237

Dust Proof Cover Assy W3.5H-07F-06-00 239

Main/Auxiliary Shift W3.5H-07F-04-00 241

14 Canopy Part 245

Canopy Assy (Big Grain Tank, Canopy) 246

Canopy Assy (Small Grain Tank, Canopy) 248

15 Cabin Part 250

 Page
NO. Description No.

W3.5H-20-00 Cabin Assy (Air condition Cabin) 251

16 Lower Blade Part 255

Lower Blade Assy 256

Support Plate Assy 258

Lower Blade Assy 260

Upper Blade Assy (2 m) 264

Blade Assy (2.2 m) 266

Triangle Swing Arm Assy 268

17 Grain Tank Part 270

Grain Tank Assy (W3.5H-04BX-00, W3.5H-04GX-00) 271

Grain Unloading Lifting Auger Assy (W3.5H-04BX-02-00) 275

Unloading Handle Assy (W3.5H-04BX-03-00) 277

Front Frame Assy (W3.5H-04BX-07-00) 278

Rear Frame Assy (W3.5H-04BX-09-00) 279

Support Assy (W3.5H-04GX-06-00) 280

Lever Assy (W2.5B-04CY-06-00B) 282

Cover Frame Assy (W2.5B-04BX-08D-00) 283

Transmission Box Assy (W2.5B-04CY-10B-00) 284

Cover Assy 286

Grain Vibrator Assy 287

360°Auger Assy (W2.5B-04BX-11D-00) 288

Grain Unloading Upper Housing Assy (W2.5B-04BX-03-00) 290

Ⅰ. Header and Conveyor

- 1 -
Header & Conveyor Assy

- 2 -
 Header & Conveyor Assy

NO. Description QTY Part Code Note

1 Plate (2) 10 W2.5E-01B-26
2 Plate (1) 4 W2.5E-01B-25
3 Bolt M8×55 4 GB/T12-88
4 Bolt M10×90 5 GB/T5782-86 10.9
5 Washer 10 10 GB/T93-87
6 Nut M10 10 GB/T6170-86
7 Conveyor Assy 1 W3.5H-01-02-00
8 Header Assy (2.2m) 1 W3.5H-01-01-00
9 Pipe Clamp 8 W2.5E-01B-28
10 Bolt M8×25 8 GB/T5783-86
11 Washer 8 16 GB/T97.1-85
12 Washer 8 31 GB/T93-87
13 Left Cover, Header 1 W2.0-01-03-00
14 Upper Frame Weld, Cover 1 W2.0-01-07-00
15 Rear Frame, Cover 1 W2.5E-01D-08
16 Nut M8 8 GB/T6170-86
17 Bolt M8×20 24 GB/T5783-86
18 Feeding Plate, Right 1 W3.5-01A-12
19 Feeding Plate, Left 1 W3.5-01A-11
20 Bolt M8×45 4 GB/T5783-86
21 Bolt M10×70 4 GB/T5782-86 10.9
22 Right Cover, Header 1 W2.0-01-06-00
23 Bolt M8×55 2 GB/T5783-86
24 Washer 8 4 GB/T96-85
25 Washer 10 4 GB/T97.1-85
26 Washer 10 4 GB/T96-85

- 3 -
Header Assy

- 4 -
 Header Assy

NO. Description QTY Part Code Note

1 Reel Assy 1 W3.5-01A-01-05-00
2 Belt, Reel 1 W2.5E-01B-01-18
3 Cover, Small 1 W2.5E-01M-01-09
4 Bolt M8×20 6 GB/T5783-86
5 Nut M8 6 GB/T6170-86
6 Washer 8 10 GB/T93-87
7 Washer 8 16 GB/T97.1-85
8 Divider Assy ,Left Reel 1 W3.5H-01-01-08-00
9 Anti-straw Plate, Auger 2 L20.1-05
10 Bolt M6×16 8 GB/T5783-86
11 Nut M6 8 GB/T6170-86
12 Washer 6 8 GB/T93-87
13 Washer 6 8 GB/T97.1-85
14 Auger Assy ,Header 1 W2.5E-01D-01-02B-00
15 Frame Assy ,Header 1 W3.5-01A-01B-01-00
16 Cutter Assy 1 W2.5E-01H-01-03-00
17 Press Plate 3 W2.5E-01B-01-20
18 Divider Assy ,Right Reel 1 W3.5H-01-01-06-00
19 Transmission Assy ,Reel 1 W2.5E-01D-01-04-00
20 Baffle Weld 1 W2.5E-01B-01-50-00
21 Bolt M6×18 3 GB/T5783-86
22 Driving Assy , Cutting Blade 1 W3.5-01A-01-07-00
23 Pin Shaft B2×40 2 GB/T882-86
24 Washer 12 4 GB/T97.1-85
25 Pin 3.2×28 4 GB/T91-86
26 Belt, Header Auger 1 W3.5-01A-01-20
Tension Pulley, Transmission
27 Belt 1 W2.0-01-01-10-00
28 Tension Pulley Assy 1 W2.5E-01B-01-11-00
29 Chain 08B-1×100 1 GB/T1243.1-83
30 Connecting Plate Assy 1 W2.0-01-01-12-00
31 Pin Shaft B10×48 2 GB/T882-86
32 Washer 10 2 GB/T97.1-85
33 Nylon Sleeve A 4 W2.5E-01B-01-21
34 Nylon Sleeve B 2 W2.5E-01B-01-22

- 5 -
Reel Assy

- 6 -
 Reel Assy

NO. Description QTY Part Code Note

1 Stiffened Plate 15 W2.5E-01M-01-05-10
2 Bolt M8×70 30 GB/T5783-86
3 Washer 8 48 GB/T93-87
4 Eccentric Plate Weld 1 W2.5E-01M-01-05-02－00
5 Plate Weld 1 W2.5E-01M-01-05-01-00
6 Nylon Seat 15 W2.0B-01B-01-05Q-13
7 Reel Bar Assy Ⅰ 2 W2.5E-01H-01-05-06-00
8 Shaft Weld, Middle 1 W2.0B-01B-01-05D-17-00
9 Reel Bar Assy Ⅱ 3 W2.5E-01H-01-05-15-00
10 Bolt M12×30 6 GB/T5783-86
11 Washer 12 6 GB/T97.1-85
12 Washer 12 6 GB/T93-87
13 Nut M12 6 GB/T6170-86
14 Shaft Seat Assy ,Right 1 W2.0B-01B-01-05Q-03-00
15 Pulley Weld, Reel 1 W2.0-01-01-04-03-00
16 Key C8×32 1 GB/T1096-79
17 Retaining Ring 1 L1.8A-01-23-13
18 Retaining Ring 1 W2.0B-01B-01-05Q-16
19 Eccentric Plate, Adjusting 1 W2.0B-01B-01-05Q-11-00
20 Bolt M10×30 1 GB/T12-88
21 Washer 10, Big 1 GB/T96-85
22 Washer 10 1 GB/T93-87
23 Nut M10 1 GB/T6170-86
24 Eccentric Roller Assy 3 W2.0B-01B-01-05Q-12-00
25 Anti-straw Plate 1 W2.0B-01B-01-05-08
26 Hook 2 W.1.2-10
27 Spring Pin 2 W.1.2-11
28 Bolt M8×20 2 GB/T5783-86
29 Retaining Ring 1 WD.1FG.39-06
30 Sleeve, Wear Protection 4 W.1.2-12
31 Shaft Seat Weld, Left 1 W2.0B-01B-01-05Q-07-00
32 Sleeve 1 W2.0B-01B-01-05Q-25
33 Plate Weld, Left 1 W2.5E-01M-01-05-14-00
34 Plate, Anti-straw 6 W2.0B-01B-01-05Q-19
35 Press Plate 6 W2.0B-01B-01-05Q-20
36 Plate B, Anti-straw 6 W2.0B-01B-01-05Q-21 Tool Box
37 Washer 8 48 GB/T97.1-85
38 Bolt M8×25 18 GB/T5783-86
39 Nut M8 18 GB/T6170-86

- 7 -
Eccentric Roller Assy & Reel Pulley Assy

- 8 -
 Eccentric Roller Assy & Reel Pulley Assy

NO. Description QTY Part Code Note

1 Sleeve 1 WD.1E.2-03
2 Roller 1 W2.0B-01B-01-05Q-12-01
3 Retaining Ring for Bore 2 GB893.1-86
4 Roller Shaft 1 WD.1E.2-02
5 Bearing 6301-2RS 1 GB/T276-94
6 Washer 10 1 GB/T96-85
7 Washer 10 1 GB/T93-87
8 Nut M10 1 GB/T6170-86
9 Pulley Weld, Stamping 1 L1.8A-01-09-04-01-00
10 Hub 1 W2.0-01-01-04-03-01
11 Bolt M6X12 6 GB/T5783-86
12 Washer 6 6 GB/T93-87

- 9 -
Header Auger Assy (Header 2.2m )

- 10 -
 Header Auger Assy (Header 2.2m )

NO. Description QTY Part Code Note

1 Retaining Ring (2) 1 4L2.2-1.5-24
2 Bolt M12×25 1 GB/T5783-86
3 Washer 12 1 GB/T93-87
4 Pulley Assy 1 W2.5E-01B-01-02-03-00
5 Bearing Seat, Header Auger 1 W2.0-01-01-02-14
6 Bearing 6206-2RS 1 W2.5E-01B-01-02A-16
7 Seat Weld, Adjusting 1 W2.5E-01M-01-02-16-00
8 Nut M10 6 GB/T6170-86
9 Bolt M10×25 6 GB/T5783-86
10 Washer 10 12 GB/T93-87
11 Active Shaft Weld, Header Auger 1 W2.0B-01B-01-02-03-00
12 Circlip for Bore, 52 2 GB/T893.1-86
13 Bearing 6205-2RS 1 GB/T 276-94
14 Retaining Ring 1 W2.0-02-11-08
15 Bolt M8×20 2 GB/T5783-86
16 Washer 8 19 GB/T93-87
17 Guide Sleeve, Telescopic Teeth 10 W2.0-01-01-02A-11
18 Telescopic Tooth Assy 13 W2.0-01-01-02A-07-00
19 Radius Bar 1 W.1.4-06
20 Header Auger Weld 1 W2.5E-01D-01-02B-01-00
21 Bearing 90205 2 GB/T3882-87
22 Bearing Seat CY205 4 GB/T7809-87
23 Slider, Header Auger 1 WD.1.4-06
24 Adjustable Slider, Header Auger 1 CL1A.4-07
25 Press Plate (1) 1 4L2.2-1.5-23
26 Bolt M10×35 2 GB/T5783-86
27 Retaining Ring 1 QT004-2009
28 Key 8×28 1 GB/T1096-79
29 Bolt M10×40 1 GB/T5783-86
30 Pin 1 4L2.2-1.5-1
31 Eccentric Adjusting Shaft 1 W2.5E-01D-01-02A-13
32 Cover, Observe Hole 3 4LZ2.1.5-10
33 Bolt M6×20 32 GB/T5783-86
34 Washer 6 32 GB/T93-87
35 Washer 6 29 GB/T97.1-85
36 Pin Shaft 3 4LZ2.1.5-11
37 Cover Assy , Observe Hole, Long 1 W2.5E-01B-01-02B-02-00
38 Shaft, Telescopic Teeth 1 W2.5E-01B-01-02A-05
39 Radius Bar A 1 W2.0-01-01-02-04

- 11 -
Header Auger Assy (Header 2.2m )

- 12 -
 Header Auger Assy (Header 2.2m )

NO. Description QTY Part Code Note

40 Bolt M10×25 4 GB/T12-88
41 Plate 1 W2.0-01-01-02-15
42 Nut M6 20 GB/T6170-86
43 Sleeve 1 W2.0-01-01-02-12
44 Key C8×36 1 GB/T1096-79
45 Bolt M8×20 6 GB/T12-88
46 Washer 8 6 GB/T97.1-85
47 Nut M8 25 GB/T6170-86
48 Pin 3.2×20 1 GB/T91-86
49 Bolt M10×80 1 GB/T5783-86
50 Washer 6 3 GB/T96-85
51 Plate, Adjusting on demand W2.0-01-01-04G-10
52 Chain wheel demand
1 W2.0-01-01-02G-01-01
53 Pulley 1 W2.5E-01B-01-02-03-02
54 Bolt M8×25 6 GB/T70-85
55 Washer 8 6 GB/T93-87
56 Plate, Adjusting on demand W2.0-01-01-02G-01-03
57 Seat, Telescopic Teeth 1 W2.0-01-01-02-07-01
58 Rod, Telescopic Teeth 1 W2.0-01-01-02A-07-02
59 Pin 5×45 1 GB/T1220-84
Cover, Observe Hole,
60 Long 1 W2.5E-01B-01-02B-02-01
Guide Sleeve,Telescopic
61 Teeth 3 W2.0-01-01-02A-11
62 Bolt M6×20 6 GB/T5781-86
63 Washer 6 6 GB/T97.1-85
64 Nut M6 6 GB/T6170-86
65 Washer 6 6 GB/T93-87
66 Plate 2 W2.5E-01B-01-02C-19 Tool Box
67 Press Plate 2 W2.5E-01B-01-02C-21
68 Bolt M8×25 10 GB/T5783-86
69 Washer 8 10 GB/T96-85
70 Hub 1 W2.5E-01B-01-02-03-01

- 13 -
Cutter Assy (Header 2.2 m)

- 14 -
 Cutter Assy(Header 2.2 m )

NO. Description QTY Part Code Note

1 Blade Guide A 1 W2.0-01-01-03G-01
2 Conveyor Teeth, Left 1 W2.0-01-01-03G-18
3 Bar, Blade Fixed 1 W2.0B-01B-01-03G-02
4 Cutter Bar Assy , Blade Fixed 1 W2.5E-01D-01-03-03-00A
5 Bolt M10×30 18 GB/T12-88
6 Washer 10 37 GB/T93-87
7 Nut M10 30 GB/T6170-86
8 Conveyor Teeth, Right 1 W2.5E-01D-01-03-01
9 Blade Guide B 14 W2.0-01-01-03G-04
10 Bolt M8×18 5 GB/T5783-86
11 Washer 8 9 GB/T97.1-85
12 Washer 8 7 GB/T93-87
13 Nut M8 7 GB/T6170-86
14 Washer 10 7 GB/T96-85
15 Bolt M10×25 7 GB/T5783-86
16 Bolt M8×20 2 GB/T5783-86
17 Friction Plate 1 W2.0-01-01-03G-06
18 Plate 2 W2.0-01-01-03-05
19 Plate, Adjusting W2.0-01-01-03G-07
20 Bolt M10×50 2 GB/T12-88
21 Friction Plate 6 W2.0-01-01-03G-08
22 Press Plate 1 W2.0-01-01-03G-09
23 Bolt M10×35 10 GB/T12-88
24 Plate, Blade Pressed 5 W2.0-01-01-03G-10

- 15 -
Reel Transmission Assy

- 16 -
 Reel Transmission Assy

NO. Description QTY Part Code Note

Reel Pulley Assy ,Speed
1 Changing 1 W2.0-01-01-04G-01-00
2 Bearing 6205-2RS 2 GB/T276-94
3 Key C8×25 1 GB/T1096-79
4 Bolt M8×20 2 GB/T5783-86
5 Washer 8 4 GB/T93-87
6 Retaining Ring 2 W2.0-02-11-08
7 Circlip for Bore, 52 2 GB/T893.1-86
8 Shaft Weld, Frame 1 W2.0-01-01-04-04-00
9 Tension Arm Assy 1 W2.5E-01B-01-04-08-00
10 Spring 1 W2.5E-01B-01-04-09
11 Pin 1 XSS46-06
12 Screw Rod 1 W2.5E-01B-01-04-05A
13 Shaft 1 W2.5E-01B-01-04-03
14 Washer 12 1 GB/T96-85
15 Fixed Seat Weld, Front 1 W2.5E-01B-01-04-03-00
16 Bolt M10×50 1 GB/T5782-86
17 Washer 10 1 GB/T97.1-85
18 Washer 10 1 GB/T93-87
19 Nut M10 1 GB/T6170-86
20 Frame Assy ,Support 1 W2.5E-01D-01-04-02-00
21 Key C8×32 1 GB/T1096-79
22 Plate, Adjusting on demand W2.0-01-01-04G-10
23 Reel Pulley 1 W2.0-01-01-04-03-00
24 Fixed Seat Weld, Rear 1 W2.5E-01B-01-04-04-00
25 Bolt M8×50 2 GB/T5782-86
26 Washer 8 2 GB/T96-85
27 Washer 10 1 GB/T96-85
28 Nut M8 2 GB/T6170-86
29 Auxiliary Shift Plate 1 W2.0-01-01-04G-01-01
30 Bolt M8×35 4 GB/T5783-86
31 Washer M8 4 GB/T93-87
32 Washer M8 4 GB/T97.1-85
33 Fixed Plate 1 W2.0-01-01-04G-01-02G
34 Plate, Adjusting 4 W2.0-01-01-04G-01-03
35 Tension Pulley, Movable 2 W2.0-01-01-04G-07-02
36 Bearing 6204-2RS 2 GB/T276-94
37 Tension Arm Weld 1 W2.5E-01B-01-04-08A-01-00
38 Circlip for Shaft, 20 2 GB/T894.2-86
39 Circlip for Bore, 47 2 GB/T893.1-86

- 17 -
Reel Transmission Assy

- 18 -
 Reel Transmission Assy

NO. Description QTY Part Code Note

40 Shaft 1 W2.5E-01B-01-04-08A-02
41 Washer 12 1 GB/T93-87
42 Nut M12 1 GB/T6170-86
43 Washer 12 1 GB/T97.1-85
44 Pulley Weld, Stamping 1 L1.8A-01-09-04-01-00
45 Bolt M6X12 6 GB/T5783-86
46 Washer 6 6 GB/T93-87
47 Hub 1 W2.0-01-01-04-03-01

- 19 -
Blade Driving Assy

- 20 -
 Blade Driving Assy

NO. Description QTY Part Code Note

Swing Rod Assy ,Upper
1 Blade 1 W2.0-01-01-07-01-00
2 Press Plate 2 W2.0-01-01-07-03
3 Bolt M12×25 1 GB/T5783-86
4 Washer 12 1 GB/T93-87
5 Press Plate (II) 1 W2.0-01-01-07-04
6 Bearing 1 W2.0-01-01-07-05-00
7 Joint Bar Weld, Upper Blade 1 W2.0-01-01-07-06-00
8 Swing Rod Assy 1 W3.5-01A-01-07-02-00
9 Bolt M10×30 4 GB/T5783-86
10 Washer 10 4 GB/T93-87
11 Bearing 1205 1 W2.0-01-01-07-12
12 Circlip for Bore 52 2 GB/T893.1-86
13 Oil Cup M6 1 GB/T1152-89
14 Dust Proof cover 1 W2.0-01-01-07-07
15 Circlip for Shaft, 25 1 GB/T894.2-86
16 Sleeve 1 W.1.5B-08
17 Throat Hoop ø25-40 1 JB/T8870-1999
18 Plate, Adjusting on demand W2.0-01-01-07-08
19 Bearing 6203-2RS 2 W2.0-01-01-07-01-10
20 Mud Proof Cover 1 W2.0-01-01-07-01-08
21 Circlip for Shaft 17 1 GB/T894.2-86
22 Washer 12 2 GB/T93-87
23 Washer 12 2 GB/T97.1-85
24 Nut 12 2 GB/T6170-86
25 Pin Shaft 1 W2.0-01-01-07-01-09
26 Shaft 1 W2.0-01-01-07-01-03
27 Dust Proof cover 1 W2.0-01-01-07-01-04
28 Circlip for Bore 47 2 GB/T893.1-86
29 Bearing 6204-RS 2 GB/T276-94
30 Nut M18X1.5 1 GB6173-86
31 Middle Gasket 1 W2.0-01-01-07-01-05
32 Sleeve 1 W2.0-01-01-07-01-06
33 Swing Shaft 1 W2.0-01-01-07-01-01
34 Swing Rod, Upper Blade 1 W2.0-01-01-07-01-02
35 Sleeve 1 W2.0-01-01-07-01-07
36 Bolt M12×25 2 GB/T5783-86
37 Washer 12 6 GB/T93-87
38 Press Plate 1 W2.0-01-01-07-02-01
39 Eccentric Crank Weld 1 W2.5E-01B-01-07-02-02A-00

- 21 -
Blade Driving Assy

- 22 -
 Blade Driving Assy

NO. Description QTY Part Code Note

40 Key A8×45 1 GB/T1096-79
41 Crank Seat 1 W2.5E-01B-01-07-02-02A-01
42 Transmission Chain Wheel 1 W2.5E-01B-01-07-02-02A-02
43 Bearing UCP206 2 W2.0-01-01-07-02-08
44 Driven Pulley, Conveyor 1 W2.0-01-01-07-02-03
45 Key C8×40 1 GB/T1096-79
46 Press Plate 1 W2.0-01-01-07-02-04
47 Bolt M12×40 4 GB/T5783-86
48 Washer 12 4 GB/T97.1-85
49 Shaft, Swing Rod 1 W2.5E-01D-01-07-02-05A
50 Sleeve 1 W2.5E-01H-01-07-02-01

- 23 -
Header Transmission Tension Pulley and Chain Tension Pulley Assy

- 24 -
 Header Transmission Tension Pulley and Chain Tension Pulley Assy

NO. Description QTY Part Code Note

1 Tension Pulley 1 W2.0-01-01-04-07-02
2 Circlip for Bore 47 1 GB/T893.1-86
3 Circlip for Shaft 20 1 GB/T894.2-86
4 Shaft, Tension Pulley 1 W2.0-01-01-10-01
5 Bearing 6204-2RS 1 GB/T276-94
6 Nut 1 W2.0-01-01-10-02
7 Plate, Adjusting on demand W.1.13-02
8 Bolt M12×50 1 GB/T12-88
9 Sleeve 1 W2.5E-01B-01-11-02
10 Bearing 6204-2RS 1 GB/T276-94
11 Retaining Ring for Bore 47 2 GB/T893.1-86
12 Nut M12 1 GB/T6170-86
13 Washer 12 1 GB/T93-87
14 Washer 12 1 GB/T97.1-85
15 Nylon Tension Pulley 1 WD.1F.33-02
16 Plate, Adjusting on demand W2.0-01-01-11-03
17 Gasket 1 W2.5E-01B-01-11-03

- 25 -
Header Divider Assy , Left & Right

- 26 -
 Header Divider Assy , Left & Right

NO. Description QTY Part Code Note

1 Divider Weld, Left 1 W2.5E-01M-01-08E-01-00
Divider Pipe Assy ,
2 Movable 1 W2.5E-01M-01-08X-03A-00
3 Baffle Plate 1 W2.5E-01M-01-08-02A
4 Bolt M8X65 1 GB/T5783-86
5 Washer 8 3 GB/T96-85
6 Washer 8 6 GB/T93-87
7 Nut M8 2 GB/T6170-86
8 Bolt M10X30 5 GB/T5783-86
9 Washer 10 8 GB/T93-87
10 Washer 10 5 GB/T97.1-85
11 Nut M10 3 GB/T6170-86
12 Bolt M8X20 2 GB/T5783-86
13 Bolt M8X30 1 GB/T5783-86
14 Support Plate 1 W3.5H-01-01-06-02
15 Bolt M10X20 1 GB/T5783-86
16 Washer M8 3 GB/T97.1-85
17 Washer M10 4 GB/T96-85
Divider Pipe Assy ,
18 Movable 1 W2.5E-01M-01-08X-03A-01-00
19 Spring 1 L20.1.2-01
20 Nut M10 2 GB/T6170-86
21 Washer 10 2 GB/T97.1-85
22 Divider Weld, Right 1 W2.5E-01M-01-06E-01-00
23 Support Plate 1 W3.5H-01-01-06-02
24 Bolt M10X30 3 GB/T5783-86
25 Washer 10 4 GB/T93-87
26 Washer 10 2 GB/T96-85
27 Nut M10 1 GB/T6170-86
28 Bolt M8X65 1 GB/T5782-86
29 Washer 8 4 GB/T96-85
30 Washer 8 8 GB/T93-87
31 Nut M8 4 GB/T6170-86
32 Washer 8 4 GB/T97.1-86
33 Bolt M8X25 2 GB/T5783-86
34 Bolt M10X20 1 GB/T5783-86
35 Washer 10 3 GB/T97.1-86
36 Bolt M8X30 1 GB/T5783-86

- 27 -
Conveyor Assy

- 28 -
 Conveyor Assy

NO. Description QTY Part Code Note

1 Conveyor Weld 1 W3.5H-01-02-01-00
2 Upper Cover 1 W2.5E-01B-02-03A
3 Tension Pulley Assy 1 W2.5E-01M-02S-05-00
4 Bolt 8 W2.5E-01B-02-37
5 Conveyor Chain Assy 1 W3.5-01A-02-09-00
6 Cover Weld 1 W3.5H-01-02-10-00
7 Upper Cover B 1 W2.5E-01B-02Y-08
8 Washer 16 2 GB/T93-87
9 Shaft Sleeve 2 W2.5E-01B-02-40
10 Belt, Conveyor 2 W3.5H-01-02-11
11 Canvas 1 W2.5-01-02-17
12 Long Canvas 1 W2.5E-01B-02-12
13 Press Plate 1 W2.5-01-02-18
14 Washer 8 20 GB/T93-87
15 Nut M8 4 GB/T6170-86
16 Pin 1 XSS46-06
17 Lock Assy ,Oil Cylinder 1 W2.5E-01-02-19-00
18 Pin Shaft B16×65 1 GB/T882-86
19 Pin Shaft B16×75 1 GB/T882-86
20 Washer 16 2 GB/T96-85
21 Pin 4×30 2 GB/T91-86
22 Driven Wheel Assy 1 W2.5E-01B-02Y-02-00
23 Hose Clamp 4 W2.5E-01B-28
24 Bolt M8×20 12 GB/T5783-86
25 Bolt M8×25 4 GB/T5783-86
26 Driving Wheel, Right 1 W2.5DA-01-02-04-00
27 Key C8×36 1 GB/T1096-79
28 Nut M16×1.5 2 GB/T6176-86
29 Retaining Ring for Bore 2 GB/T893.1-86
30 Bearing 6206-2RS 2 W2.5E-01B-02-16
31 Dust Proof Washer 2 W2.5-01-02-24
32 Baffle Plate 2 W2.5E-01B-02-25
33 Washer ,Plain, Big, 8 8 GB/T96-85
34 Bolt, Tighten 2 W2.5-01G-02-26
35 Nut M10×1 2 GB/T6173-86
36 Upper Shaft 1 W2.5E-01B-02-05Y
37 Sleeve Weld 2 W2.5E-01B-02-06-00
38 Bolt M8×16 4 GB/T67-85
39 Key A12×40 2 GB/T1096-79

