Input types

Overview

Input types are structured objects passed as arguments to queries. For example, MetricsFilterInput lets you specify a time range and aggregation interval when querying metrics.

ActiveClientsInput

Input type for specifying options when querying active clients metrics.

Field	Type	Description
`includeMeterHardware`	Boolean	Whether to include Meter hardware in the metrics calculation.

AddNetworkToAutoVPNGroupInput

Input type for adding a network to an AutoVPN group.

Field	Type	Description
`networkUUID`	UUID!	Unique identifier of the network to add as a member.
`permittedVLANUUIDs`	[UUID!]	List of permitted VLAN unique identifiers. The associated VLANs must have participatesInVPNs set to true.
`phyInterfaceUUID`	UUID!	Unique identifier of the physical interface used by the member's uplink.

AllClientMetricsTimeseriesFilterInput

Input type for specifying filters when querying all client metrics timeseries data.

Field	Type	Description
`timeFilter`	MetricsFilterInput!	Specify the time range for the timeseries data.

BoolFilter

Field	Type	Description
`key`	String!	The key for the filter.
`value`	Boolean!	Boolean value for the filter.

CaptivePortalEntryFilterInput

Field	Type	Description
`ipAddress`	IP	Filter captive portal entries by IP address.
`limit`	Int!	The maximum number of captive portal entries to return.
`macAddress`	MacAddress	Filter captive portal entries by MAC address.
`maxCreatedAt`	DateTime	Only include captive portal entries that were created before or at this date and time.
`minCreatedAt`	DateTime	Only include captive portal entries that were created at or after this date and time.
`offset`	Int!	The number of captive portal entries to skip before starting to collect the result set.

ChannelUtilizationTimeseriesFilterInput

Field	Type	Description
`timeFilter`	MetricsFilterInput!	Specify the time range for the timeseries data.

ClientMetricsTimeseriesFilterInput

Input type for specifying filters when querying client metrics timeseries data.

Field	Type	Description
`bands`	[RadioBand!]	Specifying this field returns only metrics observed for the given radio band(s).
`channels`	[Int!]	Specifying this field returns only metrics observed for the given radio channel(s).
`clientMacAddresses`	[MacAddress!]	Filter events by client MAC address.
`eventTypes`	[WirelessClientConnectionEventType!]	Filter events by event type(s).
`excludeObservers`	Boolean	If true, exclude events from Observers.
`identity8021X`	String	Filter events whose 802.1X identity contains the given string (case-insensitive).
`isNACEvent`	Boolean	Filter events by whether they are NAC events. `true` returns only NAC events, `false` returns only non-NAC events, and omitting the field returns both.
`partialClientMacAddresses`	[String!]	Filter events by partial client MAC address.
`reasonCodes`	[Int!]	Filter events by 802.11 reason code(s).
`rssi`	NumberRangeInput	Filter events by RSSI.
`ssidUUIDs`	[UUID!]	Specifying this field returns only metrics observed for the given SSID(s), by UUID.
`timeFilter`	MetricsFilterInput!	Specify the time range for the timeseries data.
`virtualDeviceUUIDs`	[UUID!]	Filter events by virtual device.

CompanyNetworksFilterInput

Filters the list of networks for a single company

Field	Type	Description
`networkUUIDs`	[UUID!]	Filter networks using their UUIDs.

CreateApplicationDNSFirewallRuleInput

Field	Type	Description
`action`	FirewallRuleAction!	The action to take when the rule is matched.
`applicationID`	Int	The ID of the Netstar application to associate with the rule.
`boundDHCPRuleUUIDs`	[UUID!]!	List of UUIDs of DHCP rules to which the application DNS firewall rule is bound.
`categoryID`	Int	The ID of the Netstar category to associate with the rule.
`domain`	String	The domain or FQDN that is matched by the rule, allowing for wildcards denoted by '*'.
`groupID`	Int	The ID of the Netstar group to associate with the rule.
`isEnabled`	Boolean!	Indicates whether the rule is enabled; defaults to true.
`name`	String!	The name of the DNS firewall rule.
`priority`	Int	The priority of the rule; if not provided, will default to 1 greater than the highest existing priority.

CreateClientVPNClientInput

Input parameters for creating a Client VPN client.

Field	Type	Description
`email`	String!	End user's company email associated with the VPN server's controller.
`isEnabled`	Boolean!	Whether the client is enabled. If false, users will not be able to connect using this client's key.
`name`	String!	End user's device name, e.g., 'paulmbp'.
`publicKey`	String!	A Curve25519 public key generated by the end user using WireGuard.

