OTC DAIHEN EUROPE GMBH

NEW INVERTER SERIES

CO2/MAG WELDING MACHINE

CPTX – I SERIES
 CPTX-I 400 2W
The High-End CPTX machine with inverter technology

• Industrial device for simple welding tasks

• High ignition reliability

• Stepless adjustable

• 100% duty cycle

• CPTX-I 500 2W compared with the CPTX-I400 2W

with increased performance
SPECIFICATION CPTX-I 400 2W

General name Inverter welding power source

Welding power supply CPTX-I 400 2w
Number of phases 3 phases

Rated input voltage 400 ±15%

(Common to both 50 and 60Hz)

Rated output current 400A

Rated output current range 30A ～ 400A

Rated output voltage range 15,5V ～ 34V

Maximum no-load voltage 80 V

Rated duty cycle 100 % / 400A

External dimensions (WxDxH) 720×1120×1220 mm

Mass 120 kg
 OPERATION PANEL
1
2 3 1 LOAD key
2 ARC CONTROL key
3 GAS SELECT key
4 WIRE DIAMETER SELECT key
5 WIRE TYPE SELECT key
4
6 ENTER key
Operation
5 7 SYNERG/INDIV key
Panel

8 SAVE key
9 WELDING CURRENT ADJUSTING knob
10 DISPLAY CHANGE key
11 WELDING VOLTAGE ADJUSTING knob
12 CRATER FILLER key
13 GAS CHECK key
6 7 9 11 14 INCHING key
13
8 14
12
10
 BASIC SETTING
Welding Method Wire Diameter CPTX-I 400 2W CPTX-I 500 2W
Ø (mm)
Type of Welding Wire Gas

Ø 0.8 ✔
Ø 1.0 ✔ ✔
STEEL SOLID CO2
Ø 1.2 ✔ ✔
Ø 1.6 ✔
Set a welding mode by using Ø 0.8 ✔
• GAS SELECT key Ø 1.0 ✔ ✔
• WIRE TYPE SELECT key STEEL SOLID MAG
Ø 1.2 ✔ ✔
• WIRE DIA SELECT key
Ø 1.6 ✔
in accord with customer needs.
Ø 1.2 ✔ ✔
STEEL FLUX-CORED CO2
Ø 1.6 ✔
The optional modes:
STEEL FLUX-CORED MAG Ø 1.2 ✔ ✔
Ø 0.8 ✔
Ø 1.0 ✔ ✔
STAINLESS SOLID MIG
Ø 1.2 ✔ ✔
Ø 1.6 ✔

STAINLESS FLUX- Ø 1.2 ✔ ✔

CO2
CORED Ø 1.6 ✔
DC STICK - - ✔ ✔
NOTE 1: MAG gas refers to a mixed gas of 80% argon(Ar) and 20% carbon dioxide(CO2)gas.
NOTE 2: MIG gas refers to a mixed gas of 97,5% argon(Ar) and 2,5% CO2 gas.
 STANDARD CONFIGURATION
① For Carbon Dioxide (CO2 gas)
The CO2 gas used for welding shall be a conforming product with a purity above
99.5% and a moisture content below 0.05%. Use CO2 gas with a higher purity for
higher welding quality as required.

② For MAG Gas

Argon (Ar) 80%, carbon dioxide (CO2) 20%.

③ For MIG Gas

Argon (Ar) 98%, Oxygen (O2) 2%

④ For DC stick welding (option)

Welding electrode holder (for DC STICK)
Prepare welding electrode holder according to the DC STICK mode of the welding power source.
OUTSIDE VIEW

1520

740
720

1120
 WIRE FEEDER UNIT
Specification WF 04
Compatibility CPTX-I 400 2W C1035 OTCE
CPTX-I 500 2W C1036 OTCE
Intermittency 500A @ 60%
Torch Connector EURO Connector
Supply Voltage DC 24 V
Wire Feed Rate Max. 22m/min
Thickness of Filler Steel, Stainless Ø0.8mm, Ø1.0mm, Ø1.2mm,
Material steel Ø1.6mm
Aluminum Ø1.0mm, Ø1.2mm, Ø1.6mm
Filler Material Reel Outer Diameter Max. Ø300m
Data
Weight Max. 15kg
Shielding Gas CO2, Ar, ArCO2 mixture
(max. 4bar)
Shielding Gas Connector UNF 9/16“ – on the back
Cooling Fluid water, water/glycol mixture
(max. 5bar)
Cooling Fluid Connector UNF 5/8“ – on the back;
NW5 quick connector (blue, red)
– on the front
IP Level of Protection IP21
Compliance Standard EN IEC 60974-5
Weight (without wire reel) 15.6kg
Dimensions (W x L x H) 258 x 694 x 416mm
Thank you for your attention!