RADAR SYSTEMS

RADAR SYSTEMS
Course Content of Unit- I : Basics of Radar
Introduction
Maximum Unambiguous Range
Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
 Course Content of Unit- I : Radar Equation
Modified Radar Range Equation
SNR
Probability of detection
Probability of False Alarm,
Integration of Radar Pulses RCS of Targets
Creeping Wave
Transmitter Power
PRF and Range Ambiguities
System Losses (qualitative treatment)
Illustrative Problems.
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
 Introduction
Basic Principles and features :
Radar is a contraction of the words Radio Detection And
Ranging.
Radar is an electromagnetic system for the detection and location
of objects.
 It operates by transmitting a particular type of waveform, a
pulse-modulated sine wave for example, and detects the nature
of the echo signal.
Radar can see through conditions such as darkness, haze, fog,
rain, and snow which is not possible for human vision.
 In addition, radar has the advantage that it can measure the
distance or range to the object.
The Radar consists of a transmitting antenna emitting
electromagnetic Radiation generated by an oscillator, a
receiving antenna, and a signal receiver.

A portion of the transmitted signal is intercepted by a

reflecting object (target) and is re-radiated in all directions.
The receiving antenna collects the returned signal and delivers
it to a receiver, where it is processed to detect the presence of
the target and to extract its location and relative velocity.

The distance to the target is determined by measuring the time

taken for the Radar signal to travel to the target and back.
If relative motion exists between target and radar, the shift in the
carrier frequency of the reflected wave (Doppler Effect) is a
measure of the target's relative (radial) velocity and may be used
to distinguish moving targets from stationary objects.
In radars which continuously track the movement of a target, a
continuous indication of the rate of change of target position is
also available.
It was first developed as a detection device to warn the approach
of hostile aircraft and for directing antiaircraft weapons.
A well designed modern radar can extract more information from
the target signal than merely range.

Radar was originally developed to satisfy the needs of the

military for surveillance and weapon control
 Radar Waveforms
Pulse Repetition Frequency(PRF): The No.of pulses Transmitted
per Second
Pulse Repetition Time(PRT): The time from beginning of first
pulse to the beginning of next pulse.
Pulse Width (PW): The duration of transmitted pulse is called
PW
Rest Time or Receiver Time: The time between two successive
transmitted pulses
 Measurement of Range:
The most common radar waveform is a train of narrow,
rectangular-shape pulses modulating a sine wave carrier.
The distance, or range, to the target is determined by
measuring the time TR taken by the pulse to travel to the
target and return.
Since electromagnetic energy propagates at the speed of
light c (3 x 108 m/s) the range
Range (R) is given by : R= c TR / 2
The factor 2 appears in the denominator because of the
two-way propagation of radar. With the range R in
kilometers or nautical miles, and TR in microseconds,
the above relation becomes: R(km) = 0.15 X TR ( μS )
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
 Maximum unambiguous range
Once the transmitter pulse is emitted by the radar, sufficient time
must elapse to allow any echo signals to return and be detected
before the next pulse is transmitted.
Therefore, the rate at which the pulses may be transmitted is
determined by the longest range at which targets are expected.
If the pulse repetition frequency is too high, echo signals from
some targets might arrive after the transmission of the next pulse,
and ambiguities in measuring range might result.
Echoes that arrive after the transmission of the next pulse are
called second-time-around (or multiple-time-around) echoes.
Such an echo would appear to be at a much shorter range than the
actual.
The range beyond which targets appear as second-time-around
echoes is called the maximum unambiguous range
It is given by: R unambig. = C /2fp
Where fp = Pulse Repetition Frequency (PRF) , in Hz.
 This can also be explained with the following simple
relations.
TR is the time elapsed between transmission pulse and Echo pulse.
TR = 2R/C where R = Range of target
TR increases with Range R and in extreme case Echo pulse
merges with next Transmitted Pulse. Then TR becomes equal to TP
Where TP= Pulse repetition period
TR max = TP = 2 R max /C and so R max = CTP/2 = C/2fP = R unambig

Therefore R unambig is directly proportional to the Pulse period TP

( or Inversely proportional to the PRF fp)
The maximum unambiguous is also called as maximum usable
range , it is the range where radar has sufficient power and
sensitivity.
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
 Simple Radar range Equation

 The radar equation :

The performance of Radar system is depends on number
of factors including curvature of earth surface and
characteristics of Transmitter, Receiver, Antenna, Target
and Environment.

