Scribd
Upload
159 views5 pages

Calculation of Vertical Stiffness - ULS: Pressuremeter Module B 1200 E

This document contains calculations for determining the vertical stiffness of soil layers for a pile foundation. It includes soil properties, pressuremeter test results, and calculations of shaft friction, end bearing, and vertical stiffness for 15 soil layers down to a depth of 74.04 meters. The soil consists primarily of fine-grained marine clay with a pressuremeter modulus ranging from 19 to 80 MPa. Vertical stiffness values were calculated using t-z curves and ranged from 117,286 kN/m to 502,655 kN/m.

Uploaded by

Devang Gajera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
159 views5 pages

Calculation of Vertical Stiffness - ULS: Pressuremeter Module B 1200 E

This document contains calculations for determining the vertical stiffness of soil layers for a pile foundation. It includes soil properties, pressuremeter test results, and calculations of shaft friction, end bearing, and vertical stiffness for 15 soil layers down to a depth of 74.04 meters. The soil consists primarily of fine-grained marine clay with a pressuremeter modulus ranging from 19 to 80 MPa. Vertical stiffness values were calculated using t-z curves and ranged from 117,286 kN/m to 502,655 kN/m.

Uploaded by

Devang Gajera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

Calculation of Vertical Stiffness_ULS

EM Pressuremeter Module
B Pile Diameter 1.20 m 1200 mm

Type of Soil Fine Grain Soil

qs= Shaft Friction


qu= End Bearing

Soil Pressuremeter
Soil Top Module S1 (Friction) = S2 (Friction) = (qs- S1 (End Bearing) =
Sl no Soil Layer Bottom (Em/pl*)*(pl*)
KϮ (N/mm3) Kq (N/mm3) qs (N/mm2) qu (N/mm2)
Layer (m) Layer (m) (0.5*qs/KϮ) 0.5*qs)/(0.2*KϮ) (0.5*qu/Kq)
(N/mm2)

1 MMG Iva 84.0397 83.0397 19 0.031 0.17 0.07 1.55 1.10 5.5 4.5

2 MMG III 83.0397 82.0397 35 0.059 0.32 0.15 3.42 1.29 6.5 5.3

3 MMG II 82.0397 81.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

4 MMG II 81.0397 80.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

5 MMG II 80.0397 79.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1
Calculation of Vertical Stiffness_ULS
6 MMG II 79.0397 78.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

7 MMG II 78.0397 77.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

8 MMG II 77.0397 76.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

9 MMG II 76.0397 75.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

10 MMG II 75.0397 74.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

11 MMG II 74.0397 73.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

12 MMG II 73.0397 72.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

13 MMG II 72.0397 71.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

14 MMG II 71.0397 70.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1

15 MMG II 70.0397 69.0397 80 0.133 0.73 0.30 6.00 1.13 5.6 4.1
S2 (End Bearing) =
(qu-0.5*qu)/(0.2*Kq)

22.6

26.5

20.5

20.5

20.5
20.5

20.5

20.5

20.5

20.5

20.5

20.5

20.5

20.5

20.5
Vetical Stiffness of Soil
Modulus of
Subgrade Vertical
Elastic
Sl. No. Layer type Level (m) Pile Reaction (kt or Stiffness
settlement (mm)
(N/mm)
kq) (N/mm3)

1.5
1
1 MMG Iva 84.040 0.0311 117286 1.10
0.5
0
0.001.00 2.00
t-z
1.5
1
2 MMG III 83.040 0.0587 . 1.29
0.5
0
t-z 0.00 1.00 2.00

1.5
1
3 MMG II 82.040 0.1333 502655 1.13
0.5
0
t-z [Link]

1.5
1
4 MMG II 81.040 0.1333 502655 1.13
0.5
0
t-z 0.00 1.00 2.00

1.5
1
5 MMG II 80.040 0.1333 502655 1.13
0.5
0
[Link]
t-z
1.5
1
6 MMG II 79.040 0.1333 502655 1.13
0.5
0
[Link]
t-z
1.5
1
7 MMG II 78.040 0.1333 502655 1.13
0.5
0
t-z [Link]

1.5
1
8 MMG II 77.040 0.1333 502655 0.5 1.13
0

t-z
1.5
1
9 MMG II 76.040 0.1333 502655 1.13
0.5
0
t-z [Link]

1.5
1
10 MMG II 75.040 0.1333 502655 1.13
0.5
0
t-z 0.00 1.00 2.00

1.5
1
11 MMG II 74.040 0.1333 502655 1.13
0.5
0

t-z
1.5
1
12 MMG II 73.040 0.1333 502655 1.13
0.5
0
t-z [Link]

1.5
1
13 MMG II 72.040 0.1333 502655 1.13
0.5
0
0.00 1.00 2.00
t-z
1.5
1
14 MMG II 71.040 0.1333 502655 1.13
0.5
0
0.00 1.00 2.00
t-z
1.5
1
15 MMG II 70.040 0.1333 502655 1.13
0.5
0
[Link]
t-z
69.04 1.5
1.5
1.51.5
1.5
1 1111
End Bearing 0.7333 829380 4.090.5
0.50.5
0.5
0.5
0 000
0
[Link].00
1.00 2.00
[Link]
[Link]
q-z [Link]

You might also like