Central Processing Unit 1

CENTRAL PROCESSING UNIT

• Introduction

• General Register Organization

• Stack Organization

• Instruction Formats

• Addressing Modes

• Data Transfer and Manipulation

• Program Control

Computer Organization Computer Architectures Lab

Central Processing Unit 2 Introduction

MAJOR COMPONENTS OF CPU

• Storage Components
Registers
Flags

• Execution (Processing) Components

Arithmetic Logic Unit(ALU)
Arithmetic calculations, Logical computations, Shifts/Rotates

• Transfer Components
Bus

• Control Components
Control Unit Register
File ALU

Control Unit

Computer Organization Computer Architectures Lab

Central Processing Unit 3

REGISTERS
• In Basic Computer, there is only one general purpose register,
the Accumulator (AC)
• In modern CPUs, there are many general purpose registers
• It is advantageous to have many registers
– Transfer between registers within the processor are relatively fast
– Going “off the processor” to access memory is much slower

• How many registers will be the best ?

Computer Organization Computer Architectures Lab

Central Processing Unit 4 General Register Organization

GENERAL REGISTER ORGANIZATION

Clock Input

R1
R2
R3
R4
R5
R6
R7
Load
(7 lines)
SELA { MUX MUX } SELB
3x8 A bus B bus
decoder

SELD
OPR ALU

Output

Computer Organization Computer Architectures Lab

Central Processing Unit 5 Control

OPERATION OF CONTROL UNIT

The control unit
Directs the information flow through ALU by
- Selecting various Components in the system
- Selecting the Function of ALU
Example: R1  R2 + R3
[1] MUX A selector (SELA): BUS A  R2
[2] MUX B selector (SELB): BUS B  R3
[3] ALU operation selector (OPR): ALU to ADD
[4] Decoder destination selector (SELD): R1  Out Bus
3 3 3 5
Control Word SELA SELB SELD OPR

Encoding of register selection fields

Binary
Code SELA SELB SELD
000 Input Input None
001 R1 R1 R1
010 R2 R2 R2
011 R3 R3 R3
100 R4 R4 R4
101 R5 R5 R5
110 R6 R6 R6
111 R7 R7 R7
Computer Organization Computer Architectures Lab
Central Processing Unit 6 Control

ALU CONTROL
Encoding of ALU operations OPR
Select Operation Symbol
00000 Transfer A TSFA
00001 Increment A INCA
00010 ADD A + B ADD
00101 Subtract A - B SUB
00110 Decrement A DECA
01000 AND A and B AND
01010 OR A and B OR
01100 XOR A and B XOR
01110 Complement A COMA
10000 Shift right A SHRA
11000 Shift left A SHLA

Examples of ALU Microoperations

Symbolic Designation
Microoperation SELA SELB SELD OPR Control Word
R1  R2  R3 R2 R3 R1 SUB 010 011 001 00101
R4  R4  R5 R4 R5 R4 OR 100 101 100 01010
R6  R6 + 1 R6 - R6 INCA 110 000 110 00001
R7  R1 R1 - R7 TSFA 001 000 111 00000
Output  R2 R2 - None TSFA 010 000 000 00000
Output  Input Input - None TSFA 000 000 000 00000
R4  shl R4 R4 - R4 SHLA 100 000 100 11000
R5  0 R5 R5 R5 XOR 101 101 101 01100

Computer Organization Computer Architectures Lab

Central Processing Unit 7 Stack Organization

REGISTER STACK ORGANIZATION

Stack
- Very useful feature for nested subroutines, nested interrupt services
- Also efficient for arithmetic expression evaluation
- Storage which can be accessed in LIFO
- Pointer: SP
- Only PUSH and POP operations are applicable
stack Address
Register Stack Flags 63

FULL EMPTY

Stack pointer 4
SP C 3
6 bits B 2
A 1
Push, Pop operations 0
DR
/* Initially, SP = 0, EMPTY = 1, FULL = 0 */

PUSH POP
SP  SP + 1 DR  M[SP]
M[SP]  DR SP  SP  1
If (SP = 0) then (FULL  1) If (SP = 0) then (EMPTY  1)
EMPTY  0 FULL  0

