GSM BASED FIELD
MOTOR CONTROL
INTERNAL GUIDE:
K.RAMAKRISHNA REDDY
G.RAJA ADITHYA REDDY (08K91A0468)
S.RAJESH GOUD (08K91A0473)
T.SANJAY (08K91A0483)
A.SINDHU (08K91A0498)
V.SOUJANYA (08K91A04A1)
INTRODUCTION
This project provides an excellent solution for the
farmer need not go to the farm to water his field.
The farmer can use his cell phone to start/stop the
irrigation motor. The system at the motor side will
respond to the farmer in text messages.
TECHNOLOGIES USED
Embedded Systems
Mobile Telephone Systems
EMBEDDED SYSTEMS
Embedded systems do a very specific task.
Embedded system allow the system hardware to be
simplified so costs are reduced.
Embedded systems are constrained for power. Many
embedded systems operate through a battery, the
power consumption has to be very low.
MOBILE TELEPHONE SYSTEM
Cellular is one of the fastest growing and most
demanding telecommunications applications.
The concept of cellular service is the use of low power
transmitters where frequencies can be reused within a
geographic area.
Here in our project GSM modem is used to send the
messages to start/stop motor.
BLOCK DIAGRAM OF THE PROJECT
MICROCONTROLLER AT89S52
GSM MODEM
•A GSM modem is a wireless
modem that works with a
GSM wireless network.
•Like a GSM mobile phone,
a GSM modem requires a
SIM card from a wireless
carrier in order to operate.
• AT commands are
instructions used to control a
modem.
CONCEPTS OF SMS TECHNOLOGY
1. Validity Period of an SMS Message
2. Message Status Reports
3. Message Submission Reports
4.Message Delivery Reports
SERIAL COMMUNICATION
MAX 232 IC used here is for serial communication.
This IC provides best noise rejection and very reliable
against discharges and short circuits.
this IC converts RS232 voltage levels to
microcontroller voltage levels and vice versa.
INTERFACING MAX232 WITH
MICROCONTROLLER
LIQUID CRYSTAL DISPLAY
LCD screen consists of two lines with 16 characters each.
It is having the ability to display numbers, characters and
graphics.
Ease of programming for characters and graphics.
LCD interface with the
microcontroller
DRIVER CIRCUTE
The MOC301XM and MOC302XM series are
optically isolated triac driver devices.
This series is designed for interfacing between
electronic controls and power triacs to control
resistive and inductive loads for 115/240V AC
operations.
SOFTWARE TOOLS
Keil µv3, Proloads are the two software tools used to
program microcontroller.
Keil compiler is software used where the machine
language code is written and compiled.
Proload is a programmer which itself contains a
microcontroller in it other than the one which is to be
programmed.
SOFTWARE PROGRAMMING
ADVANTAGES
Availability more.
We can control the devices by sending sms.
Cheaper
More effective
Easy to change
DISADVANTAGES
Requires a continuous power supply
Continuously recharge the GSM SIMCARD
Maintenance cost is high
In case of SIM damage we have to reprogram
APPLICATIONS
Utilized for irrigation purpose.
Can be operated from any place in the world.
No need of manual check for moisture level in soil.
User friendly.
CONCLUSION
The project intends to interface the microcontroller
with the GSM modem and start the motor as per the
message received from the user mobile.
It can be concluded that the design implemented in the
present work provide portability, flexibility and the data
transmission is also done with low power consumption.
FUTURE SCOPE
The project can be used as a base for realizing a
scheme to be implemented in other projects of greater
level such as weather forecasting, temperature
updates, device synchronization, etc.
The project itself can be modified to achieve a
complete Home Automation.
