added support for goobay Active USB 3.0 Data Link Cable #258

danielkucera · 2016-02-21T11:17:06Z

I added support for PL-27A1 just by defining new vendor/device id to current plusb driver. The chipset is identical to PL-25A1 except it support USB3.0 interface.

…27A1 chipset)

avertis · 2017-01-02T13:27:42Z

Please add this path to the mainline.

Fix boot mem size and lkl_set_fd_limit

…nd single if statement Fixed the followinf checkpatch warning: WARNING: braces {} are not necessary for single statement blocks torvalds#258: FILE: drivers/staging/iio/accel/adis16209.c:258: + if (ret) { + return ret; + } Signed-off-by: Andrea della Porta <[email protected]>

syzbot/kasan detected a double free in sctp_sendmsg_to_asoc: BUG: KASAN: use-after-free in sctp_association_free+0x7b7/0x930 net/sctp/associola.c:332 Read of size 8 at addr ffff8801d8006ae0 by task syzkaller914861/4202 CPU: 1 PID: 4202 Comm: syzkaller914861 Not tainted 4.16.0-rc4+ torvalds#258 Hardware name: Google Google Compute Engine/Google Compute Engine 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 sctp_association_free+0x7b7/0x930 net/sctp/associola.c:332 sctp_sendmsg+0xc67/0x1a80 net/sctp/socket.c:2075 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:763 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 SYSC_sendto+0x361/0x5c0 net/socket.c:1748 SyS_sendto+0x40/0x50 net/socket.c:1716 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 This was introduced by commit: f84af33 sctp: factor out sctp_sendmsg_to_asoc from sctp_sendmsg As the newly refactored function moved the wait_for_sndbuf call to a point after the association was connected, allowing for peeloff events to occur, which in turn caused wait_for_sndbuf to return -EPIPE which was not caught by the logic that determines if an association should be freed or not. Fix it the easy way by returning the ordering of sctp_primitive_ASSOCIATE and sctp_wait_for_sndbuf to the old order, to ensure that EPIPE will not happen. Tested by myself using the syzbot reproducers with positive results Signed-off-by: Neil Horman <[email protected]> CC: [email protected] CC: Xin Long <[email protected]> Reported-by: [email protected] Reviewed-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#250: FILE: kernel/cgroup/cgroup.c:4554: + {$ ERROR: code indent should use tabs where possible torvalds#251: FILE: kernel/cgroup/cgroup.c:4555: + .name = "cpu.pressure",$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: kernel/cgroup/cgroup.c:4555: + .name = "cpu.pressure",$ ERROR: code indent should use tabs where possible torvalds#252: FILE: kernel/cgroup/cgroup.c:4556: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: kernel/cgroup/cgroup.c:4556: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#253: FILE: kernel/cgroup/cgroup.c:4557: + .seq_show = cgroup_cpu_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: kernel/cgroup/cgroup.c:4557: + .seq_show = cgroup_cpu_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: kernel/cgroup/cgroup.c:4558: + },$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: kernel/cgroup/cgroup.c:4559: + {$ ERROR: code indent should use tabs where possible torvalds#256: FILE: kernel/cgroup/cgroup.c:4560: + .name = "memory.pressure",$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: kernel/cgroup/cgroup.c:4560: + .name = "memory.pressure",$ ERROR: code indent should use tabs where possible torvalds#257: FILE: kernel/cgroup/cgroup.c:4561: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: kernel/cgroup/cgroup.c:4561: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#258: FILE: kernel/cgroup/cgroup.c:4562: + .seq_show = cgroup_memory_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: kernel/cgroup/cgroup.c:4562: + .seq_show = cgroup_memory_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: kernel/cgroup/cgroup.c:4563: + },$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: kernel/cgroup/cgroup.c:4564: + {$ ERROR: code indent should use tabs where possible torvalds#261: FILE: kernel/cgroup/cgroup.c:4565: + .name = "io.pressure",$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: kernel/cgroup/cgroup.c:4565: + .name = "io.pressure",$ ERROR: code indent should use tabs where possible torvalds#262: FILE: kernel/cgroup/cgroup.c:4566: + .flags = CFTYPE_NOT_ON_ROOT,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: kernel/cgroup/cgroup.c:4566: + .flags = CFTYPE_NOT_ON_ROOT,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: kernel/cgroup/cgroup.c:4567: + .seq_show = cgroup_io_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: kernel/cgroup/cgroup.c:4567: + .seq_show = cgroup_io_pressure_show,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: kernel/cgroup/cgroup.c:4568: + },$ WARNING: please, no spaces at the start of a line torvalds#322: FILE: kernel/sched/psi.c:424: + cgroup = task->cgroups->dfl_cgrp;$ WARNING: please, no spaces at the start of a line torvalds#323: FILE: kernel/sched/psi.c:425: + while (cgroup && (parent = cgroup_parent(cgroup))) {$ WARNING: suspect code indent for conditional statements (7, 15) torvalds#323: FILE: kernel/sched/psi.c:425: + while (cgroup && (parent = cgroup_parent(cgroup))) { + struct psi_group *group; ERROR: code indent should use tabs where possible torvalds#324: FILE: kernel/sched/psi.c:426: + struct psi_group *group;$ WARNING: please, no spaces at the start of a line torvalds#324: FILE: kernel/sched/psi.c:426: + struct psi_group *group;$ ERROR: code indent should use tabs where possible torvalds#326: FILE: kernel/sched/psi.c:428: + group = cgroup_psi(cgroup);$ WARNING: please, no spaces at the start of a line torvalds#326: FILE: kernel/sched/psi.c:428: + group = cgroup_psi(cgroup);$ ERROR: code indent should use tabs where possible torvalds#327: FILE: kernel/sched/psi.c:429: + psi_group_change(group, cpu, now, clear, set);$ WARNING: please, no spaces at the start of a line torvalds#327: FILE: kernel/sched/psi.c:429: + psi_group_change(group, cpu, now, clear, set);$ ERROR: code indent should use tabs where possible torvalds#329: FILE: kernel/sched/psi.c:431: + cgroup = parent;$ WARNING: please, no spaces at the start of a line torvalds#329: FILE: kernel/sched/psi.c:431: + cgroup = parent;$ WARNING: please, no spaces at the start of a line torvalds#330: FILE: kernel/sched/psi.c:432: + }$ WARNING: braces {} are not necessary for any arm of this statement torvalds#378: FILE: kernel/sched/psi.c:537: + if (task_on_rq_queued(task)) { [...] + } else if (task->in_iowait) { [...] total: 13 errors, 24 warnings, 334 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/psi-cgroup-support.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Johannes Weiner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