Computer Organization Computer Architectures Lab

Central Processing Unit 8 Stack Organization

MEMORY STACK ORGANIZATION

1000
Memory with Program, Data, Program
PC (instructions)
and Stack Segments
Data
AR (operands)

SP 3000
stack
3997
3998
3999
4000
4001
- A portion of memory is used as a stack with a Stack grows
processor register as a stack pointer In this direction

- PUSH: SP  SP - 1
M[SP]  DR
- POP: DR  M[SP]
SP  SP + 1
- Most computers do not provide hardware to check stack overflow (full

stack) or underflow (empty stack)  must be done in software

Computer Organization Computer Architectures Lab
Central Processing Unit 9 Stack Organization

REVERSE POLISH NOTATION

• Arithmetic Expressions: A + B
A+B Infix notation
+AB Prefix or Polish notation
AB+ Postfix or reverse Polish notation
- The reverse Polish notation is very suitable for stack
manipulation
• Evaluation of Arithmetic Expressions
Any arithmetic expression can be expressed in parenthesis-free
Polish notation, including reverse Polish notation

(A* B) + (C * D)  AB* CD* +

(3 * 4) + (5 * 6)  34*56*+

6
4 5 5 30
3 3 12 12 12 12 42
3 4 * 5 6 * +

Computer Organization Computer Architectures Lab

Central Processing Unit 10
Evaluation of Arithmetic Expressions

(A+ B) *[C * (D+E) +F ]  AB + DE + C * F + *

The Conversion from infix notation to

reverse Polish notation must take into
consideration the operational hierarchy
adopted for infix notation. This hierarchy
dictates that we first perform all arithmetic
inside inner parentheses, then inside
outer parentheses, and do multiplication
and division operations before addition
and subtraction operations.

Computer Organization Computer Architectures Lab

Central Processing Unit 11

REVERSE POLISH NOTATION

Convert the following expressions from infix I in to reveres Polish notation

(a). A*B+C*D +E*F

(b). A*B+A *(B*D+C*E )
(c). A+B*[C*D+E*(F+G)]
(d). A*[B+C*(D+E)]
F*(G+H)

Computer Organization Computer Architectures Lab

Central Processing Unit 12

• (a) AB * CD * EF * + +
• (b) AB * ABD * CE * + * +
• (c) FG + E * CD * + B * A +
• (d) ABCDE + * + * FGH + */

Computer Organization Computer Architectures Lab

Central Processing Unit 13

PROCESSOR ORGANIZATION
• In general, most processors are organized in one of 3 ways

– Single register (Accumulator) organization

» Basic Computer is a good example
» Accumulator is the only general purpose register

– General register organization

» Used by most modern computer processors
» Any of the registers can be used as the source or destination for
computer operations

– Stack organization
» All operations are done using the hardware stack
» For example, an OR instruction will pop the two top elements from the
stack, do a logical OR on them, and push the result on the stack

Computer Organization Computer Architectures Lab

Central Processing Unit 14 Instruction Format

INSTRUCTION FORMAT
• Instruction Fields
OP-code field - specifies the operation to be performed
Address field - designates memory address(es) or a processor register(s)
Mode field - determines how the address field is to be interpreted (to
get effective address or the operand)

• The number of address fields in the instruction format

depends on the internal organization of CPU

• The three most common CPU organizations:

Single accumulator organization:
ADD X /* AC  AC + M[X] */
General register organization:
ADD R1, R2, R3 /* R1  R2 + R3 */
ADD R1, R2 /* R1  R1 + R2 */
MOV R1, R2 /* R1  R2 */
ADD R1, X /* R1  R1 + M[X] */
Stack organization:
PUSH X /* TOS  M[X] */
ADD
Computer Organization Computer Architectures Lab
Central Processing Unit 15 Instruction Format

THREE, AND TWO-ADDRESS INSTRUCTIONS

• Three-Address Instructions

Program to evaluate X = (A + B) * (C + D) :
ADD R1, A, B /* R1  M[A] + M[B] */
ADD R2, C, D /* R2  M[C] + M[D] */
MUL X, R1, R2 /* M[X]  R1 * R2 */