CreateFirewallRuleInput

Input type for creating a new firewall rule.

Field	Type	Description
`action`	FirewallRuleAction!	The action to take when the firewall rule matches (e.g., DENY or PERMIT).
`boundPhyInterfaceUUIDs`	[UUID!]!	List of UUIDs of physical interfaces to which the firewall rule is bound. The physical interfaces must be uplinks.
`boundVLANUUIDs`	[UUID!]!	List of UUIDs of VLANs to which the firewall rule is bound.
`description`	String	A description of the firewall rule.
`dstPortRanges`	[PortRangeInput!]	List of destination port ranges to match traffic to.
`dstPrefixes`	[IPPrefix!]	Destination IP prefixes to match traffic to.
`dstVLANUUID`	UUID	UUID of the destination VLAN to match traffic to.
`isEnabled`	Boolean!	Indicates if the firewall rule is currently enabled.
`name`	String!	The name of the firewall rule.
`priority`	Int	Priority of the rule within the network, lower priority rules are applied first. If there is an existing rule with the provided value, it and all subsequent occupied values will be incremented. If omitted, next lowest priority in network will be used.
`protocols`	[IPProtocol!]	List of IP protocols to match.
`srcPortRanges`	[PortRangeInput!]	List of source port ranges to match traffic from.
`srcPrefixes`	[IPPrefix!]	Source IP prefixes to match traffic from.
`tags`	[String!]	List of tags associated with the firewall rule.

CreateIDSIPSConfigInput

Field	Type	Description
`enabledVLANUUIDs`	[UUID!]!	VLANs to enable IDS/IPS for.
`ipsRuleDuration`	Duration	How long rules generated by IPS stay valid.
`isEastWestProtectionEnabled`	Boolean!	If east-west protection is enabled.
`minIPSSeverity`	Int	The IPS minimum severity to act on.
`minSeverity`	Int!	The IDS minimum severity to act on.
`mode`	IDSIPSMode!	The mode IDS/IPS should act in.
`safelist`	[IPPrefix!]	List of subnets that should never be blocked.

CreateIDSIPSCustomRuleInput

A custom intrusion rule definition for IDS/IPS. These currently apply tls.sni rules.

Field	Type	Description
`action`	FirewallRuleAction!	The action this rule applies.
`applicationID`	Int	The ID of the Netstar application to associate with the rule.
`boundVLANUUIDs`	[UUID!]!	List of UUIDs of VLANs to which the rule is bound.
`domain`	String	The FQDN this rule applies to.
`isEnabled`	Boolean!	If this rule is enabled.
`name`	String!	A name to identify this rule.

CreateSSIDInput

Field	Type	Description
`description`	String	Description of the SSID.
`encryptionProtocol`	SSIDEncryptionProtocol	Encryption protocol used by the SSID.
`isBand2GAllowed`	Boolean!	Enable or disable broadcasting the SSID on the 2.4 GHz band.
`isBand5GAllowed`	Boolean!	Enable or disable broadcasting the SSID on the 5 GHz band.
`isBand6GAllowed`	Boolean!	Enable or disable broadcasting the SSID on the 6 GHz band.
`isEnabled`	Boolean!	Enable or disable the SSID.
`isEnabledForAllAccessPoints`	Boolean!	Enable the SSID for all access points or only specified ones.
`isGuest`	Boolean!	Mark the SSID as a guest network.
`isHidden`	Boolean!	Hide the SSID from being broadcasted.
`isIsolateClientsEnabled`	Boolean!	Enable client isolation on the SSID.
`password`	String	Pre-shared key (PSK) for the SSID.
`passwordRotationCadence`	SSIDPasswordRotationCadence	Cadence for automatic password rotation.
`passwordRotationDayOfMonthLocal`	Int	The day of the month for password rotation in the network's local time zone.
`passwordRotationDayOfWeekLocal`	Int	The day of the week for password rotation in the network's local time zone (0 = Sunday).
`passwordRotationHourOfDayLocal`	Int	The hour of the day for password rotation in the network's local time zone.
`ssid`	String!	Name of the SSID.
`vlanUUID`	UUID	UUID of the VLAN to associate with the SSID.