The Radar range equation determines the maximum

measurable distance from the radar to the target

It serves both as a tool for understanding radar operation

and as a basis for radar design.
 Derivation of the simple form of radar equation:
 If the power of the radar transmitter is denoted by Pt and the
power density (watts per unit area) at a distance R from the
radar is equal to the transmitter power divided by the surface
area 4πR2 of an imaginary sphere of radius R.

 Power density from an isotropic antenna = Pt / 4πR2

 Radars employ directive antennas to direct the radiated power

Pt into some particular direction.

 The gain Gt of an antenna is a measure of the increased power

radiated in the particular direction

 Then, Power density from directive antenna = Pt.Gt/ 4πR2

Now, The ability of target to reflect energy is
characterized by the effective area or RCS, let this area is
σ, and is defined by the relation

Power density of echo signal at radar

=(Pt.Gt/ 4πR2)(σ) / 4πR2

• The radar antenna captures a portion of the echo power. If the

effective area of the receiving antenna is denoted as Ae , then the
power Pr . received by the radar is given by
 Pr = (Pt. Gt/ 4πR2)(σ) / 4πR2 ). Ae

= (Pt .Gt. Ae. σ)/ (4π)2.R4

The receiving antenna captures a portion of echo energy
incident on it.

The received power by antenna is the product of incident

power and effective area Ae of receiving antenna.

Therefore ,the received power is given by

Pr = P’ x Ae

= Pt .Gt. Ae. σ / (4π)2.R4

The maximum radar range Rmax is the distance beyond which the
target cannot be detected. It occurs when the received echo signal
power Pr just equals the minimum detectable signal Pmin.

Therefore
Rmax = [ Pt .Gt. Ae. σ / (4π)2. Pmin]1/4

 This expression is called as fundamental Radar equation.

The effective area, Ae is related with physical area of the
antenna A by relation
Ae = ή A where ή antenna aperture efficiency

If the transmitting and receiving antenna is common,

According to Antenna theory gives the relationship
between the transmitting gain and the receiving effective
area of an antenna as:

Gt = 4π. Ae /λ2 and Ae = Gt .λ2 / 4π

 Now , substituting Ae in fundamental radar
equation, we get

This is the another simple form of radar range equation

 Limitations of the simple form of Radar equation:

Does not adequately describe the performance of practical

radar.

Many important factors that affect range are not explicitly

included.

In practice, the observed maximum radar ranges are usually

much smaller than what would be predicted by the above
equations, sometimes by as much as a factor of two.

There are many reasons for the failure of the simple radar
equation to correlate with actual performance and these will
be explained subsequently in the modified Radar range
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
Radar block diagram and operation:

The operation of a typical pulse radar is described with the help

of a simple block diagram shown in the figure below.

There are two sections of Radar system

i) Transmitter section ii) Receiver Section

The operation of the radar is described in more detail, starting
with the transmitter.
Transmitter : The transmitter in Fig is shown as a power
amplifier, such as a klystron, travelling-wave tube, crossed-field
amplifier, or solid state device .
A power oscillator such as a magnetron also can be used as
the transmitter; but the magnetron usually is of limited average
power compared with power amplifiers, especially the klystron,
which can produce much larger average power than can a
magnetron and is more stable.
Transmitters not only must be able to generate high power with
stable wave -forms, but they must often operate over a wide
bandwidth, with high efficiency
Duplexer : The duplexer acts as a rapid switch to protect the
receiver from damage when the high-power transmitter is on.