- Results in short programs

- Instruction becomes long (many bits)

• Two-Address Instructions

Program to evaluate X = (A + B) * (C + D) :

MOV R1, A /* R1  M[A] */

ADD R1, B /* R1  R1 + M[A] */
MOV R2, C /* R2  M[C] */
ADD R2, D /* R2  R2 + M[D] */
MUL R1, R2 /* R1  R1 * R2 */
MOV X, R1 /* M[X]  R1 */

Computer Organization Computer Architectures Lab

Central Processing Unit 16 Instruction Format

ONE, AND ZERO-ADDRESS INSTRUCTIONS

• One-Address Instructions
- Use an implied AC register for all data manipulation
- Program to evaluate X = (A + B) * (C + D) :
LOAD A /* AC  M[A] */
ADD B /* AC  AC + M[B] */
STORE T /* M[T]  AC */
LOAD C /* AC  M[C] */
ADD D /* AC  AC + M[D] */
MUL T /* AC  AC * M[T] */
STORE X /* M[X]  AC */
• Zero-Address Instructions
- Can be found in a stack-organized computer
- Program to evaluate X = (A + B) * (C + D) :
PUSH A /* TOS  A */
PUSH B /* TOS  B */
ADD /* TOS  (A + B) */
PUSH C /* TOS  C */
PUSH D /* TOS  D */
ADD /* TOS  (C + D) */
MUL /* TOS  (C + D) * (A + B) */
POP X /* M[X]  TOS */
Computer Organization Computer Architectures Lab
Central Processing Unit 17 Addressing Modes

ADDRESSING MODES

• Addressing Modes

* Specifies a rule for interpreting or modifying the

address field of the instruction (before the operand
is actually referenced)

* Variety of addressing modes

- to give programming flexibility to the user

- to use the bits in the address field of the
instruction efficiently

Computer Organization Computer Architectures Lab

Central Processing Unit 18 Addressing Modes

TYPES OF ADDRESSING MODES

• Implied Mode
Address of the operands are specified implicitly
in the definition of the instruction
- No need to specify address in the instruction
- EA = AC, or EA = Stack[SP]
- Examples from Basic Computer
CLA, CME, INP

• Immediate Mode
Instead of specifying the address of the operand,
operand itself is specified
- No need to specify address in the instruction
- However, operand itself needs to be specified
- Sometimes, require more bits than the address
- Fast to acquire an operand

Computer Organization Computer Architectures Lab

Central Processing Unit 19 Addressing Modes

TYPES OF ADDRESSING MODES

• Register Mode
Address specified in the instruction is the register address
- Designated operand need to be in a register
- Shorter address than the memory address
- Saving address field in the instruction
- Faster to acquire an operand than the memory addressing
- EA = IR(R) (IR(R): Register field of IR)

• Register Indirect Mode

Instruction specifies a register which contains
the memory address of the operand
- Saving instruction bits since register address
is shorter than the memory address
- Slower to acquire an operand than both the
register addressing or memory addressing
- EA = [IR(R)] ([x]: Content of x)

• Autoincrement or Autodecrement Mode

- When the address in the register is used to access memory, the
value in the register is incremented or decremented by 1
automatically
Computer Organization Computer Architectures Lab
Central Processing Unit 20 Addressing Modes

TYPES OF ADDRESSING MODES

• Direct Address Mode

Instruction specifies the memory address which
can be used directly to access the memory
- Faster than the other memory addressing modes
- Too many bits are needed to specify the address
for a large physical memory space
- EA = IR(addr) (IR(addr): address field of IR)

• Indirect Addressing Mode

The address field of an instruction specifies the address of a memory
location that contains the address of the operand
- When the abbreviated address is used large physical memory can be
addressed with a relatively small number of bits
- Slow to acquire an operand because of an additional memory access
- EA = M[IR(address)]

