IP Addresses
IP Addresses:
Classful Addressing
CONTENTS
• INTRODUCTION
• CLASSFUL ADDRESSING
• Different Network Classes
• Subnetting
• Classless Addressing
• Supernetting
•CIDR (classless Interdomain Routing)
4.1
INTRODUCTION
What is an IP Address?
An IP address is a
32-bit
address.
The IP addresses
are
unique.
Address Space
…………..
addr1 …………..
addr15
addr2 ………….. …………..
…………..
addr41 addr226
addr31
………….. …………..
Address space rule
…………..
addr1 …………..
addr15
Theaddr2 …………..
address space in a protocol
…………..
…………..
That uses N-bits to define an
Address is: addr41 addr226
addr31
………….. 2N …………..
IPv4 address space
The address space of IPv4 is
232
or
4,294,967,296.
Binary Notation
01110101 10010101 00011101 11101010
Figure 4-1
Dotted-decimal notation
Hexadecimal Notation
0111 0101 1001 0101 0001 1101 1110 1010
75 95 1D EA
0x75951DEA
Example 1
Change the following IP address from binary
notation to dotted-decimal notation.
10000001 00001011 00001011 11101111
Solution
129.11.11.239
Example 2
Change the following IP address from
dotted-decimal notation to binary
notation:
111.56.45.78
Solution
01101111 00111000 00101101 01001110
Example 3
Find the error in the following IP Address
111.56.045.78
Solution
There are no leading zeroes in
Dotted-decimal notation (045)
Example 3 (continued)
Find the error in the following IP Address
75.45.301.14
Solution
In decimal notation each number <= 255
301 is out of the range
Example 4
Change the following binary IP address
Hexadecimal notation
10000001 00001011 00001011 11101111
Solution
0X810B0BEF or 810B0BEF16
CLASSFUL
ADDRESSING
Figure 4-2
Occupation of the address space
In classful addressing the address space is
divided into 5 classes:
A, B, C, D, and E.
Figure 4-3
Finding the class in binary notation
Figure 4-4
Finding the address class
Example 5
Show that Class A has
231 = 2,147,483,648 addresses
Example 6
Find the class of the following IP addresses
00000001 00001011 00001011 11101111
11000001 00001011 00001011 11101111
Solution
•00000001 00001011 00001011 11101111
1st is 0, hence it is Class A
•11000001 00001011 00001011 11101111
1st and 2nd bits are 1, and 3rd bit is 0 hence, Class C
Figure 4-5
Finding the class in decimal notation
Example 7
Find the class of the following addresses
158.223.1.108
227.13.14.88
Solution
•158.223.1.108
1st byte = 158 (128<158<191) class B
•227.13.14.88
1st byte = 227 (224<227<239) class D
IP address with appending port
number
158.128.1.108:25
the for octet before colon is the IP address
The number of colon (25) is the port number
Figure 4-6
Netid and hostid
Figure 4-7
Blocks in class A
Millions of class A addresses
are wasted.
Figure 4-8
Blocks in class B
Many class B addresses
are wasted.
Figure 4-9
Blocks in class C
The number of addresses in
a class C block
is smaller than
the needs of most organizations.
Class D addresses
are used for multicasting;
there is only
one block in this class.
Class E addresses are reserved
for special purposes;
most of the block is wasted.
Network Addresses
The network address is the first address.
The network address defines the network to the
rest of the Internet.
Given the network address, we can find the
class of the address, the block, and the range of
the addresses in the block
In classful addressing,
the network address
(the first address in the block)
is the one that is assigned
to the organization.
Example 8
Given the network address 132.21.0.0, find the
class, the block, and the range of the addresses
Solution
The 1st byte is between 128 and 191.
Hence, Class B
The block has a netid of 132.21.
The addresses range from
132.21.0.0 to 132.21.255.255.
Mask
• A mask is a 32-bit binary number.
• The mask is ANDeD with IP address to get
• The bloc address (Network address)
• Mask And IP address = Block Address
Figure 4-10
Masking concept
Figure 4-11
AND operation
The network address is the
beginning address of each block.