This check erroneously flags cases like the one in my recent printk enumeration patch[0], where the spaces are syntactic, and `section:' vs. `section :' is syntactically important: ERROR: space prohibited before that ':' (ctx:WxW) torvalds#258: FILE: include/asm-generic/vmlinux.lds.h:314: + .printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) { 0: https://lore.kernel.org/patchwork/patch/1375749/ Signed-off-by: Chris Down <[email protected]> Cc: Andrew Morton <[email protected]>

This check erroneously flags cases like the one in my recent printk enumeration patch[0], where the spaces are syntactic, and `section:' vs. `section :' is syntactically important: ERROR: space prohibited before that ':' (ctx:WxW) torvalds#258: FILE: include/asm-generic/vmlinux.lds.h:314: + .printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) { 0: https://lore.kernel.org/patchwork/patch/1375749/ Signed-off-by: Chris Down <[email protected]> Cc: Andy Whitcroft <[email protected]> Cc: Joe Perches <[email protected]> Cc: Andrew Morton <[email protected]>

This reverts commit 206778f. When the OF bit is set, we want to ignore the stored value until it's overwritten by a new one because it's known to be invalid. The OF bit is being cleared in m41t80_rtc_set_time already, so once the kernel stores a valid value into RTC it can get read on next boot without issues. Closes torvalds#258

This check erroneously flags cases like the one in my recent printk enumeration patch[0], where the spaces are syntactic, and `section:' vs. `section :' is syntactically important: ERROR: space prohibited before that ':' (ctx:WxW) torvalds#258: FILE: include/asm-generic/vmlinux.lds.h:314: + .printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) { 0: https://lore.kernel.org/patchwork/patch/1375749/ Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Chris Down <[email protected]> Cc: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

This check erroneously flags cases like the one in my recent printk enumeration patch[0], where the spaces are syntactic, and `section:' vs. `section :' is syntactically important: ERROR: space prohibited before that ':' (ctx:WxW) torvalds#258: FILE: include/asm-generic/vmlinux.lds.h:314: + .printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) { 0: https://lore.kernel.org/patchwork/patch/1375749/ Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Chris Down <[email protected]> Acked-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

This check erroneously flags cases like the one in my recent printk enumeration patch[0], where the spaces are syntactic, and `section:' vs. `section :' is syntactically important: ERROR: space prohibited before that ':' (ctx:WxW) #258: FILE: include/asm-generic/vmlinux.lds.h:314: + .printk_fmts : AT(ADDR(.printk_fmts) - LOAD_OFFSET) { 0: https://lore.kernel.org/patchwork/patch/1375749/ Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Chris Down <[email protected]> Acked-by: Joe Perches <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>

This patch will address the following warning and style violations generated by ./scripts/checkpatch.pl in strict mode: WARNING: Use #include <linux/module.h> instead of <asm/module.h> torvalds#10: FILE: kernel/module/internal.h:10: +#include <asm/module.h> CHECK: spaces preferred around that '-' (ctx:VxV) torvalds#18: FILE: kernel/module/internal.h:18: +#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#69: FILE: kernel/module/internal.h:69: +} +static inline void module_decompress_cleanup(struct load_info *info) ^ CHECK: extern prototypes should be avoided in .h files torvalds#84: FILE: kernel/module/internal.h:84: +extern int mod_verify_sig(const void *mod, struct load_info *info); WARNING: Missing a blank line after declarations torvalds#116: FILE: kernel/module/decompress.c:116: + struct page *page = module_get_next_page(info); + if (!page) { WARNING: Missing a blank line after declarations torvalds#174: FILE: kernel/module/decompress.c:174: + struct page *page = module_get_next_page(info); + if (!page) { CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#258: FILE: kernel/module/decompress.c:258: +} +static struct kobj_attribute module_compression_attr = __ATTR_RO(compression); Note: Fortunately, the multiple-include optimisation found in include/linux/module.h will prevent duplication/or inclusion more than once. Fixes: f314dfe ("modsign: log module name in the event of an error") Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Aaron Tomlin <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]>