On reception, with the transmitter off, the duplexer directs the
weak received signal to the receiver rather than to the transmitter.

 Duplexers generally are some form of gas-discharge device and

may be used with solid-state or gas-discharge receiver protectors.

A solid-state circulator is sometimes used to provide further

isolation between the transmitter and the receiver.
Antenna :

The transmitter power is radiated into space by a directive

antenna which concentrates the energy into a narrow beam.

Mechanically steered parabolic reflector antennas and planar

phased arrays both find wide application in radar.

Electronically steered phased array antennas are also used.

Waveform Generator:

 The most common radar waveform is a repetitive train of short

pulses.

 CW is employed on some specialized radars for the measurement of

radial velocity from the Doppler frequency shift.

FM/CW is used when range is to be measured with a CW waveform

Pulse compression waveforms are used when the resolution of a short
pulse.

MTI radars with low pulse repetition frequencies (PRFs) and pulse
Doppler radars with high PRFs often use waveforms with multiple
pulse repetition intervals in order to avoid range and/or Doppler
ambiguities
Pulse modulator:

 A modulator turns the transmitter on and off in synchronism

with the input pulses. when a power oscillator is used, it is also
turned on and off by a pulse modulator to generate a pulse.
waveform

Low noise RF Amplifier :

 The receiver is almost always a Superheterodyne.

 The input or RF stage be a low noise amplifier which produces

the RF pulse proportional to the transmitted signal
Mixer and Local oscillator:

The mixer and local oscillator convert the RF signal to the

Intermediate Frequency ( IF ).

 Sometimes the low noise input stage is omitted and the mixer
becomes the first stage of the receiver.

A receiver with a mixer as the input stage will less sensitive

because of the mixer’s higher noise figure.
IF Amplifier :

 It amplifies the IF pulse. IF amplifier is designed as matched

filter which maximizes the output peak signal to mean noise
ratio.

 The matched filter maximizes the detectability of weak echo

signals and attenuates unwanted signals

 The signal bandwidth of superheterodyne receiver is

determined by the bandwidth of its IF stage.
Second Detector :

 The IF Amplifier followed by a crystal diode which is called

the second detector or demodulator. Its purpose is to assist in
extracting the signal modulation from the carrier.

Video Amplifier :

 Video amplifier is designed to provide the sufficient

amplification or gain to raise the level of the input signal to a
magnitude where it can be seen on a display
Display :

The most common form of cathode-ray tube display is the Plan

Position Indicator, or PPI (Fig. a) which maps in polar coordinates
the location of the target in azimuth and range.

This is an intensity-modulated display in which the amplitude of the

receiver output modulates the electron-beam intensity (z axis) as the
electron beam is made to sweep outward from the center of the tube.

The beam rotates in angle in response to the antenna position.

Another form of display is the A-scope, shown in Fig. which plots
target amplitude (y axis) vs. range (x axis), for some fixed direction.

 This is a deflection-modulated display. It is more suited for tracking-

radar application than for surveillance radar.
 Fig
(a) PPI presentation displaying Range vs. Angle
(intensity modulation)

(b) A-scope presentation displaying Amplitude vs. Range

(deflection modulation)
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
Radar frequencies and applications:
Conventional radars are operated at frequencies extending
from about 220 MHz to 35 GHz, a spread of more than seven
octaves. These are not necessarily the limits, since radars can
be, and have been, operated at frequencies outside either end of
this range.

The place of radar frequencies in the electromagnetic spectrum

is shown in the figure below.