It can be found by applying
the default mask to
any of the addresses in the block
(including itself).
It retains the netid of the block
and sets the hostid to zero.
Default Mak
Class A default mask is 255.0.0.0
Class B default mask is 255.255.0.0
Class C Default mask 255.255.255.0
Chapter 5
Subnetting/Supernetting
and
Classless Addressing
CONTENTS
• SUBNETTING
• SUPERNETTING
• CLASSLESS ADDRSSING
5.1
SUBNETTING
IP addresses are designed with
two levels of hierarchy.
Figure 5-1
A network with two levels of
hierarchy (not subnetted)
Figure 5-2
A network with three levels of
hierarchy (subnetted)
Note
Subnetting is done by borrowing bits from the
host part and add them the network part
Figure 5-3
Addresses in a network with
and without subnetting
Figure 5-5
Default mask and subnet mask
Finding the Subnet Address
Given an IP address, we can find the
subnet address the same way we found the
network address. We apply the mask to the
address. We can do this in two ways:
straight or short-cut.
Straight Method
In the straight method, we use binary
notation for both the address and the
mask and then apply the AND operation
to find the subnet address.
Example 9
What is the subnetwork address if the
destination address is 200.45.34.56 and the
subnet mask is 255.255.240.0?
Solution
11001000 00101101 00100010 00111000
11111111 11111111 11110000 00000000
11001000 00101101 00100000 00000000
The subnetwork address is 200.45.32.0.
Short-Cut Method
** If the byte in the mask is 255, copy
the byte in the address.
** If the byte in the mask is 0, replace
the byte in the address with 0.
** If the byte in the mask is neither 255
nor 0, we write the mask and the address
in binary and apply the AND operation.
Example 10
What is the subnetwork address if the
destination address is 19.30.80.5 and the
mask is 255.255.192.0?
Solution
See next slide
Figure 5-6
Solution
Figure 5-7
Comparison of a default mask and
a subnet mask
The number of subnets must be
a power of 2.
Example 11
A company is granted the site address
201.70.64.0 (class C). The company needs
six subnets. Design the subnets.
Solution
The number of 1s in the default
mask is 24 (class C).
Solution (Continued)
The company needs six subnets. This number
6 is not a power of 2. The next number that is
a power of 2 is 8 (23). We need 3 more 1s in
the subnet mask. The total number of 1s in
the subnet mask is 27 (24 3).
The total number of 0s is 5 (32 27). The
mask is
Solution (Continued)
11111111 11111111 11111111 11100000
or
255.255.255.224
The number of subnets is 8.
The number of addresses in each subnet is 25 (5 is the
number of 0s) or 32.
Figure 5-8
Example 3
Example 12
A company is granted the site address
181.56.0.0 (class B). The company needs
1000 subnets. Design the subnets.
Solution
The number of 1s in the default mask is 16
(class B).
Solution (Continued)
The company needs 1000 subnets. Thi
number is not a power of 2. The next numbe
that is a power of 2 is 1024 (210). We need 10
more 1s in the subnet mask.
The total number of 1s in the subnet mask i
26 (16 10).
The total number of 0s is 6 (32 26).
Solution (Continued)
The mask is
11111111 11111111 11111111 11000000
or
255.255.255.192.
The number of subnets is 1024.
The number of addresses in each subnet is 26
(6 is the number of 0s) or 64.
See next slide
5.3
CLASSLESS
ADDRESSING
Figure 5-13
Variable-length blocks
Number of Addresses in a Block
There is only one condition on the number
of addresses in a block; it must be a power
of 2 (2, 4, 8, . . .). A household may be
given a block of 2 addresses. A small
business may be given 16 addresses. A large
organization may be given 1024 addresses.
Beginning Address
The beginning address must be evenly divisible
by the number of addresses. For example, if a
block contains 4 addresses, the beginning
address must be divisible by 4. If the block has
less than 256 addresses, we need to check only
the rightmost byte. If it has less than 65,536
addresses, we need to check only the two
rightmost bytes, and so on.