- 29 -
Conveyor Assy

- 30 -
 Conveyor Assy

NO. Description QTY Part Code Note

40 Chain Wheel , Conveyor 2 W2.5E-01B-02-04Y
41 Driving Wheel A, Header 1 W2.5E-01B-02-07
42 Plate, Adjusting on demand W2.5-02-56-07-22
43 Plate on demand W2.5-02G-02-10-01-05
44 Key A8×50 1 GB/T1096-79
45 Driving Hub, Left 1 W2.5E-01B-02-38X
46 Belt Pulley, Upper Shaft 1 W2.5E-01B-02-32
47 Washer 8 4 GB/T97.1-85
48 Bolt M10×70 6 GB/T5782-86
49 Washer 10 6 GB/T93-87
50 Retaining Ring 2 W2.5-01-02-12
51 Conveyor Chain C2060-84 2 W3.5-01A-02-09-01
52 Plate, Hanging 14 W2.5E-01B-02-09B-02
53 Bolt M10×20×1.25 56 GB/T5786-86
54 Washer 10 56 76GB/T93-87
55 Nut 10×1.25 56 GB/T6171-86

- 31 -
Conveyor Tension Pulley Assy

- 32 -
 Conveyor Tension Pulley Assy

NO. Description QTY Part Code Note

1 Tension Pulley Assy 1 W2.5K-02SA-09A-01-00
2 Washer 8 2 GB/T93-87
3 Spring 1 W2.0-01-02-05-01
4 Nut M10 2 GB/T6170-86
5 Screw Rod 1 W2.5E-01M-02S-05-05
6 Circlip for Bore 2 GB/T893.1-86
7 Shaft Sleeve 1 W2.0-02-16-01-03
8 Bolt M8×20 2 GB/T5783-86
9 Retaining Ring 2 W2.0-02-17-03
10 Frame Assy , Tension Pulley 1 W2.5E-01M-02S-05-02-00
11 Bearing 6204-RS 2 GB/T276-94
12 Tension Pulley 1 W2.0-01-02-05-03

- 33 -
Conveyor Driven Wheel Assy

- 34 -
 Conveyor Driven Wheel Assy

NO. Description QTY Part Code Note

1 Support Arm Assy 2 W2.5E-01B-02-02-01-00
2 Nut M12 8 GB/T6170-86
3 Washer 12 4 GB/T93-87
4 Retaining Ring for Bore 52 2 GB/T893.1-86
5 Bearing 6205-2RS 2 GB/T276-94
6 Shaft, Driven Wheel 1 W2.5E-01B-02-02-02
7 Driven Wheel Weld 1 W2.5E-01B-02-02-03-00
8 Bolt Assy , Adjusting 2 W2.5E-01B-02Y-02-03-00
9 Leakage-proof Plate 2 W2.5E-01B-02Y-02-06
10 Short Shaft 2 W2.5E-01B-02Y-02-04A
11 Washer 12 2 GB/T97.1-85
12 Retaining Ring 2 W2.5E-01B-02Y-02-05

- 35 -
Ⅱ. Thresher Part

- 36 -
Thresher Assy(Canopy )

- 37 -
 Thresher Assy (Canopy )

NO. Description QTY Part Code Note

1 Frame Weld, Threshing 1 W2.5K-02PE-01-00
2 Thresher Cylinder Assy 1 W2.5K-02S-02-00
3 Side Cover, Support 1 W2.5P-02-01-15-00
4 Press Plate 1 W2.5-02-01-20
5 Dust Proof Plate 1 W2.5-02-01-21
6 Active Tension Assy 1 W2.5K-02SA-09A-00
7 Inlet Assy , Left 1 W2.5-02G-01-05B-00
8 Inlet Assy , Right 1 W2.5-02G-01-03B-00
9 Press Plate 1 W2.5-02-01-23
10 Canvas, Front 1 W2.5-02-01-24
11 Concave Grid Assy , Front 2 W3.5H-02-04-00
12 Concave Grid Assy , Rear 2 W3.5H-02-06-00
13 Support Plate, Straw Outlet 1 W2.5-02G-01-16-00
14 Thresher Cover Assy 1 W2.5K-02PE-07-00
15 Air Brake 1 W2.5-02G-01-40
16 Cover Plate Assy 1 W2.5K-02P-08-00
17 Screw Rod 3 W2.5-02-01-33A
18 Cover Plate, Right 1 W2.5K-02S-27
19 Bolt M8×16 1 GB5783-86
Gearbox Assy , Double
20 Transmission 1 W2.5K-02P-17A-00 2SBType1496Belt Only
21 Frame Weld, Cover 4 W2.5P-02-01-11-00
22 Gasket, Seal 2 W2.5-02-01-29
23 Plate, Protecting 1 W2.5-02-01-13-00
24 Bolt 1 W2.0-01-02-07-00
25 Bolt M8×20 40 GB5783-86
26 Washer, Plain, Big 50 GB96-85
27 Washer 8 80 GB93-87
28 Nut M8 4 GB6170-86
29 Washer 10 2 GB97.1-85
30 Pin 2 XSS46-06
31 Washer 12 19 GB97.1-85
32 Washer 12 21 GB93-87
33 Bolt M12×40×1.25 4 GB5786-86
34 Bolt M10×25 20 GB5783-86
35 Washer 10 24 GB93-87
36 Washer, Plain 22 WD-150.01.26.01
37 Rod, Support 1 W2.5-02-01-32
38 Belt, C Type, Gearbox, Fan 2 W2.5-02S-01-36
39 Belt, 2SB, Upper Shaft, Gearbox 1 W2.5-02S-01A-37 2SBType1496Belt Only
40 SB Belt 1 W2.5-02S-01-38
- 38 -
Thresher Assy (Canopy )

- 39 -
 Thresher Assy (Canopy )

NO. Description QTY Part Code Note

41 Bolt M6×20 13 GB5783-86
42 Washer 6 3 GB96-85
43 Washer 6 38 GB93-87
44 Nut M12 2 GB6171-86
45 Baffle Plate 1 W2.5-02G-01-41S
46 Washer 6 23 GB97.1-85
47 Nut M6 25 GB6170-86
48 Nut M10 22 GB6170-86
49 Guide Plate, Swing Sieve 2 W2.5-02-02-02
50 Fan Assy 1 W2.5P-02-02-05-00
51 Plate Weld 1 W2.5K-02PD-04-00
52 Plate Weld 1 W2.5K-02PD-03-00
53 Impurity Assy 1 W3.5H-02-11-00
54 Vibrate Sieve Assy 1 W2.5-02G-02-13B-00
55 Transmission Belt, Sieve Box 1 W2.5K-02PA-02-37
56 Tension Pulley Assy 1 W2.5P-02-02-12-00
57 Transmission Belt, Auger, Fan 1 W2.5C-02S-02-36 Bando
58 Tension Assy , Main Clutch 1 W2.5C-02-02-22C-00
59 Cover Plate, Left 1 W2.5-02-02-28
60 Bolt M8×25 18 GB5783-86
61 Bottom Plate Weld 1 W2.5K-02PC-06-00
62 Bottom Plate, Impurity 1 W2.5-02-02-07
63 Cover Plate, Right 1 W2.5-02-02-08
64 Plate, Adjusting, Fan, Left 1 W2.5-02-02-24-00
65 Plate, Adjusting, Fan, Right 1 W2.5-02-02-23-00
66 Cover Plate, Shaking, Right 1 W2.5P-02-02-18
67 Bolt M6×12 4 GB5783-86
68 Plate, Screw Rod Box 1 W2.5-02-02-14
69 Gasket, Seal 2 1 W2.5-02-02-15
70 Plate, Screw Rod Box 1 W2.5-02-02-16
71 Frame Assy , Support 1 W3.5-02A-26-00 2SB Type1496BeltOnly
72 Sponge, Seal 4 W2.5-02-02-32
73 Cover Assy , Left, Front, Upper 1 W2.5P-02-20-00
75 Cover Assy , Front 1 W2.5P-02-24-00
76 Cover Assy , Left, Rear 1 W2.5K-02PA-25-00
77 Cover Assy , Lower, Rear 1 W2.5-02-23A-00
78 Cover Assy , Rear 1 W2.5-02-21-00
79 Bolt M8×18 8 GB5783-86
80 Bolt M10×30 1 GB5783-86

- 40 -
Thresher Assy (Canopy )

- 41 -
 Thresher Assy (Canopy )

NO. Description QTY Part Code Note

81 Bolt M10×85 1 GB5782-86
82 Frame, Turn Signal, Left, Rear 1 W2.5-02-10
83 bracket
Plate, Adjusting on demand W2.5-02-11
84 Bolt M8×25×1 6 GB5786-86
85 Pin Shaft-BType10X95 3 GB882-86
86 Pin 2.5X20 3 GB91-86
87 Bolt M12X80 2 GB5782-86
88 Plate 1 W2.5K-02SA-14
89 Buckle Seat Weld 1 W2.5K-02PA-40-00
90 Oil cup M8×1 2 GB/T1152-89
91 Washer 12 2 GB96-85
92 Guide Plate, Front 1 W2.5K-02PD-05
93 Guide Plate, Rear 1 W2.5K-02PD-06
94 Bolt M6×16 5 GB5783-86
95 Sponge, Seal 1 W2.5K-02PD-07
96 Stopper, Left 1 W2.5K-02PD-08
97 Stopper, Right 1 W2.5K-02PD-09
98 Gasket, Seal 2 W2.5K-02PD-10
99 Bolt M6×18 8 GB5783-86
100 Bolt M12×35×1.25 2 GB5786-86
101 Cover Assy , Threshing Cylinder 1 W2.5K-02PF-07-00 Optional
102 Dust Proof Ring on demand W2.5DA-07-06-03-05
103 Plate on demand W2.5K-02SA-15
104 Connecting Seat Assy , Cover 1 W2.5K-02PD-11-00
105 Reflector 1 W2.5K-02PD-57
106 Reflector Seat 1 W2.5K-02PD-56
107 Washer 8 2 GB97.1-85
108 Grain Auger Assy. 1 W3.5H-02-10-00
109 Washer, Plain 10 3 GB97.1-85
Belt, SC Type, Upper Shaft,
110 Gearbox 1 W2.5-02S-01-37 SCType1465BeltOnly
Gearbox Assy ,Double
111 Transmission 1 W2.5K-02P-17-00 SCType1465BeltOnly
112 Frame Assy , Support 1 W2.5K-02PD-25-00 SCType1465BeltOnly
113 Frame Weld, Threshing 1 W2.5K-02PD-01-00 Sack Type
114 Grain Auger Assy 1 W2.5K-02PB-10C-00 Sack Type

- 42 -
Thresher Assy (Cabin)

- 43 -
 Thresher Assy (Cabin)

NO. Description QTY Part Code Note

1 Frame Weld, Threshing 1 W2.5K-02PE-01-00
2 Threshing Cylinder Assy 1 W2.5K-02S-02-00
3 Side Cover, Frame 1 W2.5P-02-01-15-00
4 Press Plate 1 W2.5-02-01-20
5 Dust Proof Plate 1 W2.5-02-01-21
6 Active Tension Assy 1 W2.5K-02SA-09A-00
7 Inlet Weld, Left 1 W2.5-02G-01-05B-00
8 Inlet Weld, Right 1 W2.5-02G-01-03B-00
9 Press Plate 1 W2.5-02-01-23
10 Canvas, Front 1 W2.5-02-01-24
11 Concave Grid Assy , Front 2 W3.5H-02-04-00
12 Concave Grid Assy , Rear 2 W3.5H-02-06-00
13 Support Plate, Straw Outlet 1 W2.5-02G-01-16-00
14 Thresher Cover Assy 1 W2.5K-02PE-07-00 Optional
15 Air brake 1 W2.5-02G-01-40
16 Cover Plate Assy 1 W2.5K-02P-08-00
17 Screw Rod 3 W2.5-02-01-33A
Gearbox Assy ,
20 Double Transmission 1 W2.5K-02P-17A-00 2SB Type1496Belt Only
21 Frame Weld, Cover 4 W2.5P-02-01-11-00
22 Gasket, Seal 2 W2.5-02-01-29
23 Plate, Protecting 1 W2.5-02-01-13-00
24 Bolt 1 W2.0-01-02-07-00
25 Bolt M8×20 40 GB5783-86
26 Washer, Plain, Big 8 50 GB96-85
27 Washer 8 80 GB93-87
28 Nut M8 4 GB6170-86
29 Washer 10 2 GB97.1-85
30 Pin 2 XSS46-06
31 Washer 12 19 GB97.1-85
32 Washer 12 21 GB93-87
33 Bolt M12×40×1.25 4 GB5786-86
34 Bolt M10×25 20 GB5783-86
35 Washer 10 24 GB93-87
36 Washer, Plain 22 WD-150.01.26.01
37 Rod, Support 1 W2.5-02-01-32
38 Belt, C Type, Gearbox, Fan 2 W2.5-02S-01-36
39 Belt, 2SB, Upper Shaft, Gearbox 1 W2.5-02S-01A-37 2SBType1496Belt Only
40 SB Belt 1 W2.5-02S-01-38
41 Bolt M6×20 13 GB5783-86
42 Washer 6 3 GB96-85
- 44 -
Thresher Assy (Cabin)

- 45 -
 Thresher Assy (Cabin)

NO. Description QTY Part Code Note

43 Washer 6 38 GB93-87
44 Nut M12 2 GB6171-86
45 Baffle Plate 1 W2.5-02G-01-41S
46 Washer 6 23 GB97.1-85
47 Nut M6 25 GB6170-86
48 Nut M10 22 GB6170-86
49 Guide Plate, Swing Sieve 2 W2.5-02-02-02
50 Fan Assy 1 W2.5P-02-02-05-00
51 Plate Weld 1 W2.5K-02PD-04-00
52 Plate Weld 1 W2.5K-02PD-03-00
53 Impurity Assy 1 W3.5H-02-11-00
54 Vibrate Sieve Assy 1 W2.5-02G-02-13B-00
55 Transmission Belt, Sieve Box 1 W2.5K-02PA-02-37
56 Tension Pulley Assy 1 W2.5P-02-02-12-00
57 Transmission Belt, Auger, Fan 1 W2.5C-02S-02-36 Bando
58 Tension Assy , Main Clutch 1 W2.5C-02-02-22E-00
59 Cover Plate, Left 1 W2.5-02-02-28
60 Bolt M8×25 18 GB5783-86
61 Bottom Plate Weld 1 W2.5K-02PC-06-00
62 Bottom Seat, Impurity 1 W2.5-02-02-07
63 Cover Plate, Right 1 W2.5-02-02-08
64 Plate, Adjusting, Fan, Left 1 W2.5-02-02-24-00
65 Plate, Adjusting, Fan, Right 1 W2.5-02-02-23-00
66 Cover Plate, Shaking, Right 1 W2.5P-02-02-18
67 Bolt M6×12 4 GB5783-86
68 Plate, Screw Rod Box 1 W2.5-02-02-14
69 Gasket, Seal 2 1 W2.5-02-02-15
70 Plate, Screw Rod Box 1 W2.5-02-02-16
71 Frame Assy , Support 1 W3.5-02A-26-00 2SBType1496BeltOnly
72 Sponge, Seal 4 W2.5-02-02-32
73 Cover Assy , Left, Front, Upper 1 W2.5P-02-20-00
74 Cover Assy , Transmission Box 1 W2.5K-02PD-22-00
75 Cover Assy , Front 1 W2.5P-02-24-00
76 Cover Assy , Left, Rear 1 W2.5K-02PA-25-00
77 Cover Assy , Lower, Rear 1 W2.5-02-23A-00
78 Cover Assy , Rear 1 W2.5-02-21-00
79 Bolt M8×18 8 GB5783-86
80 Bolt M10×30 1 GB5783-86
81 Bolt M10×85 1 GB5782-86
82 Frame, Turn Signal, Left, Rear 1 W2.5-02-10
bracket
- 46 -
Thresher Assy (Cabin)

- 47 -
 Thresher Assy (Cabin)

NO. Description QTY Part Code Note

83 Gasket, Adjusting on demand W2.5-02-11
84 Bolt M8×25×1 6 GB5786-86
85 Pin Shaft-B Type 10X95 3 GB882-86
86 Pin2.5X20 3 GB91-86
87 Bolt M12X80 2 GB5782-86
88 Plate 1 W2.5K-02SA-14
89 Buckle Seat Weld 1 W2.5K-02PA-40-00
90 Oil Cup M8×1 2 GB/T1152-89
91 Washer 12 2 GB96-85
92 Guide Plate, Front 1 W2.5K-02PD-05
93 Guide Plate, Rear 1 W2.5K-02PD-06
94 Bolt M6×16 5 GB5783-86
95 Sponge, Seal 1 W2.5K-02PD-07
96 Left stopper 1 W2.5K-02PD-08
97 Right stopper 1 W2.5K-02PD-09
98 Gasket, Seal 2 W2.5K-02PD-10
99 Bolt M6×18 8 GB5783-86
100 Bolt M12×35×1.25 2 GB5786-86
101 Cover Assy , Threshing Cylinder 1 W2.5K-02PF-07-00
102 Dust Proof Ring on demand W2.5DA-07-06-03-05
103 Plate on demand W2.5K-02SA-15
104 Connecting Seat Weld, Cover 1 W2.5K-02PD-11-00
105 Reflector 1 W2.5K-02PD-57
106 Reflector Seat 1 W2.5K-02PD-56
107 Washer 8 2 GB97.1-85
108 Grain Auger Assy. 1 W3.5H-02-10-00
109 109 Spacer
Washer, Plain 10 3 GB97.1-85
Belt, SC Type, Upper Shaft,
110 Gearbox 1 W2.5-02S-01-37 SCType1465BeltOnly
Gearbox Assy ,Double
111 Transmission 1 W2.5K-02P-17-00 SCType1465BeltOnly
112 Frame Assy , Support 1 W2.5K-02PD-25-00 SCType1465BeltOnly
113 Rod Assy , Support 1 W2.5K-02PF-10-00 Adjustable Cabine Type

- 48 -
Threshing Cylinder

- 49 -
 Threshing Cylinder

NO. Description QTY Part Code Note

1 Shaft Weld 1 W2.5K-02S-02-01-00
2 Feeding Auger 1 W2.5K-02S-02-02-00A
3 Bolt M10×30×1.25 12 GB5786-86 10.9
4 Beat Bar Weld A 3 W2.5K-02S-02-03-00
5 Beat Bar Weld B 3 W2.5K-02S-02-04-00
6 Spider Assy , Front 1 W2.5-02-01-02-05-00
7 Bearing 6210-2RS 1 W2.5-02S-01-02-20
8 Retaining Ring for Shaft 50 1 GB894.1-86
9 Spider Weld, Rear 1 W2.5-02-01-02-06-00
10 Bearing Seat, Rear 1 W2.5-02-01-02-12
11 Bearing 6307-2RS 1 W2.5-02S-01-02-21
12 Retaining Ring for Bore 80 1 GB893.1-86
13 Retaining Ring 1 W2.5-02-01-02-13
14 Bolt M16×35×1.5 1 GB5786-86
15 Washer 16 1 GB93-87
16 Bolt M10×25×1.25 54 GB5786-86 10.9
17 Bolt M10×35×1.25 4 GB5786-86
18 Washer 10 70 GB93-87
19 Washer, Plain, Big 10 66 GB96-85
20 Balance Block 1 on demand W2.5-02G-01-02-14
21 Balance Block 2 on demand W2.5-02G-01-02-15
22 Balance Block 3 on demand W2.5-02G-01-02-16
23 Balance Block 4 on demand W2.5-02G-01-02-17
24 Balance Block 5 on demand W2.5-02G-01-02-18
25 Balance Block 6 on demand W2.5-02G-01-02-19
26 Nut M10x1.25 24 GB/T6171-86

- 50 -
Main Tension Assy

- 51 -
 Main Tension Assy

NO. Description QTY Part Code Note

1 Tension Arm Weld 1 W2.5K-02SA-09A-02-00
2 Retaining Ring 22 1 GB/T894.1-86
3 Washer 1 W2.5-02-01-14-02
4 Bearing (1620) 2 W2.5-02-01-14-05
5 Nut M8 2 GB/T6170-86
6 Tension Bolt 1 W2.5K-02S-09-01
7 Spring, Thresher 1 W2.5-02-02-10-08A
8 Oil Cup M6 1 GB/T1152-89
9 Bolt M6×12 8 GB5783-86
10 Sleeve 1 W2.5K-02SA-09A-01-02
11 Bearing 6204-2RS 2 GB276-1994
12 Tension Pulley 2 W2.5K-02SA-09A-01-01
13 Washer 6 8 GB93-87
14 Nut M6 8 GB6170-86
15 Retaining Ring 20 1 GB/T894.1-86

- 52 -
Threshing Cover Assy (Round)

- 53 -
 Threshing Cover Assy (Round)

NO. Description QTY Part Code Note

1 Cylinder Cover Weld 1 W2.5K-02PE-07-01-00

2 Gasket, Seal A 2 W2.5-02G-01-07-03
3 Gasket, Seal B 2 W2.5-02G-01-07-04
4 Bolt M6X16 2 GB/T5783-86
5 Washer 6 2 GB/T93-87
6 Washer 6 2 GB/T96-85

- 54 -
Threshing Cover Assy (Adjustable)

- 55 -
 Threshing Cover Assy (Adjustable)

NO. Description QTY Part Code Note

1 Cylinder Cover Weld 1 W2.5K-02PF-07-01-00
2 Plate Assy , Straw Guide 1 W2.5K-02PD-07-02-00
3 Gasket, Seal A 2 W2.5-02G-01-07-03
4 Gasket, Seal B 2 W2.5-02G-01-07-04

- 56 -
Straw Guide Plate

- 57 -
 Straw Guide Plate

NO. Description QTY Part Code Note

1 Plate Weld, Straw Guide A 8 W2.5K-02PD-07-02-02-00
2 Plate Weld, Straw Guide B 1 W2.5K-02PD-07-02-03-00
3 Handle Weld, Adjusting 1 W2.5K-02PD-07-02-05-00
4 Plate 10 19 GB96-85
5 Nut M10 18 GB/T6170-86
6 Washer 10 19 GB/T93-87
7 Sleeve 1 W2.5K-02PD-07-02-06
8 Connecting Plate 1 W2.5K-02PD-07-02-04
9 Bolt M8X20 1 GB/T5783-86
10 Sleeve 1 W2.5K-02PD-07-02-07

- 58 -
Cover Plate Assy

- 59 -
 Cover Plate Assy

NO. Description QTY Part Code Note

1 Cover Plate Weld, Open/Close 1 W2.5K-02P-08-01-00
2 Plate, Open/Close 1 W2.5K-02P-08-02-00
3 Bolt M6X16 18 GB/T5783-86
4 Washer 6 16 GB/T93-86
5 Washer 6 14 GB/T97.1-86
6 Buckle 1 WD.2MA.73-02
7 Seal Strip A 2 W2.5-02G-01-08-03
8 Seal Strip B 2 W2.5-02G-01-08-04
9 Nut M6 6 GB6170-86
10 Seal Strip 1 W2.5K-02P-08-03

- 60 -
Double Transmission Gearbox Assy (2SB Type1465 Belt Only)

- 61 -
 Double Transmission Gearbox Assy (2SB Type1465 Belt Only)

NO. Description QTY Part Code Note

1 Retaining Ring 17-45 2 W2.5-02A-01-17-04
2 Gasket 16 2 GB/T93-87
3 Nut M16×1.5 2 GB/T6171-86
4 Pulley, Auxiliary 1 W2.5K-02P-01A-17-04 2SBType1465 Belt Only
6 Oil Seal 40×90×10 1 W2.5-02A-01-17-11
7 Circlip for Bore 90 1 GB/T893.1-86
8 Washer, Adjusting on demand W2.5-02S-01-17-16
9 Bearing 6308-RS 1 GB/T276-94
10 Circlip for Shaft 110 1 GB/T894.1-86
11 Tension Arm 1 W2.5K-02B-01G-17-18-02-00
12 Spring 1 W2.5-02-01-10-03
13 Bolt M8×20 1 GB/T5783-86
14 Retaining Ring 8 1 GB/T96-85
15 Retaining Ring 8 1 GB/T93-87
16 Shaft 1 W2.5-02B-01G-17-18-01-02 W2.5-02B-01G-17
18 Bearing 6202-2RS 2 GB/T276-86 -18-00
19 Tension Pulley 1 W2.5-02B-01G-17-18-01-01 Work Tension Pulley
20 Retaining Ring 15 1 GB/T894.1-86 Assy
21 Left Housing 1 W2.5-02S-01-17-03
24 Key 10×32 1 GB/T1099-79
25 Main Transmission Shaft 1 W2.5-02S-01-17-05
26 Bearing 6308 1 GB/T276-94
27 Active Bevel Gear 1 W2.5-02A-01-17-06
28 Circlip for Shaft 40 1 GB/T894.1-86
29 O Ring 33.5×2.65 1 GB3452.1-82
30 Oil Seal 45×68×10 1 W2.5-02S-01-17-14
31 Bearing 6209 1 GB/T276-94
32 Driven Shaft 1 W2.5-02S-01-17-09
33 Driven Bevel Gear 1 W2.5-02A-01-17-07
34 Bearing 6307 1 GB/T276-94
35 O Ring132×3.55 1 GB3452.1-92
36 Gearbox Cover 1 W2.5-02A-01-17-02 2SBType1465Belt Only
37 Bolt M10×25 6 GB5783-86
38 Washer 10 12 GB93-87
39 Screw Stopper M10×1 2 JB/ZQ4450-86
40 Washer, Seal 10 2 JB982-77
41 Pulley 1 W2.5-02S-01-17-13
42 Circlip for Shaft 100 1 GB/T894.1-86
43 Key 7×30 1 GB1090-79
44 Handle Assy 1 W2.5C-02-01-09-00

- 62 -
Double Transmission Gearbox Assy (2SB Type1465 Belt Only)

- 63 -
 Double Transmission Gearbox Assy (2SB Type1465 Belt Only)