Computer Organization Computer Architectures Lab

Central Processing Unit 21 Addressing Modes

TYPES OF ADDRESSING MODES

• Relative Addressing Modes

The Address fields of an instruction specifies the part of the address
(abbreviated address) which can be used along with a designated
register to calculate the address of the operand
- Address field of the instruction is short
- Large physical memory can be accessed with a small number of
address bits
- EA = f(IR(address), R), R is sometimes implied
3 different Relative Addressing Modes depending on R;
* PC Relative Addressing Mode (R = PC)
- EA = PC + IR(address)
* Indexed Addressing Mode (R = IX, where IX: Index Register)
- EA = IX + IR(address)
* Base Register Addressing Mode
(R = BAR, where BAR: Base Address Register)
- EA = BAR + IR(address)

Computer Organization Computer Architectures Lab

Central Processing Unit 22 Addressing Modes

ADDRESSING MODES - EXAMPLES -

Address Memory
200 Load to AC Mode
PC = 200 201 Address = 500
202 Next instruction
R1 = 400

399 450
XR = 100
400 700

AC
500 800

600 900

Addressing Effective Content 702 325

Mode Address of AC
Direct address 500 /* AC  (500) */ 800
Immediate operand - /* AC  500 */ 500 800 300
Indirect address 800 /* AC  ((500)) */ 300
Relative address 702 /* AC  (PC+500) */ 325
Indexed address 600 /* AC  (RX+500) */ 900
Register - /* AC  R1 */ 400
Register indirect 400 /* AC  (R1) */ 700
Autoincrement 400 /* AC  (R1)+ */ 700
Autodecrement 399 /* AC  -(R) */ 450
Computer Organization Computer Architectures Lab
Central Processing Unit 23 Data Transfer and Manipulation

DATA TRANSFER INSTRUCTIONS

• Typical Data Transfer Instructions
Name Mnemonic
Load LD
Store ST
Move MOV
Exchange XCH
Input IN
Output OUT
Push PUSH
Pop POP

• Data Transfer Instructions with Different Addressing Modes

Assembly
Mode Convention Register Transfer
Direct address LD ADR AC M[ADR]
Indirect address LD @ADR AC  M[M[ADR]]
Relative address LD $ADR AC  M[PC + ADR]
Immediate operand LD #NBR AC  NBR
Index addressing LD ADR(X) AC  M[ADR + XR]
Register LD R1 AC  R1
Register indirect LD (R1) AC  M[R1]
Autoincrement LD (R1)+ AC  M[R1], R1  R1 + 1
Autodecrement LD -(R1) R1  R1 - 1, AC  M[R1]

Computer Organization Computer Architectures Lab

Central Processing Unit 24 Data Transfer and Manipulation

DATA MANIPULATION INSTRUCTIONS

• Three Basic Types: Arithmetic instructions
Logical and bit manipulation instructions
Shift instructions
• Arithmetic Instructions
Name Mnemonic
Increment INC
Decrement DEC
Add ADD
Subtract SUB
Multiply MUL
Divide DIV
Add with Carry ADDC
Subtract with Borrow SUBB
Negate(2’s Complement) NEG

• Logical and Bit Manipulation Instructions • Shift Instructions

Name Mnemonic Name Mnemonic
Clear CLR Logical shift right SHR
Complement COM Logical shift left SHL
AND AND Arithmetic shift right SHRA
OR OR Arithmetic shift left SHLA
Exclusive-OR XOR Rotate right ROR
Clear carry CLRC Rotate left ROL
Set carry SETC Rotate right thru carry RORC
Complement carry COMC Rotate left thru carry ROLC
Enable interrupt EI
Disable interrupt DI
Computer Organization Computer Architectures Lab
Central Processing Unit 25

