In the sidebar, under Scheduling, select Event Types to open the events list.
The events list
All event types share a single list. The table groups events by type and shows a Favorites group at the top. The table shows each event’s name, Status, Duration, Last edited, Last used, Pre buffer, Post buffer, and Intervals. Select a column header to sort by it.- The Status switch turns an event on or off without opening it. Turning an event off shows an Event deactivated toast with an Undo action.
- Hover over an event’s name for a Booking links button (see Booking links).
- If you host the event, your own booking link shows below the event name. Select it to copy the link.
- Each row’s menu has Duplicate and Delete. Deleting stops the event’s booking links, so Default asks you to confirm.
- If workflows use the event, Default lists the workflows that you must update before you can delete the event.
- The toolbar has a Search events box and filters for Status and Duration.
Create an event
1
Open the dialog
Select Create new event.
2
Name the event
Enter an Event name. The name is required.
3
Choose the event type
Choose the event type for the meeting.
4
Create the event
Select Create new event again. Default creates the event.


Any member can create a Quick event. Team events require permission to create shared
events.
If you cannot select Team event, ask an admin for Scheduling event access.
After you create the event, Default opens the event editor. Work through its setting sections
from top to bottom.
The live preview on the right updates as you go. The editor header shows Unsaved changes
until you select Save, then Published.
In a narrow window the preview and the sections take turns. The Editor and Preview switch
under the header picks which one shows, and switching keeps what you typed.
If someone else edits the same event while you have it open, Default asks whether to
Keep my edits or Refresh.

The event editor: setting sections on the left, a live booking-page preview on the right.
Event details
Use Event Details to control the public booking page basics.
The Location setting decides where the meeting happens. Choose your calendar’s default
conferencing, Zoom, Zoom Personal, In Person, or Phone call. Phone call books a regular calendar
invite with no video link. Picking In Person reveals Ignore OOO, which lets people book over
your out-of-office time while other meetings still block.