NO. Description QTY Part Code Note

45 Oil Seal 35×80×10 1 W2.5-02S-01-17-15
46 Circlip for Bore, 80 1 GB/T893.1-86
47 Washer, Adjusting 1 W2.5-02S-01-17-17
48 Bearing 6307-RS 1 GB/T276-94
49 Shaft 1 W2.5-02S-01-17-12
50 Right Housing 1 W2.5-02S-01-17-01
51 Bolt M10×30 6 GB5783-86
52 O Ring 87.5×3.55 1 GB3452.1-82
53 Bearing 6307 1 GB/T276-94
54 Driven Bevel Gear 1 W2.5-02A-01-17-10
55 Circlip for Shaft 35 1 GB/T894.1-86
56 Stopper 1 W2.5-02S-01-17-08

- 64 -
Double Transmission Gearbox Assy (SC Type1496 Belt Only)

- 65 -
 Double Transmission Gearbox Assy (SC Type1496 Belt Only)

NO. Description QTY Part Code Note

1 Retaining Ring 17-45 2 W2.5-02A-01-17-04
2 Gasket 16 2 GB/T93-87
3 Nut M16×1.5 2 GB/T6171-86
4 Pulley 1 W2.5K-02P-01-17-04
6 Oil Seal40×90×10 1 W2.5-02A-01-17-11
7 Circlip for Bore 90 1 GB/T893.1-86
8 Washer, Adjusting on demand W2.5-02S-01-17-16
9 Bearing 6308-RS 1 GB/T276-94
10 Circlip for Shaft 110 1 GB/T894.1-86
11 Tension Arm 1 W2.5K-02S-17-18-02-00
12 Spring 1 W2.5-02-01-10-03
13 Bolt M8×20 1 GB/T5783-86
14 Washer 8 1 GB/T96-85
15 Washer 8 1 GB/T93-87
16 Shaft 1 W2.5-02A-01G-17-18-01-02
18 Bearing 6202-2RS 1 GB/T276-86 W2.5-02S-17-18-
19 Pulley 1 W2.5-02A-01G-17-18-01-01 00
20 Retaining Ring 15 1 GB/T894.1-86 Work Tension Pulley
21 Left Housing GB/T893.1-86 Assy
22 Retaining Ring 35 1 W2.5-02S-01-17-03
24 Key10×32 1 GB/T1099-79
25 Main Transmission Shaft 1 W2.5-02S-01-17-05
26 Bearing 6308 1 GB/T276-94
27 Active Bevel Gear 1 W2.5-02A-01-17-06
28 Circlip for Shaft 40 1 GB/T894.1-86
29 O Ring 33.5×2.65 1 GB3452.1-82
30 Oil Seal 45×68×10 1 W2.5-02S-01-17-14
31 Bearing 6209 1 GB/T276-94
32 Driven Shaft 1 W2.5-02S-01-17-09
33 Driven Bevel Gear 1 W2.5-02A-01-17-07
34 Bearing 6307 1 GB/T276-94
35 O Ring132×3.55 1 GB3452.1-92
36 Gearbox Cover 1 W2.5-02-01-17A-02
37 Bolt M10×25 6 GB5783-86
38 Washer 10 12 GB93-87
39 Screw Stopper M10×1 2 JB/ZQ4450-86
40 Washer, Seal 10 2 JB982-77
41 Pulley 1 W2.5-02S-01-17-13
42 Circlip for Shaft 100 1 GB/T894.1-86
43 Key 7×30 1 GB1090-79

- 66 -
Double Transmission Gearbox Assy (SC Type1496 Belt Only)

- 67 -
 Double Convey Gearbox Assy(SC Type1496 Belt Only)

NO. Description QTY Part Code Note

44 Handle Assy 1 W2.5C-02-01-09-00
45 Oil Seal 35×80×10 1 W2.5-02S-01-17-15
46 Circlip for Shaft 80 1 GB/T893.1-86
47 Washer, Adjusting 1 W2.5-02S-01-17-17
48 Bearing 6307-RS 1 GB/T276-94
49 Shaft 1 W2.5-02S-01-17-12
50 Right Housing 1 W2.5-02S-01-17-01
51 Bolt M10×30 6 GB5783-86
52 O Ring 87.5×3.55 1 GB3452.1-82
53 Bearing 6307 1 GB/T276-94
54 Driven Bevel Gear 1 W2.5-02A-01-17-10
55 Circlip for Shaft 35 1 GB/T894.1-86
56 Stopper 1 W2.5-02S-01-17-08

- 68 -
Handle Assy

- 69 -
 Handle Assy

NO. Description QTY Part Code Note

1 Handle Weld 1 W2.5C-02-01-09-01-00
2 Rod (2.Throttle Control) 1 W2.5C-02-01-09-03-00
2 Rod (2.Throttle Control) 1 W2.5-02-01-09-03A-00
3 Retaining Ring 8 2 GB/T97.1-86
4 Retaining Ring 8 2 GB/T93-86
5 Bolt M8×20 2 GB/T5783-86
6 Retaining Ring 2 GB/T894.1-86
7 Roller 2 W2.5-02-01-09-02-01 W2.5-02-01-09-02-00
8 Bearing 6202-2RS 1 GB/T276-82 Tension Pulley Assy
9 Clutch Handle 1 W2.5DA-07E-05-01

- 70 -
Fan Assy

- 71 -
 Fan Assy

NO. Description QTY Part Code Note

1 Belt Pulley, Fan 1 W2.5C-02-02-05-06A
2 Bearing Seat 2 W2.5-02B-02-05-03-01 W2.5-02B-02-05-03-00
Bearing UC207 2 W2.5-02B-02-05-03-02 Bearing Combined
3 Retaining Ring 2 W2.5-02B-02-05-12
4 Nut M16×1.5 2 GB6176-86
5 Washer 16 2 GB93-87
6 Bolt M10×30 8 GB5783-86
7 Washer 10 8 GB97.1-85
8 Washer 10 12 GB93-87
9 Nut M10 4 GB6170-86
Belt, Active Transmission,
10 Fan 1 W2.5C-02-02-05-10A 4SB(4HB)1490
11 Bolt M8×20 12 GB5783-86
12 Washer 8 18 GB93-87
13 Nut M8 16 GB6170-86
14 Blade, Fan 4 W2.5-02-02-05-08
15 Shaft, Fan 1 W2.5P-02-02-05-01
16 Frame Weld, Fan 1 W2.5-02B-02-05-07-00
17 Bolt M10×1×20 4 GB5786-86 10.9
18 Hub 1 W2.5P-02-02-05-15
19 Frame Assy 1 W2.5C-02-02-05-09-00
20 Bolt M8×25 2 GB5783-86
21 Washer 8 2 GB96-85
22 Plate Weld, Fixing, Left 1 W2.5P-02-02-05-02-00
23 Balance Block on demand W3.0B-02-09-01-03
24 Washer, Adjusting on demand W2.5-02B-02-05-13
25 Plate 1 W2.5P-02-02-05-19
26 Bolt M10X25 4 GB5783-86
27 Key C10×60 2 GB1096-79
28 Spacer, Adjusting on demand WD.2F.15-08
29 Washer 10 6 GB/T93-87
30 Bolt M10X55 6 GB/T5783-86
31 Belt Pulley 1 W2.5-02B-02-05-17
32 Washer 8 16 GB96-85

- 72 -
Impurity Assy

- 73 -
 Impurity Assy

NO. Description QTY Part Code Note

1 Impurity Lifting Assy 1 W3.5H-02-11-01-00
2 Nut M6 3 GB6170-86
3 Cover Weld, Re-threshing 1 W2.0-02-11-03-06-00
4 Chain Box 1 W2.0-02-11-14-01 W2.0-02-11-14-00
5 Oil Seal (F) B25×40×7 2 GB/T13871-92 Chain Box Assy
6 Bearing 6204-2RS 1 W2.5P-02-02-11-07
7 14 Chain Wheel 1 W2.0-02-11-07
8 Key A6×22 1 GB/T1096-79
9 Retaining Ring 1 W2.0-02-11-08
10 Bolt M8×20 5 GB/T5783-86
11 Washer 8 12 GB/T93-87
12 Shaft Sleeve 1 W2.0-02-11-09
13 Circlip for Bore 47 2 GB893.1-86
14 Dust Proof Washer 1 W2.0-02-11-15
15 13 Chain Wheel II 1 W2.0-02-11-10
16 Bearing 6005-RS 1 GB/T276-94
17 Circlip for Shaft 25 1 GB894.1-86
18 Washer 6 8 GB/T93-87
19 Pin Seat Weld 1 03A.05.07
20 Pin Rod 1 03A.05-05
21 Housing Assy , Re-threshing 1 W2.5-02-02-11-03-00
22 Washer 8 12 GB/T96-85
23 Nut M8 5 GB/T6170-86
24 Bolt M6×16 8 GB/5783-86
25 Horizontal Auger Assy 1 W3.5H-02-11-02-00
26 Bearing Seat (II) 1 W2.5-02-02-11-04
27 Bearing 6304-2RS 1 W2.5-02-02-10-16
28 Washer 52, Hole 1 GB893.1-86
29 Belt Pulley, Impurity 1 W2.5P-02-02-11-05
30 Washer 12 1 GB/T96-85
31 Washer 12 1 GB/T93-87
32 Nut M12×1.25 1 GB/T6176-86
33 Chain, Impurity Auger 1 W2.5-02-02-11-06
34 Plate Weld 1 03A.05.06
35 Cover, Chain Box 1 W2.0-02-11-13
36 Bolt M8×16 3 GB/T5783-86
37 Key C6×25 1 GB/T1096-79

- 74 -
Impurity Lifting Assy

- 75 -
 Impurity Lifting Assy

NO. Description QTY Part Code Note

1 Bolt M6×16 7 GB/T5783-86
2 Washer 6 13 GB/T97.1-86
3 Washer 6 9 GB/T93-87
4 Circlip 40 1 GB893.1-86
5 Bearing 6203-2RS 1 GB/T276-94
6 2# Plate Weld, Vertical 1 W2.5-02-02-11-01-02-00
7 Washer 8 8 GB/T97.1-85
8 Washer 8 8 GB/T93-87
9 Nut M8 5 GB/T6170-86
10 Auger Weld,Impurity Lifting 1 W3.5H-02-11-01-07-00
11 Bolt M6×16 4 GB/T819-85
12 Washer 4 W2.0-02-11-02-04
13 Nut M6 10 GB/T6170-86
Housing Weld, Impurity
14 Lifting Auger 1 W3.5H-02-11-01-01-00
15 Cover Weld 1 W2.5-02-02-11-01-06-00
16 Gearbox Assy , Impurity 1 W2.5-02-02-11-01-09-00
17 Plate (2#) 1 W2.5K-02PX-02-11-01-08
18 Bearing Seat(2#Auger ) 1 WD-150A-03A.05.10-03
19 Bolt M8×16 3 GB/T5783-86
20 Washer 6 4 GB/T96-85

- 76 -
Re-thresher Housing Assy

- 77 -
 Re-thresher Housing Assy

NO. Description QTY Part Code Note

1 Housing Weld, Re-threshing 1 W2.5-02-02-11-03-01-00
2 Cover Weld, Observe 1 WD-150A-03A.05.09.02
3 Inner Plate 1 WD-150A-03A.05.09-01
4 Bolt M6×16 4 GB/T819.1-2000
5 Washer 4 WD-150-03.04-20
6 Washer 6 6 GB/T93-87
7 Nut M6 6 GB/T6170-86
8 Bolt M6×16 2 GB/T67-2000
9 Washer 6 2 GB/T97.1-85
10 Bolt M8×16 4 GB/T5783-86
11 Washer 8 4 GB/T97.1-85
12 Washer 8 4 GB/T93-87

- 78 -
Horizontal Auger Assy

- 79 -
 Horizontal Auger Assy

NO. Description QTY Part Code Note

1 Horizontal Auger Assy 1 W3.5H-02-11-02-01-00
2 Bolt M8×20 12 GB/T70-85
3 Cushion 8 12 GB/T93-87
4 Balance Block on demand QT007-2009
5 Re-threshing teeth Weld (I) 2 WD-150A-03A.05.02
6 Re-threshing teeth Weld (II) 2 WD-150A-03A.05.03
7 Balance Block on demand W2.5-02-56-07-20

- 80 -
Impurity Gearbox Assy

- 81 -
 Impurity Gearbox Assy

NO. Description QTY Part Code Note

1 Housing, Impurity Gearbox 1 WD-150A-03.05.10.01-01A
2 Input Shaft 1 WD-150A-03A.05.10.01-01
3 Seal Ring 25×47×7 1 GB/T13871-92
4 Retaining Ring 47 2 GB/T893.1-86
5 Bearing 6204-RS 1 GB/T276-94
6 Retaining Ring 20 1 GB/T894.1-86
7 Bevel Gear 1 WD-150-03.05.10.01-03
8 Bearing 6002-RS 1 GB/276-94
9 Seal Ring 30×47×7 1 GB/T13871-92
10 Bearing 6005-RS 1 W2.5-02-02-11-01-09-04
11 Bevel Gear 1 WD-150-03.05.10.01-04
12 Stopper 1 WD-150-03.05.10.01-05
13 Sleeve 1 WD-150A-03A.05.10.01-02

- 82 -
Vibration Sieve Assy

- 83 -
 Vibration Sieve Assy

NO. Description QTY Part Code Note

1 Vibration Sieve Assy 1 W2.5-02G-02-13B-01-00
Vibration Sieve Driving
2 Assy 1 W2.5P-02-02-13-02-00

- 84 -
Vibration Sieve Assy

- 85 -
 Vibration Sieve Assy

NO. Description QTY Part Code Note

1 Canvas, Sieve Box, Front 1 W2.5-02-02-13-01-04
2 Press Plate 1 W2.5-02-02-13-01-05
3 Press Plate, Left 1 W2.5-02G-02-13B-01-06
4 Canvas, Sieve Box, 1 2 W2.5-02G-02-13B-01-07
5 Sieve Box Weld 1 W2.5-02G-02-13B-01-01-00
6 Sieve Assy , Upper 1 W2.5-02G-02-13C-01-02-00
7 Sieve Assy , Rear 1 W2.5-02G-02-13B-01-03-00
8 Baffle Plate, Rear 1 W2.5-02-02-13-01-09
9 Canvas 1 W2.5-02-02-13-01-10
10 Press Plate 2 W2.5-02-02-13-01-01-12
11 Canvas, Sieve Box, 2 2 W2.5-02-02-13-01-11
12 Bearing 6301-2RS 2 W2.5-02G-02-13-01-24
13 Separating Plate, Lower 1 W2.5-02G-02-13B-01-12-00
14 Strainer Mesh Weld (13) 1 W2.5-02G-02-13B-01-14-00
15 Nut M8 3 GB/T6170-86
16 Washer 8 12 GB/T93-87
17 Sieve, Rear 1 W2.5-02-02-13-01-16-00
18 Nut M6 4 GB/T62-88
19 Bolt M8X20 12 GB/T5783-86
20 Bolt M6X16 4 GB/T5783-86
21 Washer 6 47 GB/T93-87
22 Press Plate, Right 1 W2.5-02G-02-13B-01-19
23 Canvas, Sieve Box, 2 1 W2.5-02G-02-13-01-20
24 Press Plate Weld 1 W2.5-02G-02-13-01-21-00
25 Nut M6 38 GB/T6170-86
26 Washer 10 W2.5P-02-02-10-05-03
27 Baffle Plate 1 W2.5-02-02-13-01-22
28 Strainer Mesh Weld (16) 1 W2.5-02G-02-13B-01-14A-00 In Tool Box
29 Bolt M6×20 6 GB/T5783-86
30 Washer 6 24 GB/T96-85
31 Bolt M6×25 4 GB/T5783-86
32 Bolt M6×18 16 GB/T5783-86
33 Bolt M6×12 5 GB/T5783-86

- 86 -
Vibration Sieve Assy

- 87 -
 Vibration Sieve Assy

NO. Description QTY Part Code Note

1 Nut M12×1.25 2 GB/T6171-86
2 Washer 12 2 GB/T96-85
3 Washer 12 2 GB/T93-87
4 Belt Pulley, Vibration Sieve 1 W2.5P-02-02-13-02-07-00
5 Plate 2 W2.5-02B-02-13-02-04
6 Bearing Seat 2 W2.0-02-13-01-03
7 Shaft 1 W2.5-02B-02-13-02-01
8 Eccentric Roller 2 W2.0-02-13-01-08
9 Bearing 6012-2RS 2 GB/T 276-94
10 Washer 8 20 GB/T93-87
11 Bolt M8×20 16 GB/T5783-86
12 Bearing Seat 2 W2.5-02B-02-13-02-03
13 Bearing 6205-2RZ 2 GB/T276-94
14 Circlip for Bore 52 2 GB/T893.1-86
15 Connecting Plate Weld 1 W2.5P-02-02-13-02-05-00
16 Key A5×25 1 GB/T1096-79
17 Nut M8 4 GB/T6170-87
18 Counter Weight 2 W2.5P-02-02-13-02-09-00
19 Shaft Sleeve 2 W2.5-02B-02-13-02-08
20 Key A8×28 2 GB/T1096-79
21 Bolt M8×30 4 GB/T5782-86
22 Key A8×32 1 GB/T1096-79
23 Bolt M10×30 6 GB/T5783-86 10.9
24 Cushion10 6 GB/T93-87

- 88 -
Upper Sieve Assy

- 89 -
 Upper Sieve Assy

NO. Description QTY Part Code Note

1 Washer 6 68 GB/T97.1-85
2 Pin1.6×16 68 GB/T1220-84 Stainless Steel Pin
3 Connecting Plate 1 W2.5-02G-02-13C-01-02-01-01
4 Sieve Plate (1) 17 W2.5-02-02-13-01-02-02-00
5 Connecting Plate 1 W2.5-02G-02-13C-01-02-03-01
6 Bolt M8×18 8 GB/T5783-86
7 Washer 8 10 GB/T93-87
8 Plate 1 W2.5-02-02-13-01-02-07
9 Washer 8 2 GB/T96-85
10 Sieve Plate (2) 1 W2.5-02-02-13-01-02-04-00
11 Plate Weld, Adjusting 1 W2.5-02-02-13-01-02-05-00
12 Plate 2 W2.5-02G-02-13C-01-02-06
13 Bolt M8×16 2 GB/T5783-86
14 Nut M8 8 GB/T6170-86

- 90 -
Rear Sieve Assy

- 91 -
 Rear Sieve Assy

NO. Description QTY Part Code Note

1 Sieve Seat Weld 1 W2.5-02G-02-13B-01-03-01-00
2 Sieve, Left 9 W2.5-02G-02-13B-01-03-02
3 Nut M6 18 GB/T6170-86
4 Washer 6 18 GB/T93-87
5 Steel Wire 2 W2.5-02-02-13-01-03-03
6 Sieve, Right 9 W2.5-02G-02-13B-01-03-03
7 Washer, Big 6 18 GB/T96-85
8 Bolt M6X16 18 GB/T5783-86

- 92 -
Lower Separating Plate Assy

- 93 -
 Lower Separating Plate Assy

NO. Description QTY Part Code Note

Connecting Plate Weld,
1 Lower 1 W2.5-02-02-13-01-12-01-00
2 Press Plate 1 W2.5-02-02-13-01-12-02
3 Press Plate 1 W2.5-02-02-13-01-12-03
4 Washer 6 4 GB/T93-87
5 Nut M6 4 GB/T6170-86
6 Fiber Plate 1 W2.5-02-02-13-01-12-04
7 Canvas (1) 1 W2.5-02G-02-13B-01-12-05

- 94 -
Tension Pulley Assy

- 95 -
 Tension Pulley Assy

NO. Description QTY Part Code Note

1 Bolt M8×18 4 GB5783-86
2 Bearing 6204-RS 2 GB/T276-86
3 Washer 1 W2.5-02-02-12-06
4 Retaining Ring 20 1 GB/T894-86
5 Retaining Ring 47 1 GB/T893.1
6 Belt Pulley 1 W2.5P-02-02-12-02
7 Transition Wheel 2 W2.5P-02-02-12-01
8 Bolt M8×16 6 GB5783-86
9 Nut M8 8 GB6170-86
10 Washer 8 10 GB93-87
11 Retaining Ring 15 1 GB/T894-86
12 Belt Pulley Assy 1 W2.5P-02-02-12-04-00
13 Shaft Sleeve 1 W2.5-02-02-12-05
14 Tension Bolt 1 W2.5P-02-02-10-09
15 Bearing (1620) 1 W2.5-02-01-14-05
16 Frame Weld, Tension 1 W2.5P-02-02-12-03-00
17 Spring, Shaking 1 W2.5-02-02-12-03
18 Washer 42 1 GB/T893.1
19 Bearing 6302-2RS 1 W2.5P-02-02-12-08

- 96 -
Main Clutch Tension Assy

- 97 -
 Main Clutch Tension Assy

NO. Description QTY Part Code Note

1 Tension Pulley, Main Clutch 1 W2.5C-02-02-22C-01
2 Connecting Seat Weld 1 W2.5C-02-02-22C-02-00
3 Shaft 1 W2.5C-02-02-22C-03
4 Support Arm Weld, Left 1 W2.5C-02-02-22C-04-00
5 Support Arm Weld, Right 1 W2.5C-02-02-22C-05-00
6 Shaft 1 W2.5C-02-02-22C-06
7 Plate Weld, Left 1 W2.5C-02-02-22C-07-00
8 Plate Weld, Right 1 W2.5C-02-02-22C-08-00
9 Support Plate 1 W2.5C-02-02-22C-09
10 Sleeve 1 W2.5C-02-02-22C-10
11 Bearing (1620) 2 W2.5C-02-02-22C-11
12 Bearing 6004-RS 2 W2.5C-02-02-22C-12
13 Stretch Rod 1 W2.5C-02-02-22C-14 Canopy Type
Stretch Rod 1 W2.5C-02-02-22E-01 Cabin Type
14 Nut M10 2 GB6170-86
15 Bolt M10×30 2 GB5783-86 10.9
16 Washer 10 2 GB96-85
17 Washer 10 3 GB93-87
18 Nut M12 3 GB6170-86
19 Washer 12 3 GB93-87
20 Retaining Ring (12) 1 WD-150-03.14.01-05
21 Washer 10 2 GB97.1-85
22 Washer 12 1 GB96-85
23 Nut M12 1 GB6172-86
24 Hook 1 W2.5C-02-02-22C-13 Canopy Type

- 98 -
Support Frame Assy

- 99 -
 Support Frame Assy

NO. Description QTY Part Code Note

1 Frame Weld, Cover 1 W2.5K-02PD-25-01-00
2 Frame Weld, Support 1 W3.5-02A-26-02-00 2SB 1496 Belt
2 Frame Weld, Support 1 W2.5-02G-02-25-02-00 SC 1465 Belt
3 Bolt M8×20 3 GB5783-86
4 Washer 8 4 GB93-86
5 Washer 8 1 GB96-85
6 Shaft Weld 1 W2.5-02G-02-25-03-00
7 Nut M8 1 GB/T6170-86
8 Washer 8 1 GB/T96-85
9 Frame Weld, Support 1 W2.5K-02PD-25-02-00
10 Bolt M6×18 2 GB5783-86
11 Washer, Plain 6 2 GB/T97.1-85
12 Cushion 6 2 GB/T93-87
13 Nut M6 2 GB/T6170-86
14 Bolt M10×25 3 GB5783-86
15 Washer 10 3 GB97.1-85
16 Cushion 10 3 GB93-87

- 100 -
Horizontal Grain Auger Assy (Sack Type)

- 101 -
 Horizontal Grain Auger Assy (Sack Type)

NO. Description QTY Part Code Note

1 Chain Wheel (17), Active 1 L1.8A-03-02-01-04A
2 Cover, Bearing 1 L1.8A-03-04-02-05
4 Bearing, Grain 1 W2.5K-02PC-10A-02
5 Oil Seal (F)B30X45X10 1 GB/T13871-92
6 Shaft Sleeve 1 L1.8A-03-02-01-05
7 Auger Weld, Horizontal 1 W2.5A-02B-02-10-02-00
8 Cover Plate 1 W2.5K-02PB-10A-05
9 Cover Weld 1 W2.5K-02PB-10A-04-00
10 Retaining Ring 1 03.10.06-01
11 Bolt M10X20 1 GB/T5783-86
12 Washer 8 15 GB/T93-87
13 Key C8X30 1 GB/T1096-79
14 Bolt M6X16 9 GB/T5783-86
15 Washer 6 6 GB/T97.1-85
16 Washer 6 9 GB/T93-87
Bearing Seat,
17 Horizontal, Grain 1 W2.5P-02-02-10-07
18 Retaining Ring 52 1 GB/T893.1-85
19 Bearing 6304-2RS 1 W2.5-02-02-10-16
20 Tension Pulley Assy 1 W2.5P-02-02-10-05-00
21 Washer 12 1 GB/T96-85
22 Nut M12X1.25 1 GB/T6176-86
23 Washer 12 1 GB/T93-86
24 Retaining Ring 63 1 GB/T894.1-85
Auger Assy,
25 Vertical, Lifting 1 W2.5K-02PB-10C-01-00 Sack Type
26 Chain, Lifting, Grain 1 W2.5K-02PB-10A-15
27 Tension Chain Wheel Assy 1 L1.8A-03-02-04-00
28 Bevel Gearbox Assy 1 L1.8A-03-02-03-00
29 Washer 10 4 GB/T93-87
30 Bolt M10X25 3 GB/T5783-86
31 Nut M8 10 GB/T6170-86
32 Washer 8 4 GB/T96-85
33 Bearing Seat Weld 1 W2.5K-02SA-10A-03-00
34 Belt Pulley, Grain Auger 1 W2.5P-02-02-10-06
35 Key A5X28 1 GB/T1096-79
36 Bolt M8X25 9 GB/T5783-86
37 Spring, Threshing 1 W2.5-02-02-10-08A
38 Tension Bolt 1 W2.5-02-02-10-14
39 Sponge 1 W2.5-02A-02-10-07
40 Washer 6, 3 GB/T96-85
- 102 -
41 Gasket, Adjusting on demand W2.5-02GX-02-10-15

- 103 -
Grain Auger Assy (Grain Tank Type)

- 104 -
 Grain Auger Assy (Grain Tank Type)