Some of the nomenclature employed to designate the various

frequency regions is also shown in this figure.
ELECROMAGNETIC SPECTRUM
Table 1.1: Standard radar-frequency letter-band nomenclature
Applications of Radar:
1.General
Ground-based radar is applied chiefly to the detection,
location and tracking of aircraft of space targets

Shipborne radar is used as a navigation aid and safety device

to locate buoys, shorelines and other ships. It is also used to
observe aircraft

Airborne radar is used to detect other aircraft, ships and land

vehicles. It is also used for mapping of terrain and avoidance
of thunderstorms and terrain.

Spaceborne radar is used for the remote sensing of terrain and

2. Air Traffic Control :
Used to provide air traffic controllers with position and other
information on aircraft flying within their area of responsibility
(airways and in the vicinity of airports)

 High resolution radar is used at large airports to monitor aircraft

and ground vehicles on the runways, taxiways and ramps.

GCA (ground controlled approach) or PAR (precision approach

radar) provides an operator with high accuracy aircraft position
information in both the vertical and horizontal. The operator
uses this information to guide the aircraft to a landing in bad
weather.

MLS (microwave landing system) and ATC radar beacon systems

 3.Air Navigation :
Weather avoidance radar is used on aircraft to detect and
display areas of heavy precipitation and turbulence

Terrain avoidance and terrain following radar (primarily

military)

Radio altimeter (FM/CW or Pulse) – to measure height

Doppler navigator

Ground mapping radar of moderate resolution sometimes

used for navigation
4. Ship Safety :

 These are one of the least expensive, most reliable and largest applications of radar

 Detecting other craft and buoys to avoid collision Automatic detection and
tracking equipment (also called plot extractors) are available with these radars for
collision avoidance

 Shore based radars of moderate resolution are used from harbour surveillance and
as an aid to navigation

5.Space :

 Radars are used for rendezvous and docking and was used for landing on the moon

 Large ground based radars are used for detection and tracking of satellites

 Satellite-borne radars are used for remote sensing (SAR, synthetic aperture radar)
6.Remote Sensing:
Used for sensing geophysical objects (the environment)

 Radar astronomy - to probe the moon and planets

Ionospheric sounder (used to determine the best frequency to use for

HF communications)
 Earth resources monitoring radars measure and map sea conditions,
water resources, ice cover, agricultural land use, forest conditions,
geological formations, environmental pollution (Synthetic Aperture
Radar, SAR and Side Looking Airborne Radar SLAR)

7. Law Enforcement
 Automobile speed radars

 Intrusion alarm systems

8. Military Use:
Early warning of intruding enemy aircraft & missiles

Tracking hostile targets and providing location information

to Air Defense systems consisting of Tracking Radars
controlling guns and missiles.

Battle field surveillance

Information Friend or Foe IFF

Navigation of ships, aircraft, helicopter etc.

Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
Prediction of Range Performance:
 The simple form of Radar equation derived earlier expresses
the maximum radar range Rmax in terms of radar and target
parameters:

 Where Pt = transmitted power, watts

Gt = antenna gain
Ae = antenna effective aperture, m2
σ = radar cross section, m2
Pmin = minimum detectable signal, watts
All the parameters are to some extent under the control of the
radar designer, except for the target cross section σ.

The radar equation states that if long ranges are desired :

The transmitted power must be large

The radiated energy must be concentrated into a narrow beam

with high transmitting antenna gain

The received echo energy must be collected with a large antenna

aperture

The receiver must be sensitive to weak signals

In practice, the simple radar equation does not predict the range
performance of actual radar equipment to a satisfactory degree of
accuracy.

The predicted values of radar range are usually optimistic. In some

cases, the actual range might be only half of that is predicted.

Part of this discrepancy is due to

The failure of the above equation to explicitly include the various losses
that can occur throughout the system.

The loss in performance usually experienced when electronic equipment

is operated in the field rather than under laboratory-type conditions .

Another important factor i.e the statistical or unpredictable nature of

Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
Minimum detectable signal:
The ability of a radar receiver to detect a weak echo signal is
limited by the noise energy that occupies the same portion of
the frequency spectrum as does the signal energy and
accompanies the signal.

