Scribd
Upload
22 views8 pages

Lte Oss Kpi

Uploaded by

Joshua Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
22 views8 pages

Lte Oss Kpi

Uploaded by

Joshua Cruz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

LTE OSS KPI

JOSHUA CRUZ
Accessibility KPI
Are used to measure properly of whether services requested by users can be accessed in given condition,
also refers to the quality of being available when users needed. eg. user request to access the network,
access the voice call, data call

• RRC setup success rate


• RRC setup success rate is calculated based on the counter at the eNodeB when the eNodeB
received the RRC connection request from UE. Number of RRC connection attempt is collected by
the eNodeB to the measurement at point A, and the number of successful RRC connection
calculated at point C.
• ERAB setup success rate
• ERAB setup success rate KPI shows the probability of success ERAB to access all services including VoIP in a
cell or radio network. KPI is calculated based counter ERAB connection setup attempt (point A) and successful
ERAB setup (point B)
• Call Setup Success Rate
• Call Setup Success Rate KPI call setup indicates the probability of success for all service on the cell or radio
network. KPI is calculated by multiplying the RRC setup success rate KPI, S1 signaling connection success rate
KPI, and ERAB success rate KPI.

4G - LTE
Retainability KPI
Are used to measure how the network keep user's possession or able to hold and provide the services for the users

• Call drop rate


• VoIP call drop arise when VoIP ERAB release is not normal. Each ERAB associated with QoS information.
Here's an illustration of two procedures being done to release ERAB namely: ERAB release indication and the
UE context release request

• Service Call drop rate

4G - LTE
Mobility KPI
Are used to measure the performance of network which can handle the movement of users and still retain the service
for the user, such as handover

• Intra-Frequency Handover Out Success Rate


• Inter-Frequency Handover Out Success Rate
• Inter-RAT Handover Out Success Rate (LTE to WCDMA)
• Inter RAT Handover Out Success rate shows the success rate KPI HO from LTE cell or radio network
to a WCDMA cell.

4G - LTE
Integrity KPI
Are used to measure the character or honesty of network to its user, such as what is the throughput, latency which users were served.

• E-UTRAN IP Throughput
• A KPI that shows how E-UTRAN impacts the service quality provided to an end-user.
Payload data volume on IP level per elapsed time unit on the Uu interface.

• IP Throughput in DL
• E-UTRAN IP Latency
• A measurement that shows how E-UTRAN impacts on the delay experienced by an end-user.

4G - LTE
Availability KPI
Are used to measure the availability of network, suitable or ready for users to use services.

• E-UTRAN Cell Availability/Partial cell availability (node restarts


excluded)
• E-UTRAN Cell Availability. A KPI that shows Availability of E-UTRAN Cell.
Percentage of time that the cell is considered available.

4G - LTE
Utilization KPI
Are used to measure the utilization of network, whether the network capacity is reached its resource.

• Mean Active Dedicated EPS Bearer Utilization


• This KPI describes the ratio of the mean number of active dedicated EPS bearer to the maximum
number of active dedicated EPS bearers provided by EPC network, and it is used to evaluate
utilization performance of EPC network.
This KPI is obtained by the mean number of dedicated EPS bearers in active mode divided by the
system capacity.

4G - LTE

You might also like