CHAPTER - 12

SOUND
CLASS :- IX
MADE BY :- SANJAY KUMAR
SCHOOL :- DAV BORL PUBLIC SCHOOL BINA
1) Production of sound :-
Sound is produced due to the vibration of objects.
Vibration is the rapid to and fro motion of an object.
Eg :- The sound of human voice is produced due to the vibration
of the vocal cords.
A stretched rubber band when plucked vibrates and
produces sound.
Activity :- Strike the prongs of a tuning
fork on a rubber pad and bring it near
the ear. We can hear a sound. If a
Thread
suspended table tennis ball is touched Table tennis
with the vibrating prong, the ball is ball

pushed away repeatedly. This shows

that the prong is vibrating and Vibrating
tuning fork
vibrating objects produces sound.
2) Propagation of sound :-
The sound produced by a vibrating object travels through a
medium to a listener. The medium can be solid, liquid or gas.
When an object vibrates, the particles around the medium vibrates.
The particle in contact with the vibrating object is first displaced from
its equilibrium position. It then exerts a force on the adjacent particle
and the adjacent particle is displaced from its position of rest. After
displacing the adjacent particle the first particle comes back to its
original position. This process repeats in the medium till the sound
reaches the ear.
The disturbance produced by the vibrating body travels through the
medium but the particles do not move forward themselves.
A wave is a disturbance which moves through a medium by the
vibration of the particles of the medium. So sound is considered as a
wave. Since sound waves are produced due to the vibration of
particles of the medium sound waves are called mechanical waves.
Propagation of sound through air :-
Air is the most common medium through which sound travels.
When a vibrating object moves forward, it pushes and compresses the
air in front of it forming a region of high pressure called compression
(C). The compression moves away from the vibrating object. When the
vibrating object moves backward, it forms a region of low pressure
called rarefaction (R). As the object moves to and fro rapidly, it
produces a series of compressions and rarefaction in the air which
makes the sound to propagate in the medium.
A vibrating object producing a series of compressions (C)
and rarefaction (R)

C R C R C R C R
3) Sound needs a medium to travel :-
Sound is a mechanical wave and needs a medium for propagation.
Sound travels through solids, liquids and gases. Sound does not travel
in vacuum.
Activity:-
Suspend an electric bell in an air tight bell jar. Connect the bell jar to a
vacuum pump. If the switch is pressed, we can hear the sound of the
bell. If air is pumped out through the vacuum pump, we cannot hear the
sound of the bell. This shows that sound needs a medium to travel and
sound cannot travel in vacuum.

Cork
Bell jar

Electric bell
4) Sound waves are longitudinal waves :-
Sound propagates in a medium as a series of compressions (C) and
rarefactions (R).
In these waves the particles move back and forth parallel to the
direction of propagation of the disturbance. Such waves are called
longitudinal waves.
There is another kind of waves called transverse waves. In these
waves the particles oscillate up and down perpendicular to the
propagation of the direction of disturbance.
Activity :- Stretch a slinky and push and pull it alternately at one end.
If you mark a dot on the slinky, the dot moves back and forth parallel to
the direction of the propagation of the disturbance.

C R C R C R
5) Characteristics of a sound wave :-
Sound wave can be described by its frequency, amplitude and speed.
Sound can be graphically represented as a wave. There is changes in
the density and pressure as sound moves in a medium.
Compressions are the regions of high pressure and density where
the particles are crowded and are represented by the upper portion of
the curve called crest.
Rarefactions are the regions of low pressure and density where the
particles are spread out and are represented by the lower portion of the
curve called trough.
The distance between two consecutive compressions (crests) or two
consecutive
λ troughs is called wave length. It is represented by the
symbol . (Greek letter lamda). Its SI unit is metre (m).
Pressure or Density

λ λ Crest

Troug
h

compression rarefaction
i) Frequency of sound wave :-
When sound is propagated through a medium, the density of the
medium oscillates between a maximum value and a minimum value.
The change in the density of the medium from a maximum value to a
minimum value and again to the maximum value is one oscillation.
The number of oscillations per unit time is called the frequency of
the sound wave.
It is represented by the symbol ٧ (Greek letter nu).
Its SI unit is hertz (Hz).
ii) Time period of sound wave :-
The time taken for the change in the density of the medium from a
maximum value to a minimum value and again to the maximum value
is the time period of the sound wave.
Or
The time taken for one complete oscillation in the density of the
medium is called the time period of the sound wave.
It is represented by the letter T.
The SI unit is second (s).
Frequency and time are represented as follows :-
٧ for one oscillation
1 1
T = ---- or ٧ = ----
٧ T
iii) Amplitude of sound wave :-
The magnitude of the maximum disturbance in the medium on either
side of the mean value is the amplitude of the sound wave.
Or
The amplitude of sound wave is the height of the crest or tough.
It is represented by the letter A.
The SI unit is the same as that of density or pressure.
Wave disturbance

Wavelength and Amplitude

The wavelength is the distance between the "crests" of two waves that are next to
each other. The amplitude is how high the crests are.
iv) Pitch and loudness of sound :-
The pitch of sound (shrillness or flatness) depends on
the frequency of vibration.
If the frequency is high, the sound has high pitch and if
the frequency is low, the sound has low pitch.

Wavelength, Frequency, and Pitch

Since the sounds are travelling at about the same speed, the one with the shorter wavelength
will go by more frequently; it has a higher frequency, or pitch. In other words, it sounds higher.
 The loudness of sound depends upon the amplitude of
vibration.
If the amplitude is bigger, the sound is loud and if the
amplitude is smaller, the sound is soft.

