Register Transfer and Micro-operations 1

Overview

 Register Transfer Language

 Register Transfer

 Bus and Memory Transfers

 Arithmetic Micro-operations

 Logic Micro-operations

 Shift Micro-operations

 Arithmetic Logic Shift Unit

Register Transfer and Micro-operations 2

Logic Micro operations

CSE 211
Register Transfer and Micro-operations 3

Logic Microoperations

CSE 211
Register Transfer and Micro-operations 4

Hardware Implementation
Ai
0
Bi

1
4X1 Fi
MUX
2

3 Select

S1
S0

Function table
S1 S0 Output -operation
0 0 F=AB AND
0 1 F = AB OR
1 0 F=AB XOR
1 1 F = A’ Complement

CSE 211
Register Transfer and Micro-operations 5

Applications of Logic Microoperations

 Logic microoperations can be used to manipulate individual bits or a
portions of a word in a register

 Consider the data in a register A. In another register, B, is bit data

that will be used to modify the contents of A

 Selective-set AA+B
 Selective-complement AAB
 Selective-clear A  A • B’
 Mask (Delete) AA•B
 Clear AAB
 Insert A  (A • B) + C

CSE 211
Register Transfer and Micro-operations 6

Applications of Logic Microoperations

1. In a selective set operation, the bit pattern in B is used to set certain bits in A

1 1 0 0 At
1010 B
1 1 1 0 At+1 (A  A + B)

If a bit in B is set to 1, that same position in A gets set to 1, otherwise that

2. Inbita in A keepscomplement
selective its previous operation,
value the bit pattern in B is used to
complement certain bits in A
1 1 0 0 At
1010 B

0 1 1 0 At+1 (A  A  B)
If a bit in B is set to 1, that same position in A gets complemented from its
original value, otherwise it is unchanged
CSE 211
Register Transfer and Micro-operations 7

Applications of Logic Microoperations

3. In a selective clear operation, the bit pattern in B is used to clear certain bits
in A
1 1 0 0 At
1010 B

0 1 0 0 At+1 (A  A  B’)
If a bit in B is set to 1, that same position in A gets set to 0, otherwise it is
unchanged
4. In a mask operation, the bit pattern in B is used to clear certain bits in A
1 1 0 0 At
1010 B

1 0 0 0 At+1 (A  A  B)

If a bit in B is set to 0, that same position in A gets set to 0, otherwise it is

unchanged
CSE 211
Register Transfer and Micro-operations 8

Applications of Logic Microoperations

5. In a clear operation, if the bits in the same position in A and B are the same,
they are cleared in A, otherwise they are set in A
1 1 0 0 At
1010 B

0 1 1 0 At+1 (A  A  B)

CSE 211
Register Transfer and Micro-operations 9

Applications of Logic Microoperations

6. An insert operation is used to introduce a specific bit pattern into A
register, leaving the other bit positions unchanged
This is done as
– A mask operation to clear the desired bit positions, followed by
– An OR operation to introduce the new bits into the desired positions
– Example
• Suppose you wanted to introduce 1010 into the low order four bits of A:
• 1101 1000 1011 0001 A (Original)
1101 1000 1011 1010 A
(Desired)

• 1101 1000 1011 0001 A (Original)

1111 1111 1111 0000 Mask
1101 1000 1011 0000 A (Intermediate)
0000 0000 0000 1010 Added bits
1101 1000 1011 1010 A (Desired)

CSE 211
Register Transfer and Micro-operations 10

Shift Microoperations
• There are three types of shifts
– Logical shift
– Circular shift
– Arithmetic shift
• What differentiates them is the information that goes into the serial input

• A right shift operation

Serial
input

• A left shift operation

Serial
input

CSE 211
Register Transfer and Micro-operations 11

Logical Shift
• In a logical shift the serial input to the shift is a 0.

• A right logical shift operation:

0

• A left logical shift operation:

0

• In a Register Transfer Language, the following notation is used

– shl for a logical shift left
– shr for a logical shift right
– Examples:
• R2  shr R2
• R3  shl R3
CSE 211
Register Transfer and Micro-operations 12

Circular Shift
• In a circular shift the serial input is the bit that is shifted out of the other
end of the register.

• A right circular shift operation:

• A left circular shift operation:

• In a RTL, the following notation is used

– cil for a circular shift left
– cir for a circular shift right
– Examples:
• R2  cir R2
• R3  cil R3
CSE 211
Register Transfer and Micro-operations 13

Arithmetic Shift
• An arithmetic shift is meant for signed binary numbers (integer)
• An arithmetic left shift multiplies a signed number by two
• An arithmetic right shift divides a signed number by two
• Sign bit : 0 for positive and 1 for negative
• The main distinction of an arithmetic shift is that it must keep the sign of
the number the same as it performs the multiplication or division

• A right arithmetic shift operation:

sign
bit

• A left arithmetic shift operation: 0

sign
bit

CSE 211
Register Transfer and Micro-operations 14

Arithmetic Shift
• An left arithmetic shift operation must be checked for the overflow

0
sign
bit

Before the shift, if the leftmost two

V bits differ, the shift will result in an
overflow

• In a RTL, the following notation is used

– ashl for an arithmetic shift left
– ashr for an arithmetic shift right
– Examples:
» R2  ashr R2
» R3  ashl R3

CSE 211
Register Transfer and Micro-operations 15

Hardware Implementation of Shift Microoperation

CSE 211
Register Transfer and Micro-operations 16

Arithmetic Logic and Shift Unit

S3
S2 C
i
S1
S0

D
Arithmetic i

Circuit
Select

0 4x1
C i+1 F
1 i
MUX S3 S2 S1 S0 Cin Operation
2 0 0 0 0 0 F=A
3 0 0 0 0 1 F=A+1
0 0 0 1 0 F=A+B
E 0 0 0 1 1 F=A+B+1
Logic i 0 0 1 0 0 F = A + B’
Bi 0 0 1 0 1 F = A + B’+ 1
Circuit 0 0 1 1 0 F=A-1
A 0 0 1 1 1 F=A
i
0 1 0 0 X F=AB
shr
A 0 1 0 1 X F = A B
i-1 0 1 1 0 X F=AB
shl
A 0 1 1 1 X F = A’
i+1
1 0 X X X F = shr A
1 1 X X X F = shl A

CSE 211