This patch will address the following warning and style violations generated by ./scripts/checkpatch.pl in strict mode: WARNING: Use #include <linux/module.h> instead of <asm/module.h> torvalds#10: FILE: kernel/module/internal.h:10: +#include <asm/module.h> CHECK: spaces preferred around that '-' (ctx:VxV) torvalds#18: FILE: kernel/module/internal.h:18: +#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#69: FILE: kernel/module/internal.h:69: +} +static inline void module_decompress_cleanup(struct load_info *info) ^ CHECK: extern prototypes should be avoided in .h files torvalds#84: FILE: kernel/module/internal.h:84: +extern int mod_verify_sig(const void *mod, struct load_info *info); WARNING: Missing a blank line after declarations torvalds#116: FILE: kernel/module/decompress.c:116: + struct page *page = module_get_next_page(info); + if (!page) { WARNING: Missing a blank line after declarations torvalds#174: FILE: kernel/module/decompress.c:174: + struct page *page = module_get_next_page(info); + if (!page) { CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#258: FILE: kernel/module/decompress.c:258: +} +static struct kobj_attribute module_compression_attr = __ATTR_RO(compression); Note: Fortunately, the multiple-include optimisation found in include/linux/module.h will prevent duplication/or inclusion more than once. Fixes: f314dfe ("modsign: log module name in the event of an error") Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Aaron Tomlin <[email protected]>