NO. Description QTY Part Code Note

1 Chain Wheel (17), Active 1 L1.8A-03-02-01-04A
2 Cover, Bearing 1 L1.8A-03-04-02-05
4 Bearing, Grain 1 W2.5K-02PC-10A-02
5 Oil Seal (F)B30X45X10 1 GB/T13871-92
6 Shaft Sleeve 1 L1.8A-03-02-01-05
7 Auger Weld, Horizontal 1 W2.5A-02B-02-10-02-00
8 Cover Plate 1 W2.5K-02PB-10A-05
9 Cover Weld 1 W2.5K-02PB-10A-04-00
10 Retaining Ring 1 03.10.06-01
11 Bolt M10X20 1 GB/T5783-86
12 Washer 8 15 GB/T93-87
13 Key C8X30 1 GB/T1096-79
14 Bolt M6X16 9 GB/T5783-86
15 Washer 6 6 GB/T97.1-85
16 Washer 6 9 GB/T93-87
Bearing Seat,
17 Horizontal, Grain 1 W2.5P-02-02-10-07
18 Retaining Ring 52 1 GB/T893.1-85
19 Bearing 6304-2RS 1 W2.5-02-02-10-16
20 Tension Pulley Assy 1 W2.5P-02-02-10-05-00
21 Washer 12 1 GB/T96-85
22 Nut M12X1.25 1 GB/T6176-86
23 Washer 12 1 GB/T93-86
24 Retaining Ring 63 1 GB/T894.1-85
Auger Assy,
25 Vertical, Lifting 1 W3.5H-02-10-01-00
26 Chain, Lifting, Grain 1 W2.5K-02PB-10A-15
27 Tension Chain Wheel Assy 1 L1.8A-03-02-04-00
28 Bevel Gearbox Assy 1 L1.8A-03-02-03-00
29 Washer 10 4 GB/T93-87
30 Bolt M10X25 3 GB/T5783-86
31 Nut M8 10 GB/T6170-86
32 Washer 8 4 GB/T96-85
33 Bearing Seat Weld 1 W2.5K-02SA-10A-03-00
34 Belt Pulley, Grain Auger 1 W2.5P-02-02-10-06
35 Key A5X28 1 GB/T1096-79
36 Bolt M8X25 9 GB/T5783-86
37 Spring, Threshing 1 W2.5-02-02-10-08A
38 Tension Bolt 1 W2.5-02-02-10-14
39 Sponge 1 W2.5-02A-02-10-07
40 Washer 6, 3 GB/T96-85
- 105 -
41 Gasket, Adjusting on demand W2.5-02GX-02-10-15

- 106 -
Vertical Lifting Auger Assy

- 107 -
 Vertical Lifting Auger Assy

NO. Description QTY Part Code Note

1 Square Cross, Connecting 1 W2.5K-02PB-10A-01-01-00
2 Auger Weld, Vertical Lifting 1 W2.5K-02PB-10C-01-03-00 Sack Type/Canopy
2 Auger Weld, Vertical Lifting W3.5H-02-10-01-03-00 Big Grain Tank Only
Housing Weld, Vertical Lifting
3 Auger 1 W2.5K-02PB-10C-01-02-00 Sack Type/Canopy
Housing Weld, Vertical Lifting
3 Auger housing Assy W3.5H-02-10-01-02-00 Big Grain Tank Only
4 Oil Cup M6 2 GB/T1152-89
5 Gasket 1 W2.5-02G-02-10-01-05
6 Bevel Gear 1 W2.5-02G-02-10-01-04
7 Bearing Seat 1 L1.8A-03-04-01-01
8 Circlip for Bore 62 1 GB/T893.2-86
9 Bearing 6206 1 GB/T276-82
10 Oil Seal (F)B38X52X12 1 GB/T13871-92
11 Bolt M8X30 4 GB/T70-85
12 Bearing 6204-2RS 1 GB/T276-82
13 Plate (1#，Vertical) 1 W2.5-02GX-02-10-01-05
14 Bolt M8X20 4 GB/T5783-86
15 Washer 8 15 GB/T93-87
16 Nut M8 15 GB/T6170-86
17 Plate 2 W2.5-02GX-02-10-01-06
18 Bolt M8×20 4 GB/T12-1988 8.8
19 Bolt M6X16 4 GB/T819-85
20 Washer 4 W2.0-02-11-02-04
21 Nut M6 4 GB/T6170-86
22 Anti-wear Plate 1 W2.5-02B-02-10-01-04 Sack Type
22 Anti-wear Plate 1 W2.5K-02PX-10-01-04 Grain Tank Type
23 Washer 6 4 GB/T93-87

- 108 -
Tension Pulley Assy

- 109 -
 Tension Pulley Assy

NO. Description QTY Part Code Note

1 Bolt M6×12 10 GB5783-86
2 Washer 6 10 GB93-87
3 Nut M6 10 GB6170-86
4 Tension Arm Weld 1 W2.5P-02-02-10-05-01-00
5 Bolt M6×12 1 GB5783-86
6 Washer 6 1 GB93-87
7 Washer 1 W2.5P-02-02-10-05-03
8 Tension Pulley 2 W2.5P-02-02-10-05-02-01
9 Bearing 6302-2RS 1 GB/T276-1994

- 110 -
Tension Chain Wheel Assy

- 111 -
 Tension Chain Wheel Assy

NO. Description QTY Part Code Note

1 Pin Shaft φ15X25 1 L1.8A-03-02-04-01
2 Tension Shaft Sleeve 1 L1.8A-03-02-04-02
φ15.5X10.4
Tension Chain Wheel
3 08BX14 1 L1.8A-03-02-04-03
4 Bearing 6202-2RS 1 GB/T 276-94
5 Circlip for Bore 35 1 GB/T893.1-86
6 Washer 12 1 GB/T97.1-85
7 Washer 12 1 GB/T93-87
8 Nut M12 1 GB/T6170-86

- 112 -
Gearbox Assy

- 113 -
 Gearbox Assy

NO. Description QTY Part Code Note

1 Gearbox Housing 1 L1.8A-03-04-03-01
2 Bearing Seat 1 L1.8A-03-04-03-02
3 Retaining Ring 1 L1.8A-01-02-17
4 Shaft, Chain wheel 1 L1.8A-03-04-03-03
5 Chain Wheel (15) 1 L1.8A-03-02-03-01
6 Bevel Gear 1 L1.8A-03-04-03-05
7 Key C8×30 1 GB/T1096-79
8 Bearing 205-LS 1 GB/T276-94
9 Bearing 205 1 GB/T276-94
10 Bolt M6×20 1 GB/T5783-86
11 Washer 6 1 GB/T93-87
12 Bolt M8×25 3 GB/T5783-86
13 Washer 8 3 GB/T93-87
14 Key A8×20 1 GB/T1096-79
15 Oil Cup M6 1 GB/T1152-89

- 114 -
Ⅲ. Straw Chopper

- 115 -
Straw Chopper

- 116 -
 Straw Chopper

NO. Description QTY Part Code Note

1 Belt Pulley 1 W2.5-02-56B-30
2 Tension Device 1 W2.5-02-56B-28-00
3 Transmission Belt, Transition 1 W2.5-02-56-28 C3280
4 Tension Wheel Assy 1 W2.5-02-56B-29-00
5 Transition wheel Assy 1 W2.5-02-56C-20-00
6 Protecting Device Assy 1 W2.5-02-56B-25-00
7 Transmission Belt 2 W2.5-02-56A-21 B2065
8 Tension Frame Assy 1 W2.5-02-56C-31A-00
9 Straw Chopper Assy 1 W2.5-02-56C-00

- 117 -
Transition Wheel Assy

- 118 -
 Transition Wheel Assy

NO. Description QTY Part Code Note

1 Bearing 6304-RS 2 GB/T276-82
2 Shaft Sleeve Weld 1 W2.5-02-56-20-05-00
3 Belt Pulley 1 W2.5-02-56C-20-02
4 Gasket, Adjusting 3 W2.5-02-56-18-02
5 Washer 1 GB/T93-87
6 Bolt M8X18 1 GB/T5783-86
7 Retaining Ring 1 W2.0-02-11-08

- 119 -
Tension Assy

- 120 -
 Tension Assy

NO. Description QTY Part Code Note

1 Spring 1 W2.5-02-56B-28-06
2 Tension Bolt 1 W2.5-02-56B-28-07
3 Nut M8 2 GB6170-86
4 Bolt M8×16 2 GB5783-86
5 Washer 8 3 GB93-87
6 Washer 8 2 WD-150.01.29.01-05
7 Circlip for Shaft Φ17 1 GB/T894.1-86
8 Bearing (1620) 2 W2.5-02-56B-28-05
9 Tension Arm Weld 1 W2.5-02-56B-28-02-00
10 Circlip for Shaft Φ16 1 GB/T894.1-86
11 Bolt M10×30 2 GB5783-86
12 Washer 10 2 GB93-87
13 Tension Seat Weld 1 W2.5-02-56B-28-03-00
14 Tension Pulley Assy 1 W2.5-02-56B-28-01-00
15 Tension Frame 1 W2.5-02-56B-28-04-00

- 121 -
Straw Chopper Assy

- 122 -
 Straw Chopper Assy

NO. Description QTY Part Code Note

1 Shaft Assy , Straw Chopper 1 W2.5-02-56C-07-00

2 Fixed Chopper Assy 1 W2.5-02-56C-04-00
3 Plate Assy, Blade Fixing 1 W2.5-02-56C-05-00
Plate Assy , Straw
4 Separating 1 W2.5-02-56C-16-00
5 Plate Assy , Anti-tangle 2 W2.5-02-56-13-00
6 Plate Weld, Left Side 1 W2.5-02-56B-02-00
Installation Seat Weld ,
7 Left, Upper 1 W2.5-02-56C-10-00
Installation Seat, Left,
8 Lower 1 W2.5-02-56C-11-00
9 Cover Assy 1 W2.5-02-56B-15-00
10 Hook Plate Weld 1 W2.5-02-56C-03-00
11 Chain Assy 2 W2.5-02-56C-01-00
12 Left Side Plate 1 W2.5-02-56C-36
13 Hinge 38X31 2 GB/T3874-1999
14 Cushion 4 8 GB97.1-85
15 Nut M4 8 GB6170-86
16 Bolt M4X12 8 GB5783-86
17 Plate Assy, Rear 1 W2.5-02-56C-06-00
18 Hook, Straw Chopper 2 W2.5-02-56C-02
19 Bolt M8X25 14 GB/T5783-86
20 Washer 8 20 GB/T96-85
21 Washer 8 54 GB/T97.1-85
22 Nut M8 26 GB/T6170-86
23 Pin Shaft B10X24 2 GB882-86
24 Washer 10 2 GB97.1-85-85
25 Pin φ3.2X20 2 GB/T91
26 Cover Plate Weld 1 W2.5-02-56C-17-00
27 Frame Weld, Support 1 W2.5-02-56B-01-00
28 Cover Assy , Upper 1 W2.5-02-56B-08-00
29 Plate Weld, Right Side 1 W2.5-02-56B-03-00
30 Bolt M10X30 22 GB/T5783-86
31 Washer 10 16 GB/T96-85
32 Washer 10 20 GB/T93-87
Installation Seat Weld ,
33 Right, Upper 1 W2.5-02-56C-12-00
34 Plate, Right 1 W2.5-02-56C-09

- 123 -
Tension Frame Assy

- 124 -
 Tension Frame Assy

NO. Description QTY Part Code Note

1 Pin Shaft 1 W2.5-02-56B-31-03
2 Plate 1 W2.5-02-56C-31A-01
3 Fixed Sleeve Weld 1 W2.5-02-56B-31-02-00
4 Bearing 6204-2RS 2 W2.5-02-56C-31-02-03
5 Tension Pulley 1 W2.5-02-56C-31-02-01 W2.5-02-56C-31-02-00
6 Shaft Sleeve Weld 1 W2.5-02-56C-31-02-02-00 Tension Pulley Assy
7 Washer 16 1 GB/T97.1-86
8 Washer 16 1 GB/T93-85
9 Nut M16 1 GB/T6170-86

- 125 -
Fixed Chopper Assy

- 126 -
 Fixed Chopper Assy

NO. Description QTY Part Code Note

1 Frame Weld, Chopper Fixed 1 W2.5-02-56C-04-01-00
2 Chopper 25 W2.5-02-56-04-01
3 Bolt M10×25 6 GB5783-86
4 Washer 10 6 GB97.1-85
5 Washer 10 6 GB93-87
6 Nut M10 6 GB6170-86
7 Plate Weld, Fixed Chopper 13 W2.5-02-56A-04-02-00
8 Bolt M8×20 13 GB5783-86
9 Washer 8 13 GB93-87

- 127 -
Straw Chopper Shaft Assy

- 128 -
 Straw Chopper Shaft Assy

NO. Description QTY Part Code Note

1 Shaft Weld, Straw Chopper 1 W2.5-02-56C-07-01-00
2 Chopper 24 W2.5-02-56-04-01
3 Bolt M12×25 24 GB5783-86
4 Nut M12 24 GB/T889-2000
5 Key A8×45 1 GB1096-79
6 Shaft Ring 1 W2.5-02-56B-07A-05
7 Bearing Seat B 1 W2.5-02-56B-07A-19
8 Bolt M10×35 4 GB5783-86
9 Cushion10 8 GB93-87
10 Cushion 10 8 GB97.1-85
11 Washer72, Hole 1 GB893.1-86
12 Bearing 6306-2RS,Left 1 W2.5-02-56-07-24
13 Sleeve 1 W2.5-02-56B-07A-03
14 Belt Pulley 1 W2.5-02-56C-07A-18
15 Nut M16 1 GB6170-86
16 Cushion16 1 GB93-87
17 Washer 1 WD.4F.27A-02
18 Bolt M8X20 on demand GB/T5783-86
19 Balance Block on demand W2.5-02G-01-02-19
20 Balance Block on demand QT007-2009
21 Washer 8 on demand GB/T93-87
22 Nut M8 on demand GB/T6170-86
23 Bearing UELFC206 1 W2.0M-02-72-08
24 Bolt M10×45 4 GB5783-86

- 129 -
Blade Fixing Plate Assy

- 130 -
 Blade Fixing Plate Assy

NO. Description QTY Part Code Note

1 Fixing Plate Weld 1 W2.5-02-56C-05-01-00
2 Bolt M8X25 4 GB/T5783-86
3 Washer, Big 8 6 GB/T96-85
4 Washer 8 6 GB/T97.1-85
5 Washer 8 6 GB/T93-87
6 Nut M8 4 GB/T6170-86
7 Bolt 8X20 2 GB818-2000

- 131 -
Rear Plate Assy

- 132 -
 Rear Plate Assy

NO. Description QTY Part Code Note

1 Plate Weld, Rear Side 1 W2.5-02-56C-06-01-00
2 Guide Plate Weld A 4 W2.5-02-56A-06-02-00
3 Gasket 8 8 GB/T96-85
4 Gasket 8 8 GB/T93-87
5 Nut M8 6 GB/T62-88

- 133 -
Anti-tangle Assy
.

- 134 -
 Anti-tangle Assy .

NO. Description QTY Part Code Note

1 Anti-tangle Plate 1 W2.5-02-56-13-01
2 Bolt M6×12 2 GB5783-86
3 Washer 6 2 GB96-85
4 Washer 6 2 GB93-87

- 135 -
Straw Separating Plate Assy

- 136 -
 Straw Separating Plate Assy

NO. Description QTY Part Code Note

1 Straw Separating Weld 1 W2.5-02-56C-16-01-00
2 Bolt M8X25 4 GB/T5783-86
3 Washer 8 4 GB/T97.1-85
4 Washer 8 4 GB/T96-85
5 Washer 8 4 GB/T93-87
6 Nut M8 4 GB/T6170-86

- 137 -
IV Chassis

- 138 -
Chassis Assy (Ruilong Plus, Cabin Type)

- 139 -
 Chassis Assy (Ruilong Plus, Cabin Type)

NO. Description QTY Part Code Note

1 Chassis Weld 1 W3.5H-03A-01-00
2 Press Plate 1 W2.5DA-03H-35Q
3 Washer 8 2 GB/T97.1
4 Nut M8 2 GB/T6170
5 Washer 8 7 GB/T93
6 Hook 2 W2.5DA-03H-36Q
7 HST Assy 1 W2.0-03(R)-03-00 45CC
8 Gearbox Assy 1 W3.5H-03A-02-00
9 HST Connector 1 W2.5E-03B-10-00
10 Tension Pulley Assy , Walking 1 W2.5DA-03H-17C-00
11 Joint Belt, Walking 9J-5-1605 1 W2.5DA-03H-31
12 Guide Rail Weld, Front 2 W2.5D-03-32-00
13 Bolt M12×35 16 GB/T5783 10.9
14 Nut M12 16 GB/T6170 10
15 Washer 12 16 GB/T93
16 Support Roller Assy 12 W3.5H-03A-06-00
17 Pin Shaft B16×55 2 GB/T882
18 Washer 16 2 GB/T97.1
19 Pin 4×36 2 GB/T91
20 Balanced Roller Assy 2 W3.5H-03A-07-00
21 500×90×56 45mm Track 2 W5.0-03X-40 Optional
22 550×90P×56 mm Track 2 WD.4ME-09 Optional
23 550×90×56 60mm Track 2 W3.5H-03A-30 Standard
24 Roller Assy , Support 2 W3.5H-03A-28-00
25 Guide Rail Weld, Rear 2 WD.4FE.33
26 Tension Pulley Assy 2 WD.4ME.27
27 Stopper, Rubber 1 W2.5DA-03H-34D
28 Safety Railing Assy 1 W2.5DA-03HX-18-00
29 Dust Proof Washer 1 W2.5DA-07-06-03-05
30 Supporting Assy, Middle 1 W2.5M-03F-50-00
31 Right Plate, Cabin 1 W3.5H-03A-51
32 Bolt M8X20 5 GB/T5783
33 Washer 8 5 GB/T96
34 Pedal Assy 1 W3.5-03A-16-00

- 140 -
Chassis Assy (Ruilong Plus, Canopy，Big Grain Tank)

- 141 -
 Chassis Assy (Ruilong Plus, Canopy, Big Grain Tank)

NO. Description QTY Part Code Note

1 Chassis Weld 1 W3.5H-03K-01-00
2 Press Plate 1 W2.5DA-03H-35Q
3 Washer 8 2 GB/T97.1-86
4 Nut M8 2 GB/T6170-86
5 Washer 8 2 GB/T93-87
6 Hook 2 W2.5DA-03H-36Q
7 HST Assy 1 W2.0-03(R)-03-00 45CC
8 Gearbox Assy 1 W3.5H-03A-02-00
9 HST Connector 1 W2.5DA-03H-10-00
10 Tension Pulley Assy , Walking 1 W2.5DA-03H-17C-00
11 Joint Belt, Walking 9J-5-1605 1 W2.5DA-03H-31
12 Guide Rail Weld, Front 2 W2.5D-03-32-00
13 Bolt M12×35 16 GB/T5783-86 10.9
14 Nut M12 16 GB/T6170-86 10
15 Washer 12 16 GB/T93-87
16 Support Roller Assy 12 W3.5H-03A-06-00
17 Pin Shaft B16×55 2 GB/T882-86
18 Washer 16 2 GB/T97.1-85
19 Pin 4×36 2 GB/T91-86
20 Balanced Roller Assy 2 W3.5H-03A-07-00
21 500×90×56 45mm Track 2 W5.0-03X-40 Optional
22 550×90P×56 Track 2 WD.4ME-09 Optional
23 550×90×56 60mm Track 2 W3.5H-03A-30 Standard
24 Roller Assy , Support 2 W3.5H-03A-28-00
25 Guide Rail Weld, Rear 2 WD.4FE.33
26 Tension Pulley Assy 2 WD.4ME.27
27 Stopper, Rubber 1 W2.5DA-03H-34D
28 Safety Railing Assy 1 W2.5DA-03HX-18-00
29 Plate 1 W2.5DA-03H-20D
30 Bolt M6X16 2 GB/T5783-86
31 Washer 6 2 GB/T97.1-85
32 Washer 6 2 GB/T93-87
33 Pedal Assy 1 W3.5B-03-16-00

- 142 -
Chassis Assy (Ruilong Plus, Sack Type)

- 143 -
 Chassis Assy (Ruilong Plus, Sack Type)

NO. Description QTY Part Code Note

1 Chassis Weld 1 W3.5H-03R-01-00
2 Press Plate 1 W2.5DA-03H-35Q
3 Washer 8 2 GB/T97.1
4 Nut M8 2 GB/T6170
5 Washer 8 2 GB/T93-87
6 Hook 2 W2.5DA-03H-36Q
7 HST Assy 1 W2.0-03(R)-03-00 45CC
8 Gearbox Assy 1 W3.5H-03A-02-00
9 HST Connector 1 W2.5DA-03H-10-00
10 Tension Pulley Assy , Walking 1 W2.5DA-03H-17C-00
11 Joint Belt, Walking 9J-5-1605 1 W2.5DA-03H-31
12 Guide Rail Weld, Front 2 W2.5D-03-32-00
13 Bolt M12×35 16 GB/T5783 10.9
14 Nut M12 17 GB/T6170 10
15 Washer 12 17 GB/T93
16 Support Roller Assy 12 W3.5H-03A-06-00
17 Pin Shaft B16×55 2 GB/T882
18 Washer 16 2 GB/T97.1
19 Pin 4×36 2 GB/T91
20 Balanced Roller Assy 2 W3.5H-03A-07-00
21 500×90×56 45mm Track 2 W5.0-03X-40 Optional
22 550×90P×56 Track 2 WD.4ME-09 Optional
23 550×90×56 60mm Track 2 W3.5H-03A-30 Standard
24 Roller Assy , Support 2 W3.5H-03A-28-00
25 Guide Rail Weld, Rear 2 WD.4FE.33
26 Tension Pulley Assy 2 WD.4ME.27
27 Stopper, Rubber 1 W2.5DA-03H-34D
28 Plate 1 W2.5DA-03H-20D
29 Bolt M6X16 2 GB/T5783-86
30 Washer 6 2 GB/T97.1-85
31 Washer 6 2 GB/T93-87
32 Pedal Assy 1 W3.5B-03-16-00
33 Cover Plate 1 W3.5H-03R-18
34 Bolt M8×16 9 GB/T818-85
35 Washer 8 9 GB/T96-85
36 Plate Weld 1 W3.5H-03R-16-00
37 Pin Shaft B10×55 2 GB/T882
38 Washer 10 2 GB/T97.1
39 Pin 3.2×30 2 GB/T91
40 Balance Block 3 W2.5-03-21

- 144 -
Chassis Assy (Ruilong Plus, Sack Type)

- 145 -
 Chassis Assy (Ruilong Plus, Sack Type)

NO. Description QTY Part Code Note

41 Bolt M10×90 6 GB/T5782
42 Washer 10 6 GB/T93
43 Seat Weld 1 L1.8A-12-00
44 Bolt M12×60 1 GB/T5782-86
45 Washer 12 1 GB/T97.1

- 146 -
Gearbox Assy

- 147 -
 Gearbox Assy

NO. Description QTY Part Code Note

1 Driving Chain Wheel 2 WD.4MC.2-01C
2 Adjusting Gasket, Gearbox on demand W2.0-03-02-04
3 Bolt M12×30 2 GB/T5783 With 1 Spacer
4 Bolt M12×35 2 GB/T5783 With 2-3 Spacer
5 Bolt M12×40 2 GB/T5783 More Than 3 Spacer
6 Washer 12 2 GB/T93
7 Washer 2 W2.5C-03D-02-06
8 HST Gasket 1 W2.0-03(R)-02-12
9 Bolt M12×1.25×60 4 GB/T5785 8.8
10 Washer 12 4 GB/T97.1 Japanese HST
11 Washer 12 1 GB/T97.1 Korean HST
12 Gearbox Assy 1 W3.5H-03A-02-05-00 85 Gearbox

- 148 -
HST Assy

- 149 -
 HST Assy

NO. Description QTY Part Code Note

1 HST Pump 1 W2.0-03(R)-03B-01-00 45CC
2 Gear 1 ZKB80-307-001
3 Circlip for Shaft 24 1 GB/T894
4 Washer 1 W2.0-03(R)-03-03A
5 HST Bearing 6007 1 W2.0-03(R)-03A-04
6 O Ring 58×1.8 1 GB/T3452.1
7 Pin φ8X16 2 GB/T119.1

- 150 -
HST Connector (Canopy Type)

- 151 -
 HST Connector (Canopy Type)

NO. Description QTY Part Code Note

1 Bolt M8×20 1 GB/T5783
2 Washer 8 1 GB/T93
3 Plate 1 W2.5C-03D-10-07
4 Spline Shaft 1 W2.5C-03D-10-05
5 Retaining Ring 72 1 GB/T893.1
6 HST Bearing 6306-RS 1 W2.5D-03-10-12
7 HST Bearing 6205-RS 1 W2.0-03-10A-17
8 Washer 10 4 GB/T93
9 Bolt M10×30 4 GB/T5783
10 Key 8×45 1 GB/T1096
11 Washer 12 2 GB/T93
12 Bolt M12×40 2 GB/T5783
13 Belt Pulley 1 W2.5C-03D-10-06
14 Flange Plate 1 W2.5C-03D-10-04
15 Spline Sleeve 1 W2.0-03-10-03
16 Gasket 1 W2.0-03(R)-10-12
17 Retaining Ring for Bore 23 1 GB/T893.1

- 152 -
HST Connector (Cabin Type)

- 153 -
 HST Connector (Cabin Type)

NO. Description QTY Part Code Note

1 Pin 4×32 1 GB/T91
2 Nut M20 1 GB/T6181
3 Retaining Ring 1 WD.4M.10-06
4 Sleeve 1 W2.5E-03A-10-01
5 Belt Pulley 1 W2.5C-03D-10-06A
6 Key 8×45 1 GB/T1096
7 Circlip for Bore 72 1 GB/T893.1
8 HST Bearing 6306-RS 1 W2.5D-03-10-12
9 Spline Shaft 1 WD.4M.10-02
10 HST Bearing 6205-RS 1 W2.0-03-10A-17
11 Bolt M12×40 2 GB/T5783
12 Washer 12 2 GB/T93
13 Flange Plate Weld 1 W2.5E-03B-10-01-00
14 Circlip for Bore 23 1 GB/T893.1
15 Spline Sleeve 1 W2.0-03-10-03
16 Gasket 1 W2.0-03(R)-10-12
17 Bolt M10×30 4 GB/T5783
18 Washer 10 4 GB/T93