CreateServiceNowCaseIntegrationDataInput

Input for creating a service now case integration

Field	Type	Description
`entityType`	ServiceNowEntityType!	Type of service now object associated with this case.

CreateSupportAssignmentGroupInput

Input to create a support assignment group.

Field	Type	Description
`isDefault`	Boolean	Whether this is the default assignment group for the company.
`name`	String!	Name of the assignment group.

CreateSupportCaseAttachmentsInput

Represents the input for creating a support case attachment

Field	Type	Description
`fileName`	String	Name of the file.

CreateSupportCaseCommentInput

Represents the input for creating a support case comment

Field	Type	Description
`attachments`	[CreateSupportCaseAttachmentsInput!]	Attachments input.
`author`	SupportCaseContactInput	The author of the comment. Defaults to the authenticated user or the Meter API key owner.
`body`	String!	Comment body.
`externalID`	String	Client-supplied external identifier for the comment.

CreateSupportCaseInput

Field	Type	Description
`assignedTo`	SupportCaseContactInput	Assignee contact for the case.
`caseIntegrations`	[CreateSupportCaseIntegrationInput!]	Integration data about the case.
`closeCode`	SupportCaseCloseCode	The close code for the support case.
`closeNotes`	String	The closing notes for the support case.
`companyUUID`	UUID!	UUID of the company experiencing the issue.
`contacts`	[SupportCaseContactInput!]	Contacts associated with the case.
`customer`	SupportCaseContactInput	Customer contact for the case.
`description`	String!	Description of the case.
`externalID`	String	Client-supplied external identifier for the case.
`initialComments`	[CreateSupportCaseCommentInput!]	Comments to leave on case creation, created in order.
`issueLocation`	String	Location of the issue.
`issueType`	IssueType!	More refined type for the issue.
`macAddress`	String	MAC address of the device experiencing the issue.
`networkUUID`	UUID	UUID of the network experiencing the issue.
`origin`	SupportCaseOrigin!	Origin of the case.
`parentSupportCaseUUID`	UUID	Parent support case for the case.
`priority`	SupportCasePriority!	Priority of the case. Low, Medium, or High.
`remoteAssignmentGroupUUID`	UUID	Remote assignment groups working the case.
`requester`	SupportCaseContactInput	Requester contact for the case.
`resolvedBy`	SupportCaseContactInput	Person who resolved the case.
`subject`	String!	Subject of the case.
`type`	TechnologyType!	Type of the technology affected, such as Wired, Wireless, Wired and Wireless, Dashboard, or Unsure.

CreateSupportCaseIntegrationInput

Input for creating a support case integration. Exactly one provider-specific variant must be set.

Field	Type	Description
`serviceNow`	CreateServiceNowCaseIntegrationDataInput	ServiceNow-specific case integration data.

CreateVLANInput

Field	Type	Description
`description`	String	An optional description of the VLAN.
`ipV4ClientAssignmentProtocol`	ClientAssignmentProtocol	Specifies the protocol for assigning IPv4 addresses to clients on this VLAN.
`ipV4ClientGateway`	IPV4	Specifies the IPv4 gateway address for this VLAN.
`ipV4ClientPrefixLength`	Int	Specifies the IPv4 prefix length (subnet mask) for this VLAN.
`ipV6ClientAssignmentProtocol`	ClientAssignmentProtocol	Specifies the protocol for assigning IPv6 addresses to clients on this VLAN.
`ipV6ClientGateway`	IPV6	Specifies the IPv6 gateway address for this VLAN.
`ipV6ClientPrefixLength`	Int	Specifies the IPv6 prefix length (subnet mask) for this VLAN.
`isEnabled`	Boolean!	If true, the VLAN is enabled upon creation.
`name`	String!	A human-friendly name to identify the VLAN.
`vlanID`	Int	The VLAN ID. Must be between 1 and 4094 and is unique per network. If not provided, the lowest available ID for the network will be selected.

DateRangeFilter

Date range filter implementation.

Field	Type	Description
`end`	DateTime	End of date range for the filter.
`key`	String!	The key for the filter.
`start`	DateTime	Start of date range for the filter.

DevicesForNetworkFilter

Filter criteria for devices in a network.

Field	Type	Description
`deviceType`	VirtualDeviceType	Filter devices by virtual device type.
`deviceTypes`	[VirtualDeviceType!]	Filter devices by any of the given device types.
`isDraft`	Boolean	Filter devices by their draft state.
`virtualDeviceUUIDs`	[UUID!]	If provided, only return virtual devices with these UUIDs. An empty list returns no devices.