WARNING: please, no spaces at the start of a line torvalds#249: FILE: mm/page-writeback.c:2089: + {$ ERROR: code indent should use tabs where possible torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ WARNING: please, no spaces at the start of a line torvalds#250: FILE: mm/page-writeback.c:2090: + .procname = "dirty_background_ratio",$ ERROR: code indent should use tabs where possible torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ WARNING: please, no spaces at the start of a line torvalds#251: FILE: mm/page-writeback.c:2091: + .data = &dirty_background_ratio,$ ERROR: code indent should use tabs where possible torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ WARNING: please, no spaces at the start of a line torvalds#252: FILE: mm/page-writeback.c:2092: + .maxlen = sizeof(dirty_background_ratio),$ ERROR: code indent should use tabs where possible torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#253: FILE: mm/page-writeback.c:2093: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#254: FILE: mm/page-writeback.c:2094: + .proc_handler = dirty_background_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#255: FILE: mm/page-writeback.c:2095: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#256: FILE: mm/page-writeback.c:2096: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#257: FILE: mm/page-writeback.c:2097: + },$ WARNING: please, no spaces at the start of a line torvalds#258: FILE: mm/page-writeback.c:2098: + {$ ERROR: code indent should use tabs where possible torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ WARNING: please, no spaces at the start of a line torvalds#259: FILE: mm/page-writeback.c:2099: + .procname = "dirty_background_bytes",$ ERROR: code indent should use tabs where possible torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ WARNING: please, no spaces at the start of a line torvalds#260: FILE: mm/page-writeback.c:2100: + .data = &dirty_background_bytes,$ ERROR: code indent should use tabs where possible torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ WARNING: please, no spaces at the start of a line torvalds#261: FILE: mm/page-writeback.c:2101: + .maxlen = sizeof(dirty_background_bytes),$ ERROR: code indent should use tabs where possible torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#262: FILE: mm/page-writeback.c:2102: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#263: FILE: mm/page-writeback.c:2103: + .proc_handler = dirty_background_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#264: FILE: mm/page-writeback.c:2104: + .extra1 = SYSCTL_LONG_ONE,$ WARNING: please, no spaces at the start of a line torvalds#265: FILE: mm/page-writeback.c:2105: + },$ WARNING: please, no spaces at the start of a line torvalds#266: FILE: mm/page-writeback.c:2106: + {$ ERROR: code indent should use tabs where possible torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ WARNING: please, no spaces at the start of a line torvalds#267: FILE: mm/page-writeback.c:2107: + .procname = "dirty_ratio",$ ERROR: code indent should use tabs where possible torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ WARNING: please, no spaces at the start of a line torvalds#268: FILE: mm/page-writeback.c:2108: + .data = &vm_dirty_ratio,$ ERROR: code indent should use tabs where possible torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ WARNING: please, no spaces at the start of a line torvalds#269: FILE: mm/page-writeback.c:2109: + .maxlen = sizeof(vm_dirty_ratio),$ ERROR: code indent should use tabs where possible torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#270: FILE: mm/page-writeback.c:2110: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ WARNING: please, no spaces at the start of a line torvalds#271: FILE: mm/page-writeback.c:2111: + .proc_handler = dirty_ratio_handler,$ ERROR: code indent should use tabs where possible torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#272: FILE: mm/page-writeback.c:2112: + .extra1 = SYSCTL_ZERO,$ ERROR: code indent should use tabs where possible torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#273: FILE: mm/page-writeback.c:2113: + .extra2 = SYSCTL_ONE_HUNDRED,$ WARNING: please, no spaces at the start of a line torvalds#274: FILE: mm/page-writeback.c:2114: + },$ WARNING: please, no spaces at the start of a line torvalds#275: FILE: mm/page-writeback.c:2115: + {$ ERROR: code indent should use tabs where possible torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ WARNING: please, no spaces at the start of a line torvalds#276: FILE: mm/page-writeback.c:2116: + .procname = "dirty_bytes",$ ERROR: code indent should use tabs where possible torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ WARNING: please, no spaces at the start of a line torvalds#277: FILE: mm/page-writeback.c:2117: + .data = &vm_dirty_bytes,$ ERROR: code indent should use tabs where possible torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ WARNING: please, no spaces at the start of a line torvalds#278: FILE: mm/page-writeback.c:2118: + .maxlen = sizeof(vm_dirty_bytes),$ ERROR: code indent should use tabs where possible torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#279: FILE: mm/page-writeback.c:2119: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ WARNING: please, no spaces at the start of a line torvalds#280: FILE: mm/page-writeback.c:2120: + .proc_handler = dirty_bytes_handler,$ ERROR: code indent should use tabs where possible torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#281: FILE: mm/page-writeback.c:2121: + .extra1 = (void *)&dirty_bytes_min,$ WARNING: please, no spaces at the start of a line torvalds#282: FILE: mm/page-writeback.c:2122: + },$ WARNING: please, no spaces at the start of a line torvalds#283: FILE: mm/page-writeback.c:2123: + {$ ERROR: code indent should use tabs where possible torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#284: FILE: mm/page-writeback.c:2124: + .procname = "dirty_writeback_centisecs",$ ERROR: code indent should use tabs where possible torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ WARNING: please, no spaces at the start of a line torvalds#285: FILE: mm/page-writeback.c:2125: + .data = &dirty_writeback_interval,$ ERROR: code indent should use tabs where possible torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ WARNING: please, no spaces at the start of a line torvalds#286: FILE: mm/page-writeback.c:2126: + .maxlen = sizeof(dirty_writeback_interval),$ ERROR: code indent should use tabs where possible torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#287: FILE: mm/page-writeback.c:2127: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#288: FILE: mm/page-writeback.c:2128: + .proc_handler = dirty_writeback_centisecs_handler,$ WARNING: please, no spaces at the start of a line torvalds#289: FILE: mm/page-writeback.c:2129: + },$ WARNING: please, no spaces at the start of a line torvalds#290: FILE: mm/page-writeback.c:2130: + {$ ERROR: code indent should use tabs where possible torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ WARNING: please, no spaces at the start of a line torvalds#291: FILE: mm/page-writeback.c:2131: + .procname = "dirty_expire_centisecs",$ ERROR: code indent should use tabs where possible torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ WARNING: please, no spaces at the start of a line torvalds#292: FILE: mm/page-writeback.c:2132: + .data = &dirty_expire_interval,$ ERROR: code indent should use tabs where possible torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ WARNING: please, no spaces at the start of a line torvalds#293: FILE: mm/page-writeback.c:2133: + .maxlen = sizeof(dirty_expire_interval),$ ERROR: code indent should use tabs where possible torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ WARNING: please, no spaces at the start of a line torvalds#294: FILE: mm/page-writeback.c:2134: + .mode = 0644,$ ERROR: code indent should use tabs where possible torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ WARNING: please, no spaces at the start of a line torvalds#295: FILE: mm/page-writeback.c:2135: + .proc_handler = proc_dointvec_minmax,$ ERROR: code indent should use tabs where possible torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#296: FILE: mm/page-writeback.c:2136: + .extra1 = SYSCTL_ZERO,$ WARNING: please, no spaces at the start of a line torvalds#297: FILE: mm/page-writeback.c:2137: + },$ total: 37 errors, 49 warnings, 287 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/mm-move-page-writeback-sysctls-to-is-own-file.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Iurii Zaikin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: zhanglianjie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>

This patch will address the following warning and style violations generated by ./scripts/checkpatch.pl in strict mode: WARNING: Use #include <linux/module.h> instead of <asm/module.h> torvalds#10: FILE: kernel/module/internal.h:10: +#include <asm/module.h> CHECK: spaces preferred around that '-' (ctx:VxV) torvalds#18: FILE: kernel/module/internal.h:18: +#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#69: FILE: kernel/module/internal.h:69: +} +static inline void module_decompress_cleanup(struct load_info *info) ^ CHECK: extern prototypes should be avoided in .h files torvalds#84: FILE: kernel/module/internal.h:84: +extern int mod_verify_sig(const void *mod, struct load_info *info); WARNING: Missing a blank line after declarations torvalds#116: FILE: kernel/module/decompress.c:116: + struct page *page = module_get_next_page(info); + if (!page) { WARNING: Missing a blank line after declarations torvalds#174: FILE: kernel/module/decompress.c:174: + struct page *page = module_get_next_page(info); + if (!page) { CHECK: Please use a blank line after function/struct/union/enum declarations torvalds#258: FILE: kernel/module/decompress.c:258: +} +static struct kobj_attribute module_compression_attr = __ATTR_RO(compression); Note: Fortunately, the multiple-include optimisation found in include/linux/module.h will prevent duplication/or inclusion more than once. Fixes: f314dfe ("modsign: log module name in the event of an error") Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Aaron Tomlin <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]>