The Location menu: Calendar Default, Zoom, Zoom Personal, In Person, or Phone call.
Conferencing options depend on connected integrations. Calendar Default uses the host’s calendar
provider settings, and Zoom options require a connected Zoom integration.
Hosts and attendees
Use Hosts and Attendees to decide who runs the meeting and who else can join.
Scheduling and availability
Use Scheduling and Availability to control when people can book and which hours are available.
Scheduling settings
The Scheduling Settings tab controls booking windows, buffers, notice, and slot increments.
A buffer belongs to the meeting being booked: a time is offered only when the pre-meeting buffer
before it and the post-meeting buffer after it are clear on every required host’s calendar.
Event availability
By default, the event uses each host’s working hours from their availability settings. Turn on Set custom hours to override that schedule for this event. A host is then bookable for the whole of the custom hours, also outside their own working hours. Their calendar, time off and the event’s scheduling period still apply.
Booking form questions
Use Booking Form Questions to decide what the booker must answer before confirming a meeting. Default adds the Email question automatically. Email is always required to process an event booking.
Questions can collect email, phone, URL, number, text, textarea, single-select, and
multi-select answers. The answer type depends on the field you choose.
Drag questions to reorder them.
Phone collection for leads
Use a Phone Number question to collect a lead phone number during booking. The number is saved on the lead’s record, and a message can use it asguest.phone_number. Default does not text
leads: meeting messages go out by email or Slack, so the booking form shows no text-message
consent.
Messages
Use Messages to set the calendar invite for this event’s meetings. The messages Default sends around a meeting, the booking confirmation, the cancel, reschedule, and no-show notices, and the reminders, come from the event’s Sequence section instead.Calendar invite
Set the Calendar event title and Calendar event description. Default uses these values on the calendar event that it creates after booking. The values can differ from the public booking page title and description. Both fields support scheduling variables, grouped as Guest variables, Host variables, and Meeting variables.Where guest variables get their values
Guest variables fill from more than 1 source. Default prefers the data it already holds over what the guest types at booking, because your CRM and enrichment data are usually more accurate. The Person record combines CRM data, enrichment data, and earlier form submissions. Form answers reach these variables through that record.Host and meeting variables
Host variables (Host first name, Host last name, Host full name, Host display name, and Host email) fill from the profile of the meeting’s primary host. Host full name is the host’s first and last name. Host display name is the display name on the host’s profile, or the full name when the profile has no display name. Meeting variables fill from the event itself. Meeting title uses the Event title from Event Details, or the event’s name when the title is empty. Meeting description uses the Description from Event Details, converted to plain text. When a variable is blank lists every variable the title and description use and lets you decide, per variable, what the invite shows when that variable has no value at booking time:- Use the fallback copy replaces the whole field that contains the variable. Turn on Fallback title and description and set the Fallback title and Fallback description the invite should show instead. The title and description are evaluated separately, so a blank variable in the description never replaces a title whose variables all resolved.
- Remove the line drops the description line that holds the variable, so a label such as “Meeting Description:” does not survive on its own. A line is a paragraph, or one Shift+Enter line inside a paragraph. The title is one line, so there the variable is left empty instead.
- Leave it empty renders the variable as empty text and keeps the rest of the field as written.
- Use another attribute tries up to three other variables in order and uses the first one with a value. When every attribute is blank, the chain ends by removing the line or leaving the variable empty, whichever you pick.
Sequence
The Sequence section of the event’s Messages view shows the messages this event sends around its meetings, to guests and to hosts: the booking confirmation, the cancel, reschedule, and no-show notices, and the reminders. An event follows a workspace sequence or keeps its own copy.- Choose a sequence links the event to a published workspace sequence. Workspace default puts it back on the sequence new events get, and Remove takes the event off its sequence. An event without a linked sequence also offers Send no messages, even when no published sequence is available. These choices apply when you save the event. Picking one shows what it will do under the picker and marks the event Unsaved changes, and the Save button at the top applies it together with your other changes. Undo sequence change takes the pick back before then. Only bookings made after the save use the new sequence; meetings already booked keep the messages they were booked with. While a pick waits, the section’s messages are read-only.
- Customize the sequence to give this event its own copy, then edit the copy’s messages here without changing the workspace sequence. Restore it to follow the workspace sequence again. Customize and Restore take effect at once, and so does the section’s own Save for message edits, which is separate from the event’s Save.
- Removing a message or turning off Send this message stops that message for new bookings. Neither action sends another message in its place. Existing bookings keep their saved messages. An event’s copy, like any sequence, needs at least one message to save; to send nothing, use Remove (or Send no messages when no sequence is linked).
- Remove makes the event send no sequence messages for new bookings until you choose a sequence again. If the event has its own copy, confirmation explains that saving discards the copy.
- Admins can select New sequence here to create and publish a workspace sequence with a starter booking message. The event follows it only after you select the event’s Save. Undo sequence change cancels the pending link but leaves the new sequence available in Settings.
- An admin can edit and publish a non-default workspace sequence here when this is the only event following it. Changes to a shared sequence or the workspace default belong in Settings; use Customize for this event to change only this event instead.
- Settings > Sequences is the admin-only workspace editor for drafts and publishing. See Sequences and Reminders and no-shows.
Scheduler settings
Use Scheduler Settings, the last section of the editor, to control how the scheduler looks and behaves wherever the event appears.Booking links
Booking links open in a Booking links drawer. Open it from the Booking links button on an event row, or from Copy Link in the event editor’s header.View and copy links
The drawer lists the event’s links in 2 tabs:- Permanent links keep working until you delete them.
- Expiring links stop working on their expiration date. The list shows when each link expires.
Revoked links
Revoking a link stops it from accepting bookings. Revoked links are hidden from the lists by default. If you can manage booking links, select Show revoked links under the tabs to list them with the active ones, and Hide revoked links to put them away again. A revoked link appears under the tab for its kind, Permanent or Expiring. A revoked link cannot be copied, edited, or revoked again. You can only delete it. Revoking a link keeps its custom slug reserved. To use that slug on a new link, delete the revoked link first: deleting frees the slug. If you try to reuse a slug that a revoked link still holds, the form tells you to show revoked links and delete it.Create a booking link
1
Open the form
Select New in the drawer header. The drawer shows the New booking link form.
2
Set the expiration
Choose Permanent or Expiring. For an expiring link, pick the expiration date.
3
Choose the hosts
Add the members or queues that host meetings booked through the link.
4
Name the link
Enter a Link name. Optionally, set a Custom slug for the link URL.
5
Set the visibility
Choose Shared or Private.
6
Copy the link
Select Copy link. Default creates the link if needed and copies it to your
clipboard. If the event already has a link with the same hosts, slug, name, visibility, and
expiration day, Default copies that link instead of creating another.
email, first_name, or last_name to the
link, for example ?email=ada@acme.com, and the matching booking question opens with that answer.
The guest can change it before they book. URL-encode the value, so a + in an email is written
as %2B. Default removes these three from the address bar once the page loads, so reloading the
page opens a blank form.