FilterInput

Filter type shared across all queries.

Field	Type	Description
`bool`	BoolFilter	Bool filter.
`dateRange`	DateRangeFilter	Date range filter.
`multiSelect`	MultiSelectFilter	Multi select filter.
`number`	NumberFilter	Number filter.
`numberRange`	NumberRangeFilter	Number range filter.
`select`	SelectFilter	Select filter.
`text`	TextFilter	Text filter.

GetSupportCasesInput

Get support cases input

Field	Type	Description
`companyUUID`	UUID	Company UUID to get support cases for, required for the API.
`filters`	[FilterInput!]!	Filters to apply when fetching the page.
`page`	PageInput!	Page location to load from.
`sort`	SortOrderInput	Sort by order for the support cases.

HardwareDevicesFilter

Filters the response when fetching multiple hardware devices.

Field	Type	Description
`deviceModel`	DeviceModel	Filter hardware devices by device model.
`deviceType`	DeviceType	Filter hardware devices by device type.
`limit`	Int	The maximum number of hardware devices to return. Default is 200.
`offset`	Int	The offset from where to start returning hardware devices.

HardwareDevicesForNetworkFilter

Filter criteria for devices in a network.

Field	Type	Description
`deviceType`	DeviceType	Filter devices by virtual device type.

IDSEventFilterInput

Field	Type	Description
`SID`	Int	Find events by signature ID.
`action`	IDSEventAlertAction	Find events based on action.
`appProtocol`	String	Find events based on application layer protocol.
`classType`	String	Find events by rule class type shortname.
`direction`	IDSEventDirection	Find events based on direction.
`dstIP`	IP	Find events based on destination IP.
`dstMAC`	MacAddress	Find events based on destination MAC address.
`dstPort`	PortRangeInput	Find events based on destination port.
`protocol`	IDSEventProtocol	Find events based on protocol.
`search`	IDSEventFilterSearchInput	Input for non-exact search against rule fields.
`srcIP`	IP	Find events based on source IP.
`srcMAC`	MacAddress	Find events based on source MAC address.
`srcPort`	PortRangeInput	Find events based on source port.

IDSEventFilterSearchInput

Field	Type	Description
`description`	String	Match events whose rule description contains this substring.

IDSIPSConfigCategoryBindingInput

Field	Type	Description
`categoryUUID`	UUID!	Unique identifier of the IDS/IPS category.
`mode`	IDSIPSMode!	The mode of this binding, whether it applies to IDS or IPS.

IDSIPSConfigCategorySuppressionInput

Field	Type	Description
`categoryUUID`	UUID!	Unique identifier of the IDS category.
`description`	String	An optional informational description for the suppression.
`direction`	IDSIPSSuppressedRuleDirection	The traffic direction to consider when determining IP prefix application. Required if `ipPrefixes` is set.
`ipPrefixes`	[IPPrefix!]	The IP prefixes that this suppression should apply to. If set, `direction` is required.
`mode`	IDSIPSMode!	The mode of this suppression, whether it applies to IDS or IPS.

IDSIPSConfigRuleBindingInput

Field	Type	Description
`mode`	IDSIPSMode!	The mode of this binding, whether it applies to IDS or IPS.
`ruleSID`	Int!	Unique signature ID of the IDS rule.

IDSIPSConfigRuleSuppressionInput

Field	Type	Description
`description`	String	An optional informational description for the suppression.
`direction`	IDSIPSSuppressedRuleDirection	The traffic direction to consider when determining IP prefix application. Required if `ipPrefixes` is set.
`ipPrefixes`	[IPPrefix!]	The IP prefixes that this suppression should apply to. If set, `direction` is required.
`mode`	IDSIPSMode!	The mode of this suppression, whether it applies to IDS or IPS.
`ruleSID`	Int!	Unique signature ID of the IDS rule.

IDSRuleFilterInput

Field	Type	Description
`SID`	Int	Find rules by signature ID.
`action`	String	Find based on action for this rule.
`classType`	String	Find rules by class type shortname.
`groupID`	Int	Find rules by group ID.
`revision`	Int	Find rules by revision.
`search`	IDSRuleFilterSearchInput	Input for non-exact search against rule fields.

IDSRuleFilterSearchInput

Filter IDS rules based on substring search.

Field	Type	Description
`description`	String	Search based on description for this rule.
`header`	String	Search based on header for this rule.