Add a bigger batch of test coverage to assert correct operation of netkit devices and their BPF program management: # ./test_progs -t tc_netkit [...] [ 1.166267] bpf_testmod: loading out-of-tree module taints kernel. [ 1.166831] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270957] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.275336] clocksource: Switched to clocksource tsc torvalds#257 tc_netkit_basic:OK torvalds#258 tc_netkit_device:OK torvalds#259 tc_netkit_multi_links:OK torvalds#260 tc_netkit_multi_opts:OK torvalds#261 tc_netkit_neigh_links:OK Summary: 5/0 PASSED, 0 SKIPPED, 0 FAILED [...] Signed-off-by: Daniel Borkmann <[email protected]>

Add a bigger batch of test coverage to assert correct operation of netkit devices and their BPF program management: # ./test_progs -t tc_netkit [...] [ 1.166267] bpf_testmod: loading out-of-tree module taints kernel. [ 1.166831] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270957] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.275336] clocksource: Switched to clocksource tsc torvalds#257 tc_netkit_basic:OK torvalds#258 tc_netkit_device:OK torvalds#259 tc_netkit_multi_links:OK torvalds#260 tc_netkit_multi_opts:OK torvalds#261 tc_netkit_neigh_links:OK Summary: 5/0 PASSED, 0 SKIPPED, 0 FAILED [...] Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>

arm64: dts: cm3 io: Modify the default power LED Status

* dt-bindings: fsi: Document the IBM SBEFIFO engine The SBEFIFO engine provides an interface to the POWER processor Self Boot Engine (SBE). Signed-off-by: Eddie James <[email protected]> * fsi: sbefifo: Prevent async FFDC collection for Odyssey SBEFIFOs Newer SBEs will return any async FFDC in the next transaction, so collecting the FFDC is unnecessary and results in unexpected behavior. Turn off the async collection for newer SBEFIFOs. Signed-off-by: Eddie James <[email protected]> * ARM: dts: aspeed: Update Odyssey SBEFIFO compatible strings Set the new compatible string for Odyssey SBEFIFOs so that they don't collect async FFDC. Signed-off-by: Eddie James <[email protected]> --------- Signed-off-by: Eddie James <[email protected]> Co-authored-by: Eddie James <[email protected]>

If streamon/streamoff calls are imbalanced, such as exit application with Ctrl+C when streaming, m2m usage_count will never reach to zero and ISI channel won't be freed. Besides from that, if the input line width is more 2K and exit with Ctrl+C when streaming, it will trigger kernel panic, like bellow: [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- VIDIOC_STREAMON returned -1 (Invalid argument) So check the queue streaming status when application close and call streamoff to fix the issue. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Signed-off-by: Guoniu Zhou <[email protected]>

If streamon/streamoff calls are imbalanced, such as exit application with Ctrl+C when streaming, m2m usage_count will never reach to zero and ISI channel won't be freed. Besides from that, if the input line width is more 2K and exit with Ctrl+C when streaming, it will trigger kernel panic, like bellow: [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- VIDIOC_STREAMON returned -1 (Invalid argument) So check the queue streaming status when application close and call streamoff to fix the issue. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Reviewed-by: Frank Li <[email protected]> Signed-off-by: Guoniu Zhou <[email protected]>

