Architectural Design

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 1

Objectives


To introduce architectural design and to discuss its importance To explain the architectural design decisions that have to be made To introduce three complementary architectural styles covering organisation, decomposition and control To discuss reference architectures are used to communicate and compare architectures

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 2

Topics covered
    

Architectural design decisions System organisation Decomposition styles Control styles Reference architectures

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 3

Software architecture


The design process for identifying the subsystems making up a system and the framework for sub-system control and communication is architectural design. The output of this design process is a description of the software architecture.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 4

Architectural design
 

An early stage of the system design process. Represents the link between specification and design processes. Often carried out in parallel with some specification activities. It involves identifying major system components and their communications.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 5

Advantages of explicit architecture



Stakeholder communication
Architecture may be used as a focus of discussion by system stakeholders. Means that analysis of whether the system can meet its non-functional requirements is possible. The architecture may be reusable across a range of systems.

System analysis

Large-scale reuse

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 6

Architecture and system characteristics



Performance
Localise critical operations and minimise communications. Use large rather than fine-grain components. Use a layered architecture with critical assets in the inner layers. Localise safety-critical features in a small number of subsystems. Include redundant components and mechanisms for fault tolerance. Use fine-grain, replaceable components.
Software Engineering, 7th edition. Chapter 11 Slide 7

Security

Safety

Availability

Maintainability

Ian Sommerville 2004

Architectural conflicts


Using large-grain components improves performance but reduces maintainability. Introducing redundant data improves availability but makes security more difficult. Localising safety-related features usually means more communication so degraded performance.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 8

System structuring


Concerned with decomposing the system into interacting sub-systems. The architectural design is normally expressed as a block diagram presenting an overview of the system structure. More specific models showing how subsystems share data, are distributed and interface with each other may also be developed.
Software Engineering, 7th edition. Chapter 11 Slide 9

Ian Sommerville 2004

Packing robot control system

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 10

Box and line diagrams



Very abstract - they do not show the nature of component relationships nor the externally visible properties of the sub-systems. However, useful for communication with stakeholders and for project planning.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 11

Architectural design decisions



Architectural design is a creative process so the process differs depending on the type of system being developed. However, a number of common decisions span all design processes.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 12

Architectural design decisions



      

Is there a generic application architecture that can be used? How will the system be distributed? What architectural styles are appropriate? What approach will be used to structure the system? How will the system be decomposed into modules? What control strategy should be used? How will the architectural design be evaluated? How should the architecture be documented?

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 13

Architecture reuse


Systems in the same domain often have similar architectures that reflect domain concepts. Application product lines are built around a core architecture with variants that satisfy particular customer requirements. Application architectures are covered in Chapter 13 and product lines in Chapter 18.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 14

Architectural styles


The architectural model of a system may conform to a generic architectural model or style. An awareness of these styles can simplify the problem of defining system architectures. However, most large systems are heterogeneous and do not follow a single architectural style.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 15

Architectural models
 

 

Used to document an architectural design. Static structural model that shows the major system components. Dynamic process model that shows the process structure of the system. Interface model that defines sub-system interfaces. Relationships model such as a data-flow model that shows sub-system relationships. Distribution model that shows how sub-systems are distributed across computers.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 16

System organisation


Reflects the basic strategy that is used to structure a system. Three organisational styles are widely used:
A shared data repository style; A shared services and servers style; An abstract machine or layered style.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 17

The repository model



Sub-systems must exchange data. This may be done in two ways:

Shared data is held in a central database or repository and may be accessed by all subsystems; Each sub-system maintains its own database and passes data explicitly to other sub-systems.

When large amounts of data are to be shared, the repository model of sharing is most commonly used.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 18

CASE toolset architecture

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 19

Repository model characteristics



Advantages
Efficient way to share large amounts of data; Sub-systems need not be concerned with how data is produced Centralised management e.g. backup, security, etc. Sharing model is published as the repository schema. Sub-systems must agree on a repository data model. Inevitably a compromise; Data evolution is difficult and expensive; No scope for specific management policies; Difficult to distribute efficiently.

Disadvantages

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 20

Client-server model


 

Distributed system model which shows how data and processing is distributed across a range of components. Set of stand-alone servers which provide specific services such as printing, data management, etc. Set of clients which call on these services. Network which allows clients to access servers.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 21

Film and picture library

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 22

Client-server characteristics


Advantages
Distribution of data is straightforward; Makes effective use of networked systems. May require cheaper hardware; Easy to add new servers or upgrade existing servers. No shared data model so sub-systems use different data organisation. Data interchange may be inefficient; Redundant management in each server; No central register of names and services - it may be hard to find out what servers and services are available.

Disadvantages

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 23

Abstract machine (layered) model

 

Used to model the interfacing of sub-systems. Organises the system into a set of layers (or abstract machines) each of which provide a set of services. Supports the incremental development of subsystems in different layers. When a layer interface changes, only the adjacent layer is affected. However, often artificial to structure systems in this way.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 24

Version management system

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 25

Modular decomposition styles



Styles of decomposing sub-systems into modules. No rigid distinction between system organisation and modular decomposition.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 26

Sub-systems and modules



A sub-system is a system in its own right whose operation is independent of the services provided by other sub-systems. A module is a system component that provides services to other components but would not normally be considered as a separate system.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 27

Modular decomposition


Another structural level where sub-systems are decomposed into modules. Two modular decomposition models covered
An object model where the system is decomposed into interacting object; A pipeline or data-flow model where the system is decomposed into functional modules which transform inputs to outputs.