- 154 -
Working Tension Pulley Assy

- 155 -
 Working Tension Pulley Assy

NO. Description QTY Part Code Note

1 Nut M16 1 GB/T6170
2 Washer 16 1 GB/T93
3 Washer 16 1 GB/T97.1
4 Tension Shaft 1 W2.5D-03-10-02
5 Plate, Adjusting 1 W2.5D-03-10-07
6 Washer 1 W2.5D-03-10-08
7 Washer 8 1 GB/T93
8 Bolt M8×20 1 GB/T5783
9 Retaining Ring for Shaft 20 1 GB/T894.2
10 Tension Arm Weld 1 W2.5DA-03H-17C-01-00
11 Tension Pulley Assy 1 W2.5K-02SA-09A-01-00
12 Plate Weld 1 W2.5DA-03H-17C-08-00
13 Bearing 2 W2.5D-03-10-11-02
14 Oil Cup M6 1 GB/T1152
15 Spring 1 W2.5DA-03H-17A-05A
16 Rod Weld 1 W2.5DA-03H-17A-06-00
17 Ball Seat 1 W2.5-03-10-03
18 Nut M12 2 GB/T6170
19 Plate, Adjusting 1 W2.5D-03-10-07
20 Nylon Sleeve 1 W2.5DA-03H-17B-10

- 156 -
Safety Railing Assy

- 157 -
 Safety Railing Assy

NO. Description QTY Part Code Note

1 Bolt M10×60 4 GB/T5782
2 Washer 10 4 GB/T97.1
3 Nut M10 4 GB/T6170
4 Washer 10 4 GB/T93
5 Safety Railing Weld 1 W2.5DA-03HX-18-01-00

- 158 -
Pedal Assy (Cabin Type)

- 159 -
 Pedal Assy (Cabin Type)

NO. Description QTY Part Code Note

1 Pedal Assy , Upper 1 W3.5-03A-16-01-00
2 Pedal Assy , Lower 1 W2.5DA-03H-16-02-00
3 Rotating Shaft 2 W2.5DA-03H-16-03
4 Bolt M10×55 1 GB/T5782
5 Spring Washer 10 4 GB/T93
6 Washer 10 4 GB/T97.1
7 Washer, Big 10 4 GB/T96
8 Nut M10 4 GB/T6170
9 Bolt M10×25 1 GB/T5783
10 Bolt M10×65 2 GB/T5782

- 160 -
Pedal Assy (Canopy)

- 161 -
 Pedal Assy (Canopy)

NO. Description QTY Part Code Note

1 Pedal Assy , Upper 1 W3.5B-03-16-01-00
2 Pedal Assy , Lower 1 W3.5B-03-16-02-00
3 Rotating Shaft 2 W2.5DA-03H-16-03
4 Bolt M10×55 4 GB/T5783
5 Spring Washer 10 4 GB/T93
6 Washer 10 4 GB/T97.1

- 162 -
Support Roller Assy

- 163 -
 Support Roller Assy

NO. Description QTY Part Code Note

1 Retaining Ring 2 W1.8-33-06-08
2 Cover 2 W1.8-33-06-01
3 Bolt M12×1.5×30 2 GB/T5786
4 Washer 12 2 GB/T93
5 Washer 2 W1.8-33-06-07
Bearing 6305-RS/P6, Support
6 Roller 4 W2.5DX-03C-06-02
7 Sleeve 2 W1.8-33-06-02
8 Sleeve 2 W2.5DX-03C-06-05-00
9 Oil Seal Assy 2 W1.8-33-06-04-00A
10 Press Cover, Outside 2 W2.5DX-03C-06-10
11 Support Roller Weld 2 W2.5DX-03C-06-01-00
12 Shaft 1 WD.4MC.32-06

- 164 -
Balance Roller Assy

- 165 -
 Balance Roller Assy

NO. Description QTY Part Code Note

1 Retaining Ring 2 W1.8-33-06-08
2 Cover 2 W1.8-33-06-01
3 Bolt M12×1.5×30 2 GB/T5786
4 Washer 12 2 GB/T93
5 Washer 2 W1.8-33-06-07
Bearing 6305-RS/P6, Support
6 Roller 4 W2.5DX-03C-06-02
7 Sleeve 2 W1.8-33-06-02
8 Sleeve 2 W2.5DX-03C-06-05-00
9 Oil Seal Assy 2 W1.8-33-06-04-00A
10 Press Cover, Outside 2 W2.5DX-03C-06-10
11 Balance Roller Weld 2 W2.5DX-03C-07-01-00
12 Shaft 1 WD.4MC.32-06

- 166 -
Support Roller Assy

- 167 -
 Support Roller Assy

NO. Description QTY Part Code Note

1 Retaining Ring 2 W1.8-33-06-08
2 Cover 2 W1.8-33-06-01
3 Bolt M12×1.5×30 2 GB/T5786
4 Washer 12 2 GB/T93
5 Washer 2 W1.8-33-06-07
Bearing 6305-RS/P6,
6 Support Roller 4 W2.5DX-03C-06-02
7 Sleeve 2 W1.8-33-06-02
8 Sleeve 2 W2.5DX-03C-06-05-00
9 Oil Seal Assy 2 W1.8-33-06-04-00A
10 Press Cover, Outside 2 W2.5DX-03C-06-10
11 Balance Roller Weld 2 W3.5H-03A-28-01-00
12 Shaft 1 WD.4ME.28-06

- 168 -
Tension Pulley Assy

- 169 -
 Tension Pulley Assy

NO. Description QTY Part Code Note

1 Spring pin 1 W2.5DA-03H-27-10
2 Plate, Limiter 1 WD.4FE.27-04
3 Adjusting Screw 1 WD.4FE.27-03
4 Plate Weld, Limiter 1 WD.4FE.27.1
5 Frame Weld, Tension 1 WD.4ME.27.2A
6 Nut M16 2 GB/T6170
7 Washer 16 2 GB/T93
8 Retaining Ring 2 L18X.4.27-04
9 Press Plate 2 L18X.4.29-02
10 Oil Seal Assy 2 W2.5DA-03H-27-06-00B
Bearing 6306-RS/P63, Tension
11 Pulley, Rubber Track 2 W2.5DA-03H-27-12
12 Tension Pulley 1 WD.4MC.27-01
13 Tension Pulley Shaft 1 W2.5DA-03B-27-08
14 Sleeve 1 L18X.4.27-03

- 170 -
Middle Support Assy

- 171 -
 Middle Support Assy

NO. Description QTY Part Code Note

1. Bolt M8×55 4 GB/T5783
2. Washer 8 4 GB/T93
3. Washer 8 8 GB/T96
4. Nut M8 4 GB/T6170
5. Support Frame Assy, Middle 1 W2.5M-03F-50-01-00
6. Bolt M10×25 2 GB/T5783
7. Washer 10 8 GB/T96
8. Washer 10 8 GB/T93
9. Nut M10 4 GB/T6170
10. Support Weld, Middle 1 W2.5M-03F-50-02-00
11. Bolt M10×55 2 GB/T5783

- 172 -
V Engine
(Sack Type)

- 173 -
Engine Assy W3.5H-09X-01-00 (Sack Type)

- 174 -
 Engine Assy W3.5H-09X-01-00 (Sack Type)

NO. Description QTY Part Code Note

1 Engine (74.5KW) 1 4G33TC-2017218
2 Shock-absorbing Cushions, Engine 3 W2.0-03-05-09-00
3 Supporter, Engine, Front, External 1 W2.5C-03-05-04-00
4 Supporter, Engine, Rear, External 1 W2.5C-03-05-03-00
5 Nut M12×1.5 6 GB6176-86
6 Cushion12 12 GB93-87
7 Washer, Big 12 5 GB96-85
8 Bolt M10×25 10 GB5783-86
9 Cushion 10 16 GB93-87
10 Bolt M14x30 8 GB5783-86
11 Cushion 14 8 GB93-87
12 Bolt M12×40 6 GB5783-86
13 Belt Pulley, Engine 1 W2.5C-03D-05G-02
14 Nut M8 8 GB6170-86
15 Cushion 8 12 GB93-87
16 Air Intake Hose Assy 1 W3.5H-09-01-01-00
17 Air Filter 1 W2.5DA-03H-05-12-00
18 Bolt M8×20 6 GB5783-86
19 Washer, Plain 8 12 GB97.1-85
20 Throat Hoop, Steel, 60-80 2 Q67676
21 Exhaust Hose Weld 1 W3.5-09A-01-14-00
22 Internal Support, Engine 1 W2.5-03-05-04-00
23 Muffler 1 W3.5-09A-01-10-00
24 Hoop Weld 1 W2.0-03-05-13-00
25 Bolt M10×50 1 GB5782-86
26 Nut M10 5 GB6170-86
27 Washer, Plain 10 15 GB97.1-85
28 Cushion 1 WD.20-03
29 Rod Weld, Limiter, Belt 1 W2.5DA-03H-05D-05-00
30 Bolt M10X35 1 GB5783-86
31 Bolt M8X16 3 GB5783-86
32 Thermal Baffle, Air Intake Hose 1 W2.5DA-03EK-05-13
33 Fixing Bracket, Oil Hose 1 W2.5D-03-05-01
34 Fixing Bracket Weld, Air Filter 1 W2.5D-03-05-09-00
35 Cushion 8 2 GB93-87
36 Supporter, Engine, Front, Internal 1 W2.5DA-03A-05-01-00
37 Steel Sleeve, Shock-absorbing 1 W2.5DA-03H-05-13 1
38 Bolt M10X30 2 GB5783-86
39 Gasket, Exhaust Hose 1 W2.5DA-03EK-05-15

- 175 -
Fuel Tank Assy W2.5DA-03H-04-00SP

- 176 -
 Fuel Tank Assy W2.5DA-03H-04-00SP

NO. Description QTY Part Code Note

1 Fuel Tank Weld 1 W2.5DA-03H-04-02-00SP
2 Steel Flat Bar, Fuel Tank Fixing 2 W2.5DA-03H-04-05-00
3 Sponge, Bottom 2 W2.5DA-03H-04-06
4 Strainer 1 WD.4FE.8-02
5 Cover Assy , Fuel Filling 1 W2.5DA-03H-04-01-00SP
6 Plate 1 W2.0-03-04-06
7 Strainer, Fuel Absorption 1 W2.0-03-04-08-03
8 Washer 18 1 JB982-77
9 Fuel Absorption Pipe Assy 1 W2.5DA-03H-04-08-00
10 Bolt M6X16 5 GB/T5783-86
11 Gasket 6 5 GB/93-87
12 Gasket 6 5 GB97.1-85
13 Fuel Intake Hose 1 W2.5-03-04-03
14 Throat Hoop Ø12~Ø20 7 HG
15 Display Hose, Fuel Level 1 W2.5DA-03H-04-04
16 Throat Hoop ØC9～ØC13 2 HG
17 Pin Shaft C8X50 2 GB882-86
18 Pin 3.2×18 2 GB91-86
19 Washer 8 2 GB97.1-85
20 Fuel Level Sensor 1 W3.5H-09-02-01
21 Rubber Cushion, Sensor 1 4LZ2A.19.1-03
22 Nut M8 6 GB6170-86
23 Bolt M8X120 2 GB5783-86 Sack Type
24 Gasket 8 4 GB97.1-85
25 Sponge, Steel Flat Bar 2 W2.5DA-03H-04-07
26 Gasket 8 2 GB93-87
27 Fuel Outlet Hose 1 W2.5DA-03H-04-11
28 Connecting Hose, Oil Returning 1 W2.5DA-03H-04-12
29 Bolt M5×12 5 GB818-2000
30 Gasket 5 5 GB93-87

- 177 -
 VI Engine
(Canopy, Grain Tank Type)

- 178 -
Engine Assy W3.5H-09-01-00SP (Upper Exhaust)

- 179 -
 Engine Assy W3.5H-09-01-00SP (Upper Exhaust)

NO. Description QTY Part Code Note

1 Engine (74.5KW) 1 4G33TC17218
2 Shock-absorbing Cushions, Engine 3 W2.0-03-05-09-00
3 Supporter, Engine, Front, External 1 W2.5C-03-05-04-00
4 Supporter, Engine, Rear, External 1 W2.5C-03-05-03-00
5 Nut M12×1.5 6 GB/T6176
6 Cushion 12 12 GB/T93-87
7 Washer, Big 12 5 GB/T96-85
8 Bolt M10×25 10 GB5783-86
9 Cushion 10 16 GB93-87
10 Bolt M14x30 8 GB5783-86
11 Cushion 14 8 GB93-87
12 Bolt M12×40 6 GB5783-86
13 Belt Pulley, Engine 1 W2.5C-03D-05G-02
14 Nut M8 13 GB6170-86
15 Cushion 8 21 GB93-87
16 Bolt M8×25 4 GB5783-86
17 Washer, Big 8 10 GB96-85
18 Air Filter, Dust Self-exhausting 1 K35C9-A
19 Air Intake Hose Assy 1 W2.5DA-03H-05A-08-00
20 Bolt M8×20 4 GB5783-86
21 Washer, Plain 8 13 GB97.1-85
22 Fixing Bracket Weld, Air Filter 1 W2.5D-03-05-09-00
23 Throat Hoop, Steel, 70-90 1 Q67676
24 Throat Hoop, Steel, 60-80 1 Q67676
25 Bolt M8×16 3 GB5783-86
26 Thermal Baffle, Air Intake Hose 1 W2.5DA-03EK-05-13
27 Rod Weld, Limiter, Belt 1 W2.5DA-03H-05D-05-00
28 Washer, Plain 10 2 GB97.1-85
29 Gasket, Exhaust Pipe 1 W2.5DA-03EK-05-15
30 Exhaust Pipe Weld 1 1 W2.5DA-03EK-05-01-00SP
31 Exhaust Pipe Weld 2 1 W2.5DA-03EK-05-02-00SP
32 Cover, Upper 1 W2.5DA-03EK-05-03SP
33 Cover, Lower 1 W2.5DA-03EK-05-04SP
34 Nut M10 2 GB6170-86
35 Bolt M10X35 2 GB5783-86
36 Washer, Big 10 2 GB96-85
37 Supporter, Engine, Front, Internal 1 W2.5DA-03A-05-01-00

- 180 -
Engine Assy W3.5H-09-01-00SP (Upper Exhaust)

- 181 -
 Engine Assy W3.5H-09-01-00SP (Upper Exhaust)

NO. Description QTY Part Code Note

Supporter, Engine, Rear,
38 Internal 1 W2.5-03-05-04-00
39 Fixing Bracket, Fuel Hose 1 W2.5D-03-05-01
40 Bolt M8×18 4 GB5783-86
41 Bolt M8×14 4 GB5783-86
42 Installation Seat Ⅱ 2 W2.5DA-03EK-05-02-03SP
43 Reinforced Iron 1 W2.5DA-03EK-05-01-03SP

- 182 -
Engine Assy ,102HP, Grain Tank (Lower Exhaust)

- 183 -
 Engine Assy ,102HP, Grain Tank (Lower Exhaust)

NO. Description QTY Part Code Note

1 Engine (74.5KW) 1 4G33TC-2017218
2 Shock-absorbing Cushions, Engine 3 W2.0-03-05-09-00
3 Supporter, Engine, Front, External 1 W2.5C-03-05-04-00
4 Supporter, Engine, Rear, External 1 W2.5C-03-05-03-00
5 Nut M12×1.5 6 GB6176-86
6 Cushion12 12 GB93-87
7 Washer, Big 12 5 GB96-85
8 Bolt M10×25 10 GB5783-86
9 Cushion 10 16 GB93-87
10 Bolt M14x30 8 GB5783-86
11 Cushion14 8 GB93-87
12 Bolt M12×40 6 GB5783-86
13 Belt Pulley, Engine 1 W2.5C-03D-05G-02
14 Nut M8 8 GB6170-86
15 Cushion 8 12 GB93-87
16 Air Intake Hose Assy 1 W3.5H-09-01-01-00
17 Air Filter, Dust Self-exhausting 1 K35C9-A
18 Bolt M8×20 6 GB5783-86
19 Washer, Plain 8 12 GB97.1-85
20 Throat Hoop, Steel, 60-80 2 Q67676
21 Exhaust Pipe Weld 1 W3.5-09A-01-14-00
22 Supporter, Engine, Internal 1 W2.5-03-05-04-00
23 Muffler 1 W3.5-09A-01-10-00
24 Hoop Weld 1 W2.0-03-05-13-00
25 Bolt M10×50 1 GB5782-86
26 Nut M10 5 GB6170-86
27 Washer, Plain 10 15 GB97.1-85
28 Cushion 1 WD.20-03
29 Rod Weld, Limiter, Belt 1 W2.5DA-03H-05D-05-00
30 Bolt M10X35 1 GB5783-86
31 Bolt M8X16 3 GB5783-86
32 Thermal Baffle, Air Intake Hose 1 W2.5DA-03EK-05-13
33 Fixing Bracket, Fuel Hose 1 W2.5D-03-05-01
34 Fixing Bracket Weld, Air Filter 1 W2.5D-03-05-09-00
35 Cushion 8 2 GB93-87
36 Supporter, Engine, Front, Internal 1 W2.5DA-03A-05-01-00
37 Steel Sleeve, Shock-absorbing 1 W2.5DA-03H-05-13
38 Bolt M10X30 2 GB5783-86
39 Gasket, Exhaust Pipe 1 W2.5DA-03EK-05-15

- 184 -
Fuel Tank Assy

- 185 -
 Fuel Tank Assy

NO. Description QTY Part Code Note

1 Fuel Tank Weld 1 W2.5DA-03H-04-02-00SP
2 Steel Flat Bar, Fuel Tank Fixing 2 W2.5DA-03H-04-05-00
3 Sponge, Bottom 2 W2.5DA-03H-04-06
4 Strainer 1 WD.4FE.8-02
5 Cover Assy , Fuel Filling 1 W2.5DA-03H-04-01-00SP
6 Plate 1 W2.0-03-04-06
7 Strainer, Fuel Absorption 1 W2.0-03-04-08-03
8 Washer 18 1 JB982-77
9 Pipe Assy, Fuel Absorption 1 W2.5DA-03H-04-08-00
10 Bolt M6X16 5 GB/T5783-86
11 Gasket 6 5 GB/93-87
12 Gasket 6 5 GB97.1-85
13 Fuel Intake Hose 1 W2.5-03-04-03
14 Throat Hoop Ø12~Ø20 7 HG
15 Display Hose, Fuel Level 1 W2.5DA-03H-04-04
16 Throat Hoop ØC9～ØC13 2 HG
17 Pin Shaft C8X50 2 GB882-86
18 Pin 3.2×18 2 GB91-86
19 Washer 8 2 GB97.1-85
20 Fuel Level Sensor 1 W3.5H-09-02-01
21 Rubber Cushion, Sensor 1 4LZ2A.19.1-03
22 Nut M8 6 GB6170-86
23 Bolt M8X120 2 GB5783-86
24 Gasket 8 4 GB97.1-85
25 Sponge, Steel Flat Bar 2 W2.5DA-03H-04-07
26 Gasket 8 2 GB93-87
27 Fuel Outlet Hose 1 W2.5DA-03H-04-11
28 Connecting Hose, Oil Returning 1 W2.5DA-03H-04-12
29 Bolt M5×12 5 GB818-2000
30 Gasket 5 5 GB93-87

- 186 -
VII Engine
(Cabin Type)

- 187 -
Engine Assy W3.5H-09F-01-00SP(Upper Exhaust)

- 188 -
 Engine Assy W3.5H-09F-01-00SP(Upper Exhaust)

NO. Description QTY Part Code Note

1 Engine Power 102HP 1 74.5KW/1500W/12V/2600RPM
Shock-absorbing Cushions,
2 Engine 3 W2.0-03-05-09-00
3 Support, Engine, Front, External 1 W2.5C-03-05-04-00
4 Support, Engine, Rear, External 1 W2.5C-03-05-03-00
5 Nut M12×1.5 6 GB6176-86
6 Cushion12 12 GB93-87
7 Washer, Big 12 5 GB96-85
8 Bolt M10×25 10 GB5783-86
9 Cushion 10 16 GB93-87
10 Bolt M14x30 8 GB5783-86
11 Cushion 14 8 GB93-87
12 Bolt M12×40 6 GB5783-86
13 Belt Pulley, Engine 1 W5.0-03A-05-02
14 Cushion 8 23 GB93-87
15 Air Intake Hose Assy 1 W2.5M-03F-05-08-00
16 Air Filter, Dust Self-exhausting 1 W2.5M-03F-05-12-00A
17 Bolt M8×20 6 GB5783-86
18 Washer, Plain 8 16 GB97.1-85
19 Throat Hoop, Steel, 60-80 1 Q67676
20 Plate Seat 1 W2.5DA-03EK-05-01-01SP
21 Supporter, Engine, Internal 1 W2.5-03-05-04-00
22 Reinforced Iron 1 W2.5DA-03EK-05-01-03SP
23 Installation Seat 2 2 W2.5DA-03EK-05-02-03SP
24 Exhaust Pipe Weld 2 1 W2.5DA-03EK-05-02-00SP
25 Installation Seat 1 W2.5DA-03EK-05-02-02SP
26 Cover, Upper 1 W2.5DA-03EK-05-03SP
27 Cover, Lower 1 W2.5DA-03EK-05-04SP
28 Rod Weld, Limiter, Belt 1 W2.5DA-03H-05D-05-00
29 Bolt M8×14 4 GB/T5783-86
30 Bolt M8X16 3 GB5783-86
31 Thermal Baffle, Air Intake Hose 1 W2.5DA-03EK-05-13
32 Fixing Bracket, Fuel Hose 1 W2.5D-03-05-01
33 Supporter, Engine, Front, 1 W2.5DA-03A-05-01-00
34 Internal
Nut M8 4 GB6170-86
35 Bolt M10×30 2 GB5783-86

- 189 -
Engine Assy W3.5H-09F-01-00SP(Upper Exhaust)

- 190 -
 Engine Assy W3.5H-09F-01-00SP(Upper Exhaust)

NO. Description QTY Part Code Note

36 Washer, Big 10 4 GB96-85
37 Nut M8 9 GB6170-86
38 Nut M8 4 GB804-88
39 Throat Hoop, Steel, 70-90 1 Q67676
40 Gasket, Exhaust Pipe 1 W2.5DA-03EK-05-15
41 Gasket Assy, Air Filter 1 W2.5M-03F-05-04-00
42 Bolt M8X18 4 GB5783-86
43 Washer, Plain, Big 8 8 GB96-85

44 Belt Pulley, Engine 1 W5.0-03D-05-02

45 Exhaust Hose Weld Ⅰ 1 W2.5DA-03EK-05-01-00SP

- 191 -
Engine Assy W3.5H-09F-01-00(Lower Exhaust)

- 192 -
 Engine Assy W3.5H-09F-01-00(Lower Exhaust)

NO. Description QTY Part Code Note

74.5kw,1500W,12V,2600r/min
1 4G33TC-2017219 1 Changchai 102HP
2 Shock-absorbing Cushions, Engine 3 W2.0-03-05-09-00
3 Supporter, Engine, Front, External 1 W2.5M-03F-05-01-00
4 Supporter, Engine, Rear, External 1 W2.5C-03-05-03-00
5 Nut M12×1.5 6 GB6176-86
6 Cushion12 12 GB93-87
7 Washer, Big 12 5 GB96-85
8 Bolt M10×25 10 GB5783-86
9 Cushion 10 19 GB93-87
10 Bolt M14x30 8 GB5783-86
11 Cushion 14 8 GB93-87
12 Bolt M12×40 6 GB5783-86
13 Belt Pulley, Engine 1 W5.0-03A-05-02
14 Cushion 8 16 GB93-87
15 Air Intake Hose Assy 1 W2.5M-03F-05-08-00
16 Air Filter, Dust Self-exhausting 1 W2.5M-03F-05-12-00A
17 Bolt M8×20 7 GB5783-86
18 Washer, Plain 8 16 GB97.1-85
19 Throat Hoop, Steel, 60-80 1 Q67676
20 Exhaust Pipe Weld 1 W3.5-09A-01-14-00
21 Supporter, Engine, Internal 1 W2.5-03-05-04-00
22 Muffler 1 W3.5-09A-01-10-00
23 Hoop Weld 1 W2.0-03-05-13-00
24 Bolt M10×50 1 GB5782-86
25 Nut M10 2 GB6170-86
26 Washer, Plain 10 18 GB97.1-85
27 Cushion 1 WD.20-03
28 Rod Weld, Limiter, Belt 1 W2.5DA-03H-05D-05-00
29 Bolt M10X35 1 GB5783-86
30 Bolt M8X16 3 GB5783-86
31 Thermal Baffle, Air Intake Hose 1 W2.5DA-03EK-05-13
32 Fixing Bracket, Fuel Hose 1 W2.5D-03-05-01
33 Supporter, Engine, Front, Internal 1 W2.5DA-03A-05-01-00
34 Bolt M10×35 2 GB5783-86
35 Bolt M10×30 2 GB5783-86

- 193 -
Engine Assy W3.5H-09F-01-00(Lower Exhaust)

- 194 -
 Engine Assy W3.5H-09F-01-00(Lower Exhaust)

NO. Description QTY Part Code Note

36 Washer, Big 10 4 GB96-85
37 Nut M8 9 GB6170-86
Steel Sleeve, Shock-
38 absorbing 1 W2.5DA-03H-05-13
39 Throat Hoop, Steel, 70-90 1 Q67676
40 Gasket, Exhaust Hose 1 W2.5DA-03EK-05-15
41 Plate Weld, Air Filter 1 W2.5M-03F-05-04-00

- 195 -
Radiator Assy (Cabin)

- 196 -
 Radiator Assy (Cabin)

NO. Description QTY Part Code Note

1 Radiator 1 W2.5M-03F-11-01-00
2 Bolt M12X30 2 GB/T5783-86
3 Washer, Plain 12 6 GB97.1-85
4 Nut M12 6 GB/T6170-86
5 Lower Water Pipe 1 W2.5M-03F-11-05
6 Gasket, Water Tank 2 4LZ1.6.3C-06
7 Seat Weld, Water Tank 1 W2.5E-03K-11-09-00
8 Throat Hoop, Steel, 44-48 4
9 Upper Water Pipe 1 W2.5E-03K-11-02
10 Cushion 12 2 GB93-87
11 Support Rod, Radiator 1 W2.5E-03-11-08
12 Bolt M8X20 4 GB/T5783-86
13 Washer, Plain 8 4 GB97.1-85
14 Cushion 8 6 GB93-87
15 Nut M8 4 GB/T6170-86
16 Bolt M8X16 2 GB5783-86
17 Auxiliary Water Tank 1 W2.0-03B-11-10
18 Hoop 12 2 Q673B
19 Support Rod Weld, Rear 1 W2.5M-03F-11-06-00
Steel Flat Bar, Auxiliary
20 Water Tank 1 W2.5M-03F-11-07
21 Washer, Plain, Big 8 2 GB96-85
22 Bolt M6X25 1 GB5783-86
23 Washer, Plain 6 1 GB97.1-85
24 Cushion 6 1 GB93-87
25 Nut M6 1 GB/T6170-86
26 Sponge Gasket Ⅰ 1 W2.5M-03F-11-08
27 Sponge Gasket Ⅱ 1 W2.5M-03F-11-09
28 Radiator 1 W2.5E-03K-11-01-00