If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ Adjust context ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ added bypass parameter to mxc_isi_channel_chain() call ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ Adjust context ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ added bypass parameter to mxc_isi_channel_chain() call ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ Adjust context ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ added bypass parameter to mxc_isi_channel_chain() call ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 178aa33 ] If streamon/streamoff calls are imbalanced, such as when exiting an application with Ctrl+C when streaming, the m2m usage_count will never reach zero and the ISI channel won't be freed. Besides from that, if the input line width is more than 2K, it will trigger a WARN_ON(): [ 59.222120] ------------[ cut here ]------------ [ 59.226758] WARNING: drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c:631 at mxc_isi_channel_chain+0xa4/0x120, CPU#4: v4l2-ctl/654 [ 59.238569] Modules linked in: ap1302 [ 59.242231] CPU: 4 UID: 0 PID: 654 Comm: v4l2-ctl Not tainted 6.16.0-rc4-next-20250704-06511-gff0e002d480a-dirty torvalds#258 PREEMPT [ 59.253597] Hardware name: NXP i.MX95 15X15 board (DT) [ 59.258720] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 59.265669] pc : mxc_isi_channel_chain+0xa4/0x120 [ 59.270358] lr : mxc_isi_channel_chain+0x44/0x120 [ 59.275047] sp : ffff8000848c3b40 [ 59.278348] x29: ffff8000848c3b40 x28: ffff0000859b4c98 x27: ffff800081939f00 [ 59.285472] x26: 000000000000000a x25: ffff0000859b4cb8 x24: 0000000000000001 [ 59.292597] x23: ffff0000816f4760 x22: ffff0000816f4258 x21: ffff000084ceb780 [ 59.299720] x20: ffff000084342ff8 x19: ffff000084340000 x18: 0000000000000000 [ 59.306845] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffdb369e1c [ 59.313969] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 59.321093] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 [ 59.328217] x8 : ffff8000848c3d48 x7 : ffff800081930b30 x6 : ffff800081930b30 [ 59.335340] x5 : ffff0000859b6000 x4 : ffff80008193ae80 x3 : ffff800081022420 [ 59.342464] x2 : ffff0000852f6900 x1 : 0000000000000001 x0 : ffff000084341000 [ 59.349590] Call trace: [ 59.352025] mxc_isi_channel_chain+0xa4/0x120 (P) [ 59.356722] mxc_isi_m2m_streamon+0x160/0x20c [ 59.361072] v4l_streamon+0x24/0x30 [ 59.364556] __video_do_ioctl+0x40c/0x4a0 [ 59.368560] video_usercopy+0x2bc/0x690 [ 59.372382] video_ioctl2+0x18/0x24 [ 59.375857] v4l2_ioctl+0x40/0x60 [ 59.379168] __arm64_sys_ioctl+0xac/0x104 [ 59.383172] invoke_syscall+0x48/0x104 [ 59.386916] el0_svc_common.constprop.0+0xc0/0xe0 [ 59.391613] do_el0_svc+0x1c/0x28 [ 59.394915] el0_svc+0x34/0xf4 [ 59.397966] el0t_64_sync_handler+0xa0/0xe4 [ 59.402143] el0t_64_sync+0x198/0x19c [ 59.405801] ---[ end trace 0000000000000000 ]--- Address this issue by moving the streaming preparation and cleanup to the vb2 .prepare_streaming() and .unprepare_streaming() operations. This also simplifies the driver by allowing direct usage of the v4l2_m2m_ioctl_streamon() and v4l2_m2m_ioctl_streamoff() helpers. Fixes: cf21f32 ("media: nxp: Add i.MX8 ISI driver") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guoniu Zhou <[email protected]> Co-developed-by: Laurent Pinchart <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]> Tested-by: Guoniu Zhou <[email protected]> Reviewed-by: Frank Li <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> [ Adjust context ] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit 21ce6ab Add a detachment test case with miniq present to assert that with and without the miniq we get the same error. # ./test_progs -t tc_opts torvalds#244 tc_opts_after:OK torvalds#245 tc_opts_append:OK torvalds#246 tc_opts_basic:OK torvalds#247 tc_opts_before:OK torvalds#248 tc_opts_chain_classic:OK torvalds#249 tc_opts_delete_empty:OK torvalds#250 tc_opts_demixed:OK torvalds#251 tc_opts_detach:OK torvalds#252 tc_opts_detach_after:OK torvalds#253 tc_opts_detach_before:OK torvalds#254 tc_opts_dev_cleanup:OK torvalds#255 tc_opts_invalid:OK torvalds#256 tc_opts_mixed:OK torvalds#257 tc_opts_prepend:OK torvalds#258 tc_opts_replace:OK torvalds#259 tc_opts_revision:OK Summary: 16/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]> (cherry picked from commit 21ce6ab) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit ccd9a8b Add several new tcx test cases to improve test coverage. This also includes a few new tests with ingress instead of clsact qdisc, to cover the fix from commit dc644b5 ("tcx: Fix splat in ingress_destroy upon tcx_entry_free"). # ./test_progs -t tc [...] torvalds#234 tc_links_after:OK torvalds#235 tc_links_append:OK torvalds#236 tc_links_basic:OK torvalds#237 tc_links_before:OK torvalds#238 tc_links_chain_classic:OK torvalds#239 tc_links_chain_mixed:OK torvalds#240 tc_links_dev_cleanup:OK torvalds#241 tc_links_dev_mixed:OK torvalds#242 tc_links_ingress:OK torvalds#243 tc_links_invalid:OK torvalds#244 tc_links_prepend:OK torvalds#245 tc_links_replace:OK torvalds#246 tc_links_revision:OK torvalds#247 tc_opts_after:OK torvalds#248 tc_opts_append:OK torvalds#249 tc_opts_basic:OK torvalds#250 tc_opts_before:OK torvalds#251 tc_opts_chain_classic:OK torvalds#252 tc_opts_chain_mixed:OK torvalds#253 tc_opts_delete_empty:OK torvalds#254 tc_opts_demixed:OK torvalds#255 tc_opts_detach:OK torvalds#256 tc_opts_detach_after:OK torvalds#257 tc_opts_detach_before:OK torvalds#258 tc_opts_dev_cleanup:OK torvalds#259 tc_opts_invalid:OK torvalds#260 tc_opts_mixed:OK torvalds#261 tc_opts_prepend:OK torvalds#262 tc_opts_replace:OK torvalds#263 tc_opts_revision:OK [...] Summary: 44/38 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/8699efc284b75ccdc51ddf7062fa2370330dc6c0.1692029283.git.daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <[email protected]> (cherry picked from commit ccd9a8b) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit d1a783d Add various tests to check maximum number of supported programs being attached: # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.185325] bpf_testmod: loading out-of-tree module taints kernel. [ 1.186826] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel [ 1.270123] tsc: Refined TSC clocksource calibration: 3407.988 MHz [ 1.272428] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fc932722, max_idle_ns: 440795381586 ns [ 1.276408] clocksource: Switched to clocksource tsc torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK <--- (new test) torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_replace:OK torvalds#269 tc_opts_revision:OK Summary: 18/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] (cherry picked from commit d1a783d) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit f9b0879 Add a new test case which performs double query of the bpf_mprog through libbpf API, but also via raw bpf(2) syscall. This is testing to gather first the count and then in a subsequent probe the full information with the program array without clearing passed structs in between. # ./vmtest.sh -- ./test_progs -t tc_opts [...] ./test_progs -t tc_opts [ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz [ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns [ 1.402734] clocksource: Switched to clocksource tsc [ 1.426639] bpf_testmod: loading out-of-tree module taints kernel. [ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK <--- (new test) torvalds#269 tc_opts_replace:OK torvalds#270 tc_opts_revision:OK Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]> (cherry picked from commit f9b0879) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit 685446b Add a new test case to query on an empty bpf_mprog and pass the revision directly into expected_revision for attachment to assert that this does succeed. ./test_progs -t tc_opts [ 1.406778] tsc: Refined TSC clocksource calibration: 3407.990 MHz [ 1.408863] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcaf6eb0, max_idle_ns: 440795321766 ns [ 1.412419] clocksource: Switched to clocksource tsc [ 1.428671] bpf_testmod: loading out-of-tree module taints kernel. [ 1.430260] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK <--- (new test) torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]> (cherry picked from commit 685446b) Signed-off-by: Jonathan Maple <[email protected]>

