https://control.com/textbook/wireless-instrumentation/radio-systems/
Satellite communication requires very high transmitter and receiver gains, due to inevitable signal weakening over the extremely long distances between a ground-based antenna and a satellite antenna in geosynchronous orbit around the Earth. When determining the effectiveness of a radio system, one must include losses in cables, connectors, lightning arrestors, and other elements in the signal path in addition to the antenna itself.
https://control.com/technical-articles/what-is-the-bacnet-protocol/
The BACnet defines a total of 23 standard objects and covers almost all general-purpose functions in a building automation system. A collection of objects performing a specific function is called a BACnet Device. BACnet’s communication model is the Client-Server model.
https://control.com/textbook/programmable-logic-controllers/inputoutput-io-capabilities/
An alternative scheme for system expansion is to network multiple PLCs together, where each PLC has its own dedicated rack and processor. Through the use of communication instructions, one PLC may be programmed to read data from and/or write data to another PLC, effectively using the other PLC as an extension of its own I/O.
https://control.com/forums/
Discussion forum for anything communication systems and equipment related.
https://control.com/technical-articles/what-is-baud-rate-and-how-does-it-work/
Most control systems contain tried-and-true communication protocols but also a bit behind the convenience of modern automatic configuration.
https://control.com/forums/forums/general-communications-chat.6/
Discussion forum for anything communication systems and equipment related.
https://control.com/forums/threads/tsxpcx1031cable-for-rs485-connection-to-port1-of-twido.20944/#post-122249
The TSXPCX1031 cable is the specified serial programming lead for the Twido PLC. You must turn the switch on the cable to position 2 for programming. The Twido uses Modbus as it's native communications protocol.
https://control.com/news/belden-expands-it-ot-portfolio-with-new-connectivity-products/
The system supports preterminated and splice applications and provides up to 384 fibers and 192 MPO-12/8 ports in a 4U enclosure. Belden's Safe-T-Line portfolio has also expanded to include CPR Cca (s1b, d1, a1) and EN 50200 PH120-certified cables. Shielded and unshielded versions are available for fire alarm, evacuation, and emergency communication systems that require circuit integrity during a fire.
https://control.com/textbook/digital-data-acquisition-and-networks/the-hart-digitalanalog-hybrid-standard/
With digital communication, the only data limitation is speed (data rate), not quantity. The control system may even communicate information to the transmitter using the same digital protocol, using this digital data channel to switch between different measurement range sets, activating special features (e.g.
https://control.com/technical-articles/understanding-the-industrial-network-protocol-cc-link/
CC-Link is primarily used in factory automation environments, with strong representation in industries like automotive manufacturing, electronics and semiconductor fabrication, food and beverage packaging, and machine tooling and CNC systems. You'll often see it in Mitsubishi-heavy environments, and it operates mainly at the field device level and controller level, handling communication between PLCs, remote I/O modules, HMIs, drives, and sensors.
https://control.com/latest/motors-controls/motors/
This guide shows you how to set up RS-485 communication between the FX3U PLC and the FR-D700 inverter with the FX3U-485-BD. You can control speed and monitor the system using ladder logic.
https://control.com/forums/threads/rs232-rs485-modbus.13861/
MODBUS as protocol has a set of rules to define the manner in which two or more devices can share data and RS-232 or RS-485 are electrical interfaces they are defined in voltages levels for serving as the media for communications protocols. Hope this helps. Regards. Raymundo ... Modbus describes the "language" used the two units. It is register based system using defined function codes for a master to read from or write to a slave node.
https://control.com/news/acromag-adds-opc-ua-and-mqtt-support-to-remote-i-o-module-series/
A web interface is used to configure ... rack and communication module. The NT Ethernet module is compatible with popular industrial Ethernet protocols such as Modbus TCP/IP, Ethernet/IP, and ProfiNet and is configured with the web interface. Conditions can also be configured into the I/O modules to allow simple if/then/else statements. With an OPC UA server connection, field devices and control systems can access ...
https://control.com/technical-articles/how-to-configure-fanuc-i-o-the-group-and-digital-guide/
Many automated applications that utilize FANUC robots use input and output signals for communication and system control. The communication process is similar to how humans speak and listen.
https://control.com/technical-articles/understanding-xml-and-data-exchange-formats-for-industrial-settings/
Communication Protocol - Facilitates the transfer of data from one system to another in a universally accepted methodology.
https://control.com/forums/threads/seeking-insights-on-establishing-communication-with-micrologix-1200-plc-and-using-the-communications-toggle-button.51421/
Dear LuisLarraga You can push the toggle button then DCOMM light will appear and you can communicate the PLC because you don't know previous user defined configuration and again you can push and it will bring you back to previous setting and DCOMM light will be off.
https://control.com/forums/threads/mosfet-basic-working-principle.20336/
V can look like a communication system where source is the transmitter and drain is the receiver and gate to be the channel. V supply voltage to all the three juctions and a depletion layer is formed below the source and drain while positive voltage is applied to the gate.
https://control.com/textbook/disassembly-of-a-sliding-stem-control-valve/the-hart-digitalanalog-hybrid-standard/
The HART standard also supports a mode of operation that is totally digital, and capable of supporting multiple HART instruments on the same pair of wires. This is known as multidrop mode, where field instruments are slaves and the communicator (or control system) is the master.
https://control.com/technical-articles/what-is-a-remote-terminal-unit-rtu/
Later, in the 1960s and 1970s, with the advances in computer science, it became possible to implement the first electronics-based SCADA and RTU systems. Instrumentation was installed at longer distances than before, and RTUs offered the ability to acquire larger volumes of data and perform some basic control functions. The modern version of the RTU was introduced in the 1980s and developed throughout the 1990s. The RTU was now microprocessor-based and able to execute more advanced logic, similar to PLCs. New communication protocols were introduced, allowing for even more information to be exchanged reliably.
https://control.com/forums/threads/bently-nevada-3500-modbus-communication.27522/#post-142597
1. you will need to instal a MVI56-MCM (controlLogix chassis)or MVI94-MCM (Flex I/O chassis) to conect with 3500 Bently system. These modules have a setup jumper (Rs-232 or Rs-485). You must mach it with Bently Nevada configuration setting. See below 2. Using the Bently software you must program the Bently's communications module.
Facebook
Google
GitHub
Linkedin