FLAG, PROCESSOR STATUS WORD

• In Basic Computer, the processor had several (status) flags – 1 bit
value that indicated various information about the processor’s
state – E, FGI, FGO, I, IEN, R
• In some processors, flags like these are often combined into a
register – the processor status register (PSR); sometimes called a
processor status word (PSW)
• Common flags in PSW are
– C (Carry): Set to 1 if the carry out of the ALU is 1
– S (Sign): The MSB bit of the ALU’s output
– Z (Zero): Set to 1 if the ALU’s output is all 0’s
Status Flag Circuit
– V (Overflow): Set to 1 if there is an overflow A B
8 8
c7
8-bit ALU
c8
F7 - F0
V Z S C
F7
Check for 8
zero output
F
Computer Organization Computer Architectures Lab
Central Processing Unit 26 Program Control

PROGRAM CONTROL INSTRUCTIONS

+1
In-Line Sequencing (Next instruction is fetched
from the next adjacent location in the memory)
PC
Address from other source; Current Instruction,
Stack, etc; Branch, Conditional Branch,
Subroutine, etc

• Program Control Instructions

Name Mnemonic
Branch BR
Jump JMP
Skip SKP
Call CALL
Return RTN
Compare(by  ) CMP
Test(by AND) TST
* CMP and TST instructions do not retain their
results of operations (  and AND, respectively).
They only set or clear certain Flags.

Computer Organization Computer Architectures Lab

Central Processing Unit 27 Program Control

CONDITIONAL BRANCH INSTRUCTIONS

Mnemonic Branch condition Tested condition

BZ Branch if zero Z=1
BNZ Branch if not zero Z=0
BC Branch if carry C=1
BNC Branch if no carry C=0
BP Branch if plus S=0
BM Branch if minus S=1
BV Branch if overflow V=1
BNV Branch if no overflow V=0
Unsigned compare conditions (A - B)
BHI Branch if higher A>B
BHE Branch if higher or equal AB
BLO Branch if lower A<B
BLOE Branch if lower or equal AB
BE Branch if equal A=B
BNE Branch if not equal AB
Signed compare conditions (A - B)
BGT Branch if greater than A>B
BGE Branch if greater or equal AB
BLT Branch if less than A<B
BLE Branch if less or equal AB
BE Branch if equal A=B
BNE Branch if not equal AB

Computer Organization Computer Architectures Lab

Central Processing Unit 28 Program Control

SUBROUTINE CALL AND RETURN

• Subroutine Call Call subroutine
Jump to subroutine
Branch to subroutine
Branch and save return address

• Two Most Important Operations are Implied;

* Branch to the beginning of the Subroutine

- Same as the Branch or Conditional Branch

* Save the Return Address to get the address

of the location in the Calling Program upon
exit from the Subroutine
CALL
• Locations for storing Return Address SP  SP - 1
• Fixed Location in the subroutine (Memory) M[SP]  PC
• Fixed Location in memory PC  EA
• In a processor Register
• In memory stack RTN
- most efficient way PC  M[SP]
SP  SP + 1

Computer Organization Computer Architectures Lab

Central Processing Unit 29 Program Control

PROGRAM INTERRUPT
Types of Interrupts
External interrupts
External Interrupts initiated from the outside of CPU and Memory
- I/O Device → Data transfer request or Data transfer complete
- Timing Device → Timeout
- Power Failure
- Operator

Internal interrupts (traps)

Internal Interrupts are caused by the currently running program
- Register, Stack Overflow
- Divide by zero
- OP-code Violation
- Protection Violation

Software Interrupts
Both External and Internal Interrupts are initiated by the computer HW.
Software Interrupts are initiated by the executing an instruction.
- Supervisor Call → Switching from a user mode to the supervisor mode
→ Allows to execute a certain class of operations
which are not allowed in the user mode
Computer Organization Computer Architectures Lab
Central Processing Unit 30 Program Control

INTERRUPT PROCEDURE
Interrupt Procedure and Subroutine Call
- The interrupt is usually initiated by an internal or
an external signal rather than from the execution of
an instruction (except for the software interrupt)

- The address of the interrupt service program is

determined by the hardware rather than from the
address field of an instruction

- An interrupt procedure usually stores all the

information necessary to define the state of CPU
rather than storing only the PC.

The state of the CPU is determined from;

Content of the PC
Content of all processor registers
Content of status bits
Many ways of saving the CPU state
depending on the CPU architectures

Computer Organization Computer Architectures Lab