29 Lower Water Pipe 1 W2.5E-03K-11-05

30 Connecting Seat 1 W2.5M-03F-11-06-03
31 Bottom Seat 1 W2.5M-03F-11-06-02

- 197 -
Fuel Tank Assy W2.5DA-03H-04-00SP

- 198 -
 Fuel Tank Assy W2.5DA-03H-04-00SP

NO. Description QTY Part Code Note

1 Fuel Tank Weld 1 W2.5DA-03H-04-02-00SP
2 Steel Flat Bar, Fuel Tank Fixing 2 W2.5DA-03H-04-05-00
3 Sponge, Bottom 2 W2.5DA-03H-04-06
4 Strainer 1 WD.4FE.8-02
5 Cover Assy , Fuel Filling 1 W2.5DA-03H-04-01-00SP
6 Plate 1 W2.0-03-04-06
7 Strainer, Fuel Absorption 1 W2.0-03-04-08-03
8 Washer 18 1 JB982-77
9 Pipe Assy, Fuel Absorption 1 W2.5DA-03H-04-08-00
10 Bolt M6X16 5 GB/T5783-86
11 Gasket 6 5 GB/93-87
12 Gasket 6 5 GB97.1-85
13 Fuel Intake Hose 1 W2.5-03-04-03
14 Throat Hoop Ø12~Ø20 7 HG
15 Display Hose, Fuel Level 1 W2.5DA-03H-04-04
16 Throat Hoop ØC9～ØC13 2 HG
17 Pin Shaft B C8X50 2 GB882-86
18 Pin 3.2×18 2 GB91-86
19 Washer 8 2 GB97.1-85
20 Fuel Level Sensor 1 W3.5H-09-02-01
21 Rubber Cushion, Sensor 1 4LZ2A.19.1-03
22 Nut M8 6 GB6170-86
23 Bolt M8X120 2 GB5783-86 Sack Type
24 Gasket 8 4 GB97.1-85
25 Sponge, Steel Flat Bar 2 W2.5DA-03H-04-07
26 Gasket 8 2 GB93-87
27 Fuel Outlet Hose 1 W2.5DA-03H-04-11
28 Connecting Hose, Oil Returning 1 W2.5DA-03H-04-12
29 Bolt M5×12 5 GB818-2000
30 Gasket 5 5 GB93-87

- 199 -
VIII Hydraulic Part
(Sack Type)

- 200 -
Hydraulic Valve Assy W2.5DD-05DX-00 (Sack Type)

- 201 -
 Hydraulic Valve Assy W2.5DD-05DX-00 (Sack Type)

NO. Description QTY Part Code Note

1 Oil Filter Assy 1 W2.5DA-05D-13-00
Oil Returning Hose, Oil
2 Radiator 1 W2.0-05-02 88HP Engine
3 Hydraulic Oil Tank Assy 1 W2.5DD-05DX-01-00A
Oil Returning Hose, Reel
4 Valve 1 W2.5DD-05DB-02-00
5 One-Way Valve Assy 1 W2.0-05-31-00
6 Coupling Oil Pipe Assy 1 W2.5E-05GB-10-00
7 Washer 18 35 JB982-77
8 Bolt M18×1.5,Hollow 17 L1.8A-04-04
9 Main Oil Pipe Assy , Reel 1 W2.5DD-05DB-04-00
Multifunctional Slide
10 Valve Assy 1 W2.5DD-05DC-02-00
11 Main Oil Pipe, A, Header 1 W2.5DD-05DC-03-00
Oil Distributing Pipe
12 Assy , Right, Reel 1 W2.5DD-05D-02-00
Oil Distributing Pipe
13 Assy , Left, Reel 2 W2.5DD-05DB-06-00
14 Oil Cylinder, Reel 2 W2.5F-05-10-00
15 Oil Cylinder, Header 1 W2.5E-05-01-00
16 T Connector 1 W2.5DD-05D-11
Steering Oil Cylinder SL-
17 JZXGB 1 W2.0-05-33
Oil Pipe Assy , Left
18 Steering 1 W2.5DD-05DB-07-00
Oil Pipe Assy , Right
19 Steering 1 W2.5DD-05DB-08-00
Oil Returning Hose Assy ,
20 Steering 1 W2.5DD-05DB-09-00
21 Washer 27 1 JB982-77
22 Connector, Oil Inlet 1 WD.7M-02
23 Connector, Oil Outlet 1 W2.0-05-30-00
24 Oil Inlet Pipe Assy ,HST 1 W2.5DD-05DC-14-00
25 Oil Inlet Pipe, Cooler 1 W2.0-05-17 88HP Engine
Oil Inlet Pipe Assy , Gear
26 Pump 1 W2.5DD-05DC-12-00
27 Oil Inlet Pipe Assy , Valve 1 W2.5DD-05DX-02-00
28 Throat Hoop, Steel, 27 6
Oil Distributing Pipe
29 Assy , Left, Reel 1 W2.5DD-05D-07-00
30 Connector, Reel Cylinder 2 W2.5DD-05D-08
Connector, Oil Pipe,
31 Steering Cylinder 3 W2.5DD-05D-09
- 202 -
32 Gear Pump CBN-F312 1 W2.5DD-05DC-09-00A Left rotation
Connector, Oil Outlet, Oil
33 Filling Pump 1 W2.0-05(R)-34
34 Throat Hoop, Steel, 32 1
35 Bolt M8X30 2 GB70-85 YuchaiM8X50

- 203 -
Hydraulic Valve Assy W2.5DD-0.5DX-00(Sack Type)

- 204 -
 Hydraulic Valve Assy W2.5DD-0.5DX-00(Sack Type)

NO. Description QTY Part Code Note

36 Washer 8 10 GB93-87
37 Bolt M8X25 4 GB5783-86 Yuchai M8X45
38 Connector, HST 1 W2.0-05(R)-35
Oil Pipe, Oil Filter, Oil
39 Inlet Pump 1 W2.0-05(R)-36
Oil Inlet Pipe, HST, Oil
40 Filter 1 W2.5DA-05D-12
41 Washer 21 1 JB982-77
42 Washer 20 1 JB1002-77
43 O Ring 14×2.65 1 GB3452.1-83
44 Oil Pipe Assy , Header 1 W2.5DD-05D-10-00
Oil Distributing Pipe
45 Assy , Right, Reel 1 W2.5DD-05D-02-00A Optional2.2M
Oil Distributing Pipe
46 Assy , Left, Reel 1 W2.5DD-05D-07-00A Optional2.2M
47 Oil Inlet Pipe, Cooler 1 W2.5DA-05D-15
48 Oil Returning Pipe, Cooler 1 W2.5DA-05D-16 98HP Engine
49 Bolt, Hollow 1 W2.5D-05-02
50 Anti-loose Plate Assy 1 W2.5D-05-20-00
Gear Pump Oil
51 Washer 18 2 JB982-77 Outlet
Oil Returning Pipe, Two-
52 way Valve 1 W2.5DD-05DC-05-00
Oil Pipe B, Header
53 Cylinder 1 W2.5DD-05DC-04-00
54 Header Cylinder 1 W2.5DD-05DB-30-00
55 Connector 1 W2.5DD-05DB-33
56 Press Plate 1 W2.0B-05CD-06
57 Press Plate 2 W2.0B-05CD-07
58 Bolt M8X70 1 GB5782-86
59 Gasket 8 4 GB97.1-85
60 Gasket 8 1 GB93-86
61 Nut M8 1 GB6170-86
62 Bolt M22X1.5, Hollow 3 W2.5DD-05DC-13
63 Washer 22 6 JB982-77

- 205 -
IX Hydraulic Part
(Canopy, Grain Tank Type)

- 206 -
Hydraulic System W2.5DD-05TC-00(40 Grain Unloading Cylinder)

- 207 -
 Hydraulic System W2.5DD-05TC-00(40 Grain Unloading Cylinder)

NO. Description QTY Part Code Note

1 Oil Filter Assy 1 W2.5DA-05D-13-00
Oil Returning Hose, Oil
2 Radiator 1 W2.0-05-02
3 Hydraulic Oil Tank Assy 1 W2.5DD-05DB-01-00B
Oil Returning Hose, Reel
4 Valve 1 W2.5DD-05DB-02-00
5 One-way Valve Assy 1 W2.0-05-31-00
6 Coupling Oil Pipe Assy 1 W2.5E-05GB-10-00
7 Washer 18 50 JB982-77
8 Bolt M18×1.5, Hollow 24 L1.8A-04-04
9 Main Oil Pipe Assy , Reel 1 W2.5DD-05DB-04-00
Multifunctional Slide
10 Valve Assy 1 W2.5DD-05DC-02-00
11 Main Oil Pipe, A, Header 1 W2.5DD-05DC-03-00
Oil Distributing Pipe
12 Assy , Right, Reel 1 W2.5DD-05D-02-00 2.0m Header
Oil Distributing Pipe
13 Assy ,Lifting, Reel 2 W2.5DD-05DB-06-00
14 Oil Cylinder, Reel 2 W2.5F-05-10-00B
15 Oil Cylinder, Header 1 W2.5E-05-01-00
16 T Connector 1 W2.5DD-05D-11
Oil Cylinder,
17 Steering SL-JZXGB 1 W2.0-05-33
Oil Pipe Assy , Left
18 Steering 1 W2.5DD-05DB-07-00
Oil Pipe Assy , Right
19 Steering 1 W2.5DD-05DB-08-00
Oil Returning Hose Assy ,
20 Steering 1 W2.5DD-05DB-09-00
21 Washer 27 1 JB982-77
22 Connector, Oil Inlet 1 WD.7M-02
23 Connector, Oil Outlet 1 W2.0-05-30-00
24 Oil Inlet Pipe Assy ,HST 1 W2.5DD-05DC-14-00
25 Oil Inlet Pipe, Cooler 1 W2.0-05-17
Oil Inlet Pipe Assy , Gear
26 Pump 1 W2.5DD-05DC-12-00
Oil Inlet Pipe Assy ,
27 Valve 1 W2.5DA-05D-03-00
28 Throat Hoop, Steel, 27 8
Oil Distributing Pipe
29 Assy , Left, Reel 1 W2.5DD-05D-07-00 2.0m
30 Connector, Reel Cylinder 2 W2.5DD-05D-08
Connector, Oil Pipe,
31 Steering Cylinder 3 W2.5DD-05D-09
- 208 -
32 Gear Pump CBN-F312 1 W2.5DD-05DC-09-00A Left
Connector, Oil Outlet, Oil
33 Filling Pump 1 W2.0-05(R)-34
34 Throat Hoop, Steel, 32 1
35 Bolt M8X30 2 GB70-85 Yuchai M8X50
36 Washer 8 10 GB93-87
37 Bolt M8X25 4 GB5783-86 Yuchai M8X45
38 Connector, HST 1 W2.0-05(R)-35
Oil Pipe, Oil Filter, Oil
39 Inlet Pump 1 W2.0-05(R)-36

- 209 -
Hydraulic System W2.5DD-05TC-00(40 Grain Unloading Cylinder)

- 210 -
 Hydraulic System W2.5DD-05TC-00(40 Grain Unloading Cylinder)

NO. Description QTY Part Code Note

40 Oil Inlet Hose, Oil Filter, HST 1 W2.5DA-05D-12
41 Oil Returning Hose 1 W2.5DD-05DB-14
42 Joint Seat Assy 1 W1.8C-05-09-01-00
One-way Valve Assy , Grain
43 Unloading 1 W2.5DD-05GX-01-00
44 Coupling Oil Pipe Assy 1 W2.5DD-05DB-16-00
45 Grain Unloading Hose, Front 1 W2.5DD-05DB-17-00A
46 Connector, Unloading Cylinder 1 W2.0B-05-44A
47 Unloading Cylinder 1 W2.5DD-05GX-02-00EA
48 Unloading Pipe A 1 W2.5DD-05DC-07-00
49 Single Pipe Clamp 8 4 W2.5DD-05GX-04
50 Washer 21 1 JB982-77
51 Washer 20 1 JB1002-77
52 O Ring 14×2.65 1 GB3452.1-83
53 Unloading Hose, Rear 1 W2.5DD-05GX-03-00
54 Oil Hose Assy , Header 1 W2.5DD-05D-10-00
Oil Distributing Pipe Assy , Right,
55 Reel 1 W2.5DD-05D-02-00A Optional2.2m
Oil Distributing Pipe Assy , Left,
56 Reel 1 W2.5DD-05D-07-00A Optional2.2m
57 Oil Inlet Pipe, Cooler 1 W2.5DA-05D-15 98Horsepower Only
98 Horsepower
58 Oil Returning Hose, Cooler 1 W2.5DA-05D-16 Only
59 Bolt, Hollow 1 W2.5D-05-02
60 Anti-loose Plate Assy 1 W2.5D-05-20-00
61 Washer 18 2 JB982-77
62 Oil Returning Pipe, Two-way Valve 1 W2.5DD-05DC-05-00
63 Oil Pipe B, Header Cylinder 1 W2.5DD-05DC-04-00
64 Header Cylinder 1 W2.5DD-05DB-30-00
65 Connector 1 W2.5DD-05DB-33
66 Press Plate 1 W2.0B-05CD-06
67 Block 2 W2.0B-05CD-07
68 Bolt M8X65 1 GB5782-86
69 Gasket 8 4 GB97.1-85
70 Nut M8 1 GB6170-86
71 Bolt M22, Hollow 3 W2.5DD-05DC-13
72 Washer 22 6 JB982-77
73 Bolt M8X45 2 GB5783-86
74 Washer 8 4 GB96-85
75 Unloading Pipe A 1 W2.5DD-05DC-07-00A For W3.5 Model
76 Unloading Hose 1 W2.5DD-05GX-03-00A For W3.5 Model

- 211 -
X Hydraulic Part
(Cabin Type)

- 212 -
Hydraulic Valve Assy W2.5E-05GW-00 (Cabin Type)

- 213 -
 Hydraulic Valve Assy W2.5E-05GW-00 (Cabin Type)

NO. Description QTY Part Code Note

1 Oil Filter Assy 1 W2.5DA-05D-13-00
Oil Returning Hose, Oil
2 Radiator 1 W2.5M-05M-03
3 Hydraulic Oil Tank Assy 1 W2.5M-05M-01-00
Oil Returning Hose Assy ,
4 Multifunctional Valve 1 W2.5M-05M-04-00
5 Coupling Oil Pipe Assy 1 W2.5M-05M-05-00
6 Washer 18 36 JB982-77
7 Bolt M18×1.5, Hollow 16 L1.8A-04-04
8 Main Oil Pipe Assy , Reel 1 W2.5M-05M-06-00
Multifunctional Slide
9 Valve Assy 1 W2.5DD-05DC-02-00
Oil Pipe, B, Header
10 Cylinder 1 W2.5M-05M-16-00
11 Oil Pipe Assy ,Lifting, Reel 2 W2.5E-05GW-01-00
12 Oil Cylinder, Reel 2 W2.5F-05-10-00B
13 Header Cylinder 1 W2.5E-05-01-00
14 Oil Pipe Assy , Header 1 W2.5DD-05D-10-00
15 T Connector 1 W2.5DD-05D-11
Steering Cylinder SL-
16 JZXGB 1 W2.0-05-33
Oil Pipe Assy , Left
17 Steering 1 W2.5M-05M-07-00
Oil Pipe Assy , Right
18 Steering 1 W2.5M-05M-08-00
Oil Returning Hose Assy ,
19 Steering 1 W2.5M-05M-09-00
20 Washer 27 1 JB982-77
21 Connector, Oil Inlet 1 WD.7M-02
22 Connector, Oil Outlet 1 W2.0-05-30-00
23 Oil Inlet Pipe Assy ,HST 1 W2.5M-05M-15-00
24 Oil Inlet Pipe, Cooler 1 W2.0-05-17
Oil Inlet Pipe Assy , Gear
25 Pump 1 W2.5DD-05DC-12-00
26 Oil Inlet Pipe Assy , Valve 1 W2.5M-05M-10-00
27 Throat Hoop, Steel, 27 6
28 Connector, Reel Cylinder 2 W2.5DD-05D-08
Connector, Oil Pipe,
29 Steering Cylinder 3 W2.5DD-05D-09
30 Gear Pump CBN-F312 1 W2.5DD-05DC-09-00A
Connector, Oil Outlet, Oil
31 Filling Pump 1 W2.0-05(R)-34
32 Throat Hoop, Steel, 32 1
- 214 -
33 Bolt M8X30 1 GB70-85
34 Washer 8 9 GB93-87
35 Bolt M8X25 8 GB5783-86
36 Connector, HST 1 W2.0-05(R)-35
Oil Pipe, Oil Filter, Oil
37 Inlet Pump 1 W2.5M-05M-11-00
Oil Inlet Hose, Oil Filter,
38 HST 1 W2.5M-05M-12-00

- 215 -
Hydraulic Valve Assy W2.5E-05GW-00 (Cabin Type)

- 216 -
 Hydraulic Valve Assy W2.5E-05GW-00 (Cabin Type)

NO. Description QTY Part Code Note

39 Grain Unloading Hose 1 W2.5E-05GW-13-00
Connector,
40 Unloading Cylinder 1 W2.0B-05-44A
41 Unloading Cylinder 1 W2.5DD-05GX-02-00EA
42 Washer 21 1 JB982-77
43 Washer 20 1 JB1002-77
44 O Ring 14×2.65 1 GB3452.1-83
Oil Pipe, A, Header
45 Cylinder 1 W2.5M-05M-17-00
46 Solenoid Valve Assy 1 W2.5M-05M-02-00
47 Press Plate 1 W2.0B-05CD-06
48 Block 2 W2.0B-05CD-07
49 Bolt M8X65 1 GB5782-86
50 Gasket 8 4 GB97.1-85
Oil Distributing Pipe
51 Assy , Right, Reel 1 W2.5DD-05D-02-00A
Oil Distributing Pipe
52 Assy , Left, Reel 1 W2.5DD-05D-07-00A
53 Bolt, Hollow 1 W2.5D-05-02
54 Anti-loose Plate Assy 1 W2.5D-05-20-00
55 Washer 18 2 JB982-77
56 Connector 1 W2.5DD-05DB-33
Oil Returning Hose Assy ,
57 Solenoid Valve 1 W2.5M-05M-14-00
58 Header Cylinder 1 W2.5DD-05DB-30-00
59 Nut M8 1 GB6170-86
60 Washer 22 6 JB982-77
61 Bolt M22, Hollow 3 W2.5DD-05DC-13

- 217 -
XI Operation Part
(Canopy Type)

- 218 -
Operation Assy

- 219 -
 Operation Assy

NO. Description QTY Part Code Note

1 Operation Platform Assy 1 W3.5H-07X-01-00
2 Cover, Dust Proof, Engine 1 W3.5H-07X-06-00
3 Clutch Lever 1 W2.5DA-07E-05-00
4 Throttle 1 W2.5DA-07E-08-00
5 Main and Auxiliary Shift 1 W3.5H-07D-04-00
Main/Auxiliary Guide lever
6 Assy 1 W2.5DA-07-02-00
7 Side Mirror 1 W2.0-01-11-00
8 Brake Lock 1 W2.5-07D-03-00
9 Baffle Plate 1 W2.5DA-07E-11
10 Bolt M6×16 5 GB5783-2000
11 Washer 6 5 GB93-2000
12 Washer 6 5 GB96-2000
13 Nut M6 5 GB6170-2000

- 220 -
Operation Platform Assy

- 221 -
 Operation Platform Assy

NO. Description QTY Part Code Note

1 Bolt M8x20 19 GB/T5783-2000
2 Washer 8 29 GB/T93-87
3 Washer 8 11 GB/T97.1-2002
4 Operation Panel Weld 1 W2.5DA-07D-01-02-00
5 Hook 1 W2.5DA-07G-01-20
6 Plate 1 W2.5D-07G-01-18
7 Cover Assy, Outside 1 W2.5D-07G-01-05-00
8 Bolt M6x16 16 GB/T5783-2000
9 Washer 6 17 GB/T93-87
10 Washer 6 11 GB/T96-2002
11 Spring Plate 1 W2.5DA-07KC-01-14
12 Frame Weld, Speed Changing 1 W3.5H-07D-01-06-00
13 Armrest 1 W2.5D-07-01-08
Side Plate Weld, Operation
14 Platform 1 W2.5D-07-01-14-00
15 Panel 1 W2.5DA-07E-01-17
16 Frame Assy, Reflector 1 W2.5D-07-01-16-00
17 Plate Weld 1 W2.5D-07-01-11-00
18 Operation Box Weld, Main 1 W2.5DA-07K-01-09A-00
19 Pedal Assy 1 W2.5D-07-01-12
20 Washer 8 20 GB/T96-2002
21 Bolt M8X30 2 GB5783-86
22 Nut M8 14 GB6170-86
23 Buckle 1 W2.5D-07-01-19
24 Plate, Reinforced 1 W2.5DA-07G-01-23
26 Bolt M6x20 2 GB/T5783-2000
27 Washer 6 2 GB/T97.1-2002
28 Nut M6 6 GB6170-86
29 Bolt M8X25 6 GB/T5783-2000
30 Frame Assy, Support 1 W2.5D-07Y-01-01-00
31 Sealing on demand W2.0-02-47
32 Pipe on demand W2.5DA-07K-01-25
33 Retaining Ring 2 W2.0-02-17-03
34 Light Holder, Front 1 W2.0-07-01-21

- 222 -
Engine Shield Assy

- 223 -
 Engine Shield Assy

NO. Description QTY Part Code Note

1 Seat 1 W2.0-07-06-01-00A
2 Shield Assy, Water Tank 1 W2.5DA-07(B)-06-03-00
3 Rope, Steel 1 W2.5-07-06-05
4 Pin 4×22 2 GB91-88
5 Washer 12 2 GB97.1-85
6 Cooler, Oil 1 W2.5DD-05DC-20-00
7 Bolt M8×20 6 GB5783-86
8 Nut M8 4 GB6170-86
9 Washer 8 8 GB97.1-85
10 Washer 8 8 GB93-87
Connecting Plate, Seat,
11 Lower 1 W2.5-07-06-06
12 Block (Holder, Dust Proof) 1 W2.5-07-06-07-00
13 Bolt M8×25 2 GB6170-86
14 Fixing Clamp 3 W2.5-07-06-09-00A
15 Nut M6 6 GB6170-86
16 Washer 6 6 GB93-87
17 Seat Frame Assy 1 W2.5D-07CE-06-04-00

- 224 -
XII Operation Part
(Canopy, Auto Unloading Type)

- 225 -
Operation Assy

- 226 -
 Operation Assy

NO. Description QTY Part Code Note

1 Operation Platform Assy 1 W3.5H-07D-01-00
2 Cover, Dust Proof, Engine 1 W3.5H-07D-06-00
3 Clutch Lever 1 W2.5DA-07E-05-00
4 Throttle 1 W2.5DA-07E-08-00
5 Main and Auxiliary Shift 1 W3.5H-07D-04-00
Main/Auxiliary Guide
6 lever Assy 1 W2.5DA-07-02-00
7 Side Mirror 1 W2.0-01-11-00
8 Brake Lock 1 W2.5-07D-03-00
9 Baffle 1 W2.5DA-07E-11
10 Bolt M6×16 5 GB5783-2000
11 Washer 6 5 GB93-2000
12 Washer 6 5 GB96-2000
13 Nut M6 5 GB6170-2000

- 227 -
Operation Platform Assy

- 228 -
 Operation Platform Assy

NO. Description QTY Part Code Note

1 Bolt M8x20 19 GB/T5783-2000
2 Washer 8 29 GB/T93-87
3 Washer 8 11 GB/T97.1-2002
4 Operation Panel Weld 1 W2.5DA-07KC-01-02-00
5 Hook 1 W2.5DA-07G-01-20
6 Plate 1 W2.5D-07G-01-18
7 Cover Assy, Outside 1 W2.5D-07G-01-05-00
8 Bolt M6x16 16 GB/T5783-2000
9 Washer 6 17 GB/T93-87
10 Washer 6 11 GB/T96-2002
11 Spring Plate 1 W2.5DA-07KC-01-14
Frame Weld, Speed
12 Changing 1 W3.5H-07D-01-06-00
13 Armrest 1 W2.5D-07-01-08
Side Plate Weld, Operation
14 Platform 1 W2.5D-07-01-14-00
15 Panel 1 W2.5DA-07E-01-17
16 Frame Assy, Reflector 1 W2.5D-07-01-16-00
17 Plate Weld 1 W2.5D-07-01-11-00
18 Operation Box Weld, Main 1 W2.5DA-07K-01-09A-00
19 Pedal Assy 1 W2.5D-07-01-12-00
20 Washer 8 20 GB/T96-2002
21 Bolt M8X30 2 GB5783-86
22 Nut M8 14 GB6170-86
23 Buckle 1 W2.5D-07-01-19
24 Plate, Reinforced 1 W2.5DA-07G-01-23
26 Bolt M6x20 2 GB/T5783-2000
27 Washer 6 2 GB/T97.1-2002
28 Nut M6 6 GB6170-86
29 Bolt M8X25 6 GB/T5783-2000
30 Operation Panel Weld 1 W2.5DA-07KC-01-02C-00
31 Sealing on demand W2.0-02-47
32 Pipe on demand W2.5DA-07K-01-25
33 Washer 2 W2.0-02-17-03