Example 16
Which of the following can be the beginning address of a block
that contains 1024 addresses?
205.16.37.32
190.16.42.0
17.17.32.0
123.45.24.52
Solution
To be divisible by 1024, the rightmost byte of an address should be
0 and the second rightmost byte must be divisible by 4. Only the
address 17.17.32.0 meets this condition.
Figure 5-14
Slash notation
Slash notation is also called
CIDR
notation.
Example 17
A small organization is given a block with the beginning
address and the prefix length 205.16.37.24/29 (in slash
notation). What is the range of the block?
Solution
The beginning address is 205.16.37.24. To
find the last address we keep the first 29 bits
and change the last 3 bits to 1s.
Beginning: 11001111 00010000 00100101 00011000
Ending : 11001111 00010000 00100101 00011111
There are only 8 addresses in this block.
Example 17 cont’d
We can find the range of addresses in Example 17 by
another method. We can argue that the length of the
suffix is 32 29 or 3. So there are 23 8 addresses in this
block. If the first address is 205.16.37.24, the last address
is 205.16.37.31 (24 7 31).
A block in classes A, B, and C
can easily be represented in slash
notation as
A.B.C.D/ n
where n is
either 8 (class A), 16 (class B), or
24 (class C).
Example 18
What is the network address if one of the addresses is
167.199.170.82/27?
Solution
The prefix length is 27, which means that we must
keep the first 27 bits as is and change the
remaining bits (5) to 0s. The 5 bits affect only the
last byte. The last byte is 01010010. Changing the
last 5 bits to 0s, we get 01000000 or 64. The
network address is 167.199.170.64/27.
Example 19
An organization is granted the block 130.34.12.64/26. The
organization needs to have four subnets. What are the subnet
addresses and the range of addresses for each subnet?
Solution
The suffix length is 6. This means the total number
of addresses in the block is 64 (2 6). If we create
four subnets, each subnet will have 16 addresses.
Solution (Continued)
Let us first find the subnet prefix (subnet mask). We need four
subnets, which means we need to add two more 1s to the site prefix.
The subnet prefix is then /28.
Subnet 1: 130.34.12.64/28 to 130.34.12.79/28.
Subnet 2 : 130.34.12.80/28 to 130.34.12.95/28.
Subnet 3: 130.34.12.96/28 to 130.34.12.111/28.
Subnet 4: 130.34.12.112/28 to 130.34.12.127/28.
See Figure 5.15
Figure 5-15
Example 19 cont’d
Example 20
An ISP is granted a block of addresses starting with
190.100.0.0/16. The ISP needs to distribute these addresses to three
groups of customers as follows:
1. The first group has 64 customers; each needs 256 addresses.
2. The second group has 128 customers; each needs 128 addresses.
3. The third group has 128 customers; each needs 64 addresses.
Design the subblocks and give the slash notation for each subblock.
Find out how many addresses are still available after these
allocations.
Solution
Group 1
For this group, each customer needs 256 addresses. This means th
suffix length is 8 (28 256). The prefix length is then 32 8 24.
01: 190.100.0.0/24190.100.0.255/24
02: 190.100.1.0/24 190.100.1.255/24
…………………………………..
64: 190.100.63.0/24190.100.63.255/24
Total 64 256 16,384
Solution (Continued)
Group 2
For this group, each customer needs 128 addresses. This means the
suffix length is 7 (27 128). The prefix length is then 32 7 25
The addresses are:
001: 190.100.64.0/25 190.100.64.127/25
002: 190.100.64.128/25 190.100.64.255/25
………………..
128: 190.100.127.128/25 190.100.127.255/25
Solution (Continued)
Group 3
For this group, each customer needs 64 addresses. This means the
suffix length is 6 (26 64). The prefix length is then 32 6 26.
001:190.100.128.0/26 190.100.128.63/26
002:190.100.128.64/26 190.100.128.127/26
…………………………
128:190.100.159.192/26 190.100.159.255/26
Total 128 64 8,192
Solution (Continued)
Number of granted addresses: 65,536
Number of allocated addresses: 40,960
Number of available addresses: 24,576
