Scribd
Upload
2 views

Lecture 6

Chapter 5 discusses digital transmission techniques, focusing on line coding, block coding, and scrambling for representing digital data as digital signals. It explains the relationship between data rate and signal rate, emphasizing the importance of increasing data rates while minimizing signal rates to optimize bandwidth. The chapter also covers various line coding schemes, including unipolar and polar schemes, as well as block coding methods like 8B/10B for error detection and synchronization.

Uploaded by

Sama Kabil
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2 views

Lecture 6

Chapter 5 discusses digital transmission techniques, focusing on line coding, block coding, and scrambling for representing digital data as digital signals. It explains the relationship between data rate and signal rate, emphasizing the importance of increasing data rates while minimizing signal rates to optimize bandwidth. The chapter also covers various line coding schemes, including unipolar and polar schemes, as well as block coding methods like 8B/10B for error detection and synchronization.

Uploaded by

Sama Kabil
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 20

Chapter 5

Digital Transmission

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
4.1
Digital Transmission
 In this lecture, we see how we can represent digital
data by using digital signals. The conversion
involves three techniques: line coding, block
coding, and scrambling. Line coding is always
needed, block coding and scrambling may or may
not be needed.
 Line coding: is the process of converting digital
data to digital signals. We assume that data, in the
form of text, numbers, graphical images, audio, or
video, are stored in computer memory as sequences
of bits.
Line Coding Modulation

 At the sender, digital data are encoded into a digital


signal; at the receiver, the digital data are recreated
by decoding the digital signal. Before discussing
different line coding schemes, we address their
common characteristics
Signal Element Versus Data Element
 In digital data communications, a signal element
carries data elements.
 data elements are what we need to send.
 signal elements are what we can send.
 data elements are being carried.
 signal elements are the carriers.

 We define a ratio r which is the number of data


elements carried by each signal element.
 r = data element / signal element
Signal Element Versus Data Element
Data Rate Versus Signal Rate
 The data rate defines the number of data elements
(bits) sent in 1 s. The unit is bits per second (bps).
The signal rate is the number of signal elements
sent in 1 s. The unit is the baud.
 The data rate is sometimes called the bit rate; the

signal rate is sometimes called the pulse rate, the


modulation rate, or the baud rate.
 We now need to consider the relationship between

data rate (N) and signal rate (S): S = N/r, and


r= data element / signal element
Data Rate Versus Signal Rate
 One goal in data communications is to increase the
data rate while decreasing the signal rate.

 Increasing the data rate increases the speed of


transmission; decreasing the signal rate decreases
the bandwidth requirement.

 In our vehicle-people analogy, we need to carry


more people in fewer vehicles to prevent traffic
jams. We have a limited bandwidth in our
transportation system.
Data Rate Versus Signal Rate
 We now need to consider the relationship between
data rate (N) and signal rate (S)
 We can formulate the relationship between data
rate and signal rate as

 where N is the data rate (bps); c is the case factor,


which varies for each case; S is the number of
signal elements; and r is the previously defined
factor.
Data Rate Versus Signal Rate
 Example: A signal is carrying data in which
one data element is encoded as one
signal element (r = 1). If the bit rate is
100 kbps, what is the average value of
the baud rate if c is between 0 and l?
Line Coding Schemes
Unipolar Scheme
 In a Unipolar scheme, all the signal levels are on
one side of the time axis, either above or below.

 NRZ (Non-Return-to-Zero), scheme in which the


positive voltage defines bit one “1” and the zero
voltage defines bit 0.

 It is called NRZ because the signal does not return


to zero at the middle of the bit.
Unipolar Scheme, NRZ
Polar Schemes
 In polar schemes, the voltages are on the both sides
of the time axis. For example, the voltage level for
0 can be positive and the voltage level for I can be
negative.

In NRZ-L the level of the voltage determines the value of the bit.

NRZ-L have an average signal rate of N/2 Baud (Bd).


Example
 A system is using NRZ-L to transfer 10-Mbps data.
What are the average signal rate and minimum
bandwidth?

 Solution
 The average signal rate is S =N/2 =10.000000
bps /2 = 5.000000 baud = 5000 k baud. The
minimum bandwidth for this average baud rate is
5000 kHz
Polar-Return to Zero (RZ)
 uses three values: positive, negative, and zero. In
RZ, the signal changes not between bits but during
the bit.
Summary
Block Coding
 Conversion of Digital Data to Digital Signal
involves three techniques: Line coding – Block
coding – Scrambling.
 helps in error detection and re-transmission of the
signal.
 It is normally referred to as mB/nB coding as it
replaces each m-bit data group with an n-bit data
group (where n>m).
 Thus, its adds extra bits (redundancy bits) which
helps in synchronization at receiver’s and sender’s
end and also providing some kind of error
detecting capability.
Block Coding
 Block coding normally involves three steps:
division, substitution, and combination.
 In the division step, a sequence of bits is divided
into groups of m bits.
 In the substitution step, we substitute an m-bit
group for an n-bit group.
 Finally, the n-bit groups are combined together to
form a stream which has more bits than the original
bits.
Block Coding
Block Coding
8B/10B (eight binary/ten binary)

 This encoding is similar to 4B/5B encoding except


that a group of 8 bits of data is now substituted by
a 10-bit code and it provides greater error detection
capability than 4B/5B.

You might also like