Open Source Linux Robotics Software

GCBASIC is an open-source BASIC compiler for 8 bit Microchip PIC, Atmel AVR legacy, AVRDx and LGT microcontrollers. See https://ko-fi.com/post/The-Story-of-GCBASIC-Making-Microcontroller-Progr-D1D319SJ72 for story of GCBASIC. This is a continuous release project. The latest release is always available. This will give you the most complete development toolchain to create and program 8-bit PIC, AVR and LGT microcontrollers. We have added new capabilities that make GCBASIC the easiest tool set available - supporting over 1400 microcontrollers with tools to make this fun and simple. Please see the download section for your options. We have two IDEs, we have just the compiler and we have a minimal install - it is your choice. Please see the homepage here: https://gcbasic.com

This repository contains several Arduino libraries I have written to be used in applications. Most of them include example code on how the libraries can be used. Furthermore, this repository contains a few stand-alone applications. For bugs in the libraries, please fill in an issue in Github as that makes it far easier to track them. If possible provide a minimal code snippet that exposes the bug. Add information about the platform used and version etc. Also, proposals for solutions are welcome. For improvements and changes, please provide a pull request. I will try to follow up on them asap but it can take quite some time. Please try to be generic in your improvements and try to see "over the needs of your own application".

Arduino support for almost every classic tinyAVR device! Supports ATtiny 1634, 2313/4313, 24/44/84, 441/841, 25/45/85, 261/461/861, 87/167, 48/88, 43 and 828. Supports programming vis ISP, Serial (Optiboot - all parts with >4k flash, and all parts with 4k flash for which an 8k version is available) or VUSB (Micronucleus - where appropriate) There are 272 different versions of micronucleus built (and part of the 2.0.0-dev branch now), and optiboot will dwarf that number! 0 of those have been tested. Obviously, we are leaning very heavily on automation of configuration generation for this release. Half of the tinyNeoPixel speeds have had the assembly routines modified in major ways (there's no more stupid menu for the port), but they are untested. Virtual boot relies on rewriting the vector table, such that the RESET vector points to the bootloader.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

This library allows you to make the ESP32 act as a Bluetooth Keyboard and control what it does. Compatible with Android. Compatible with Windows. Compatible with Linux. Compatible with MacOS X (not stable, some people have issues, doesn't work with old devices). Compatible with iOS (not stable, some people have issues, doesn't work with old devices). There is also Bluetooth-specific information that you can set (optional): Instead of BleKeyboard bleKeyboard; you can do BleKeyboard bleKeyboard("Bluetooth Device Name", "Bluetooth Device Manufacturer", 100);. (Max length is 15 characters, anything beyond that will be truncated.) By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Keyboard and the manufacturer will be Espressif. This feature is meant to compensate for some applications and devices that can't handle fast input and will skip letters if too many keys are sent in a small time frame.

PHPXref is a developers tool, written in Perl, that will cross reference and extract inline documentation from a collection of PHP scripts. It generates simple HTML output suitable for browsing offline.

Arduino library for parsing and decoding MOD, WAV, MP3, FLAC, MIDI, AAC, and RTTL files and playing them on an I2S DAC or even using a software-simulated delta-sigma DAC with dynamic 32x-128x oversampling. ESP8266 is fully supported and most mature, but ESP32 is also mostly there with built-in DAC as well as external ones. For real-time, autonomous speech synthesis, check out ESP8266SAM, a library that uses this one and a port of an ancient format-based synthesis program to allow your ESP8266 to talk with low memory and no network required. All this code is released under the GPL, and all of it is to be used at your own risk. If you find any bugs, please let me know via the GitHub issue tracker or drop me an email. The MOD and MP3 routines were taken from StellaPlayer and libMAD respectively. The software I2S delta-sigma 32x oversampling DAC was my own creation and sounds quite good if I do say so myself.

MARIE is a robotic development and integration environment focused on software reusability and exploitation of already available APIs and middlewares used in robotics. Its main purpose is to create a rapid-prototyping approach to robotics developments.