If possible, decisions about concurrency should be delayed until modules are implemented.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 28

Object models


Structure the system into a set of loosely coupled objects with well-defined interfaces. Object-oriented decomposition is concerned with identifying object classes, their attributes and operations. When implemented, objects are created from these classes and some control model used to coordinate object operations.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 29

Invoice processing system

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 30

Object model advantages



 

Objects are loosely coupled so their implementation can be modified without affecting other objects. The objects may reflect real-world entities. OO implementation languages are widely used. However, object interface changes may cause problems and complex entities may be hard to represent as objects.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 31

Function-oriented pipelining


Functional transformations process their inputs to produce outputs. May be referred to as a pipe and filter model (as in UNIX shell). Variants of this approach are very common. When transformations are sequential, this is a batch sequential model which is extensively used in data processing systems. Not really suitable for interactive systems.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 32

Invoice processing system

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 33

Pipeline model advantages

 

 

Supports transformation reuse. Intuitive organisation for stakeholder communication. Easy to add new transformations. Relatively simple to implement as either a concurrent or sequential system. However, requires a common format for data transfer along the pipeline and difficult to support event-based interaction.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 34

Control styles


Are concerned with the control flow between sub-systems. Distinct from the system decomposition model. Centralised control
One sub-system has overall responsibility for control and starts and stops other sub-systems. Each sub-system can respond to externally generated events from other sub-systems or the systems environment.

Event-based control

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 35

Centralised control


A control sub-system takes responsibility for managing the execution of other sub-systems. Call-return model
Top-down subroutine model where control starts at the top of a subroutine hierarchy and moves downwards. Applicable to sequential systems. Applicable to concurrent systems. One system component controls the stopping, starting and coordination of other system processes. Can be implemented in sequential systems as a case statement.

Manager model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 36

Call-return model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 37

Real-time system control

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 38

Event-driven systems


Driven by externally generated events where the timing of the event is outwith the control of the subsystems which process the event. Two principal event-driven models
Broadcast models. An event is broadcast to all subsystems. Any sub-system which can handle the event may do so; Interrupt-driven models. Used in real-time systems where interrupts are detected by an interrupt handler and passed to some other component for processing.

Other event driven models include spreadsheets and production systems.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 39

Broadcast model


Effective in integrating sub-systems on different computers in a network. Sub-systems register an interest in specific events. When these occur, control is transferred to the subsystem which can handle the event. Control policy is not embedded in the event and message handler. Sub-systems decide on events of interest to them. However, sub-systems dont know if or when an event will be handled.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 40

Selective broadcasting

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 41

Interrupt-driven systems


Used in real-time systems where fast response to an event is essential. There are known interrupt types with a handler defined for each type. Each type is associated with a memory location and a hardware switch causes transfer to its handler. Allows fast response but complex to program and difficult to validate.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 42

Interrupt-driven control

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 43

Reference architectures


Architectural models may be specific to some application domain. Two types of domain-specific model
Generic models which are abstractions from a number of real systems and which encapsulate the principal characteristics of these systems. Covered in Chapter 13. Reference models which are more abstract, idealised model. Provide a means of information about that class of system and of comparing different architectures.

Generic models are usually bottom-up models; Reference models are top-down models.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 44

Reference architectures


Reference models are derived from a study of the application domain rather than from existing systems. May be used as a basis for system implementation or to compare different systems. It acts as a standard against which systems can be evaluated. OSI model is a layered model for communication systems.
Software Engineering, 7th edition. Chapter 11 Slide 45

Ian Sommerville 2004

OSI reference model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 46

Case reference model



Data repository services

Storage and management of data items. Managing groups of entities. Definition and enaction of process models. Tool-tool and tool-environment communication. User interface development.

Data integration services

Task management services

Messaging services

User interface services

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 47

The ECMA reference model

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 48

Key points


The software architecture is the fundamental framework for structuring the system. Architectural design decisions include decisions on the application architecture, the distribution and the architectural styles to be used. Different architectural models such as a structural model, a control model and a decomposition model may be developed. System organisational models include repository models, client-server models and abstract machine models.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 49

Key points


Modular decomposition models include object models and pipelining models. Control models include centralised control and event-driven models. Reference architectures may be used to communicate domain-specific architectures and to assess and compare architectural designs.

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 50

Architectural models


Different architectural models may be produced during the design process Each model presents different perspectives on the architecture

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 51

Architecture attributes


Performance
Localise operations to minimise sub-system communication Use a layered architecture with critical assets in inner layers Isolate safety-critical components Include redundant components in the architecture Use fine-grain, self-contained components

Security

Safety

Availability

Maintainability

Ian Sommerville 2004

Software Engineering, 7th edition. Chapter 11

Slide 52