IPRangeInput

A range of IP addresses.

Field	Type	Description
`end`	IP!	The upper address in the IP range.
`start`	IP!	The lower address in the IP range.

MetricsFilterInput

Field	Type	Description
`durationSeconds`	Int!	The total duration in seconds for which to retrieve metrics data. Maximum set to 1 year.
`endTime`	DateTime	If not provided, endTime defaults to now.
`stepSeconds`	Int!	The interval in seconds between data points in the metrics response.

MultiSelectFilter

Multiselect filter implementation.

Field	Type	Description
`key`	String!	The key for the filter.
`values`	[String!]!	Selected values for the filter.

NetworkClientsFilter

Field	Type	Description
`apSerialNumber`	String	If provided, the latest connected clients for a network are returned that were reported to be connected to the given AP serial number. At most one of `macAddress`, `apSerialNumber`, `vlanID`, or `ssid` can be provided.
`excludeMeterHardware`	Boolean!	If true, clients identified as Meter hardware devices will be excluded from the results.
`includeLatency`	Boolean!	If provided, then the ping latency from controller to client is included in the response.
`includeThroughput`	Boolean!	If provided, the average usage for all returned clients in the last 30 minutes will be included in the response. If macAddress is provided this field has no effect.
`ipRange`	IPRangeInput	If provided, returns clients with IP addresses within the provided range.
`lookbackMinutes`	Int!	When no macAddress and apSerialNumber are provided, filters resulting clients' lastSeen to this many minutes before now.
`macAddress`	MacAddress	If a MAC address is provided, this will get the history of clients with this MAC address. At most one of `macAddress`, `apSerialNumber`, `vlanID`, or `ssid` can be provided.
`ssid`	String	If provided, the latest connected clients for a network are returned that were reported to be connected to the given SSID. Only supported on networks running a firewall. At most one of `macAddress`, `apSerialNumber`, `vlanID`, or `ssid` can be provided.
`timestamp`	DateTime	If provided, then returns the results that were observed at the given timestamp. If null, defaults to now.
`vlanID`	Int	If provided, the latest connected clients for a network are returned that were reported to be connected to the given VLAN. Only supported on networks running a firewall. At most one of `macAddress`, `apSerialNumber`, `vlanID`, or `ssid` can be provided.

NetworkThreatsFilterInput

Field	Type	Description
`timeFilter`	MetricsFilterInput!	Specify the time range for data.

NumberFilter

Number filter implementation.

Field	Type	Description
`key`	String!	The key for the filter.
`value`	Float!	Number value for the filter.

NumberRangeFilter

Number range filter implementation.

Field	Type	Description
`end`	Float	End of number range for the filter.
`key`	String!	The key for the filter.
`start`	Float	Start of number range for the filter.

NumberRangeInput

A number range input type.

Field	Type	Description
`max`	Int	The maximum value
`min`	Int	The minimum value

PageInput

Pagination input shared across all paginated queries.

Field	Type	Description
`asOf`	DateTime	Time pagination began
`limit`	Int!	Max items to return (server may cap).
`page`	Int	Page to jump to.

PortRangeInput

Input type for specifying a port range.

Field	Type	Description
`lower`	Int!	Lower bound of the port range (1-65535).
`upper`	Int!	Upper bound of the port range (1-65535).

SSIDFilterInput

Field	Type	Description
`isGuest`	Boolean	The guest status to filter by.
`isHidden`	Boolean	The hidden status to filter by.
`ssid`	String	The SSID to filter by.

SelectFilter

Select filter implementation.

Field	Type	Description
`key`	String!	The key for the filter.
`value`	String!	Selected value for the filter.

SortOrderInput

Sort order to apply to a list of results.

Field	Type	Description
`fieldName`	String!	Field to sort by.
`order`	SortOrder!	Order of the sort.

SupportCaseContactInput

Input for getting or creating a support case contact by email.

Field	Type	Description
`email`	String!	Email of the contact. The contact is created if none with this email exists.
`name`	String	Name of the contact.
`phoneNumber`	String	Phone number of the contact.
`title`	String	Title of the contact.

TextFilter

Text filter implementation.

Field	Type	Description
`key`	String!	The key for the filter.
`value`	String!	Text value for the filter.