This library adds MIDI I/O communications to an Arduino board. MIDI over USB, Bluetooth, IP & AppleMIDI (see Transports). Active Sensing support. Compatible with all Arduino boards (and clones with an AVR processor). Simple and fast way to send and receive every kind of MIDI message (including all System messages, SysEx, Clock, etc..). OMNI input reading (read all channels). Software Thru, with message filtering. Callbacks to handle input messages more easily. Last received message is saved until a new one arrives. Overridable template-based settings. Create more than one MIDI interface for mergers/splitters applications. Use any serial port, hardware or software. All USB-related code has been moved into a separate repository Arduino-USB-MIDI, USB MIDI Device support with MIDI USB, still using this library to do all the MIDI heavy-lifting.

Critterding is a "Petri dish" universe in 3D that demonstrates evolving artificial life. Critters start out with completely random brains and bodies, but will automatically start evolving into something with much better survival skills.

A 3D simulation library using the bullet physics engine and OpenGL for rendering.

A simulator that allows programs written in Java for a National Instruments CRIO to be run on a local computer by overloading the libraries provided by WPI. Some things we've fixed since 0.1a: Kinect no longer throws an exception upon instantiation, the Watchdog is usable, array elements can now be edited in the gui, and lots of under the hood reimplementation to replace native methods. DISCLAIMER: this is not like the diamond bullet studios simulation, this only simulates how the hardware would act, so that code can be tested. It is not our goal to provide a program that allows simulation for strategy testing, nor will it ever be.

Moved to code.ros.org

PROJECT DISCONTINUED ---------------------------------------- RESHL is a collection of Linux software used to interact with pen-master based haptic devices. Its name, ROS-Enhanced Scalable Haptic Library, describes all its main features: - ROS-Enhanced: the library can be used as a library in the ROS framework (Robot Operating System - http://www.ros.org/) and provides out-of-the-box support for master-slave solutions - Scalable: the library consists in different sub-libraries with different software dependencies. This way you don't have to install software for devices or functionality you're not going to use. Refer to Structure section for details on the single sub-libraries. - Haptic: the end-application is using pen-master devices to simulate the sense of touch in a haptic virtual environment. - Library: the software is distributed in c++ libraries with an easy interface. A graphic environment based on OpenGL is generated to improve the user's experience.

pyGerber2Gcode is a Pyhon based simple Gerber to G-code converter.

The Mars Rover Simulator project is based on the evolutionary robotics paradigm where an artificial agent acquires its skills through the process of artificial evolution. This simulator can be useful to evolve neural network controllers for the rover

The Sick LIDAR Matlab/C++ Toolbox offers stable and easy-to-use C++ drivers for Sick LMS and Sick LD LIDARs. It provides a Matlab Mex interface for streaming LIDAR returns directly into Matlab. Also included are config utilities, examples, and tutorials.

clipsmm is a C++ interface to the CLIPS libray, a C library for developing expert systems.

Tcl/Tk interface for the SSC-32 servo controller. Sliders generate position commands and send them to the ssc32 via serial output. The number of servos can be changed. Positions can be captured and replayed using the macro function. Added group controls.

It's a simpler clone of RoboCode. It's a game which simulates tanks war. The focus is artificial intelligence AI, evolutive algorithms and neural networks. It's implemented in Java.

ARDev is an augmented reality toolkit to assist robot developers in debugging complex robot sensors.

Articulated Robot Human interface (Articulated Robot humaN InterfacE) System designed in order to control remote devices (aka: Articulated robotic devices), using mainly joystick-type devices as input method

A scheme (lisp) interpreter written in ARM assembly language (currently: Cortex-M4F,M7, Cortex-A5,A8,A9, Cortex-A53; previously:ARM7TDMI, ARM920T, Cortex-M3) for education, robotics, wearable devices. Tested on Allwinner A64, Amlogic S905, Atmel SAMA5D4, SAME70, SAMV71, NXP LPC4300, RT1050, iMX8M, Samsung S5P6818, ST STM32F4, STM32F7, and TI AM3359, OMAP3530, DM3730, OMAP4430, TM4C1294 chips (previously: NXP LPC-1300,1700,2000, ATMEL AT91SAM7, STM STR711, STR911, STM32, CIRRUS EP9302, LMI LM3S1968, TI OMAP).