jira LE-1907 Rebuild_History Non-Buildable kernel-5.14.0-427.18.1.el9_4 commit-author Daniel Borkmann <[email protected]> commit 2451630 Add several new test cases which assert corner cases on the mprog query mechanism, for example, around passing in a too small or a larger array than the current count. ./test_progs -t tc_opts torvalds#252 tc_opts_after:OK torvalds#253 tc_opts_append:OK torvalds#254 tc_opts_basic:OK torvalds#255 tc_opts_before:OK torvalds#256 tc_opts_chain_classic:OK torvalds#257 tc_opts_chain_mixed:OK torvalds#258 tc_opts_delete_empty:OK torvalds#259 tc_opts_demixed:OK torvalds#260 tc_opts_detach:OK torvalds#261 tc_opts_detach_after:OK torvalds#262 tc_opts_detach_before:OK torvalds#263 tc_opts_dev_cleanup:OK torvalds#264 tc_opts_invalid:OK torvalds#265 tc_opts_max:OK torvalds#266 tc_opts_mixed:OK torvalds#267 tc_opts_prepend:OK torvalds#268 tc_opts_query:OK torvalds#269 tc_opts_query_attach:OK torvalds#270 tc_opts_replace:OK torvalds#271 tc_opts_revision:OK Summary: 20/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Alan Maguire <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] (cherry picked from commit 2451630) Signed-off-by: Jonathan Maple <[email protected]>

torvalds#258) ftlcdc100 uses GFP_DMA as the gfp flag, which causes the dma_direct_alloc() mechanism to assume that a DMA buffer should be allocated from a DMA pool. However, since ftlcdc100 does not configure a DMA pool, the gfp flag should be changed to GFP_KERNEL, allowing the kernel to allocate the DMA buffer properly. Error Message: [ 0.200804] Failed to get suitable pool for e0200000.lcd [ 0.210992] WARNING: CPU: 0 PID: 1 at kernel/dma/pool.c:279 dma_alloc_from_pool+0x180/0x1a4 [ 0.211447] Modules linked in: [ 0.211564] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.49-00161-g96b0cb3c37c6 #2 [ 0.211642] Hardware name: andestech,ax45 (DT) [ 0.211705] epc : dma_alloc_from_pool+0x180/0x1a4 [ 0.211737] ra : dma_alloc_from_pool+0x180/0x1a4 [ 0.211752] epc : ffffffff800a5310 ra : ffffffff800a5310 sp : ffffffc80000ba30 [ 0.211764] gp : ffffffff812c4810 tp : ffffffd8004b0000 t0 : 0000000000009510 [ 0.211775] t1 : 000000000000b67e t2 : 000000000000003f s0 : ffffffc80000bab0 [ 0.211786] s1 : 0000000000000000 a0 : ffffffd87e3e7ac0 a1 : ffffffd8004b0000 [ 0.211797] a2 : 0000000000000002 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.211807] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000001 [ 0.211818] s2 : ffffffd800521b50 s3 : 0000000000000000 s4 : 0000000000080000 [ 0.211833] s5 : ffffffff81192508 s6 : ffffffff81192510 s7 : ffffffff800a2494 [ 0.211844] s8 : 0000000000000038 s9 : ffffffff81192460 s10: ffffffff812c5bc0 [ 0.211855] s11: ffffffff812c5680 t3 : 00000000000001e9 t4 : 00000000d2a81d91 [ 0.211865] t5 : 0000000000000000 t6 : 00000000024b78f9 [ 0.211875] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 sdcause: 0000000000000000 [ 0.211906] The detailed trap cause: sdcause does not support this exception [ 0.211975] [<ffffffff800a5310>] dma_alloc_from_pool+0x180/0x1a4 [ 0.212044] [<ffffffff800a28d4>] dma_direct_alloc+0x114/0x374 [ 0.212055] [<ffffffff800a191e>] dma_alloc_attrs+0x76/0x9c [ 0.212064] [<ffffffff803ea702>] faradayfb_probe+0x59a/0x78c [ 0.212073] [<ffffffff804432a2>] platform_probe+0x56/0xb0 [ 0.212082] [<ffffffff80440bd0>] really_probe+0xe4/0x25c [ 0.212092] [<ffffffff80440e00>] __driver_probe_device+0xb8/0xfc [ 0.212101] [<ffffffff804410b0>] driver_probe_device+0x30/0x9c [ 0.212110] [<ffffffff804412a6>] __driver_attach+0xe2/0x120 [ 0.212119] [<ffffffff8043eaf0>] bus_for_each_dev+0x5c/0xc0 [ 0.212128] [<ffffffff80440622>] driver_attach+0x1e/0x28 [ 0.212137] [<ffffffff8043fe76>] bus_add_driver+0xc2/0x204 [ 0.212146] [<ffffffff80441d76>] driver_register+0x96/0xdc [ 0.212155] [<ffffffff80442ffe>] __platform_driver_register+0x22/0x2c [ 0.212174] [<ffffffff8072adc6>] atflcd_of_driver_init+0x1a/0x24 [ 0.212192] [<ffffffff8000216a>] do_one_initcall+0x8a/0x1bc [ 0.212201] [<ffffffff8070e12a>] kernel_init_freeable+0x1b2/0x21c [ 0.212210] [<ffffffff807047c6>] kernel_init+0x22/0x11c [ 0.212218] [<ffffffff8070d07a>] ret_from_fork+0xe/0x20 [ 0.212282] ---[ end trace 0000000000000000 ]--- [ 0.212459] faraday-lcd e0200000.lcd: Failed to map video memory [ 0.250772] faraday-lcd: probe of e0200000.lcd failed with error -12 Reviewed-on: https://gitea.andestech.com/RD-SW/linux/pulls/258 Signed-off-by: Charles Wu <[email protected]>