UpdateApplicationDNSFirewallRuleInput

Field	Type	Description
`action`	FirewallRuleAction	The action to take when the rule is matched.
`applicationID`	Int	The ID of the Netstar application to associate with the rule.
`boundDHCPRuleUUIDs`	[UUID!]	List of UUIDs of DHCP rules to which the application DNS firewall rule is bound.
`categoryID`	Int	The ID of the Netstar category to associate with the rule.
`domain`	String	The domain or FQDN that is matched by the rule, allowing for wildcards denoted by '*'.
`groupID`	Int	The ID of the Netstar group to associate with the rule.
`isEnabled`	Boolean	Indicates whether the rule is enabled.
`name`	String	The name of the DNS firewall rule.
`priority`	Int	The priority of the rule; if not specified, will default to 1 greater than the highest existing priority.

UpdateAutoVPNMemberInput

Updates an existing AutoVPN member.

Field	Type	Description
`permittedVLANUUIDs`	[UUID!]	List of permitted VLAN unique identifiers. The associated VLANs must have participatesInVPNs set to true.

UpdateFirewallRuleInput

Input type for updating an existing firewall rule.

Field	Type	Description
`action`	FirewallRuleAction	The action to take when the firewall rule matches (e.g., DENY or PERMIT).
`boundPhyInterfaceUUIDs`	[UUID!]	List of UUIDs of physical interfaces to which the firewall rule is bound. The physical interfaces must be uplinks.
`boundVLANUUIDs`	[UUID!]	List of UUIDs of VLANs to which the firewall rule is bound.
`description`	String	A description of the firewall rule.
`dstPortRanges`	[PortRangeInput!]	List of destination port ranges to match traffic to.
`dstPrefixes`	[IPPrefix!]	Destination IP prefixes to match traffic to.
`dstVLANUUID`	UUID	UUID of the destination VLAN to match traffic to.
`isEnabled`	Boolean	Indicates if the firewall rule is currently enabled.
`name`	String	The name of the firewall rule.
`priority`	Int	Priority of the rule within the network, lower priority rules are applied first. If there is an existing rule with the provided value, it and all subsequent occupied values will be incremented.
`protocols`	[IPProtocol!]	List of IP protocols to match.
`srcPortRanges`	[PortRangeInput!]	List of source port ranges to match traffic from.
`srcPrefixes`	[IPPrefix!]	Source IP prefixes to match traffic from.
`tags`	[String!]	List of tags associated with the firewall rule.

UpdateIDSIPSConfigInput

Field	Type	Description
`boundCategories`	[IDSIPSConfigCategoryBindingInput!]	If set, replaces the list of bound categories.
`boundRules`	[IDSIPSConfigRuleBindingInput!]	If set, replaces the list of bound rules.
`enabledVLANUUIDs`	[UUID!]	VLANs to enable IDS/IPS for. The enabled VLANs will be set to this value if provided.
`ipsRuleDuration`	Duration	How long rules generated by IPS stay valid.
`isEastWestProtectionEnabled`	Boolean	If east-west protection is enabled.
`minIPSSeverity`	Int	The IPS minimum severity to act on.
`minSeverity`	Int	The minimum severity to act on.
`mode`	IDSIPSMode	The mode IDS/IPS should act in.
`safelist`	[IPPrefix!]	List of subnets that should never be blocked.
`suppressedCategories`	[IDSIPSConfigCategorySuppressionInput!]	If set, replaces the list of category suppressions.
`suppressedRules`	[IDSIPSConfigRuleSuppressionInput!]	If set, replaces the list of rule suppressions.

UpdateIDSIPSCustomRuleInput

A custom intrusion rule definition for IDS/IPS. These currently apply tls.sni rules.

Field	Type	Description
`action`	FirewallRuleAction	The action this rule applies.
`applicationID`	Int	The ID of the Netstar application to associate with the rule.
`boundVLANUUIDs`	[UUID!]	List of UUIDs of VLANs to which the rule is bound.
`domain`	String	The FQDN this rule applies to.
`isEnabled`	Boolean	If this rule is enabled.
`name`	String	A name to identify this rule.

UpdateOutletInterfaceInput

Input type for updating an outlet interface.

Field	Type	Description
`isEnabled`	Boolean	Whether or not the outlet interface is enabled.