- 229 -
Main/Auxiliary Shift Handle W3.5H-07D-04-00

- 230 -
 Main/Auxiliary Shift Handle W3.5H-07D-04-00

NO. Description QTY Part Code Note

1 Lever, Clutch 1 W2.5DA-07E-05-01
2 Lever, Auxiliary Shift 1 W2.5DA-07E-04-02-00
3 Frame 1 W2.5DA-07KC-04-03-00
4 Connecting Rod, HST 1 W1.8-07S-04-04
5 Washer, Plain 10 1 GB97.1-85
6 Fixing Shaft, Lower 2 W2.5DA-07E-04-06
7 Press Plate 1 W2.0-07-04A-23
Connecting Rod, Speed
8 Changing 1 W3.5H-07D-04-07-00
9 Lever, Speed Changing 1 W2.5DA-07E-04-08-00
10 Sleeve 4 W2.5DA-07E-04-10
11 Connecting Fork 1 W2.5D-07-04-09-00
12 Washer, Plain 2 W2.0-07-04A-24
13 Translation Frame Weld 1 W2.5DA-07KC-04-14-00
14 Translation Level 1 W2.5DA-07E-04-15-00
15 Bearing PHSA10 1 W2.5DA-07E-04-21L
16 Handle, Main Shift 1 W2.5DA-07E-04-19
17 Bolt M8×25 3 GB5783-86
18 Cushion 8 3 GB93-87
19 Washer, Plain 8 5 GB97.1-85
20 Spring 1 W2.0-07-04A-25
21 Nut M20×1.5 2 GB6173-86
22 Nut M10 4 GB6170-86
23 Nut M10(Left ) 1 GB6170-86
24 Pin Shaft B14×100 1 GB882-86
25 Washer, Plain 14 1 GB97.1-86
26 Pin 3.2×30 2 GB91-86
27 Bolt M10×35 1 GB5783-86
28 Cushion 10 3 GB93-87
29 Spring 1 W2.5DA-07KC-04-20
30 Washer 20 1 GB97.1-85
31 Holder 1 W2.5DA-07E-04-26
32 Bolt M6×18 2 GB5783-86
33 Washer 6 2 GB97.1-85
34 Washer 6 2 GB93-85
35 Washer 16 2 GB97.1-85
36 Washer, Plain 10 2 GB97.1-85
37 Bearing PHSA10 1 W2.5DA-07E-04-21R
38 Nut M6 2 GB/T5783
39 Nut M8 3 GB/T5783

- 231 -
Main/Auxiliary Shift Handle W3.5H-07D-04-00

- 232 -
 Main/Auxiliary Shift Handle W3.5H-07D-04-00

NO. Description QTY Part Code Note

40 Pin Shaft B8×26 2 GB/T882
41 Pin 2.5×25 2 GB/T91

- 233 -
Engine Shield Assy W3.5H-07D-06-00

- 234 -
 Engine Shield Assy W3.5H-07D-06-00

NO. Description QTY Part Code Note

1 Seat 1 W2.0-07-06-01-00A
2 Shield Assy, Water Tank 1 W2.5DA-07GC-06-03-00
3 Rope, Steel 1 W2.5-07-06-05
4 Pin 4×22 2 GB91-88
5 Washer 12 2 GB97.1-85
6 Cooler, Oil 1 W2.5DD-05DC-20-00
7 Bolt M8×20 6 GB5783-86
8 Nut M8 4 GB6170-86
9 Washer 8 8 GB97.1-85
10 Washer 8 8 GB93-87
Connecting Plate, Seat,
11 Lower 1 W2.5-07-06-06
12 Block(Holder, Dust Proof) 1 W2.5-07-06-07-00
13 Bolt M8×25 2 GB6170-86
14 Fixing Clamp 3 W2.5-07-06-09-00A
15 Nut M6 6 GB6170-86
16 Washer 6 6 GB93-87
17 Frame Assy, Seat 1 W2.5DA-07C-06-04-00
18 Washer, Plain 6 8 GB/T97.1

- 235 -
XIII. Handle Part
(Cabin Type )

- 236 -
Handle Assy (With Cabin) W3.5H-07F-00

- 237 -
 Handle Assy (With Cabin) W3.5H-07F-00

NO. Description QTY Part Code Note

1 Clutch Assy 1 W2.5E-07F-05-00
2 Main/Auxiliary Shift 1 W3.5H-07F-04-00
3 Main/Auxiliary Handle 1 W2.5E-07F-02-00
4 Brake Lock 1 W2.5E-07F-03-00
5 Cover Assy, Dust Proof 1 W3.5H-07F-06-00
6 Seat 1 W2.0-07-06-01-00D
7 Hand Throttle Assy 1 W2.5E-07F-08-00A
8 Stopping String 1 W2.5E-07F-09-00A

- 238 -
Dust Proof Cover AssyW3.5H-07F-06-00

- 239 -
 Dust Proof Cover AssyW3.5H-07F-06-00

NO. Description QTY Part Code Note

1 Cover Assy, Water Tank 1 W2.5E-07-06-03-00A
2 Plate Weld 1 W2.5E-07-06-04-00
3 Cooler, Oil 1 W2.5DD-05DC-20-00
4 Hinge 2 4LZ.2A.29.2.3
5 Bolt M6×16 8 GB5783-86
6 Washer 6 8 GB96-86
7 Washer 6 8 GB93-87
8 Sponge, Seal on demand W2.5E-07-06-06
9 Dust Proof Ring 2 W2.5DA-07-06-03-05
10 Sealing (upper) on demand W2.0-02-47
11 Fixing Clamp 2 W2.5-07-06-09-00A

- 240 -
Main/Auxiliary Shift W3.5H-07F-04-00

- 241 -
 Main/Auxiliary Shift W3.5H-07F-04-00

NO. Description QTY Part Code Note

1 Lever, Clutch 1 W2.5DA-07E-05-01
2 Lever, Auxiliary Shift 1 W2.5E-07F-04-02A-00
3 Frame 1 W2.5DA-07E-04-03-00
4 Connecting Rod, HST 1 W3.5H-07F-04-04
5 Washer, Plain 10 1 GB97.1-85
6 Fixing Shaft, Lower 2 W2.5DA-07E-04-06
7 Press plate 1 W2.0-07-04A-23
Connecting Rod, Speed
8 Changing 1 W3.5H-07F-04-07-00
9 Lever, Speed Changing 1 W2.5DA-07E-04-08-00
10 Sleeve 4 W2.5DA-07E-04-10
11 Connecting Fork 1 W2.5D-07-04-09-00
12 Washer, Plain 2 W2.0-07-04A-24
13 Translation Frame Weld 1 W2.5E-07F-04-14
14 Translation Level 1 W2.5E-07F-04-15A-00
15 Bearing PHSA10 1 W2.5DA-07E-04-21L
16 Handle, Main Shift 1 W2.5DA-07E-04-19
17 Bolt M8×25 3 GB5783-86
18 Cushion 8 3 GB93-87
19 Washer, Plain 8 3 GB97.1-85
20 Spring 1 W2.0-07-04A-25
21 Nut M20×1.5 2 GB6173-86
22 Pin Shaft B8×26 2 GB882-86
23 Washer, Plain 8 2 GB97.1-86
24 Pin 2.5×25 2 GB91-86
25 Nut M10 4 GB6170-86
26 Nut M10 (Left ) 1 GB6170-86
27 Pin Shaft B14×100 1 GB882-86
28 Washer, Plain 14 1 GB97.1-86
29 Pin 3.2×30 1 GB91-86
30 Bolt M10×35 1 GB5783-86
31 Cushion 10 3 GB93-87
32 Spring 1 W2.5E-07F-04-20
33 Washer 20 1 GB97.1-85
34 Holder 1 W2.5E-07F-04-26
35 Bolt M6×16 2 GB5783-86
36 Washer 6 2 GB97.1-85
37 Washer 6 2 GB93-85
38 Washer 16 2 GB97.1-85
39 Pin 3.2×30 1 GB91-86

- 242 -
Main/Auxiliary Shift W3.5H-07F-04-00

- 243 -
 Main/Auxiliary Shift W3.5H-07F-04-00

NO. Description QTY Part Code Note

40 Washer 10, Plain 2 GB97.1-85
41 Spring Plate 1 W2.5E-07F-04-27
42 Bearing PHSA10 1 W2.5DA-07E-04-21R

- 244 -
XIV. Canopy Part

- 245 -
Canopy Assy (Big Grain Tank, Canopy)

- 246 -
 Canopy Assy (Big Grain Tank, Canopy)

NO. Description QTY Part Code Note

1 Bolt B 2 W3.5H-13B-04
2 Washer 10 6 GB/T93-87
3 Nut M10 2 GB/T6170-86
4 Canopy 1 W2.0-13-03A
5 boltM8X50 4 GB/T818-2000
6 Washer 8 7 GB/T93-87
7 Washer 8 8 GB/T96-85
8 Nut M8 4 GB/T6170-86
9 Support Weld, Upper 1 W3.5H-13B-02-00
10 Support Weld, Lower 1 W3.5H-13B-01-00
11 Bolt A 2 W3.5H-13B-03
12 Pin Shaft B16X65 2 GB/T882-86
13 Pin 4X30 4 GB/T91-86
14 Washer 16 4 GB/T97.1-85
15 Bolt M8X25 3 GB/T5783-86
16 Washer 10 4 GB/T96-85
17 Retaining Ring for Shaft 3 W2.0-02-11-08
18 Bolt M10X25 2 GB/T5783-86
19 Washer 10 2 GB/T97.1-85
20 Pin Shaft B16X45 2 GB/T882-86

- 247 -
Canopy Assy (Small Grain Tank, Canopy)

- 248 -
 Canopy Assy (Small Grain Tank, Canopy)

NO. Description QTY Part Code Note

1 Bolt B 2 W3.5H-13B-04
2 Washer 10 2 GB/T97.1-85
3 Washer 10 9 GB/T93-87
4 Nut M10 2 GB/T6170-86
5 Canopy 1 W2.0-13-03A
6 Bolt M8X50 4 GB/T818-2000
7 Washer 8 4 GB/T93-87
8 Washer 8 8 GB/T96-85
9 Nut M8 4 GB/T6170-86
10 Support Weld, Upper 1 W3.5H-13A-02-00
11 Support Weld, Lower 1 W3.5H-13A-01-00
12 Pin Shaft B16X65 2 GB/T882-86
13 Pin 4X30 4 GB/T91-86
14 Washer 16 4 GB/T97.1-85
15 Bolt A 2 W3.5H-13B-03
16 Washer 10 4 GB/T96-85
17 Gasket, Big 3 W2.5-02-56-26
18 Bolt M10X25 5 GB/T5783-86
19 Pin Shaft B16X45 2 GB/T882-86

- 249 -
XV. Cabin Part

- 250 -
W3.5H-20-00 Cabin Assy (Air condition Cabin)

- 251 -
 W3.5H-20-00 Cabin Assy (Air condition Cabin)

NO. Description QTY Part Code Note

1 Cabin Weld 1 W2.5MT-20-01-00
2 Cover Plate 1 W2.5M-20-07
3 Glass Assy, Left Window 1 W2.5M-20-85-00
4 Hinge 3 W2.5-20K-04
5 Pin Shaft, Hinge 3 W2.5-20D-85
6 Bolt M10×25 6 GB5783-86
7 Washer 10 10 GB93-87
8 Washer 10 14 GB96-85
9 Glass, Left, Rear 1 W2.5M-20-32
10 Glass, Rearview 1 W2.5M-20-15
11 Glass, Right, Rear 1 W2.5M-20-22
12 Armrest Weld 1 WD.20MK-19-00
13 Washer 8 11 GB93-87
14 Nut M8 1 GB/T923-88
15 Supporting Rod 1 WD.20MK-30
16 Washer, Rubber 3 W2.5-20K-23
17 Washer, Rubber 3 W2.5-20K-24
18 Bolt 11 W2.5-20K-25
19 Glass, Front 1 W2.5M-20-17
20 Gasket 6 W2.5-20K-26
21 Washer, Rubber 8 W2.5-20K-27
22 Washer, Rubber 8 W2.5-20K-28
23 Nut, Window 8 W2.5-20K-29
24 Lock 1
25 Glass, Right Door 1 W2.5M-20-46
26 Bottom Plate 1 W2.5M-20-42
27 Cover Plate, Oil Filling 1 W2.5M-20-26
28 Cover Plate 1 W2.5MT-20-20
29 Roof Assy 1 W2.5-20K-73-00
30 Plate, Front 1 W2.5M-20-54-00
31 Connecting Hook 4 W2.5-20B-67
32 Reflector Assy 2 WD-ZS-9F624
33 Roof 1 W2.5M-20-52
34 Plate 1 W2.5M-20-55-00
35 Label 1 WDT.400C.47B.215
36 Bolt M10×100 2 GB5783-86
37 Nut M10 8 GB6170-86
38 Bolt Φ7 12
39 Air-conditioner Assy 1 W3.5H-20-70-00
40 Washer, Rubber 4 W2.5-20B-90

- 252 -
 W3.5H-20-00 Cabin Assy (Air condition Cabin)

W3.5H-20-00Cab Assy(Air condition Cab)

NO. Description QTY Part Code Note

41 Washer 4 WD.20ME-59
42 Nut M6 8 GB6170-86
43 Rain Wiper Assy 1 WD.20MF.56
44 Motor Cover 1 WD.20MF-80
45 Stopper 2 W2.5-20D-82
46 Cover, Rubber 9 W2.5-20D-84
Shock-absorbing Cushion
47 Assy 2 W2.5M-20-36-00
48 Plate, Left 1 W2.5M-20-45
49 Rope, Steel 1 W2.5M-20-48
50 Pedal 1 W2.5M-20-47
51 Retaining Ring 12 3 GB894-86
52 Operation Panel 1 W2.5M-20-62
Hairbrush, Main/ Auxiliary
53 Shift 1 W2.5M-20-74
54 Air Brake 1 W2.5M-20-50
55 Pin12×55 1 GB882-86(BType)
56 Pin, Spring 2 W2.5E-07F-04-04-03
- 253 -
 W3.5H-20-00Cab Assy(Air condition Cab)

NO. Description QTY Part Code Note

57 Washer 12 2 GB96-85
58 Washer 6 32 GB96-85
59 Bolt M6×18 33 GB/T818-2000
60 Washer 6 5 GB97.1-85
61 Hairbrush, Operation Box 1 W2.5-20B-77
62 Stopper, Left, Front 1 W2.5M-20-49
63 Pin 8×20 2 GB882-86(BType)
64 Pin 3.2×20 6 GB91-86
65 Washer 8 13 GB96-85
66 Rope, Steel 1 W2.5M-20-79
67 Pin12×40 4 GB882-86(BType)
68 Shock-absorbing Cushion 2 W2.5M-20-80
69 Washer 12 4 GB93-87
70 Nut M12 4 GB6170-86
71 Buckle 1 W2.5M-20-51
72 Sleeve 1 W2.0-07-02-06
73 Instrument Seat Weld 1 W2.5M-20-58-00
74 Nut M6 2 GB62-88
75 Washer 6 7 GB93-87
76 Washer 12 12 GB97.1-85
77 Bolt 12×35 4 GB5783-86
78 Washer, Rubber 8 W2.5M-20-57
79 Baffle 1 W2.5M-20-29
80 Bolt M10×30 2 GB5783-86
81 Washer, Rubber 1 W2.5MT-20-90
82 Stopping String 1 W2.5MT-20-89-00
83 Washer 2 W2.5M-20-92
84 Bolt M8×20 9 GB5783-86
85 Dust Proof Ring 1 W2.5M-20X-53

- 254 -
XVI. Lower Blade Part

- 255 -
Lower Blade Assy

- 256 -
 Lower Blade Assy

NO. Description QTY Part Code Note

1 Hub, Left Driving 1 W2.5E-01B-02-38X
Driving Chain Wheel,
2 Auxiliary Blade 1 W2.5E-10T-03D
3 Roller Chain 10A-136 1 GB/T1243.1-83
4 Plate Assy, Support 1 W2.5E-10T-06-00
5 Lever Assy 1 W2.5E-10T-13B-00
6 Blade Assy, Lower (2.0m) 1 W2.5E-10T-02C-00A
7 Limiter Assy 1 W2.5E-10T-05-00
8 Bolt M12×30 2 GB/T5783-86
9 Washer 12 2 GB/T 93-87
10 Washer 12 2 GB/T97.1-85
11 Nut M12 2 GB/T6170-86
12 Inhaul Cable Assy 1 W2.5E-10T-17A-00
13 Cover Weld 1 W2.5E-10T-15C-00
14 Blade Assy, Lower (2.2m) 1 W2.5E-10T-20C-00A
15 Plate 1 W2.5E-10T-16B
16 Bolt M8×35 6 GB/T5782-86
17 Washer 8 6 GB/T93-87
18 Screw Weld 1 W2.5E-10T-17A-01-00
19 Chain 1 W2.5E-10T-17A-03
20/21 Pin Shaft B12X40/32 1 GB/T882-86
22/25 Washer 12/Nut M12 2 GB/T97.1-85/6170-86
23 Pin 2 XSS46-06
24 Plate, Limiter 1 W2.5E-10T-17-02
26 Press Cover 1 W2.5E-10T-05-03
27 Spring, Limiter 1 W2.5E-10T-05-02
28 Plate Weld, Limiter 1 W2.5E-10T-05-01-00
29/30 Bolt M12×130/Nut M12 1/2 GB/T5782-86/6170-86
31 Lever B 1 W2.5E-10T-13-06
32 Nut M16 (Left ) 1 GB/T6170-86
33 Sleeve, Nut 1 W2.5E-10T-13-05
34 Nut M16 1 GB/T6170-86
35 Adjusting Arm Weld 1 W2.5E-10T-13B-01-00
36 Revolving Seat Weld 1 W2.5E-10T-13-02-00
37 Pin Shaft B12×65 1 GB/T882-86
38 Washer 12 1 GB/T97.1-85
39 Pin 4×30 1 GB/T91-86
40 Tension Spring 1 W2.5E-10T-13-04
41 Pin 2×40 1 GB/T4329-2001
42 Pin Shaft B10×26 1 GB/T882-86
44 Pin 3.2×30 1 GB/T91-86
- 257 -
Support Plate Assy

- 258 -
 Support Plate Assy

NO. Description QTY Part Code Note

1 Bolt M10×30 1 GB/T5783-86
2 Washer 10 3 GB/T97.1-85
3 Washer 10 2 GB/T93-87
4 Supporting Plate Weld 1 W2.5E-10T-06-01-00
5 Bolt M10×90 1 GB/T5783-86
6 Nut M10 1 GB/T6170-86
7 Sleeve 1 W2.5E-10T-06-03
8 Tension Chain Wheel 10A-14 2 L1.8A-03-28-02
9 Retaining Ring for Bore 40 2 GB/T893.1-86
10 Bearing 6203-2RS 2 GB/T276-94
11 Shaft, Short 1 W2.5E-10T-06-02
12 Washer 12 2 GB/T97.1-85
13 Washer 12 2 GB/T93-87
14 Nut M12 2 GB/T6170-86

- 259 -
Lower Blade Assy

- 260 -
 Lower Blade Assy

NO. Description QTY Part Code Note

1 Blade Assy 1 W2.5E-10T-02C-02-00 2.0m
Blade Assy 1 W2.5E-10T-20C-02-00 2.2m
2 Lower Blade Weld 1 W2.5E-10T-02C-01A-00 2.0m
Lower Blade Weld 1 W2.5E-10T-20C-01A-00 2.2m
3 Bolt M12×90 8 GB/T5782-86
4 GB/T96-85 12 Washer 12
5 GB/T93-87 14 Washer 12
6 Nut M12 12 GB/T6170-86
7 Support Arm Weld, Right 1 W2.5E-10T-02C-09-00
8 Washer 2 W2.5E-10T-02A-21
9 Oil Cup M8×1 3 GB/T1152-89
10 Bolt M12×25 2 GB/T5783-86
11 Connecting Seat Weld, Right 1 W2.5E-10T-02A-06-00
12 Bolt M12×100 2 GB/T5782-86
13 Supporting Arm Assy, Middle 1 W2.5E-10T-02C-10A-00
14 Connecting Seat Weld 1 W2.5E-10T-02A-13-00
15 Bolt M12×70 2 GB/T5782-86
16 Shaft Sleeve 1 W2.5E-10T-02A-22
17 Pin Shaft 1 W2.5E-10T-02B-23
18 Retaining Ring 1 WD.6M.2-02
19 Revolving Sleeve Weld, A 1 W2.5E-10T-02C-08-00
20 Washer 12 12 GB/T97.1-85
21 Eccentric Chain Wheel Assy 1 W2.5E-10T-02-05-00
22 Bearing 6205-RS 2 GB/T276-94
23 Sleeve 1 L18A.10.3-02
24 Retaining Ring for Bore 52 3 GB/T893.1-86
25 Pin 3.2×28 2 GB/T91-86
26 Nut M12 2 GB/T6181-86
27 Retaining Ring 1 L18A.10-01
28 Bearing 1205 1 W2.0-01-01-07-12
29 Cover, Dust Proof 1 W2.0-01-01-07-07
30 Oil Cup M6 1 GB/T1152-89
31 Circlip for Shaft 25 1 GB/T894.2-86
32 Connecting Rod Weld 1 W2.5E-10T-02C-04-00
33 Press Plate 2 L1.8A-01-11-22
34 Sleeve 1 W.1.5B-08
35 Throat Hoop C30~40 1 JB/T8870-1999
36 Bearing 1 W2.0-01-01-07-05-00

- 261 -
Lower Blade Assy

- 262 -
 Lower Blade Assy

NO. Description QTY Part Code Note

37 Press Plate (II) 1 W2.0-01-01-07-04
38 Bolt M10×40 4 GB/T5783-86
39 Washer 10 4 GB/T93-87
40 Triangle Swing Arm 1 W2.5E-10T-02C-03-00
41 Stiffened Plate 1 W2.5E-10T-02C-28-00
42 Bolt M12X70 1 GB/T5783-86

- 263 -
Upper Blade Assy (2 m)

- 264 -
 Upper Blade Assy (2 m)

NO. Description QTY Part Code Note

1 Blade Beam 1 W2.5E-10T-02C-02-03
2 Convey Rack, Right 1 W2.5E-10T-02B-02-04
3 Blade Guide B 10 W2.0-01-01-03G-04
4 Blade Bar Weld 1 W2.5E-10T-02C-02-01-00
5 Bolt M8×18 8 GB/T5783-86
6 Washer 8 8 GB/T97.1-85
7 Washer 8 8 GB/T93-87
8 Nut M8 8 GB/T6170-86
9 Convey Rack, Right, B 1 W2.5E-10T-02B-02-09
10 Convey Rack, Middle 1 W2.5E-10T-02B-02-05
11 Convey Rack, Left 1 W2.5E-10T-02B-02-06
12 Blade Guide A 2 W2.0-01-01-03G-01
13 Bolt M10×30 14 GB/T12-88
14 Washer 10 29 GB/T93-87
15 Nut M10 24 24GB/T6170-86
16 Blade Pressed 3 W2.0-01-01-03G-10
17 Friction Plate 5 W2.0-01-01-03G-08
18 Bolt M10×40 6 GB/T12-88
19 Bolt M10×50 2 GB/T12-88
20 Press Plate 1 W2.0-01-01-03G-09
21 Plate 2 W2.0-01-01-03-05
22 Washer, Adjusting on demand W2.0-01-01-03G-07
23 Bolt M10×35 2 GB/T12-88
24 Bolt M10×25 5 GB/T5783-86
25 Washer 10 5 GB/T97.1-85

- 265 -
Blade Assy (2.2 m)

- 266 -
 Blade Assy (2.2 m)

NO. Description QTY Part Code Note

1 Blade Beam 1 W2.5E-10T-20C-02-03
2 Convey Rack, Right 1 W2.5E-10T-02B-02-04
3 Blade Guide, B 11 W2.0-01-01-03G-04
4 Blade Bar Weld 1 W2.5E-10T-20C-02-01-00
5 Bolt M8×18 8 GB/T5783-86
6 Washer 8 8 GB/T97.1-85
7 Washer 8 8 GB/T93-87
8 Nut M8 8 GB/T6170-86
9 Convey Rack, Right, B 1 W2.5E-10T-02B-02-09
10 Convey Rack, Middle 1 W2.5E-10T-02B-02-05
11 Convey Rack, Left 1 W2.5E-10T-02B-02-06
12 Blade Guide A 2 W2.0-01-01-03G-01
13 Bolt M10×30 16 GB/T12-88
14 Washer 10 29 GB/T93-87
15 Nut M10 24 24GB/T6170-86
16 Press Plate 3 W2.0-01-01-03G-10
17 Friction Plate 5 W2.0-01-01-03G-08
18 Bolt M10×40 6 GB/T12-88
19 Bolt M10×50 2 GB/T12-88
20 Press Plate 1 W2.0-01-01-03G-09
21 Plate 2 W2.0-01-01-03-05
22 Washer, Adjusting on demand W2.0-01-01-03G-07
23 Bolt M10×35 2 GB/T12-88
24 Bolt M10×25 5 GB/T5783-86
25 Washer 10 5 GB/T97.1-85

- 267 -
Triangle Swing Arm Assy

- 268 -
 Triangle Swing Arm Assy

NO. Description QTY Part Code Note

1 Triangle Swing Arm Weld 1 W2.5E-10T-02C-03-01-00
2 Shaft 1 W2.0-01-01-07-01-03
3 Washer 12 2 GB/T97.1-85
4 Washer 12 2 GB/T93-87
5 Nut 12 2 GB/T6170-86
6 Pin Shaft 1 W2.0-01-01-07-01-09
7 Bearing 6203-2RS 2 W2.0-01-01-07-01-10
8 Cover, Mud Proof 1 W2.0-01-01-07-01-08
9 Circlip for Shaft 17 1 GB/T894.2-86
10 Cover, Dust Proof 1 W2.0-01-01-07-01-04
11 Circlip for Bore 47 2 GB/T893.1-86
12 Swing Rod, Shaft 1 W2.5E-10T-02A-03-02
13 Circlip for Shaft 20 1 GB/T894.2-86
14 Nylon Sleeve 1 W2.5E-10T-02-03-03
15 Bearing 6204-RS 2 GB/T276-94

- 269 -
XVII. Grain Tank Part

- 270 -
Grain Tank Assy (W3.5H-04BX-00, W3.5H-04GX-00)

- 271 -
 Grain Tank Assy (W3.5H-04BX-00, W3.5H-04GX-00)