Amplitude is Loudness

The size of a wave (how much it is "piled up" at the high points) is its amplitude. For
sound waves, the bigger the amplitude, the louder the sound.
v) Speed of sound :-
The speed of sound is different in different media. The speed of
sound is more in solids, less in liquids and least in gases.
The speed of sound also depends on the temperature of the medium.
If the temperature of the medium is more, the speed of sound is more.
Speed of sound in different media at 250C.
State Substance Speed in m/s
Relationship between Aluminium 6420
Solid
Speed (v), frequency Steel 5960
Iron 5950
(٧) and wave length
Brass 4700
(λ) Glass 3980
Water (Sea) 1531
Speed = wave length x Liquid
Water (Distilled) 1498
frequency Ethanol 1207

v=λx٧ Methanol 1103

Hydrogen 1284
Gas
Helium 965
Air 346
Oxygen 316
Sulphur dioxide 213
6) Reflection of sound :-
Like light, sound gets reflected at the surface of a solid or liquid and
follows the laws of reflection.
i) The angle of incidence is equal to the angle of reflection.
ii) The incident ray, the reflected ray and normal at the point of incidence
all lie in the same plane.
Activity :- Take two pipes of the same length and arrange them on a
table near a wall or metal plate. Keep a clock near the open end of one
pipe and try to hear the sound of the clock through the other pipe by
adjusting the position of the pipe.
Now measure the angles of incidence
and reflection. Then lift the second
pipe and try to hear the sound.
It will be seen that the angle of
incidence is equal to the angle of
reflection. The incident ray, the
reflected ray and normal all lie in
the same plane.
7a) Echo :-
If we shout or clap near a reflecting surface like tall building or a
mountain, we hear the same sound again. This sound which we hear is
called echo. It is caused due to the reflection of sound.
To hear an echo clearly, the time interval between the original
sound and the echo must be at least 0.1 s.
Since the speed of sound in air is 344 m/s, the distance travelled by
sound in 0.I s = 344 m/s x 0.1 s = 34.4 m
So to hear an echo clearly, the minimum distance of the reflecting
surface should be half this distance, that is 17.2 m.
b) Reverberation :-
Echoes may be heard more than once due to repeated or multiple
reflections of sound from several reflecting surfaces. This causes
persistence of sound called reverberation.
In big halls or auditoriums to reduce reverberation, the roofs and
walls are covered by sound absorbing materials like compressed fibre
boards, rough plaster or draperies.
c) Uses of multiple reflection of sound :-
i) Megaphones, horns, musical instruments like trumpets, shehnais
etc. are deigned to send sound by multiple reflection in a particular
direction without spreading in all directions.
ii) Doctors listen to sounds from the human body through a
stethoscope. The sound of heartbeat reaches the doctor’s ears by
multiple reflection.
iii) Generally the ceilings of cinema halls and auditoriums are curved
so that sound after multiple reflection reaches all parts of the hall.
Sometimes a curved sound board is placed behind the stage so
that
sound after multiple reflection spreads evenly across the hall.
8) Range of Hearing :-
Human beings can hear sound frequencies between 20
Hz and 2000 Hz.
Sound whose frequency is less than 20 Hz is called
infrasonic sound. Animals like dogs, elephants, rhinoceros,
whales etc. produce and hear infrasonic sound.
Sound whose frequency is more than 2000 Hz is called
ultrasonic sound. Animals like dolphins, bats, rats
propoises etc. produce and hear ultrasonic sound.
Bats use reflection of ultrasonic sound waves to detect an
obstacle or its prey.
9) Uses of ultrasonic sound :-
i) Ultrasonic sound is used to clean objects like electronic
components. The components to be cleaned are kept in a
cleaning solution and ultrasonic waves are sent into the
solution. Due to the high frequency, the dirt particles get
detached from the components.
ii) Ultrasonic sound is used to detect cracks in metal
blocks. Ultrasonic waves are sent through the metal
blocks and if there are cracks, the waves are reflected
back and the cracks can be detected.
iii) Ultrasonic sound is used in ultra sound scanners for
getting images of internal organs of the human body.
iv) Ultrasonic sound is used to break small stones formed in
the kidneys into fine grains so that they are removed
through the urine.
10) SONAR :-
Sonar stands for Sound Navigation And Ranging. It is a device which
uses ultrasonic waves to measure distance, direction and speed of
underwater objects.
Sonar has a transmitter and a detector installed in ships. The
transmitter produces ultrasonic sound waves which travel through the
water and after striking the object in the sea bed is reflected back to the
detector.
The distance of the object can be calculated by knowing the speed of
sound in water and the time taken between the transmission and
reception of ultrasound.
If the time taken for the transmission and reception of ultra sound is t
and the distance travelled is 2d by the ultra sound, then 2d = v x t
or d = v x t
2
11) Structure of the human ear :-
The outer ear called pinna collects the sound waves. The sound
waves passes through the ear canal to a thin membrane called eardrum.
The eardrum vibrates. The vibrations are amplified by the three bones
of the middle ear called hammer, anvil and stirrup. The middle ear then
transmits the sound waves to the inner ear. In the inner ear the sound
waves are converted into electrical signals by the cochlea and sent to
the brain through the auditory nerves. The brain then interprets the
signals as sound.
Hammer
Anvil
Pinna Stirrup Cochlea