…orvalds#258) Reviewed-on: https://gitea.andestech.com/RD-SW/linux/pulls/258 Signed-off-by: Charles Wu <[email protected]>

…ature (torvalds#258) To reduce branch usage, this commit adds two static keys, andes_pfn_msb_key and andes_ppma to control the enabling/disabling of the uncache configuration methods. Currently, there are three ways to configure uncacheable memory on Andes RISC-V CPUs. 1. RISC-V extension Svpbmt: - Enable Svpbmt by adding 'svpbmt' to the CPU ISA string in the device tree. 2. Programmable physical memory attributes (PPMA): - Configure via SBI call. 3. Physical address maximum significant bit (MSB): - Set by writing to the most significant bit of the physical address. During the RISCV_ALTERNATIVES_EARLY_BOOT phase, errata_support_uncache() determines which method for setting uncacheable memory, following the order of Svpbmt > PPMA > MSB. Reviewed-on: https://gitea.andestech.com/RD-SW/linux/pulls/258 Signed-off-by: Charles Wu <[email protected]>

…ce.i in switch_to (torvalds#258) Commit 01261e2 ("riscv: Only flush the mm icache when setting an exec pte") reduced `sbi_remote_fence_i()` calls by changing `flush_icache_pte()` from `flush_icache_all()` to `flush_icache_mm()`. This change altered IPI behavior for instruction cache flushing: 1. IPIs are now only sent to cores currently running the affected MM. 2. A deferred instruction cache flush mask is added for other harts in the same MM. These harts execute `fence.i` when context switching to this MM. This optimization introduced a regression on Andes 2X-series multi-core CPUs during LTP testing (bugzilla #33944). Reverting the change for these CPUs (as seen in 62f0764) resolved the issue. To fix this BUG while retaining the benefit of reduced `sbi_remote_fence_i()` calls, this commit ensures `fence.i` is executed during `switch_to()` for Andes 2X-series multi-core CPUs. Fixes: 01261e2 ("riscv: Only flush the mm icache when setting an exec pte") Link: http://e-andes.andestech.com/bugzilla5/show_bug.cgi?id=33944 Reviewed-on: https://gitea.andestech.com/RD-SW/linux/pulls/258 Signed-off-by: Charles Wu <[email protected]>

added support for goobay Active USB 3.0 Data Link Cable (Prolific PL-…

9742a7d

…27A1 chipset)

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#258 from liuyuan10/memfix

487de9a

Fix boot mem size and lkl_set_fd_limit

danielkucera closed this Jan 23, 2019

RadxaStephen added a commit to RadxaStephen/linux that referenced this pull request Mar 6, 2024

Merge pull request torvalds#258 from vamrs-feng/linux-5.10-gen-rkr4.1

fbc9c31

arm64: dts: cm3 io: Modify the default power LED Status

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

added support for goobay Active USB 3.0 Data Link Cable #258

added support for goobay Active USB 3.0 Data Link Cable #258

Uh oh!

danielkucera commented Feb 21, 2016

Uh oh!

avertis commented Jan 2, 2017 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

added support for goobay Active USB 3.0 Data Link Cable #258

added support for goobay Active USB 3.0 Data Link Cable #258

Uh oh!

Conversation

danielkucera commented Feb 21, 2016

Uh oh!

avertis commented Jan 2, 2017 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants

avertis commented Jan 2, 2017 •

edited

Loading