NO. Description QTY Part Code Note

1 Grain Tank Weld 1 W3.5H-04BX-01-00 Canopy
Grain Tank Weld 1 W3.5H-04GX-01-00 Cabin
2 Filtering Cover 1 W2.5-04-02-03-07
3 Rivet φ3.2×9 6 GB/T12618-1990
4 Unloading Operation Assy 1 W3.5H-04BX-03-00 Canopy
5 Lever Assy 1 W2.5B-04CY-06-00B Canopy
Lever Assy 1 W2.5E-04GD-06B-00 Cabin
6 Auger Assy, Vertical Lifting 1 W3.5H-04BX-02-00
7 Frame Assy, Front 1 W3.5H-04BX-07-00 Canopy
8 Frame Assy, Front 1 W2.5B-04CY-07-00P Canopy
9 Lever Weld, Belt 1 W5.0-04Q-02A-00
10 Frame Assy, Tension Pulley 1 W2.5B-04CM-02-00
11 Frame Assy, Cover 1 W2.5B-04BX-08D-00
12 Transmission Box Assy 1 W2.5B-04CY-10B-00
13 Bolt M16X40 1 GB/T5783-86
14 Washer 16 1 GB/T93-87
15 Nut M16 1 GB/T6170-86
16 Washer 16 2 GB/T97.1-85
17 Nut M10 2 GB/T6170-86
18 Cover Assy, Grain Guide 1 W2.5B-04BX-05-00
19 Auger Assy, Grain Unloading 1 W2.5B-04BX-11D-00
20 Box Assy, Upper 1 W2.5B-04BX-03-00
21 Auger Assy, Grain Unloading 1 W2.5B-04BX-04D-00 Optional
22 Cover Assy 1 W2.5B-04BX-18D-00 Canopy
Cover Assy 1 W2.5E-04GX-03D-00 Cabin
23 Seal Plate 1 W3.5H-04BX-04
24 Bolt M6×16 1 GB/T5783-86
25 Washer 6 9 GB/T96-85
26 Washer 6 9 GB/T93-87
27 Fixing Seat Assy 1 W2.5B-04-34-00
28 Plate, Grain Unloading 1 W2.5B-04-27
29 Cover Assy, Upper 1 W2.5B-04CY-13-00 Canopy
Cover Assy, Upper 1 W2.5B-04BY-13-00 Cabin
30 Cover Assy, Right 1 W2.5B-04BX-14D-00 Canopy
Cover Weld, Right 1 W2.5E-04GX-08D-00 Cabin
31 Frame Assy, Limiter, Belt 1 W5.0-04Q-07-00 Changchai engine
32 Frame Assy, Limiter, Belt 1 W5.0-04Q-07Q-00 Changchai engine

- 272 -
Grain tank Assy (W3.5H-04BX-00, W3.5H-04GX-00)

- 273 -
 Grain Tank Assy(W3.5H-04BX-00, W3.5H-04GX-00)

NO. Description QTY Part Code Note

33 Frame Assy, Limiter, Belt 1 W2.5B-04BX-19(Y)-00D
34 Frame Assy, Limiter, Belt 1 W2.5B-04BX-19(YG)-00D
35 Frame Assy, Limiter, Belt 1 W5.0-04Q-07YC-00
36 C Belt 1850 1 W2.5B-04-32
37 Frame Assy, Rear 1 W3.5H-04BX-09-00
38 Driving Assy, Horizontal 1 W2.5B-04BX-12-00B
39 Frame Assy, Turn Signal 1 W2.5B-04-35-00
40 Hoop Assy, Upper 1 W2.5B-04BX-06-00
41 Pin Shaft B20X70 1 GB/T82-86
42 Pin 5X40 1 GB/T91-86
43 Bolt M8×20 1 GB/T5783-86
44 Retaining Ring 1 W2.5B-04BX-15
45 Washer 8 1 GB/T93-87
46 Auger Assy, Grain Unloading 1 W2.5B-04BX-04D-00B
47 Bolt M10X35 2 GB/T5783-86
48 Washer 10 2 GB/T93-87
49 Frame Assy 1 W3.5H-04GX-06-00 Canopy
Frame Assy 1 W3.5H-04GX-07-00 Cabin
50 Cover Assy, B 1 W2.5B-04BX-16-00
51 Cover Assy, A 1 W2.5B-04BX-17-00
52 Frame Assy, Limiter, Belt 1 W2.5B-04-19X-00
53 Washer 20 1 GB/T97.1-85
54 Bolt M6×20 8 W3.5H-04BX-05-00
55 Seat Assy, String 1 W2.5E-04GX-07-00 Cabin
56 Nut 1 W2.0-01-02-07-00 Cabin
57 Washer, Big 8 1 GB/T96-85 Cabin
58 Washer 8 1 GB/T93-87 Cabin

- 274 -
Grain Unloading Lifting Auger Assy (W3.5H-04BX-02-00)

- 275 -
 Grain Unloading Lifting Auger Assy (W3.5H-04BX-02-00)

Description QTY Part Code Note

1 Bolt M8X35 7 GB/T5783-86
2 Washer 8 8 GB/T93-87
3 Nut M8 7 GB/T6170-86
4 Bolt M8X25 1 GB/T5783-86
5 Housing Weld, Lifting Auger 1 W3.5H-04BX-02-02-00
6 Auger Weld, Vertical Lifting 1 W3.5H-04BX-02-01-00
7 Hoop Weld, Inner 1 W2.5B-04BX-06-01-00
8 Bolt M10X30 4 GB/T5783-86
9 Washer 10 8 GB/T93-87
10 Washer, Plain 4 WD-150.01.26-01
11 Hoop, Outside 1 W2.5B-04BX-06-02
12 Oil Cup M6 1 GB/T1152-89

- 276 -
 Unloading Handle Assy (W3.5H-04BX-03-00)

NO. Description QTY Part Code Note

Handle Rod Assy, Grain
1 Unloading 1 W2.5B-04CY-12B-01-00
2 Connecting Rod, Lower 1 W3.5H-04BX-03-01
3 Clutch Lever 1 W2.5DA-07E-05-01
4 Washer 16 1 GB/T97.1-85
5 Washer 8 1 GB/T97.1-85
6 Pin φ2.5x26 2 GB/T91-86
7 Spring, Grain Unloading 1 W2.5B-04CY-12B-03
8 Nut M8 3 GB/T6170-86
9 Washer 8 3 GB/T96-85
10 Washer 8 4 GB/T93-87
11 Tension Seat Weld 1 W2.5B-04CM-02-01-00A
12 Tension Arm Assy 1 W2.5B-04CM-02-02-00A
13 Bolt M8X20 1 GB/T5783-86
14 Retaining Ring 1 W2.5B-04CM-02-04
15 Washer, Adjusting on demand W2.5B-04CM-02-03

- 277 -
 Front Frame Assy (W3.5H-04BX-07-00)

NO. Description QTY Part Code Note

1 Bolt M10X25 2 GB/T5783-86
2 Washer, Plain 2 WD-150.01.26-01
3 Washer 10 2 GB/T93-87
4 Frame Assy, Front 1 W3.5H-04BX-07-01-00
5 Bolt M12X30 1 GB/T5783-86
6 Washer 12 1 GB/T96-85
7 Washer 12 1 GB/T93-87

- 278 -
 Rear Frame Assy (W3.5H-04BX-09-00)

NO. Description QTY Part Code Note

1 Hoop 1 W2.5B-04BX-09-02
2 Oil Hose Clamp 1 W2.5B-04BX-03-05
3 Bolt M10X30 8 GB/T5783-86
4 Washer 10 11 GB/T96-85
5 Washer 10 17 GB/T93-87
6 Nut M10 11 GB/T6170-86
7 Frame Assy, Rear 1 W3.5H-04BX-09-01-00
8 Washer, Plain 2 WD-150.01.26-01
9 Washer, Adjusting on demand W2.5B-04-03-03
10 Bolt M10X25 4 GB/T5783-86
11 Washer 10 4 GB/T97.1-85
12 Bolt M10X35 1 GB/T5783-86

- 279 -
Support Assy (W3.5H-04GX-06-00)

- 280 -
 Support Assy (W3.5H-04GX-06-00)

NO. Description QTY Part Code Note

1 Rubber 1 W2.5B-04BX-07-05
2 Support Weld 1 W3.5H-04GX-06-01-00
3 Bolt M10X55 1 GB/T5782-86
4 Washer 10 2 GB/T93-87
5 Washer 10 3 GB/T96-85
6 Nut M10 2 GB/T6170-86
7 Bolt M10X85 1 GB/T5782-86
8 Washer 10 1 GB/T97.1-85
9 Bolt 7 9

- 281 -
 Lever Assy (W2.5B-04CY-06-00B)

NO. Description QTY Part Code Note

1 Lever 1 W2.5B-04CY-06-02
2 Pin 2×22 2 GB/T91-86
3 Washer 8 2 GB/T97.1-85
4 Handle Weld 1 W2.5B-04CY-06-01-00
5 Plate Assy 1 W2.0B-04E-06-02-00
6 Washer 10 4 GB/T93-87
7 Washer, Big 10 4 GB/T96-85
8 Bolt M10×25 4 GB/T5783-86
9 Tension Spring 1 W2.5B-04-06-05
10 Nut M6 1 GB/T6170-86
11 Washer 6 1 GB/T93-87
12 Bolt M6×16 1 GB/T5783-86
13 Pin 3.2×24 1 GB/T91-86
14 Washer 10 1 GB/T97.1-85

- 282 -
 Cover Frame Assy (W2.5B-04BX-08D-00)

NO. Description QTY Part Code Note

1 Cover Frame Assy 1 W2.5B-04BX-08D-01-00
2 Bolt M8×20 4 GB/T5783-86
3 Washer 8 4 GB/T93-87
4 Washer 8 4 GB/T97.1-85

- 283 -
Transmission Box Assy (W2.5B-04CY-10B-00)

- 284 -
 Transmission Box Assy (W2.5B-04CY-10B-00)

NO. Description QTY Part Code Note

1 Bearing Seat 1 W2.5B-04-10-04
2 Transmission Box 1 W2.5B-04CY-10-01
3 Circlip for Shaft 24 1 GB/T894.2-86
4 Washer 8 12 GB/T93-87
5 Key A8X50 1 GB/T1096-79
6 Belt Pulley Weld 1 W2.5B-04-10-09-00
7 Bolt M8X16 1 GB/5783-86
8 Nut M8 1 GB/6170-86
9 Bolt M8X25 6 GB/T5783-86
10 Bearing Seat 1 W2.5B-04-10-03
11 Bearing 6205-RS 2 GB/T276-94
12 Retaining Ring for Bore 52 2 GB/T893.1-86
13 Bevel Gear 1 W2.5B-04-10-06
14 Bearing 6006-2RS 1 GB/T276-94
15 Retaining Ring for Bore 55 2 GB/T893.1-86
16 Bearing 6006-RS 1 GB/T276-94
17 Bevel Gear 1 W2.5B-04-10-02
18 Cover 1 W2.5B-04-10-07
19 Washer, Adjusting B on demand W2.0B-04E-15-06
20 Washer, Adjusting on demand W2.5B-04-10-08
21 Key 8X25 1 GB/T1096-79
22 Gear Shaft 1 W2.5B-04CY-10B-05
23 Seal Plate 1 W2.5B-04-10-11
24 Washer, AdjustingⅡ on demand W2.5B-04-10-10

- 285 -
Cover Assy

- 286 -
 Grain Vibrator Assy

NO. Description QTY Part Code Note

1 Washer 8 4 GB/T97.1-85
2 Washer 8 14 GB/T93-87
3 Nut M8 10 GB/T6170-86
4 Baffle Weld 2 W2.5B-04CD-05-05-00
5 Nylon Sleeve 2 W2.5B-04CD-05-03
6 Cover Weld 1 W2.5B-04BX-05-01-00
7 Swing Rod Weld 1 W2.5B-04BX-05-02-00
Swing Rod Weld 1 W2.5B-04BX-05D(B)-02-00 Canopy Only
8 Retaining Ring 1 W2.5B-04CD-05-07
9 Bolt M8×20 1 GB/T5783-86
10 Eccentric Key Sleeve 1 W2.5B-04CD-05-02
Eccentric Key Sleeve 1 W2.5B-04HX-21B-03 Canopy Only
11 Circlip for Shaft 35 1 GB/T894-86
12 Bearing 6007-2RS 1 GB/T276-94
13 Washer 8 9 GB/T96-85

14 Washer, Adjusting 1 W2.5B-04BX-05-03

15 Washer, Adjusting 1 W2.5B-04CD-05-06

16 Nut 3 W2.0-01-02-07-00
17 Cover Assy 1 W2.5B-04BX-18D-01-00 Canopy Only
Cover Assy 1 W2.5E-04GX-03D-01-00 Cabin Only
18 Nut M8 6 GB/T62-88 Canopy Only

- 287 -
360°Auger Assy (W2.5B-04BX-11D-00)

- 288 -
 360°Auger Assy (W2.5B-04BX-11D-00)

NO. Description QTY Part Code Note

1 Lifting Housing 1 W2.5B-04BX-11D-01-01
Auger Weld, Grain
2 Unloading 1 W2.5B-04BX-11-02-00
3 Seal Cover Weld 1 W2.5B-04BX-11-03-00
4 Seal Cover Weld 1 W2.5B-04BX-11-04-00
5 Washer 6 6 GB/T96-85
6 Washer 6 6 GB/T93-87
7 Bolt M6X12 6 GB/T5783-86
8 Stopper 1 W2.5B-04BX-11-05
9 Nut M10 3 GB/T6170-86
10 Washer 10 6 GB/T93-87
11 Bolt M10X35 4 GB/T5783-86
12 Washer, Adjusting on demand W2.5B-04BX-11-01-02
13 Bearing 6008-RS 2 GB/T276-94
14 Bevel Gear 2 W2.5B-04BX-11-01-03
15 Circlip for Bore 68 2 GB/T893.2-86
16 Seal Cover 1 W2.5B-04BX-11-01-05
17 Washer, Adjusting on demand W2.5B-04BX-11-01-06

- 289 -
Grain Unloading Upper Housing Assy (W2.5B-04BX-03-00)

- 290 -
 Grain Unloading Upper Housing Assy (W2.5B-04BX-03-00)

NO. Description QTY Part Code Note

1 Housing B, Upper 1 W2.5B-04BX-03-01-01
2 Auger Weld, Middle, Short 1 W2.5B-04BX-03-03-00
3 Plate 2 W2.5B-04BX-03-04
4 Oil Hose Clamp 1 W2.5B-04BX-03-05
5 Bolt M8X30 4 GB/T5783-86
6 Washer 8 3 GB/T96-85
7 Washer 8 6 GB/T93-87
8 O Ring 315X5.3-G-N 1 GB/T3452.1-2005
9 Housing A, Upper 1 W2.5B-04BX-03-02-01
10 Washer, Adjusting 4 W2.5B-04BX-11-01-02
11 Bearing 6008-RS 4 W2.5B-04BX-11-01-07
12 Bevel Gear 4 W2.5B-04BX-11-01-03
13 Circlip for Bore 68 4 GB/T893.2-86
14 Oil Cup M6 2 GB/T1152-89
15 Bolt M12X25 2 GB/T5783-86
16 Washer 12 2 GB/T97.1-85
17 Washer 12 2 GB/T93-87
18 Washer, Plain 1 01.03C-02
19 Bolt M8X16 2 GB/T5783-86
20 Washer 8 2 GB/T96-85
21 Seal Plate Weld 1 W2.5B-04BX-03-02-02-00
22 Oil Cup M8X1 1 GB/T1152-89
23 Washer 1 W2.5B-04BX-03-06
24 Washer 4 W2.5B-04BX-11-01-06

- 291 -
Grain Tank Cover Assy (W2.5B-04CY-13-00, W2.5B-04BY-13-00)

- 292 -
 Grain Tank Cover Assy (W2.5B-04CY-13-00, W2.5B-04BY-13-00)

NO. Description QTY Part Code Note

1 Filter Cover 1 W2.5-04-02-03-07
2 Safety Net Weld 1 W2.5B-04CY-13-03-00
3 Rivet φ3.2×9 6 GB/T12618-1990
4 Bolt M6×12 2 GB/T5783-86
5 Spring Plate 1 W2.5B-04CY-13-04
6 Washer, Big 6 8 GB/T96-85
7 Washer 6 16 GB/T93-87
8 Bolt M6×16 8 GB/T5783-86
9 Handle 1 W2.5B-04CY-13-07
10 Cover Weld, Upper 1 W2.5B-04CY-13-01-00 Canopy Only
Cover Weld, Upper 1 W2.5B-04BY-13-01-00 Cabin Only
11 Sealing Plate on demand W2.5B-04CY-13-06 Canopy Only
Sealing Plate on demand WD.2ZA.21-03 Cabin Only
12 Lock Plate 1 W2.5B-04CY-13-05
13 Washer 6 8 GB/T97.1-85
14 Nut M6 8 GB/T6170-86
15 Cover Weld, Grain Tank 1 W2.5B-04CY-13-02-00
16 Nut M4 4 GB/T6170-86
17 Bolt M4×12 4 GB/T5783-86
18 Washer 4 4 GB/T93-87
19 Washer 6 4 GB/T97.1-85
20 Bolt M6×20 4 GB/T5783-86

- 293 -
Grain Unloading Auger Assy (W2.5B-04BX-04D-00, W2.5B-04BX-04D-00B)

- 294 -
Grain Unloading Auger Assy (W2.5B-04BX-04D-00, W2.5B-04BX-04D-00B)

NO. Description QTY Part Code Note

1 Auger A, Grain Unloading 1 W2.5B-04BX-04-01-00
2 Bolt M10×40 5 GB/T5783-86
3 Washer 10 10 GB/T93-87
4 Nut M10 10 GB/T6170-86
5 Washer 10 15 GB/T97.1
Housing Weld A, Grain
6 Unloading Auger 1 W2.5B-04BX-04D-03-00
7 Support Shaft 1 W2.5B-04BX-04D-10
8 Bearing 6304-2RS 1 W2.5-02-02-10-16
9 Retaining Ring for Bore 52 1 GB/T893.2-86
10 Bolt M10×35 5 GB/T5783-86
11 Auger B, Grain Unloading 1 W2.5B-04BX-04-02-00
Auger B, Grain Unloading 1 W2.5B-04BX-04B-02-00 (Unloading Auger 200)
Housing Weld, Grain
12 Unloading Auger B 1 W2.5B-04BX-04-04-00
Housing Weld, Grain
Unloading Auger B 1 W2.5B-04BX-04B-04-00 (Unloading Auger 200)
13 Bearing 6204-RS 1 GB/T276-82
14 Cover, Bearing Seat 1 W2.0-02-10-01-04
15 Bolt M12×25 1 GB/T5783
16 Washer 6 11 GB/T93-87
17 Oil Cup M6 1 GB/T1152-89
18 Baffle Assy 1 W2.5B-04BX-04-07-00
19 Bolt M6×16 11 GB/T5783-86
20 Washer 6 8 GB/T97.1-85
21 Nut M6 8 GB/T6170-86
22 Fixing Plate 2 W2.5B-04BX-04-06
23 Rivet φ4×12 3 GB/T12618-1990
24 Washer 8 W2.5B-04B-09-04
25 Washer 12 1 GB/T93
26 Washer 1 WD.1F.12
27 Sleeve 1 W2.5B-04BX-04B-05

- 295 -
Grain Unloading Horizontal Driving Assy (W2.5B-04BX-12-00B)

- 296 -
 Grain Unloading Horizontal Driving Assy (W2.5B-04BX-12-00B)

NO. Description QTY Part Code Note

1 Washer 8 8 GB/T93-87
2 Nut M8 10 GB/T6170-86
3 Bolt M8X25 2 GB/T5783-86
4 Bolt M8X35 2 GB/T5783-86
5 Washer 8 6 GB/T96-85
6 Installation Seat Weld 1 W2.5B-04BX-12-01-00
7 Bolt M10X35 4 GB/T5783-86
8 Washer 8 W2.5B-04BX-12-08
9 Washer 10 8 GB/T93-87
10 Nut M10 4 GB/T6170-86
11 Transition Plate 1 W2.5B-04BX-12-02
12 Retaining Ring 1 W2.5B-04BX-12-05
13 Bolt M6X20 1 GB/T5783-86
14 Washer 6 1 GB/T93-87
15 Active Gear 1 W2.5B-04BX-12-06
16 Motor Module Assy 1 W2.5B-04BX-12-03B-00
17 Oil Cup M6 1 GB/T1152-89
18 Lever Weld 2 W2.5B-04BX-12-04-00
19 Washer, Adjusting on demand W2.5B-04BX-12-09
20 Key C6X25 1 GB/T1096-79
21 Bolt M8X30 2 GB/T5783-86
22 Motor 1 W2.5B-04BX-12-03B-01
23 Washer, Adjusting 1 W2.5B-04BX-12-10

- 297 -
 Cover Assy A (W2.5B-04BX-17-00)

NO. Description QTY Part Code Note

1 Bolt M6X18 2 GB/T5783-86
2 Washer 6 2 GB/T96-85
3 Washer 6 2 GB/T93-87
4 Cover Weld A 1 W2.5B-04BX-17-01-00

- 298 -
 Cover Assy B (W2.5B-04BX-16-00)

NO. Description QTY Part Code Note

1 Cover Weld B 1 W2.5B-04BX-16-01-00
2 Nylon Clamp 2 W2.5B-04BX-12-07
3 Bolt M8×20 1 GB/T5783-86
4 Washer 6 1 GB/T93-87
5 Washer, Big 6 1 GB/T96-85
6 Bolt M8×50 1 GB/T5782-86
7 Washer 8 1 GB/T97.1-85
8 Washer 8 2 GB/T93-87
9 Bolt M6×16 1 GB/T5783-86
10 Washer, Big 8 1 GB/T96-85

- 299 -
 Fixing Seat Assy (W2.5B-04-34-00)

NO. Description QTY Part Code Note

1 Fixing Plate 1 W2.5B-04-34-01
2 Bolt M6×16 2 GB/T5783-86
3 Washer 6 2 GB/T93-87
4 Washer 6 2 GB/T97.1-85
5 Nut M6 2 GB/T6170-86

- 300 -
 Connecting Plate Assy (W2.5E-04GX-07-00)

NO. Description QTY Part Code Note

1 String Seat Weld 1 W2.5E-04GX-07-01-00
2 Washer 10 2 GB/T93-87
3 Washer 10 2 GB/T97.1-85
4 Bolt M10×25 2 GB/T5783-86

- 301 -
 Right Cover (W2.5B-04BX-14D-00, W2.5E-04GX-08D-00)

NO. Description QTY Part Code Note

1 Cover Assy, Right 1 W2.5B-04BX-14D-01-00 Canopy Only
Cover Assy, Right 1 W2.5E-04GX-08D-00 Cabin Only
2 Nut 1 W2.0-01-02-07-00
3 Washer, Big 8 1 GB/T96-85
4 Washer 8 1 GB/T93-87

- 302 -
 Limit Belt Holder Assy (W5.0-04Q-07-00)

NO. Description QTY Part Code Note

1 Limit Belt Holder Weld 1 W5.0-04Q-07-01-00
2 Frame Assy, Lower 1 W2.5B-04-19-02-00
3 Bolt M8X25 1 GB/T5783-86
4 Washer 8 2 GB/T93-87
5 Washer 8 2 GB/T97.1-85
6 Nut M8 2 GB/T6170-86
7 Nut M10 2 GB/6170-86
8 Steel Bar, Pressing Belt 1 W2.0A-04-20-03
9 Plate Assy 1 W5.0-04Q-07-02-00
10 Washer 10 2 GB/T97.1-85
11 Washer 10 2 GB/T93-87
12 Bolt M8X35 2 GB/T5783-86
13 Bolt M8X30 1 GB/T5783-86

- 303 -
 Limit Belt Holder Assy (W5.0-04Q-07Q-00)

NO. Description QTY Part Code Note

1 Limit Belt Holder Weld 1 W5.0-04Q-07Q-01-00
2 Frame Assy, Lower 1 W2.5B-04-19(Q)-02-00
3 Bolt M8X25 2 GB/T5783-86
4 Washer 8 2 GB/T93-87
5 Washer 8 2 GB/T97.1-85
6 Nut M8 2 GB/T6170-86
7 Nut M10 2 GB/6170-86
8 Steel Bar, Pressing Belt 1 W2.0A-04-20-03
9 Washer 10 2 GB/T97.1-85
10 Washer 10 2 GB/T93-87
11 Bolt M8X35 2 GB/T5783-86

- 304 -
 Limit Belt Holder Assy (W5.0-04Q-07YC-00)

NO. Description QTY Part Code Note

1 Limit Belt Holder Weld 1 W5.0-04Q-07-01-00
2 Frame Assy, Lower 1 W2.5B-04-19YC-02-00
3 Bolt M8X25 1 GB/T5783-86
4 Washer 8 2 GB/T93-87
5 Washer 8 2 GB/T97.1-85
6 Nut M8 2 GB/T6170-86
7 Nut M10 2 GB/6170-86
8 Steel Bar, Pressing Belt 1 W2.5B-04-19YC-04-00
9 Plate Assy 1 W5.0-04Q-07-02-00
10 Washer 10 2 GB/T97.1-85
11 Washer 10 2 GB/T93-87
12 Bolt M8X35 2 GB/T5783-86
13 Bolt M8X30 1 GB/T5783-86

- 305 -
 Limit Belt Holder Assy (W2.5B-04BX-19(YG)-00D)

NO. Description QTY Part Code Note

1 Limit Belt Holder Weld 1 W2.5B-04BX-19(YG)-01D-00
2 Nut M10 2 GB/6170-86
3 Washer 10 2 GB/T97.1-85
4 Washer 10 2 GB/T93-87
5 Bolt M8X40 2 GB/T5783-86
6 Washer 8 4 GB/T97.1-85
7 Washer 8 4 GB/93-87
8 Steel Bar Weld, Pressing Belt 1 W2.5B-04BX-19(YG)-02D-00
9 Frame Assy, Lower 1 W2.5B-04BX-19(YG)-03D-00
10 Bolt M8X80 2 GB/T5782-86

- 306 -
 Limit Belt Holder Assy (W2.5B-04BX-19(Y)-00D)

NO. Description QTY Part Code Note

1 Frame Assy, Lower 1 W2.5B-04-19(Y)-02-00
2 Bolt M8X25 2 GB/T5783-86
3 Washer 8 2 GB/T93-87
4 Washer 8 2 GB/T97.1-85
5 Nut M8 2 GB/T6170-86
6 Nut M10 2 GB/6170-86
7 Steel Bar, Pressing Belt 1 W2.5B-04-19(Y)-03
8 Limit Belt Holder Weld 1 W2.5B-04BX-19(Y)-01D-00
9 Washer 10 2 GB/T93-87
10 Washer 10 2 GB/T97.1-85

- 307 -
 Limit Belt Holder Assy (W2.5B-04-19X-00)

NO. Description QTY Part Code Note

1 Limit Belt Holder Weld 1 W2.5B-04-19X-01-00
2 Nut M10 2 GB/6170-86
3 Washer 10 2 GB/T97.1-85
4 Washer 10 2 GB/T93-87
5 Steel Bar Weld, Pressing Belt 1 W2.5B-04-19X-02-00
6 Frame Assy, Lower 1 W2.5B-04-19X-03-00
7 Nut M8 2 GB/6170-86
8 Washer 8 2 GB/T93-87
9 Bolt M8X30 2 GB/T5783-86
10 Washer 8 2 GB/T96-85

- 308 -