The weakest signal the receiver can detect is called the

minimum detectable signal.

It is difficult to define minimum detectable signal (MDS)

because of its statistical nature and because the criterion for
deciding whether a target is present or not is not too well
defined.
Detection is normally based on establishing a threshold level at
the output of the receiver
Whenever Rx output signal which is a mixture of echo and
noise crosses this threshold, then it is detected as a target. This
is called threshold detection.
Consider the output of a typical radar receiver as a function of
time as shown in the figure below which typically represents
one sweep of the video output displayed on an A-scope.
The envelope has a fluctuating appearance due to the random nature
of noise and consists of three targets A, B and C of different signal
amplitudes.

The signal at A is large which has much larger amplitude than the
noise. Hence target detection is possible without any difficulty and
ambiguity.

Next consider the two signals at B and C, representing target echoes

of equal amplitude. The noise voltage accompanying the signal at B
is large enough so that the combination of signal plus noise exceeds
the threshold and target detection is still possible.

But for the target C, the noise is not as large and the resultant signal
plus noise does not cross the threshold and hence target is not
detected.
Threshold Level setting:

Weak signals such as C would not be lost if the threshold level

were lower. But too low a threshold increases the likelihood that
noise alone will rise above the threshold and is taken as target.

Such an occurrence is called a false alarm. Therefore, if the

threshold is set too low, false target indications are obtained,

But if it is set too high, targets might be missed. The selection of

the proper threshold level is a compromise that depends upon
how important it is if a mistake is made either by probability of a
miss or probability of a false alarm
1. Failing to recognize a signal that is present
(probability of a miss) or by

2. Falsely indicating the presence of a signal when it

does not exist (probability of a false alarm)

The signal-to noise ratio necessary to provide

adequate detection is one of the important parameters
that must be determined in order to compute the
minimum detectable signal.
Introduction Course Content of Unit- I : Basics of Radar

Maximum Unambiguous Range

Simple Radar range Equation
Radar Block Diagram and Operation
Radar Frequencies and Applications
Prediction of Range Performance
Minimum Detectable Signal
Receiver Noise
Illustrative Problems
Receiver noise:
Noise is unwanted electromagnetic energy which interferes
with the ability of the receiver to detect the wanted signal
thus limiting the receiver sensitivity.
It may originate within the receiver itself, or it may enter
via the receiving antenna along with the desired signal.

If the radar were to operate in a perfectly noise-free

environment so that no external sources of noise
accompanied the desired signal, and if the receiver itself
were so perfect that it did not generate any excess noise
There would still exist an unavoidable component of
noise generated by the thermal motion of the conduction
electrons in the ohmic portions of the receiver input
stages.

This is called thermal noise, or Johnson’s noise, and is

directly proportional to the temperature of the ohmic
portions of the circuit and the receiver band width.
The available noise power generated by a receiver of bandwidth
Bn (in hertz) at a temperature T (degrees Kelvin) is given by :

Available Thermal-noise power = k T Bn

where k = Boltzmann's constant =1.38 x 10-23J/deg

T is taken to be273 K
The factor kT is 3.77 x 10-21 .Bn W/Hz

Whether the noise is generated by a thermal mechanism the noise

at the output of the receiver may be considered as thermal-noise
power obtained from an “ideal“ receiver multiplied by a factor
called the noise figure.
The noise figure Fn of a receiver is defined by the equation:

Fn = No/ kTo Bn.Ga

Where No = noise output from receiver

Ga = available gain.
Temperature To is taken to be 273 K

The noise No is measured over the linear portion of the receiver

input-output characteristic.
The available gain Ga is the ratio of the signal out So to the
signal in Si and kTo Bn is the input noise Ni in an ideal
receiver.

The above equation may be rewritten as:

Therefore, the noise figure may be interpreted, as a measure of

the degradation of signal-to noise-ratio as the signal passes
through the receiver.
Thank you