Scribd
Upload
93 views2 pages

Section Properties and Dimensions Analysis

The document describes the geometry of an I-section beam composed of steel sheets. It provides the dimensions, materials, angles of rotation, and key properties such as cross-sectional area, moments of inertia, radii of gyration, elastic and plastic moduli, and distances to centroids and axes. The overall beam dimensions are 150 x 632 mm and it is composed of 4 steel sheets, two at 150 x 16 mm and two at 600 x 12 mm, each rotated 90 degrees.

Uploaded by

Krishna Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
93 views2 pages

Section Properties and Dimensions Analysis

The document describes the geometry of an I-section beam composed of steel sheets. It provides the dimensions, materials, angles of rotation, and key properties such as cross-sectional area, moments of inertia, radii of gyration, elastic and plastic moduli, and distances to centroids and axes. The overall beam dimensions are 150 x 632 mm and it is composed of 4 steel sheets, two at 150 x 16 mm and two at 600 x 12 mm, each rotated 90 degrees.

Uploaded by

Krishna Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as RTF, PDF, TXT or read online on Scribd

V

Section element Rotation angle Mirror Material E (kN/mm^2)


Sheet 150 x 16 Steel 205.0
Sheet 600 x 12 90.0 Steel 205.0
Sheet 150 x 16 Steel 205.0
Sheet 600 x 12 90.0 Steel 205.0
Sheet 600 x 12 90.0 Steel 205.0

The overall dimentions of the section are 150 x 632 mm

Basic geometry of the section


Parameter Value
A Cross sectional area 26400.0 mm2
a Angle between Y-Z and U-V axes 0.0 deg
4
Iy Moment of inertia about axis parallel to Y 1103449600.0
passing through centroid
Iz Moment of inertia about axis parallel to Z 77817600.0 mm4
passing through centroid
It Torsional moment of inertia (St. Venant) 1358379.05 mm4
iy Radius of gyration about axis parallel to Y 204.44 mm
passing through centroid
iz Radius of gyration about axis parallel to Z 54.29 mm
passing through centroid
Wu+ Max elastic modulus about U-axis 3491929.11 mm3
Wu- Min elastic modulus about U-axis 3491929.11 mm3
Wv+ Max elastic modulus about V-axis 1037568.0 mm3
Wv- Min elastic modulus about V-axis 1037568.0 mm3
Wpl,u Plastic modulus about U-axis 4736307.33 mm3
Wpl,v Plastic modulus about V-axis 1202754.0 mm3
4
Iu Moment of inertia about U-axis 1103449600.0
Iv Moment of inertia about V-axis 77817600.0 mm4
iu Radius of gyration about U-axis 204.44 mm
iv Radius of gyration about V-axis 54.29 mm
au+ Centroid to edge of compression zone along +ve 39.3 mm
U-axis
au- Centroid to edge of compression zone along -ve 39.3 mm
U-axis
av+ Centroid to edge of compression zone along +ve 132.27 mm
V-axis
av- Centroid to edge of compression zone along -ve 132.27 mm
V-axis
yM Distance to centroid along Y-axis 75.0 mm
zM Distance to centroid along Z-axis ­316.0 mm
yP Distance to equal area axis along Y-axis 75.1 mm
zP Distance to equal area axis along Z-axis ­314.4 mm

You might also like