After studying this appendix, you will be able to: • Make and interpret a scatter diagram • Identify linear and nonlinear relationships and relationships that have a maximum and a minimum • Define and calculate the slope of a line • Graph relationships among more than two variables
Graphing Data (1 of 11) – A graph reveals a relationship. – A graph represents “quantity” as a distance. – A two-variable graph uses two perpendicular scale lines. – The vertical line is the y-axis. – The horizontal line is the x-axis. – The zero point in common to both axes is the origin.
Graphing Data (3 of 11) – To plot a point 6,194 m above sea level at 10 degrees, we need the x-value and the y-value of the point. – Point A shows an x-value of 10 degrees C. – Point B shows a y-value of 6,194 m above sea level. – Point C plot a point 6,194 m above sea level when the temperature is 10 degrees C.
Graphing Data (4 of 11) – Economists measure variables that describe what, how, and for whom goods and services are produced. – These variables are quantities produced and prices. – Figure A1.2 shows two examples of economic graphs. – Figure A1.2 shows how to make an economics graph. – Point A tells us the quantity of tickets bought in 2019 and the average price of a ticket. – You can “read” this graph as telling you that in 2019: – 1.2 billion movie tickets were bought at a price of $9.11 a ticket.
Graphing Data (6 of 11) • Scatter Diagrams – A scatter diagram plots the value of one variable against the value of another variable for a number of different values of each variable. – A scatter diagram reveals whether a relationship exists between the two variables. – Figure A1.3 shows the production budget for ten popular movies and their worldwide box office revenues.
Graphing Data (7 of 11) – The table gives the data and the graph describes the relationship between each movie’s production budget and its box office revenue. – Point A tells us that Star Wars Ep. VII: The Force Awakens cost $306 million to produce and brought in $2,059 million at the box office. – The pattern of the points reveal that there is no clear tendency for a larger production budget to bring a greater box office revenue.
Graphing Data (9 of 11) – Figure A1.4(a) is a scatter diagram of income and expenditure in Canada, on average, from 2008 to 2018. – Point A shows that in 2014, income was $46,000 and expenditure was $31,000. – The graph shows that as income increases, so does expenditure, and the relationship is a close one.
Graphing Data (10 of 11) – Figure A1.4(b) is a scatter diagram of inflation and unemployment in Canada from 2009 to 2019. – The points show no relationship between the two variables. – For example, when unemployment as high, inflation was high in 2011 and low in 2009.
Graphs Used in Economic Data (1 of 9) – Graphs are used in economic models to show the relationship between variables. – The patterns to look for in graphs are the four cases in which ▪ Variables move in the same direction. ▪ Variables move in opposite directions. ▪ Variables have a maximum or a minimum. ▪ Variables are unrelated.
Graphs Used in Economic Data (2 of 9) • Variables That Move in the Same Direction – A relationship between two variables that move in the same direction is called a positive relationship or a direct relationship. – A line that slopes upward shows a positive relationship. – A relationship shown by a straight line is called a linear relationship. – The three graphs on the next slide show positive relationships.
Graphs Used in Economic Data (4 of 9) • Variables That Move in Opposite Directions – A relationship between two variables that move in opposite directions is called a negative relationship or an inverse relationship. – A line that slopes downward shows a negative relationship. – The three graphs on the next slide show negative relationships.
Graphs Used in Economic Data (6 of 9) • Variables That Have a Maximum or a Minimum – The two graphs on the next slide show relationships that have a maximum and a minimum. – These relationships are positive over part of their range and negative over the other part.
Graphs Used in Economic Data (8 of 9) • Variables That are Unrelated – Sometimes, we want to emphasize that two variables are unrelated. – The two graphs on the next slide show examples of variables that are unrelated.
The Slope of a Relationship (1 of 9) – The slope of a relationship is the change in the value of the variable measured on the y-axis divided by the change in the value of the variable measured on the x-axis. – We use the Greek letter Δ (capital delta) to represent “change in.” – So Δy means the change in the value of the variable measured on the y-axis and Δx means the change in the value of the variable measured on the x-axis. – Slope equals Δy/Δx.
The Slope of a Relationship (3 of 9) • The Slope of a Straight Line – The slope of a straight line is constant. – Graphically, the slope is calculated as the “rise” over the “run.” – The slope is positive if the line is upward sloping. – The slope is negative if the line is downward sloping.
The Slope of a Relationship (5 of 9) • The Slope of a Curved Line – The slope of a curved line at a point varies depending on where along the curve it is calculated. – We can calculate the slope of a curved line either at a point or across an arc. • Slope at a Point – The slope of a curved line at a point is equal to the slope of a straight line that is the tangent to that point. – Here, we calculate the slope of the curve at point A.
The Slope of a Relationship (7 of 9) • Slope Across an Arc – The average slope of a curved line across an arc is equal to the slope of a straight line that joins the endpoints of the arc. – Here, we calculate the average slope of the curve along the arc BC.
Graphing Relationships Among More Than Two Variables (1 of 4) – When a relationship involves more than two variables, we can plot the relationship between two of the variables by holding other variables constant—by using ceteris paribus. – Ceteris paribus means “if all other relevant things remain the same.” – Figure A1.12 shows a relationship among three variables. – The table gives the quantity of ice cream consumed at different prices as the temperature varies.
Graphing Relationships Among More Than Two Variables (3 of 4) • Ceteris Paribus – To plot this relationship we hold the temperature at 21°C. – At $2.75 a scoop, 10 litres are consumed. – We can also plot this relationship by holding the temperature constant at 32°C. – At $2.75 a scoop, 20 litres are consumed. – When temperature is constant at 21°C and the price of ice cream changes, there is a movement along the blue curve.
Graphing Relationships Among More Than Two Variables (4 of 4) – When temperature is constant at 32°C and the price of ice cream changes, there is a movement along the red curve. • When Other Things Change – The temperature is held constant along each curve, but in reality the temperature can change. – When the temperature rises from 21°C to 32°C, the curve showing the relationship shifts rightward from the blue curve to the red curve.