UpdateSSIDInput

Field	Type	Description
`description`	String	Description of the SSID.
`encryptionProtocol`	SSIDEncryptionProtocol	Encryption protocol used by the SSID.
`isBand2GAllowed`	Boolean	Enable or disable broadcasting the SSID on the 2.4 GHz band.
`isBand5GAllowed`	Boolean	Enable or disable broadcasting the SSID on the 5 GHz band.
`isBand6GAllowed`	Boolean	Enable or disable broadcasting the SSID on the 6 GHz band.
`isEnabled`	Boolean	Enable or disable the SSID.
`isEnabledForAllAccessPoints`	Boolean	Enable the SSID for all access points or only specified ones.
`isGuest`	Boolean	Mark the SSID as a guest network.
`isHidden`	Boolean	Hide the SSID from being broadcasted.
`isIsolateClientsEnabled`	Boolean	Enable client isolation on the SSID.
`password`	String	Pre-shared key (PSK) for the SSID.
`passwordRotationCadence`	SSIDPasswordRotationCadence	Cadence for automatic password rotation.
`passwordRotationDayOfMonthLocal`	Int	The day of the month for password rotation in the network's local time zone.
`passwordRotationDayOfWeekLocal`	Int	The day of the week for password rotation in the network's local time zone (0 = Sunday).
`passwordRotationHourOfDayLocal`	Int	The hour of the day for password rotation in the network's local time zone.
`ssid`	String	Name of the SSID.
`vlanUUID`	UUID	UUID of the VLAN to associate with the SSID.

UpdateSupportAssignmentGroupInput

Input to update a support assignment group.

Field	Type	Description
`isDefault`	Boolean	Whether this is the default assignment group for the company.
`name`	String	Name of the assignment group.

UpdateSupportCasesInput

Represents the input for updating support cases

Field	Type	Description
`assignedTo`	SupportCaseContactInput	Assignee contact for the case.
`closeCode`	SupportCaseCloseCode	Close code to set on each case.
`closeNotes`	String	Closing notes to set on each case.
`contacts`	[SupportCaseContactInput!]	The complete list of contacts to set on each case. Contacts not in this list will be removed.
`customer`	SupportCaseContactInput	Customer contact for the case. (e.g., the creator of the case)
`description`	String	Description to set on each case.
`externalID`	String	Client-supplied external identifier for the case.
`issueLocation`	String	Issue location of the case.
`issueType`	IssueType	Issue type of the case.
`macAddress`	String	MAC address of the device in the case.
`networkUUID`	UUID	Network to associate with each case.
`origin`	SupportCaseOrigin	Origin to set on each case.
`parentSupportCaseUUID`	UUID	Parent support case for the case.
`priority`	SupportCasePriority	Priority to set on each case.
`remoteAssignmentGroupUUID`	UUID	Remote assignment groups working the case.
`requester`	SupportCaseContactInput	Requester contact for the case.
`resolvedBy`	SupportCaseContactInput	Person who resolved the case.
`status`	SupportCaseStatus	Status to set all cases to.
`subject`	String	Subject to set on each case.
`technologyType`	TechnologyType	Technology type of the case.

UpdateVLANInput

Field	Type	Description
`description`	String	A new description for the VLAN.
`ipV4ClientAssignmentProtocol`	ClientAssignmentProtocol	Updates the protocol for assigning IPv4 addresses to clients on this VLAN.
`ipV4ClientGateway`	IPV4	Updates the IPv4 gateway address for this VLAN.
`ipV4ClientPrefixLength`	Int	Updates the IPv4 prefix length (subnet mask) for this VLAN.
`ipV6ClientAssignmentProtocol`	ClientAssignmentProtocol	Updates the protocol for assigning IPv6 addresses to clients on this VLAN.
`ipV6ClientGateway`	IPV6	Updates the IPv6 gateway address for this VLAN.
`ipV6ClientPrefixLength`	Int	Updates the IPv6 prefix length (subnet mask) for this VLAN.
`isEnabled`	Boolean	Enable or disable the VLAN.
`name`	String	A new name for the VLAN.
`vlanID`	Int	The new VLAN ID. Must be between 1 and 4094 and unique per network.

Deprecated

The following are deprecated and may be removed in a future release. Use the suggested replacement and avoid them in new integrations.

Field	Type	Description
`ClientMetricsTimeseriesFilterInput.eventType`	WirelessClientConnectionEventType	Filter events by event type. Use `eventTypes` instead.

Need help?

If you run into any issues or have questions, please reach out to our Support Engineering team by opening a ticket via the Dashboard: https://dashboard.meter.com/support

Was this helpful?

PreviousEnums NextMutations