Scribd
Upload
46 views

Lecture - 7

This lecture discusses methods for analyzing axially loaded members, including: 1) Determining member displacement from applied loads using compatibility equations. 2) Calculating internal forces in statically indeterminate systems. 3) Computing stresses in axially loaded members made of different materials. Several examples demonstrate applying these methods to solve mechanics of materials problems involving axial loads on composite and indeterminate structures.

Uploaded by

Yohannes Mesfin
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
46 views

Lecture - 7

This lecture discusses methods for analyzing axially loaded members, including: 1) Determining member displacement from applied loads using compatibility equations. 2) Calculating internal forces in statically indeterminate systems. 3) Computing stresses in axially loaded members made of different materials. Several examples demonstrate applying these methods to solve mechanics of materials problems involving axial loads on composite and indeterminate structures.

Uploaded by

Yohannes Mesfin
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 16

Lecture - 7

1) To determine the displacement of


axially loaded member.

2) To find internal forces using


compatibility equations.

3) To determine stress within axially


loaded members.
The Shear Stress-Strain Diagram

  G

E
G
21  
Example:

An aluminum specimen shown in figure has


a diameter of d0 = 25mm and a gauge length
of L0 = 250mm. If a force of 165kN elongates
the gauge length of 1.20mm, determine the
modulus of elasticity. Also, determine by how
much the force causes the diameter of the
specimen to contact. Take Gal = 26 GPa and
 = 440 MPa.
Solution:
Example:
A rigid beam AB rests on the two short posts as shown in
figure, AC is made of steel and has a diameter of 20mm,
and BD is made of aluminum and has a diameter of 40mm.
Determine the displacement of point F on AB if a vertical
load of 90 kN is applied over this point. Take Est = 200
GPa, Eal = 70 GPa.
Solution:
Statically Indeterminate Axially Loaded Member

FB + F A – P = 0

A/B = 0
Example:

The aluminum post as shown in figure is


reinforced with a brass core. If this
assembly supports a resultant axial
compressive load of P = 45kN, applied
to the rigid cap, determine the average
normal stress in the aluminum and the
brass. Take Eal = 70 (103) MPa and Ebr =
105 (103) MPa.
Solution:
Equilibrium.

- 45 kN + Fal + Fbr = 0
Example:

The three A-36 steel bars as


shown in figure are pin
connected to a rigid member. If
the applied load on the member
is 15 kN, determine the force
developed in each bar. Bars AB
and EF each have a cross-
sectional area of 25 mm2, and
bar CD has a cross-sectional
area of 15 mm2.
Solution:

You might also like